Highly sensitive surface-enhanced Raman scattering based on multi-dimensional plasmonic coupling in Au-graphene-Ag hybrids

A dual-signaling surface-enhanced Raman spectroscopy ratiometric strategy for ultrasensitive Hg2+ detection based on Au@Ag/COF composites

Heavy metal ion pollution poses significant risks to human health and ecological systems, and its monitoring is important. A sensitive and accurate surface-enhanced Raman spectroscopy (SERS) detection assay for Hg2+ was developed using Au@Ag/COF substrates and Y-shaped DNA labeled with two Raman reporters. The Au@Ag NPs in the COF produced robust and uniform E-fields, improving their detection reproducibility. The Y-shaped DNA design increased sensitivity with a low detection limit of 5.0 × 10-16 M by bringing the Raman reporter closer to the substrate surface. Additionally, the use of two Raman reporters allowed for a ratiometric method, improving detection accuracy by detecting both "signal-off" and "signal-on" signals. This selective sensor exhibited excellent recovery in river water, tap water, and milk samples, showcasing its robust biosensing capability for the detection of Hg2+ and its potential for sensing other heavy-metal ions in food and environmental applications.

Effect of synthesis time on plasmonic properties of Ag dendritic nanoforests

The effects of synthesis time on the plasmonic properties of Ag dendritic nanoforests on Si substrate (Ag-DNF/Si) samples synthesized through the fluoride-assisted galvanic replacement reaction were investigated. The Ag-DNF/Si samples were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, reflection spectroscopy, X-ray diffraction and surface-enhanced Raman spectroscopy (SERS). The prolonged reaction time led to the growth of an Ag-DNF layer and etched Si hole array. SEM images and variations in the fractal dimension index indicated that complex-structure, feather-like leaves became coral-like branches between 30 and 60 min of synthesis. The morphological variation during the growth of the Ag DNFs resulted in different optical responses to light illumination, especially those of light harvest and energy transformation. The sample achieved the most desirable light-to-heat conversion efficiency and SERS response with a 30 min growth time. A longer synthesis time or thicker Ag-DNF layer on the Si substrate did not have superior plasmonic properties.

Infrared Polaritonic Biosensors Based on Two-Dimensional Materials

In recent years, polaritons in two-dimensional (2D) materials have gained intensive research interests and significant progress due to their extraordinary properties of light-confinement, tunable carrier concentrations by gating and low loss absorption that leads to long polariton lifetimes. With additional advantages of biocompatibility, label-free, chemical identification of biomolecules through their vibrational fingerprints, graphene and related 2D materials can be adapted as excellent platforms for future polaritonic biosensor applications. Extreme spatial light confinement in 2D materials based polaritons supports atto-molar concentration or single molecule detection. In this article, we will review the state-of-the-art infrared polaritonic-based biosensors. We first discuss the concept of polaritons, then the biosensing properties of polaritons on various 2D materials, then lastly the impending applications and future opportunities of infrared polaritonic biosensors for medical and healthcare applications.

Au@Ag Dendritic Nanoforests for Surface-Enhanced Raman Scattering Sensing

The effects of Au cores in Ag shells in enhancing surface-enhanced Raman scattering (SERS) were evaluated with samples of various Au/Ag ratios. High-density Ag shell/Au core dendritic nanoforests (Au@Ag-DNFs) on silicon (Au@Ag-DNFs/Si) were synthesized using the fluoride-assisted Galvanic replacement reaction method. The synthesized Au@Ag-DNFs/Si samples were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, reflection spectroscopy, X-ray diffraction, and Raman spectroscopy. The ultraviolet-visible extinction spectrum exhibited increased extinction induced by the addition of Ag when creating the metal DNFs layer. The pure Ag DNFs exhibited high optical extinction of visible light, but low SERS response compared with Au@Ag DNFs. The Au core (with high refractive index real part) in Au@Ag DNFs maintained a long-leaf structure that focused the illumination light, resulting in the apparent SERS enhancement of the Ag coverage.

