A divalent heteroleptic lanthanoid fluoride complex stabilised by the tetraphenylcyclopentadienyl ligand, arising from C–F activation of pentafluorobenzene

Divalent ansa-Octaphenyllanthanocenes: Synthesis, Structures, and EuII Luminescence

Reductive dimerization of fulvenes using low-valent metal precursors is a straightforward one-step approach to access ethylene-bridged metallocenes. This process has so far mainly been employed with fulvenes carrying one or two substituents in the exocyclic position. In this work, a new synthesis of the unsubstituted exocyclic 1,2,3,4-tetraphenylfulvene (1), its full structural characterization by NMR spectroscopy and single-crystal X-ray diffraction, as well as some photophysical properties and its first use in reductive dimerization are described. This fulvene reacted with different lanthanoid metals in thf to provide the divalent ansa-octaphenylmetallocenes [Ln(C5Ph4CH2)2(thf)n] (Ln = Sm, n = 2 (2); Ln = Eu, n = 2 (3); and Ln = Yb, n = 1 (4)). These complexes were characterized by X-ray diffraction, laser desorption/ionization time of flight mass spectrometry, and, in the case of Sm and Yb, multinuclear NMR spectroscopy, showing the influence of the ansa-bridge on solution and solid-state structures compared to previously reported unbridged metallocenes. Furthermore, the luminescence properties of the Eu ansa complex 3 were studied in solution and the solid state, revealing significant differences with the known octa- and deca-phenyleuropocenes, [Eu(C5Ph4H)2(dme)] and [Eu(C5Ph5)2].

Synthesis and Characterisation of Novel Bis(diphenylphosphane oxide)methanidoytterbium(III) Complexes

Reaction of [YbCp₂(dme)] (Cp = cyclopentadienyl, dme = 1,2 dimethoxyethane) with bis(diphenylphosphano)methane dioxide (H₂dppmO₂) leads to deprotonation of the ligand H₂dppmO₂ and oxidation of ytterbium, forming an extremely air-sensitive product, [Yb^III(HdppmO₂)₃] (1), a six-coordinate complex with three chelating (OPCHPO) HdppmO₂ ligands. Complex 1 was also obtained by a redox transmetallation/protolysis synthesis from metallic ytterbium, Hg(C₆F₅)_2, and H₂dppmO₂. In a further preparation, the reaction of [Yb(C₆F₅)₂] with H₂dppmO₂, not only yielded compound 1, but also gave a remarkable tetranuclear cage, [Yb₄(µ-HdppmO₂)₆(µ-F)₆] (2) containing two [Yb(µ-F)]₂ rhombic units linked by two fluoride ligands and the tetranuclear unit is encapsulated by six bridging HdppmO₂ donors. The fluoride ligands of the cage result from C-F activation of pentafluorobenzene and concomitant formation of p-H₂C₆F₄ and m-H₂C₆F₄, the last being an unexpected product.

Selective carbon-phosphorus bond cleavage: expanding the toolbox for accessing bulky divalent lanthanoid sandwich complexes

The synthesis of two new tetra- and penta-phenycyclopentadienyldiphenylphosphine pro-ligands which readily undergo selective C-P bond cleavage has allowed for the facile synthesis of bulky divalent octa- and deca-phenylmetallocenes of europium, ytterbium and samarium.

Rare Earth Starting Materials and Methodologies for Synthetic Chemistry

The number of rare earth (RE) starting materials used in synthesis is staggering, ranging from simple binary metal-halide salts to borohydrides and "designer reagents" such as alkyl and organoaluminate complexes. This review collates the most important starting materials used in RE synthetic chemistry, including essential information on their preparations and uses in modern synthetic methodologies. The review is divided by starting material category and supporting ligands (i.e., metals as synthetic precursors, halides, borohydrides, nitrogen donors, oxygen donors, triflates, and organometallic reagents), and in each section relevant synthetic methodologies and applications are discussed.

