Cobalt(II)-Catalyzed Synthesis of γ-Diketones from Aryl Alkenes and Its Utilization in the Synthesis of Various Heterocyclic Compounds

An earth-abundant Co(II) salt-catalyzed mild and affordable synthetic route has been developed for the synthesis of industrially relevant 1,4-dicarbonyl compounds (or γ-diketones) via oxidative coupling between aryl alkenes and ketones (both cyclic and acyclic) using TBHP and DBU as the oxidant and base, respectively. 1,4-Dicarbonyl compounds are known to be synthesized using expensive metal catalysts, dual catalysts, or low-cost metal complexes combined with an additive or ligand template, which further needs to be synthesized. Herein, we report the synthesis of 1,4-dicarbonyl compounds using cobalt(II) acetate as a catalyst without any expensive co-catalyst or ligand templates. This methodology has a broad substrate scope with significant yields and good functional group tolerance. Generation of unsymmetrical 1,4-dicarbonyls at room temperature and its versatile synthetic expansion to produce synthetically and biologically valuable heterocyclic compounds are salient features of this novel methodology. In addition, various controlled experiments such as primary kinetic isotope effect study, Hammett analysis with variation of the nature of the substituents on the styrene ring, and theoretical calculations (density functional theory) unravel the mechanistic intricacies involved in this new, simple, and atom-economic methodology.

Rhodium(III)-Catalyzed Oxidative 1,3-Aryl Migration of α-Aryl Allylic Alcohols

A Rh(III)-catalyzed oxidative 1,3-aryl migration of α-arylallylic alcohols via Csp2-Csp3 σ bond activation has been developed. This method provides an efficient strategy to allow for allylic alcohol-based skeleton rearrangement, in which various secondary and tertiary α-arylallylic alcohols are rapidly converted to β-aryl-α, β-unsaturated ketones and aldehydes.

Solvent-Controllable C-F Bond Activation for Masked Formylation of α-Trifluoromethyl Alkenes via Organo-Photoredox Catalysis

A solvent-controllable organo-photoredox-catalyzed C-F bond activation for masked formylation of α-trifluoromethyl alkenes with low-priced 1,3-dioxolane as masked formyl radical equivalent has been described. Consequently, a diversity of masked formylated gem-difluoroalkenes and monofluoroalkenes are constructed in moderate to high yields. This approach merits readily available starting materials, mild reaction conditions, and broad substrate scope. The feasibility of this approach has been highlighted by the one-pot masked formylation/hydrolysis sequence to form γ,γ-difluoroallylic aldehydes and late-stage modification of pharmaceutical and natural product derivatives.

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp3)-H to construct C-C bonds

Ether derivatives are widespread as essential building blocks in various drugs, natural products, agrochemicals, and materials. Modern economy requires developing green strategies with improved efficiency and reduction of waste. Due to its atom and step-economy, the cross-dehydrogenative coupling (CDC) reaction has become a major strategy for ether functionalization. This review covers C-H/C-H cross-coupling reactions of ether derivatives with various C-H bond substrates via non-noble metal catalysts (Fe, Cu, Co, Mn, Ni, Zn, Y, Sc, In, Ag). We discuss advances achieved in these CDC reactions and hope to attract interest in developing novel methodologies in this field of organic chemistry.

Carboazidation of Terminal Alkenes with Trimethylsilyl Azide and Cyclic Ethers Catalyzed by Copper Powder under Oxidative Conditions

Copper-catalyzed carboazidation of alkenes with trimethylsilyl azide and cyclic ethers has been achieved. The employment of naturally abundant copper catalysts allowed cyclic ethers to be used as alkylating reagents under oxidative conditions. The use of styrene derivatives and 1,1-diaryl alkenes afforded carboazidation products. In addition, application of five- and six-membered cyclic ethers to the present reaction gave target organic molecules bearing azide and cyclic ether groups with perfect regioselectivity. Radical trapping and clock experiments revealed that the present reaction proceeded via the radical pathway. To further demonstrate the utility of this carboazidation reaction, transformations from the azide group to the related nitrogen-containing compounds were also performed.

