Catalytic hydroxylation of benzene and toluene by an iron complex bearing a chelating di-pyridyl-di-NHC ligand

Aggregation-Driven Photoinduced α-C(sp3)-H Bond Hydroxylation/C(sp3)-C(sp3) Coupling of Boron Dipyrromethene Dye in Water Reported by Near-Infrared Emission

Molecular aggregation is a powerful tool for tuning advanced materials' photophysical and electronic properties. Here we present a novel potential for the aqueous-solvated aggregated state of boron dipyrromethene (BODIPY) to facilitate phototransformations otherwise achievable only under harsh chemical conditions. We show that the photoinduced symmetry-breaking charge separation state can itself initiate catalyst-free redox chemistry, leading to selective α-C(sp3)-H bond activation/Csp3-Csp3 coupling on the BODIPY backbone. The photoproduction progress was tracked by monitoring the evolution of the strong Stokes-shifted near-infrared emission, resulting from selective self-assembly of the terminal heterodimeric photoproduct into well-ordered J-aggregates, as revealed by X-ray structural analysis. These findings provide a facile and green route to further explore the promising frontier of packing-triggered selective photoconversions via supramolecular engineering.

DFT Mechanistic Investigation into Ni(II)-Catalyzed Hydroxylation of Benzene to Phenol by H2O2

Introduction of oxygen into aromatic C-H bonds is intriguing from both fundamental and practical perspectives. Although the 3d metal-catalyzed hydroxylation of arenes by H2O2 has been developed by several prominent researchers, a definitive mechanism for these crucial transformations remains elusive. Herein, density functional theory calculations were used to shed light on the mechanism of the established hydroxylation reaction of benzene with H2O2, catalyzed by [NiII(tepa)]2+ (tepa = tris[2-(pyridin-2-yl)ethyl]amine). Dinickel(III) bis(μ-oxo) species have been proposed as the key intermediate responsible for the benzene hydroxylation reaction. Our findings indicate that while the dinickel dioxygen species can be generated as a stable structure, it cannot serve as an active catalyst in this transformation. The calculations allowed us to unveil an unprecedented mechanism composed of six main steps as follows: (i) deprotonation of coordinated H2O2, (ii) oxidative addition, (iii) water elimination, (iv) benzene addition, (v) ketone generation, and (vi) tautomerization and regeneration of the active catalyst. Addition of benzene to oxygen, which occurs via a radical mechanism, turns out to be the rate-determining step in the overall reaction. This study demonstrates the critical role of Ni-oxyl species in such transformations, highlighting how the unpaired spin density value on oxygen and positive charges on the Ni-O• complex affect the activation barrier for benzene addition.

Bio-inspired Cu(II) amido-quinoline complexes as catalysts for aromatic C-H bond hydroxylation

Cu(II) complexes supported by tetradentate amido-quinoline acyclic ligands (L1 & L2) have been synthesized, characterized, and employed as catalysts for aromatic C-H hydroxylation using H₂O₂ as an oxidant in the absence of an external base with a high selectivity of around 90% for phenols via the non-radical pathway (TON ≥720). The KIE value, various spectroscopic studies and DFT calculation supported the involvement of Cu(II)-OOH species.

Organometallic 3d transition metal NHC complexes in oxidation catalysis

The development of processes for the selective oxidation of hydrocarbons is a major focus in catalysis research. Making this process simultaneously environmentally friendly is still challenging. 3d transition metals are...

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Insight into the chemoselective aromatic vs. side-chain hydroxylation of alkylaromatics with H2O2 catalyzed by a non-heme imine-based iron complex

Side-chain/ring oxygenated product ratio increases upon decreasing the benzylic bond dissociation energy in the oxidation of alkylaromatics with H₂O₂ catalyzed by an imine-based iron complex.

Increasing the steric hindrance around the catalytic core of a self-assembled imine-based non-heme iron catalyst for C-H oxidation

Sterically hindered imine-based non-heme complexes 4 and 5 rapidly self-assemble in acetonitrile at 25 °C, when the corresponding building blocks are added in solution in the proper ratios. Such complexes are investigated as catalysts for the H2O2 oxidation of a series of substrates in order to ascertain the role and the importance of the ligand steric hindrance on the action of the catalytic core 1, previously shown to be an efficient catalyst for aliphatic and aromatic C-H bond oxidation. The study reveals a modest dependence of the output of the oxidation reactions on the presence of bulky substituents in the backbone of the catalyst, both in terms of activity and selectivity. This result supports a previously hypothesized catalytic mechanism, which is based on the hemi-lability of the metal complex. In the active form of the catalyst, one of the pyridine arms temporarily leaves the iron centre, freeing up a lot of room for the access of the substrate.