Raman and Fluorescence Enhancement Approaches in Graphene-Based Platforms for Optical Sensing and Imaging

The search for novel platforms and metamaterials for the enhancement of optical and particularly Raman signals is still an objective since optical techniques offer affordable, noninvasive methods with high spatial resolution and penetration depth adequate to detect and image a large variety of systems, from 2D materials to molecules in complex media and tissues. Definitely, plasmonic materials produce the most efficient enhancement through the surface-enhanced Raman scattering (SERS) process, allowing single-molecule detection, and are the most studied ones. Here we focus on less explored aspects of SERS such as the role of the inter-nanoparticle (NP) distance and the ultra-small NP size limit (down to a few nm) and on novel approaches involving graphene and graphene-related materials. The issues on reproducibility and homogeneity for the quantification of the probe molecules will also be discussed. Other light enhancement mechanisms, in particular resonant and interference Raman scatterings, as well as the platforms that allow combining several of them, are presented in this review with a special focus on the possibilities that graphene offers for the design and fabrication of novel architectures. Recent fluorescence enhancement platforms and strategies, so important for bio-detection and imaging, are reviewed as well as the relevance of graphene oxide and graphene/carbon nanodots in the field.

Graphene oxide-highly anisotropic noble metal hybrid systems for intensified surface enhanced Raman scattering and direct capture and sensitive discrimination in PCBs monitoring

Graphene oxide (GO)-anisotropic noble metal hybrid systems were developed as highly sensitive and reproducible surface enhanced Raman scattering (SERS) platform, in which ultrathin GO was embedded between two metallic layers of flower-like Ag nanoparticles (AgNFs) and gold nanostars (AuNSts). Due to multi-dimensional plasmonic coupling effect, the well-designed AgNFs-GO-AuNSts sandwich structures possessed ultrahigh sensitivity with the detection limit of R6G as low as 1.0 × 10^-13 M and high enhancement factor of 2.59 × 10⁷. Additionally, the GO interlayer could function as protective shell to suppress the oxidation of bottom silver layer and efficiently position the target analytes within hot spots. These features endow the substrate with high stability and excellent reproducibility (Signal variations < 7%). Particularly, the GO sandwiched substrate can be explored for the direct capture and sensitive detection of polychlorinated biphenyls (PCBs) without any organic modifier as molecule harvester. This minimum detected concentration was estimated as low as 3.4 × 10^-6 M. The detection method based on GO mediated sandwich substrate avoids complicated surface modification manipulations and improves the substrate cleanness. Moreover, the resultant sandwich substrates can be used to recognize fingerprint peaks of different PCBs in their complex mixture, revealing great potential applications in SERS-based simultaneous detection of multiple pollutants with low affinity.

Hybrid metal-graphene plasmonic sensor for multi-spectral sensing in both near- and mid-infrared ranges

This paper proposes a hybrid metal-graphene plasmonic sensor which can simultaneously perform multi-spectral sensing in near- and mid-IR ranges. The proposed sensor consists of an array of asymmetric gold nano-antennas integrated with an unpatterned graphene sheet. The gold antennas support sharp Fano-resonances for near-IR sensing while the excitation of graphene plasmonic resonances extend the sensing spectra to the mid-IR range. Such a broadband spectral range goes far beyond previously demonstrated multi-spectral plasmonic sensors. The sensitivity and figure of merit (FOM) as well as their dependence on the thickness of the sensing layer and Fermi energy of graphene are studied systematically. This new type of sensor combines the advantages of conventional metallic plasmonic sensors and graphene plasmonic sensors and may open a new door for high-performance, multi-functional plasmonic sensing.

High-Performance SERS Substrate Based on Hierarchical 3D Cu Nanocrystals with Efficient Morphology Control

Cu nanocrystals of various shapes are synthesized via a universal, eco-friendly, and facile colloidal method on Al substrates using hexadecylamine (HDA) as a capping agent and glucose as a reductant. By tuning the concentration of the capping agent, hierarchical 3D Cu nanocrystals show pronounced surface-enhanced Raman scattering (SERS) through the concentrated hot spots at the sharp tips and gaps due to the unique 3D structure and the resulting plasmonic couplings. Intriguingly, 3D sword-shaped Cu crystals have the highest enhancement factor (EF) because of their relatively uniform size distribution and alignment. This work opens new pathways for efficiently realizing morphology control for Cu nanocrystals as highly efficient SERS platforms.