Radical selenation of C(sp3)-H bonds to asymmetric selenides and mechanistic study

Selenides are important structural motifs with a broad range of biological activities and versatile transformational abilities. In this study, a novel and mild method was developed for the facile synthesis of asymmetric selenides under metal-free conditions. The key features of this reaction include good functional-group tolerance, the use of readily available reagents and cheap, low-toxicity solvent, and amenability to gram-scale synthesis. The results of preliminary radical-trapping experiments and a kinetic isotope effect study support a radical process.

Functionalisation of ethereal-based saturated heterocycles with concomitant aerobic C–H activation and C–C bond formation

Herein we disclose a novel method for the aerobic C–H activation of ethereal-based heterocycles to generate various α-functionalised building blocks.

Copper-Catalyzed Direct Allenylation of Inactive Cyclic Ethers

We report here a direct allenylation reaction of inactive cyclic ethers. The reaction proceeds through a copper-catalyzed 1,4-difunctionalization of 1,3-enynes, with cyano group installed at the allenes simultaneously. This methodology shows a broad functional group compatibility to 1,3-enynes. Diversified allene-modified cyclic ether derivatives were synthesized with high regioselectivity under mild conditions.

Metal-free visible-light-promoted C(sp3)-H functionalization of aliphatic cyclic ethers using trace O2

Presented is a light-promoted C-C bond forming reaction yielding sulfone and phosphate derivatives at room temperature in the absence of metals or photoredox catalyst. This transformation proceeds in neat conditions through an auto-oxidation mechanism which is maintained through the leaching of trace amounts of O2 as sole green oxidant.

Combustion-Synthesized Porous CuO-CeO2-SiO2 Composites as Solid Catalysts for the Alkenylation of C(sp3)-H Bonds Adjacent to a Heteroatom via Cross-Dehydrogenative Coupling

A series of mixed oxides of CuO, CeO2, and SiO2 were prepared by gel combustion and employed for the first time as efficient solid catalysts in a solvent-less liquid-phase cross-dehydrogenative coupling. The facile one-pot catalyst synthesis resulted in highly porous materials presenting large specific surface areas and strong metal–support interactions. The interaction with highly dispersed CeO2 enhanced the redox properties of the CuO species. The CuO-CeO2-SiO2 composites exhibited excellent catalytic performance for the selective coupling between 1,1-diphenylethylene and tetrahydrofuran with a yield up to 85% of 2-(2,2-diphenylvinyl)-tetrahydrofuran in the presence of di-tert-butyl peroxide (DTPB) and KI. Albeit both CuO and CeO2 species are proved to be responsible for the catalytic conversion, a great synergistic improvement in the catalytic activity was obtained by extended contact between the oxide phases by high porosity in comparison with the reactions using individual Cu or Ce catalysts. The activity of the composite catalyst was shown to be highly stable after five successive reaction cycles. Furthermore, the study scope was extended to the synthesis of different derivatives via composite-catalyzed coupling of C(sp2)-H with C(sp3-H) adjacent to a heteroatom. The good yields recorded proved the general validity of this composite for the cross-dehydrogenative coupling reaction rarely performed on solid catalysts.

Direct, Site-Selective and Redox-Neutral α-C-H Bond Functionalization of Tetrahydrofurans via Quantum Dots Photocatalysis

As one of the most ubiquitous bulk reagents available, the intrinsic chemical inertness of tetrahydrofuran (THF) makes direct and site-selective C(sp³ )-H bond activation difficult, especially under redox neutral condition. Here, we demonstrate that semiconductor quantum dots (QDs) can activate α-C-H bond of THF via forming QDs/THF conjugates. Under visible light irradiation, the resultant alkoxyalkyl radical directly engages in radical cross-coupling with α-amino radical from amino C-H bonds or radical addition with alkene or phenylacetylene, respectively. In contrast to stoichiometric oxidant or hydrogen atom transfer reagents required in previous studies, the scalable benchtop approach can execute α-C-H bond activation of THF only by a QD photocatalyst under redox-neutral condition, thus providing a broad of value added chemicals starting from bulk THFs reagent.