Iron-Based Catalytically Active Complexes in Preparation of Functional Materials

Iron complexes are particularly interesting as catalyst systems over the other transition metals (including noble metals) due to iron’s high natural abundance and mediation in important biological processes, therefore making them non-toxic, cost-effective, and biocompatible. Both homogeneous and heterogeneous catalysis mediated by iron as a transition metal have found applications in many industries, including oxidation, C-C bond formation, hydrocarboxylation and dehydration, hydrogenation and reduction reactions of low molecular weight molecules. These processes provided substrates for industrial-scale use, e.g., switchable materials, sustainable and scalable energy storage technologies, drugs for the treatment of cancer, and high molecular weight polymer materials with a predetermined structure through controlled radical polymerization techniques. This review provides a detailed statement of the utilization of homogeneous and heterogeneous iron-based catalysts for the synthesis of both low and high molecular weight molecules with versatile use, focusing on receiving functional materials with high potential for industrial application.

One-Step Catalytic or Photocatalytic Oxidation of Benzene to Phenol: Possible Alternative Routes for Phenol Synthesis?

Phenol is an important chemical compound since it is a precursor of the industrial production of many materials and useful compounds. Nowadays, phenol is industrially produced from benzene by the multi-step “cumene process”, which is energy consuming due to high temperature and high pressure. Moreover, in the “cumene process”, the highly explosive cumene hydroperoxide is produced as an intermediate. To overcome these disadvantages, it would be useful to develop green alternatives for the synthesis of phenol that are more efficient and environmentally benign. In this regard, great interest is devoted to processes in which the one-step oxidation of benzene to phenol is achieved, thanks to the use of suitable catalysts and oxidant species. This review article discusses the direct oxidation of benzene to phenol in the liquid phase using different catalyst formulations, including homogeneous and heterogeneous catalysts and photocatalysts, and focuses on the reaction mechanisms involved in the selective conversion of benzene to phenol in the liquid phase.

Selective Oxidation of Simple Aromatics Catalyzed by Nano-Biomimetic Metal Oxide Catalysts: A Mini Review

The process of selective oxy-functionalization of hydrocarbons using peroxide, O3, H2O2, O2, and transition metals can be carried out by the reactive oxygen species such as hydroxyl/hydroperoxyl radical and/or metal oxygenated species generated in the catalytic reaction. Thus, a variety of mechanisms have been proposed for the selective catalytic oxidation of various hydrocarbons including light alkanes, olefins, and simple aromatics by the biological metalloproteins and their biomimetics either in their homogeneous or heterogeneous platforms. Most studies involving these metalloproteins are Fe or Cu monooxygenases. The pathways carried out by these metalloenzymes in the oxidation of C-H bonds invoke either radical reaction mechanisms including Fenton's chemistry and hydrogen atom transfer followed by radical rebound reaction mechanism or electrophilic oxygenation/O-atom transfer by metal-oxygen species. In this review, we discuss the metal oxide nano-catalysts obtained from metal salts/molecular precursors (M = Cu, Fe, and V) that can easily form in situ through the oxidation of substrates using H2O2(aq) in CH3CN, and be facilely separated from the reaction mixtures as well as recycled for several times with comparable catalytic efficiency for the highly selective conversion from hydrocarbons including aromatics to oxygenates. The mechanistic insights revealed from the oxy-functionalization of simple aromatics mediated by the novel biomimetic metal oxide materials can pave the way toward developing facile, cost-effective, and highly efficient nano-catalysts for the selective partial oxidation of simple aromatics.

Cu(I) complexes obtained via spontaneous reduction of Cu(II) complexes supported by designed bidentate ligands: bioinspired Cu(I) based catalysts for aromatic hydroxylation

Copper(i) complexes [Cu(L1-7)2](ClO4) (1-7) of bidentate ligands (L1-L7) have been synthesized via spontaneous reduction and characterized as catalysts for aromatic C-H activation using H2O2 as the oxidant. The single crystal X-ray structure of 1 exhibited a distorted tetrahedral geometry. All the copper(i) complexes catalyzed direct hydroxylation of benzene to form phenol with good selectivity up to 98%. The determined kinetic isotope effect (KIE) values, 1.69-1.71, support the involvement of a radical type mechanism. The isotope-labeling experiments using H218O2 showed 92% incorporation of 18O into phenol and confirm that H2O2 is the key oxygen supplier. Overall, the catalytic efficiencies of the complexes are strongly influenced by the electronic and steric factor of the ligand, which is fine-tuned by the ligand architecture. The benzene hydroxylation reaction possibly proceeded via a radical mechanism, which was confirmed by the addition of radical scavengers (TEMPO) to the catalytic reaction that showed a reduction in phenol formation.

