Efficient separation of americium by a mixed solvent of two extractants, a diamideamine and a nitrilotriacetamide

The Japan Atomic Energy Agency (JAEA) has proposed the Solvent Extraction from Liquid waste using Extractants of CHON-type for Transmutation (SELECT) process by solvent extraction as a new separation technology to recover minor actinides (MA) from high-level liquid waste (HLLW) produced by spent fuel reprocessing. The MA separation in the SELECT process comprises the recovery of MA and rare earths (RE) from HLLW, MA/RE separation, and Am/Cm separation. Three highly practical extractants are used in the MA separation. Furthermore, this flow configuration facilitates the preparation of nitric acid concentrations in the aqueous phase. However, the separation factor between Cm and Nd in the MA/RE separation is small (SF_Cm/Nd = 2.5), requiring many extraction stages for continuous extraction in a mixer settler. Therefore, this study investigated the separation of only Am from an aqueous nitric acid solution containing MA (Am and Cm) and RE using an organic phase mixed with two extractants alkyl diamideamine with 2-ethylhexyl alkyl chains (ADAAM(EH)) and hexa-n-octylnitrilotriacetamide (HONTA) used in the SELECT process. Under high-concentration nitric acid conditions, Am and La, Ce, Pr, Nd (light lanthanides) were extracted in the ADAAM(EH) + HONTA mixed solvent, whereas Cm, medium, and heavy lanthanides, and Y were partitioned in the aqueous phase. Subsequently, only light lanthanides could be back extracted from the ADAAM(EH) + HONTA mixture solvent containing Am and light lanthanides in low nitric acid concentrations. Furthermore, Am could be easily stripped with 0.2 M or 5 M nitric acid. This method does not require the mutual separation of Cm and Nd, which have low separation factors. Am can be efficiently separated by one extraction and two back extractions, reducing the number of steps in the SELECT process.

Theoretical Insights into Phenanthroline-Based Ligands toward the Separation of Am(III)/Eu(III)

The bistriazinyl-phenanthroline representative ligand, BTPhen, shows excellent extraction and separation ability for trivalent actinides and lanthanides. Herein, we first designed three phenanthroline-based nitrogen-donor ligands (L¹, L², and L³), and then studied the structural and bonding properties as well as thermodynamic properties of the probable complexes, ML(NO₃)₃ (M = Am or Eu and L = L¹, L², or L³), using scalar relativistic density functional theory. Our charge decomposition analysis revealed an obviously higher charge transfer from the ligand to Am(III) compared with the Eu(III) case for the studied complexes. Spin density analysis further showed a more significant degree of Am-to-ligand spin delocalization and the corresponding spin polarization on the ligands. According to the thermodynamic analysis, ligand L³ has the strongest complexation capacity for both Am(III) and Eu(III) ions, while ligand L¹ has the highest Am(III)/Eu(III) selectivity in binary octanol/water solutions. We expected that this work can provide valuable theoretical support for the design of effective ligands for actinide(III)/lanthanide(III) separation in high level liquid waste.

Zirconium bistriazolylpyridine phosphonate materials for efficient, selective An(iii)/Ln(iii) separations

Direct synthesis of ZrCl₄ and bistriazolylpyridine phosphonate has produced novel sorbent materials that, for the first time, demonstrate selective extraction of Am(iii) in the presence of excess Eu(iii). Further, the high ligand content of these materials affords them high extraction efficiencies.

The linear relationship derived from the deposition potential of Pb–Ln alloy and atomic radius

Lanthanides possess extremely similar properties because their radius only changes slightly due to lanthanide contraction.

Extraction of minor actinides, lanthanides and other fission products by silica-immobilized BTBP/BTPhen ligands

Novel BTBP [bis-(1,2,4-triazin-3-yl)-2,2′-bipyridine]/BTPhen [bis-(1,2,4-triazin-3-yl)-1,10-phenanthroline] functionalized silica gels have been developed to extract minor actinides, lanthanides and other fission products.