Electromagnetic Field Redistribution in Metal Nanoparticle on Graphene

Benefiting from the induced image charge on metal film, the light energy is confined on a film surface under metal nanoparticle dimer, which is called electromagnetic field redistribution. In this work, electromagnetic field distribution of metal nanoparticle monomer or dimer on graphene is investigated through finite-difference time-domain method. The results point out that the electromagnetic field (EM) redistribution occurs in this nanoparticle/graphene hybrid system at infrared region where light energy could also be confined on a monolayer graphene surface. Surface charge distribution was analyzed using finite element analysis, and surface-enhanced Raman spectrum (SERS) was utilized to verify this phenomenon. Furthermore, the data about dielectric nanoparticle on monolayer graphene demonstrate this EM redistribution is attributed to strong coupling between light-excited surface charge on monolayer graphene and graphene plasmon-induced image charge on dielectric nanoparticle surface. Our work extends the knowledge of monolayer graphene plasmon, which has a wide range of applications in monolayer graphene-related film.

The effect of graphene on surface plasmon resonance of metal nanoparticles

Two transparent graphene–metal nanoparticle (NP) hybrid schemes, namely Au NPs covered by graphene layers and Au NPs encapsulated by graphene layers, are presented and the effect of graphene on the localized surface plasmon resonance of metal NPs is systematically investigated.

Recent progress on graphene-based substrates for surface-enhanced Raman scattering applications

Graphene-based SERS substrates are classified and introduced, and their applications in biosensing-related fields are reviewed.

Graphene plasmonics for surface enhancement near-infrared absorptivity

Monolayer graphene has poor absorption in the near-infrared region. Its layer is only as thick as a single atom so it cannot have a high absorptivity. In this paper, in order to form a hybrid system, the absorption characteristics of monolayer graphene covering a metal/dielectric/metal substrate has been theoretically analyzed. The magnetic polaritons in the metal/dielectric couple with the plasmonic resonance in the graphene to dramatically enhance the graphene absorptivity. This study analyzes the factors that enhance the absorptivity, including the geometric parameters and the relative positions of the graphene. The local electromagnetic field and the power dissipation density are illustrated to explain the underlying mechanisms further. These numerical results can provide potential application in the field of optical detection and optoelectronic devices.

Graphene-Ag Hybrids on Laser-Textured Si Surface for SERS Detection

Surface-enhanced Raman scattering (SERS) has been extensively investigated as an effective approach for trace species detection. Silver nanostructures are high-sensitivity SERS substrates in common use, but their poor chemical stability impedes practical applications. Herein, a stable and sensitive SERS substrate based on the hybrid structures of graphene/silver film/laser-textured Si (G/Ag/LTSi) was developed, and a simple, rapid, and low-cost fabrication approach was explored. Abundant nanoparticles were directly created and deposited on the Si surface via laser ablation. These aggregated nanoparticles functioned as hotspots after a 30 nm Ag film coating. A monolayer graphene was transferred to the Ag film surface to prevent the Ag from oxidation. The SERS behavior was investigated by detecting R6G and 4-MBT molecules. The experimental results indicate that the maximum enhancement factor achieved by the G/Ag/LTSi substrate is over 10⁷ and less than 23% SERS signals lost when the substrate was exposed to ambient conditions for 50 days. The covering graphene layer played crucial roles in both the Raman signals enhancement and the Ag nanostructure protection. The stable and sensitive SERS performance of G/Ag/LTSi substrate evince that the present strategy is a useful and convenient route to fabricate large-area graphene-silver plasmonic hybrids for SERS applications.