Bio-inspired Nonheme Iron Oxidation Catalysis: Involvement of Oxoiron(V) Oxidants in Cleaving Strong C-H Bonds

Nonheme iron enzymes generate powerful and versatile oxidants that perform a wide range of oxidation reactions, including the functionalization of inert C-H bonds, which is a major challenge for chemists. The oxidative abilities of these enzymes have inspired bioinorganic chemists to design synthetic models to mimic their ability to perform some of the most difficult oxidation reactions and study the mechanisms of such transformations. Iron-oxygen intermediates like iron(III)-hydroperoxo and high-valent iron-oxo species have been trapped and identified in investigations of these bio-inspired catalytic systems, with the latter proposed to be the active oxidant for most of these systems. In this Review, we highlight the recent spectroscopic and mechanistic advances that have shed light on the various pathways that can be accessed by bio-inspired nonheme iron systems to form the high-valent iron-oxo intermediates.

Single-step benzene hydroxylation by cobalt(ii) catalysts via a cobalt(iii)-hydroperoxo intermediate

Cobalt(ii) complexes reported as efficient and selective catalysts for single-step phenol formation from benzene using H₂O₂. The catalysis proceeds likely via cobalt(iii)-hydroperoxo species.

Iron N-heterocyclic carbene complexes in homogeneous catalysis

This review article summarizes recent development of homogeneous iron N-heterocyclic carbene catalysts.

One step phenol synthesis from benzene catalysed by nickel(ii) complexes

Nickel(ii)complexes of N₄-ligands are reported as efficient catalysts for direct benzene hydroxylation via bis(μ-oxo)dinickel(iii) intermediate species. The exclusive phenol formation is achieved with a yield of 41%.

Heteroleptic cobalt(iii) acetylacetonato complexes with N-heterocyclic carbine-donating scorpionate ligands: synthesis, structural characterization and catalysis

A first structure-determined heteroleptic cobalt(iii) complex with the less hindered tris(carbene)borate works as a catalyst precursor for alkane oxidation.

Immediate hydroxylation of arenes to phenols via V-containing all-silica ZSM-22 zeolite triggered non-radical mechanism

Hydroxylation of arenes via activation of aromatic C_sp2–H bond has attracted great attention for decades but remains a huge challenge. Herein, we achieve the ring hydroxylation of various arenes with stoichiometric hydrogen peroxide (H₂O₂) into the corresponding phenols on a robust heterogeneous catalyst series of V–Si–ZSM-22 (TON type vanadium silicalite zeolites) that is straightforward synthesized from an unusual ionic liquid involved dry-gel-conversion route. For benzene hydroxylation, the phenol yield is 30.8% (selectivity >99%). Ring hydroxylation of mono-/di-alkylbenzenes and halogenated aromatic hydrocarbons cause the yields up to 26.2% and selectivities above 90%. The reaction is completed within 30 s, the fastest occasion so far, resulting in ultra-high turnover frequencies (TOFs). Systematic characterization including ⁵¹V NMR and X-ray absorption fine structure (XAFS) analyses suggest that such high activity associates with the unique non-radical hydroxylation mechanism arising from the in situ created diperoxo V(IV) state.

Hydroxylation of arenes via activation of aromatic C_sp2–H bond remains a challenge. Here, the authors have managed to get various arenes hydroxylated to corresponding phenols using stoichiometric hydrogen peroxide and a series of robust V–Si–ZSM-22 catalysts synthesized via an ionic liquid involved dry-gel-conversion route.

Sc3+ (or HClO4) Activation of a Nonheme FeIII-OOH Intermediate for the Rapid Hydroxylation of Cyclohexane and Benzene

[Fe(β-BPMCN)(CH₃CN)₂]²⁺ (1, BPMCN = N,N' -bis(pyridyl-2-methyl)- N,N' -dimethyl- trans-1,2-diaminocyclo-hexane) is a relatively poor catalyst for cyclohexane oxidation by H₂O₂ and cannot perform benzene hydroxylation. However, addition of Sc³⁺ activates the 1/H₂O₂ reaction mixture to be able to hydroxylate cyclohexane and benzene within seconds at -40 °C. A metastable S = 1/2 Fe^III-(η¹-OOH) intermediate 2 is trapped at -40 °C, which undergoes rapid decay upon addition of Sc³⁺ at rates independent of [substrate] but linearly dependent on [Sc³⁺]. HClO₄ elicits comparable reactivity as Sc³⁺ at the same concentration. We thus postulate that these additives both facilitate O-O bond heterolysis of 2 to form a common highly electrophilic Fe^V═O oxidant that is comparably reactive to the fastest nonheme high-valent iron-oxo oxidants found to date.