Separation of actinides from spent nuclear fuel: A review

This review summarises the methods currently available to extract radioactive actinide elements from solutions of spent nuclear fuel. This separation of actinides reduces the hazards associated with spent nuclear fuel, such as its radiotoxicity, volume and the amount of time required for its' radioactivity to return to naturally occurring levels. Separation of actinides from environmental water systems is also briefly discussed. The actinide elements typically found in spent nuclear fuel include uranium, plutonium and the minor actinides (americium, neptunium and curium). Separation methods for uranium and plutonium are reasonably well established. On the other hand separation of the minor actinides from lanthanide fission products also present in spent nuclear fuel is an ongoing challenge and an area of active research. Several separation methods for selective removal of these actinides from spent nuclear fuel will be described. These separation methods include solvent extraction, which is the most commonly used method for radiochemical separations, as well as the less developed but promising use of adsorption and ion-exchange materials.

Ammonium molybdate phosphate functionalized silicon dioxide impregnated in calcium alginate for highly efficient removal of 137Cs from aquatic bodies

Development of new hybrid material (SiO₂-AMP–Ca-Alg beads) for cesium uptake without disturbing the water quality parameters.

Electrochemical oxidation of ²⁴³Am(III) in nitric acid by a terpyridyl-derivatized electrode

Selective oxidation of trivalent americium (Am) could facilitate its separation from lanthanides in nuclear waste streams. Here, we report the application of a high-surface-area, tin-doped indium oxide electrode surface-derivatized with a terpyridine ligand to the oxidation of Am(III) to Am(V) and Am(VI) in nitric acid. Potentials as low as 1.8 volts (V) versus the saturated calomel electrode were applied, 0.7 V lower than the 2.6 V potential for one-electron oxidation of Am(III) to Am(IV) in 1 molar acid. This simple electrochemical procedure provides a method to access the higher oxidation states of Am in noncomplexing media for the study of the associated coordination chemistry and, more important, for more efficient separation protocols.

Regioselective Synthesis of V-Shaped Bistriazinyl-phenanthrolines

A new, regioselective synthesis of V-shaped 2,9-bis(6-(4-halophenyl)-1,2,4-triazin-3-yl)-1,10-phenanthrolines (4XPhBTPhen) ligands was developed, creating access to a simple and reliable synthesis of precursors for future supramolecular actinide complexing systems. Described is a reactant-directed regioselective synthetic method, which was found to be high yielding and reliable and yields exclusively 6,6'-phenyl BTPhen derivatives (including 4-chloro and 4-bromo) in five simple steps. Molecular and crystal structures of PhBTP and PhBTPhen products are fully determined and both were found to be in space group C2/c. Additionally, molecular and crystal structures of Z and E isomers of 2-hydrazono-2-phenylacetaldehyde oxime, a reagent in the synthetic route, reveal existence of strong intramolecular N-H···O hydrogen bonding in the Z isomer explaining its lower solubility in water.

Efficient masking of corrosion and fission products such as Ni(II) and Pd(II) in the presence of the minor actinide Am(III) using hydrophilic anionic or cationic bis-triazines

Water soluble anionic and cationic bis-triazine ligands are able to suppress (mask) the extraction of corrosion and fission products such as Ni(II) and Pd(II) that are found in PUREX raffinates. Thus it is possible to separate these elements from the minor actinide Am(III). Although some masking agents have previously been developed that retard the extraction of Pd(II), this is the first time a masking agent has been developed for Ni(II).

Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

Tetrasulfonated bis-1,2,4-triazine ligands can selectively complex and separate actinides from lanthanides in aqueous nitric acid with very high selectivities.

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.

Effective Am(iii)/Eu(iii) separations using 2,6-bis(1,2,4-triazin-3-yl)pyridine (BTP) functionalised titania particles and hierarchically porous beads

Titania particles and beads functionalised with a modified BTP ligand have been used to selectively extract Am(iii) over Eu(iii) from 0.01 M nitric acid solutions.

Effective separation of the actinides Am(iii) and Cm(iii) by electronic modulation of bis-(1,2,4-triazin-3-yl)phenanthrolines

It has been shown that modification of the phenanthroline backbone of CyMe₄-BTPhen leads to subtle electronic modulation, permitting differential ligation of Am(iii) and Cm(iii) resulting in separation factors up to 7.