Toward highly sensitive surface-enhanced Raman scattering: the design of a 3D hybrid system with monolayer graphene sandwiched between silver nanohole arrays and gold nanoparticles

We report a novel graphene-metal hybrid system by introducing monolayer graphene between gold nanoparticles (Au NPs) and silver nanohole (Ag NH) arrays. The design incorporates three key advantages to promote the surface-enhanced Raman scattering (SERS) sensing capacity: (i) making full use of the single-atomic feature of graphene for generating uniform sub-nanometer spaces; (ii) maintaining the bottom layer of Ag nanoarrays with an ordered manner for facilitating the transfer of graphene films and assembly of the top layer of Au NPs; (iii) integrating the advantages of the strong plasmonic effect of Ag, the chemical stability of Au, as well as the mechanical flexibility and biological compatibility of graphene. In this configuration, the plasmonic properties can be fine-tuned by separately optimizing the horizontal or vertical gaps between the metal NPs. Exactly, sub-20 nm spaces between the horizontally patterned Ag tips constructed by adjacent Ag NHs, and sub-nanometer scale graphene gaps between the vertically distributed Au NP-Ag NH have been achieved. Finite element numerical simulations demonstrate that the multi-dimensional plasmonic couplings (including the Au NP-Au NP, Au NP-Ag NH and Ag NH-Ag NH couplings) promote for the hybrid platform an electric field enhancement up to 137 times. Impressively, the as-prepared 3D Au NP-graphene-Ag NH array hybrid structure manifests ultrahigh SERS sensitivity with a detection limit of 10^-13 M for R6G molecules, as well as good reproducibility and stability. This work represents a step towards high-performance SERS substrate fabrication, and opens up a new route for graphene-plasmonic hybrids in SERS applications.

AuNPs/COFs as a new type of SERS substrate for sensitive recognition of polyaromatic hydrocarbons

A new SERS substrate was prepared via 1 min self-assembly of Au NPs to COFs for the sensitive recognition of PAHs.

Carboxyl-functionalized graphene oxide composites as SPR biosensors with enhanced sensitivity for immunoaffinity detection

This work demonstrates the excellent potential of carboxyl-functionalized graphene oxide (GO-COOH) composites to form biocompatible surfaces on sensing films for use in surface plasmon resonance (SPR)-based immunoaffinity biosensors. Carboxyl-functionalization of graphene carbon can modulate its visible spectrum, and can therefore be used to improve and control the plasmonic coupling mechanism. The binding properties of the molecules between a sensing film and a protein were elucidated at various flow rates of those molecules. The bio-specific binding interaction among the molecules was investigated by performing an antigen and antibody affinity immunoassay. The results thus obtained revealed that the overall affinity binding value, K_A, of the Au/GO-COOH chip can be significantly enhanced by up to ∼5.15 times that of the Au/GO chip. With respect to the shifts of the SPR angles of the chips, the affinity immunoassay interaction at a BSA concentration of 1μg/ml for an Au/GO-COOH chip, an Au/GO chip and a traditional SPR chip are 35.5m°, 9.128m° and 8.816m°, respectively. The enhancement of the antigen-antibody interaction of the Au/GO-COOH chip cause this chip to become four times as sensitive to the SPR angle shift and to have the lowest antibody detection limit of 0.01pg/ml. These results indicate the potential of the chip in detecting specific proteins, and the development of real-time in vivo blood analysis and diagnosis based on cancer tumor markers.

Gold@silver bimetal nanoparticles/pyramidal silicon 3D substrate with high reproducibility for high-performance SERS

A novel and efficient surface enhanced Raman scattering (SERS) substrate has been presented based on Gold@silver/pyramidal silicon 3D substrate (Au@Ag/3D-Si). By combining the SERS activity of Ag, the chemical stability of Au and the large field enhancement of 3D-Si, the Au@Ag/3D-Si substrate possesses perfect sensitivity, homogeneity, reproducibility and chemical stability. Using R6G as probe molecule, the SERS results imply that the Au@Ag/3D-Si substrate is superior to the 3D-Si, Ag/3D-Si and Au/3D-Si substrate. We also confirmed these excellent behaviors in theory via a commercial COMSOL software. The corresponding experimental and theoretical results indicate that our proposed Au@Ag/3D-Si substrate is expected to develop new opportunities for label-free SERS detections in biological sensors, biomedical diagnostics and food safety.