Direct functionalization of cyclic ethers with maleimide iodides via free radial-mediated sp3 C-H activation

Cyclic ethers are important scaffolds employed in the synthesis of various natural products and pharmaceutical ingredients. A novel free radical-initiated reaction between cyclic ethers and maleimide iodides through C-H activation is developed, avoiding the use of transition metallic catalysts. This method provides a simple approach to derive cyclic ethers, which were further applied in various cross coupling reactions.

Alkylative Dearomatization by Using an Unactivated Aryl Nitro Group as a Leaving Group: Access to Diversified Alkylated Spiro[5.5]trienones

The cleavage of an unactivated aryl nitro group triggered by alkyl radicals enables a dearomative cyclization, affording diversified alkylated spiro[5.5]trienones in good yields. Using readily available compounds (toluene and analogues, alkanes, ethers, ketones, etc.) as alkylating reagents, various alkyls have been implanted into the spirocycles via C(sp³)-H and Ar-NO₂ bond activation with high functional group tolerance. This protocol provides a distinct method for the activation of the aryl nitro group.

Quinoline-Fused Lactones via Tandem Oxidation Cyclization: Metal-Free sp3 C-H Functionalization

A unique lactonization of 2-methyl-3-acyl-4-phenylquinolines using PhIO as the oxidant and selectfluor as an additive is reported. The reaction occurs under ambient conditions through tandem oxidation and cyclization of sp³ C-H bonds under metal-free conditions. The heterocycle-fused lactones are obtained in moderate to good yield.

Photoinduced site-selective alkenylation of alkanes and aldehydes with aryl alkenes

The dehydrogenative alkenylation of C-H bonds with alkenes represents an atom- and step-economical approach for olefin synthesis and molecular editing. Site-selective alkenylation of alkanes and aldehydes with the C-H substrate as the limiting reagent holds significant synthetic value. We herein report a photocatalytic method for the direct alkenylation of alkanes and aldehydes with aryl alkenes in the absence of any external oxidant. A diverse range of commodity feedstocks and pharmaceutical compounds are smoothly alkenylated in useful yields with the C-H partner as the limiting reagent. The late-stage alkenylation of complex molecules occurs with high levels of site selectivity for sterically accessible and electron-rich C-H bonds. This strategy relies on the synergistic combination of direct hydrogen atom transfer photocatalysis with cobaloxime-mediated hydrogen-evolution cross-coupling, which promises to inspire additional perspectives for selective C-H functionalizations in a green manner.

Alkylarylation of N-allylbenzamides and N-allylanilines with simple ethers for the direct construction of ether substituted dihydroisoquinolinones and indolines

A radical-initiated cascade addition and cyclization of N-allylbenzamides with simple ethers to construct ether-substituted dihydroisoquinolinones was performed in the presence of CuI. The cleavage of the sp³ C-H bond in ether and the sp² C-H bond in phenyl was involved in this reaction. Moreover, the arylalkylation of N-allylanilines was also realized under similar reaction conditions, providing ether-functionalized indolines in good to moderate yields.

Base-promoted domino radical cyclization of 1,6-enynes

A good regioselective, high atom-economical and transition-metal-free method for the synthesis of α-functionalized ether derivatives via the domino radical cyclization of 1,6-enynes is described. A series of α-functionalized ether derivatives could be easily obtained in good yields with wide functional group tolerance by using less toxic and inexpensive Cs₂CO₃ as the base. The control experiment results show that the reaction involves a radical process. This strategy provides a regioselective way toward the formation of dual C-C bonds in one step.