Synthesis, characterization and derivatization of hydroxyl-functionalized iron(ii) bis(NHC) complexes

The syntheses of a novel hydroxyl-functionalized tetradentate NHC/pyridine hybrid ligand and the corresponding Ag(i) and Fe(ii) complexes are presented. Spectroscopic and X-ray diffraction techniques are used for structural investigations and cyclic voltammetry measurements reveal interesting electronic properties. Transmetalation of the trinuclear Ag(i) complex (C1) yields a mononuclear and a dinuclear iron(ii) bis(NHC) complex (C2 and C3), which can be separated by stepwise precipitation. The former is isostructural to iron(ii) bis(NHC) complex A, which is a versatile oxidation catalyst. Furthermore, suitable conditions for esterification reactions of the ligand precursor and iron(ii) bis(NHC) complex (C2) have been established, demonstrating the utility of the hydroxyl functionality for immobilization and derivatization purposes.

Specific Enhancement of Catalytic Activity by a Dicopper Core: Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide

A dicopper(II) complex, stabilized by the bis(tpa) ligand 1,2-bis[2-[bis(2-pyridylmethyl)aminomethyl]-6-pyridyl]ethane (6-hpa), [Cu₂ (μ-OH)(6-hpa)]³⁺ , was synthesized and structurally characterized. This complex catalyzed selective hydroxylation of benzene to phenol using H₂ O₂ , thus attaining large turnover numbers (TONs) and high H₂ O₂ efficiency. The TON after 40 hours for the phenol production exceeded 12000 in MeCN at 50 °C under N₂ , the highest value reported for benzene hydroxylation with H₂ O₂ catalyzed by homogeneous complexes. At 22 % benzene conversion, phenol (95.2 %) and p-benzoquinone (4.8 %) were produced. The mechanism of H₂ O₂ activation and benzene hydroxylation is proposed.

Catalytic oxidation of aromatic hydrocarbons by a molecular iron–NHC complex

An iron–NHC complex bearing a tetradentate bis(N-heterocyclic carbene) ligand is applied as catalyst for the oxidation of methyl substituted arene substrates.

Direct hydroxylation of benzene and aromatics with H2O2 catalyzed by a self-assembled iron complex: evidence for a metal-based mechanism

An imine-based catalyst easily obtained by self-assembly of cheap and commercially available starting materials selectively catalyzes the hydroxylation of aromatic compounds.

Chelating bis-N-heterocyclic carbene complexes of iron(ii) containing bipyridyl ligands as catalyst precursors for oxidation of alcohols

Chelating bis-N-heterocyclic carbene (bis-NHC) complexes of iron(ii) containing pyridyl ligands have been prepared by the reaction of [FeCl2L] [L = bipy (1), phen (2)] with [LiN(SiMe3)2] and a bis(imidazolium) salt. The [Fe(bis-NHC)L(I)2] complexes were active pre-catalysts in the oxidation of 1-phenylethanol with tert-butyl hydroperoxide in neat conditions, affording a quantitative yield of acetophenone in 4.5 h. The catalyst could be reused up to six cycles giving a turnover number (TON) of 1500. Various secondary alcohols, both aromatic and aliphatic were selectivity oxidised to the corresponding ketones in excellent yields. Compound 1 is stable in acetonitrile solution for ca. 4 h, although after 16 h, it evolves to a mixture of [Fe(bis-NHC)(bipy)2]I2 (3), [Fe(bipy)3](2+) and bis-imidazolium salt. The molecular structure of 3 has been determined by X-ray diffraction studies.

Selective direct hydroxylation of benzene to phenol with hydrogen peroxide by iron and vanadyl based homogeneous and heterogeneous catalysts

With our homogeneous and heterogeneous catalysts, very high selectivity to phenol was achieved, with yields comparable to or higher than the ones reported in the literature, under mild conditions.

Binding of molecular oxygen by an artificial heme analogue: investigation on the formation of an Fe–tetracarbene superoxo complex

The reactivity of a heme-like organometallic Fe–NHC complex with O₂ is studied. The formation of a superoxo Fe(iii) intermediate is observed. The reactivity of the intermediate in acetone and acetonitrile is described and the products are identified.