An optical fiber SERS sensor based on GO/AgNPs/rGO sandwich structure hybrid films

In this work, we present a novel optical fiber SERS (OF-SERS) sensor based on a sandwich structure of GO/AgNPs/rGO.

Surface-enhanced Raman scattering from AgNP-graphene-AgNP sandwiched nanostructures

We developed a facile approach toward hybrid AgNP-graphene-AgNP sandwiched structures using self-organized monolayered AgNPs from wet chemical synthesis for the optimized enhancement of the Raman response of monolayer graphene. We demonstrate that the Raman scattering of graphene can be enhanced 530 fold in the hybrid structure. The Raman enhancement is sensitively dependent on the hybrid structure, incident angle, and excitation wavelength. A systematic simulation is performed, which well explains the enhancement mechanism. Our study indicates that the enhancement resulted from the plasmonic coupling between the AgNPs on the opposite sides of graphene. Our approach towards ideal substrates offers great potential to produce a "hot surface" for enhancing the Raman response of two-dimensional materials.

Graphene-based hybrid films for plasmonic sensing

Graphene, a one-atomic-layer-thick planar sheet of sp(2)-bonded carbon configured in a two-dimensional hexagonal lattice, has attracted considerable research interest with regard to sensing-related applications owing to its extraordinary electronic, optical, chemical, and mechanical properties. Graphene plasmonics may be excited in the mid-infrared-to-terahertz regions with high spatial confinement, low loss, and excellent tunability. Meanwhile, graphene can be utilized to tune the plasmonic properties of conventional metallic nanostructures in the visible and near-infrared regions, allowing it to act as a versatile component in various plasmonic applications. This article reviews the recent progress in graphene-based hybrid films used for plasmonic sensing and detection. We particularly emphasize on the unique roles and advantages of graphene in surface-enhanced Raman scattering (SERS) for bare graphene or graphene-metal hybrid films, and plasmonic refractive index (RI) sensing for graphene-metal or graphene-insulator hybrids, among other plasmonic sensing applications. The preparation of graphene-based hybrid films, their functionalization and signal detection techniques are also reviewed. Finally, the perspectives and current challenges in the use of graphene-based hybrid films for plasmonic sensing are outlined.

An all-copper plasmonic sandwich system obtained through directly depositing copper NPs on a CVD grown graphene/copper film and its application in SERS

A simple, low-cost, all-copper sandwich system has been obtained through directly depositing Cu nanoparticles (NPs) onto a graphene sheet, which has already been grown on a Cu foil (Cu-NGF). The new design inherits two key advantages: (1) the materials of the NGF coupling system are composed of only cheaper Cu instead of Au and Ag, (2) direct fabrication of the system without transferring graphene will greatly lower the fabrication cost. More importantly, the Cu-NFG system shows a high sensitivity in surface-enhanced Raman scattering (SERS) with the highest enhancement factor (EF, over 1.89 × 10(7)) reported to date in Cu plasmonic systems. Experimental and theoretical results reveal that the strong EF is mainly because of the strong near-field coupling between Cu NPs and Cu films at the optimal angle of incidence, opening up a new route for Cu materials in SERS applications.

Adjustable plasmonic optical properties of hollow gold nanospheres monolayers and LSPR-dependent surface-enhanced Raman scattering of hollow gold nanosphere/graphene oxide hybrids

Colloidal hollow gold nanospheres with adjustable localized surface plasmon resonance (LSPR) properties were synthesized and self-assembled into HGNs monolayers for investigation of LSPR-dependent surface enhanced Raman scattering (SERS) behavior.

Environmentally friendly synthesis of graphene–silver composites with surface-enhanced Raman scattering and antibacterial activity via reduction with l-ascorbic acid/water vapor

Free-standing reduced graphene oxide–Ag composite films with different Ag contents not only possess high Raman enhancement, but also have antibacterial activity.