Europium is Different: Solvent and Ligand Effects on Oxidation State Outcomes and C-F Activation in Reactions Between Europium Metal and Pentafluorophenylsilver

Unique outcomes have emerged from the redox transmetallation/ protolysis (RTP) reactions of europium metal with [Ag(C₆ F₅ )(py)] (py=pyridine) and pyrazoles (RR'pzH). In pyridine, a solvent not normally used for RTP reactions, the products were mainly Eu^II complexes, [Eu(RR'pz)₂ (py)₄ ] (RR'pz=3,5-diphenylpyrazolate (Ph₂ pz) 1; 3-(2-thienyl)-5-trifluoromethylpyrazolate (ttfpz) 2; 3-methyl-5-phenylpyrazolate (PhMepz) 3). However, use of 3,5-di-tert-butylpyrazole (tBu₂ pzH) gave trivalent [Eu(tBu₂ pz)₃ (py)₂ ] 4, whereas the bulkier N,N'-bis(2,6-difluorophenyl)formamidine (DFFormH) gave divalent [Eu(DFForm)₂ (py)₃ ] 5. In tetrahydrofuran (thf), the usual solvent for RTP reactions, C-F activation was observed for the first time with [Ag(C₆ F₅ )(py)] in such reactions. Thus trivalent [{Eu₂ (Ph₂ pz)₄ (py)₄ (thf)₂ (μ-F)₂ }{Eu₂ (Ph₂ pz)₄ (py)₂ (thf)₄ (μ-F)₂ }] (6), [Eu₂ (ttfpz)₄ (py)₂ (dme)₂ (μ-F)₂ ] (7), [Eu₂ (tBu₂ pz)₄ (dme)₂ (μ-F)₂ ] (8) were obtained from the appropriate pyrazoles, the last two after crystallization from 1,2-dimethoxyethane (dme). Surprisingly 3,5-dimethylpyrazole (Me₂ pzH) gave the divalent cage [Eu₆ (Me₂ pz)₁₀ (thf)₆ (μ-F)₂ ] (9). This has a compact ovoid core held together by bridging fluoride, thf, and pyrazolate ligands, the last including the rare μ₄ -1η⁵ (N₂ C₃ ): 2η² (N,N'): 3κ(N): 4κ(N') pyrazolate binding mode. With the bulky N,N'-bis(2,6-diisopropylphenyl)formamidine (DippFormH), which often favours C-F activation in RTP reactions, neither oxidation to Eu^III nor C-F activation was observed and [Eu(DippForm)₂ (thf)₂ ] (10) was isolated. By contrast, Eu reacted with Bi(C₆ F₅ )₃ and Ph₂ pzH or tBu₂ pzH in thf without C-F activation, to give [Eu(Ph₂ pz)₂ (thf)₄ ] (11) and [Eu(tBu₂ pz)₃ (thf)₂ ] (12) respectively, the oxidation state outcomes corresponding to that for use of [Ag(C₆ F₅ )(py)] in pyridine.

Half-sandwich scandium dibenzyl complexes bearing penta- or tetra-arylcyclopentadienyl ligands: synthesis, structure and syndiospecific styrene polymerization activity

A series of half-sandwich scandium dibenzyl complexes has been synthesized via a reaction of KCp^(Ar*)5 or KCp^Ar5 (Ar* = 3,5-^tBu₂–C₆H₃; Ar = 3,5-ⁱPr₂–C₆H₃) or KCp^(Ar*)4H, KCp^Ar4H and KCp^Ph4H with the cationic scandium complex [Sc(p-CH₂C₆H₄-Me)₂(THF)_x][BPh₄].

Application of Elemental Lanthanides in the Selective C-F Activation of Trifluoromethylated Benzofulvenes Providing Access to Various Difluoroalkenes

The selective activation of one carbon-fluorine bond in polyfluorinated aromatic molecules or in trifluoromethyl-containing substrates offers the possibility of accessing unique fluorine-containing molecules, which are difficult to obtain by other synthetic pathways. Among various metals, which can undergo C-F activation, lanthanides (Ln) are good candidates as they form strong Ln-F bonds. Lanthanide metals are strong reducing agents with a redox potential Ln³⁺/Ln of approximately -2.3 V, which is comparable to the value of the Mg²⁺/Mg redox couple. In addition, lanthanide metals display a promising functional group tolerance and their reactivity can vary along the lanthanide series, making them suitable reagents for fine-tuning reaction conditions in organic and organometallic transformations. However, due to their oxophilicity, lanthanides react readily with oxygen and water and therefore require special conditions for storage, handling, preparation, and activation. These factors have limited a more widespread use in organic synthesis. We herein present how dysprosium metal - and by analogy all lanthanide metals - can be freshly prepared under anhydrous conditions using glovebox and Schlenk techniques. The freshly filed metal, in combination with aluminum chloride, initiates the selective C-F activation in trifluoromethylated benzofulvenes. The resulting reaction intermediates react with nitroalkenes to obtain a new family of difluoroalkenes.

Exploring the effect of the LnIII/LnIIredox potential on C–F activation and on oxidation of some lanthanoid organoamides

The role of the Ln^IIoxidation state (Ln = Eu, Yb, Sm) in C–F activation reactions has been explored.