Diacetyl as a "traceless" visible light photosensitizer in metal-free cross-dehydrogenative coupling reactions

Minisci alkylation is of prime importance for its applicability in functionalizing diverse heteroarenes, which are core structures in many bioactive compounds. In alkyl radical generation processes, precious metal catalysts, high temperatures and excessive oxidants are generally involved, which lead to sustainability and safety concerns. Herein we report a new strategy using diacetyl (2,3-butanedione) as an abundant, visible light-sensitive and "traceless" hydrogen atom abstractor to achieve metal-free cross-dehydrogenative Minisci alkylation under mild conditions. Mechanistic studies supported hydrogen atom transfer (HAT) between an activated C(sp3)-H substrate and diacetyl. Moreover, with the assistance of di-tert-butyl peroxide (DTBP), the scope of the reaction could be extended to strong aliphatic C-H bonds via diacetyl-mediated energy transfer. The robustness of this strategy was demonstrated by functionalizing complex molecules such as quinine, fasudil, nicotine, menthol and alanine derivatives.

Copper-Catalyzed Oxidative C-H Bond Functionalization of N-Allylbenzamide for Regioselective C-N and C-O Bond Formation

Copper-catalyzed oxidative couplings of N-allylbenzamides for C-N and C-O bond formations have been developed through C-H bond functionalization. To demonstrate the utility of this approach, it was applied to the synthesis of β-aminoimides and imides. To the best of our knowledge, these are the first examples in which different classes of N-containing compounds have been directly prepared from the readily available N-allylbenzamides using an inexpensive catalyst/oxidant/base (CuSO₄ /TBHP/Cs₂ CO₃ ) system.

Direct C-4 alkylation of quinazoline N-oxides with ethers via an oxidative cross-coupling reaction under metal-free conditions

A novel and efficient protocol for the direct C-4 alkylation of quinazoline-3-oxides via radical oxidative coupling between quinazoline 3-oxides and ethers in the presence of TBHP was developed. The reaction proceeded smoothly under metal-free conditions, which provided quinazoline-containing heterocyclic molecules in moderate to good yields.

Mechanistic view of Ru-catalyzed C-H bond activation and functionalization: computational advances

Ru-Catalyzed aromatic C-H bond activation and functionalization have emerged as important topics because they have resulted in remarkable progress in organic synthesis. Both experimental and theoretical studies of their mechanisms are important for the design of new synthetic methodologies. In this review, a mechanistic view of the Ru-mediated C-H bond cleavage step is first given to reveal the C-H bond activation modes, including oxidative addition, metathesis and base-assisted deprotonation. In this process, directing groups play an important role in determining the reactivity of the C-H bond. The C-H bond activation generally leads to the formation of a Ru-C bond, which is further functionalized in the subsequent steps. The mechanisms of Ru-catalyzed arylation, alkylation, and alkenylation of arenes are summarized, and these transformations can be categorized into cross-coupling with electrophiles or oxidative coupling with nucleophiles. In addition, the mechanism of ortho-ruthenation-enabled remote C-H bond functionalization is also discussed.

Regioselective Copper-Catalyzed Oxidative Coupling of α-Alkylated Styrenes with Tertiary Alkyl Radicals

A radical-mediated oxidative cross-coupling of readily accessible α-alkylated styrenes with 1,3-dicarbonyl compounds utilizing a combination of Cu(OAc)₂ and air as a catalytic system is described. Rather than requiring α-halocarbonyl compounds, this efficient approach enables direct installation of tertiary functionalized alkyl motifs to olefins with simple carbonyl derivatives. The novel protocol is characterized with high allylic selectivities via a competing β-H elimination. Both radical-clock and -trapping experiments provided clear-cut evidence for the intermediacy of an α-keto carbon-centered radical.

Radical Cation Salt-initiated Aerobic C-H Phosphorylation of N-Benzylanilines: Synthesis of α-Aminophosphonates

A radical cation salt-initiated phosphorylation of N-benzylanilines was realized through an aerobic oxidation of the sp3 C-H bond, providing a series of α-aminophosphonates in high yields. An investigation of the reaction scope revealed that this mild catalyst system is superior in good functional group tolerance and high reaction efficiency. The mechanistic study implied that the cleavage of the sp3 C-H bond was involved in the rate-determining step.