Conducting Polymer-Infused Electrospun Fibre Mat Modified by POEGMA Brushes as Antifouling Biointerface

Biofouling on surfaces, caused by the assimilation of proteins, peptides, lipids and microorganisms, leads to contamination, deterioration and failure of biomedical devices and causes implants rejection. To address these issues, various antifouling strategies have been extensively studied, including polyethylene glycol-based polymer brushes. Conducting polymers-based biointerfaces have emerged as advanced surfaces for interfacing biological tissues and organs with electronics. Antifouling of such biointerfaces is a challenge. In this study, we fabricated electrospun fibre mats from sulphonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (sSEBS), infused with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) (sSEBS-PEDOT), to produce a conductive (2.06 ± 0.1 S/cm), highly porous, fibre mat that can be used as a biointerface in bioelectronic applications. To afford antifouling, here the poly(oligo (ethylene glycol) methyl ether methacrylate) (POEGMA) brushes were grafted onto the sSEBS-PEDOT conducting fibre mats via surface-initiated atom transfer radical polymerization technique (SI-ATRP). For that, a copolymer of EDOT and an EDOT derivative with SI-ATRP initiating sites, 3,4-ethylenedioxythiophene) methyl 2-bromopropanoate (EDOTBr), was firstly electropolymerized on the sSEBS-PEDOT fibre mat to provide sSEBS-PEDOT/P(EDOT-co-EDOTBr). The POEGMA brushes were grafted from the sSEBS-PEDOT/P(EDOT-co-EDOTBr) and the polymerization kinetics confirmed the successful growth of the brushes. Fibre mats with 10-mers and 30-mers POEGMA brushes were studied for antifouling using a BCA protein assay. The mats with 30-mers grafted brushes exhibited excellent antifouling efficiency, ~82% of proteins repelled, compared to the pristine sSEBS-PEDOT fibre mat. The grafted fibre mats exhibited cell viability >80%, comparable to the standard cell culture plate controls. Such conducting, porous biointerfaces with POEGMA grafted brushes are suitable for applications in various biomedical devices, including biosensors, liquid biopsy, wound healing substrates and drug delivery systems.

Studies of the Sulfonated Hydrogenated Styrene-Isoprene-Styrene Block Copolymer and Its Surface Properties, Cytotoxicity, and Platelet-Contacting Characteristics

Styrenic thermoplastic elastomers (TPEs) consist of styrenic blocks. They are connected with other soft segments by a covalent linkage and are widely used in human life. However, in biomedical applications, TPEs need to be chemically hydrogenated in advance to enhance their properties such as strong UV/ozone resistance and thermal-oxidative stability. In this study, films composed of sulfonated hydrogenated TPEs were evaluated. Hydrogenated tert-butyl styrene–styrene–isoprene block copolymers were synthesized and selectively sulfonated to different degrees by reaction with acetyl sulfate. By controlling the ratio of the hydrogenated tert-butyl styrene–styrene–isoprene block copolymer and acetyl sulfate, sulfonated films were optimized to demonstrate sufficient mechanical integrity in water as well as good biocompatibility. The thermal plastic sulfonated films were found to be free of cytotoxicity and platelet-compatible and could be potential candidates in biomedical film applications such as wound dressings.

Guided protein/cell patterning on superhydrophilic polymer brushes functionalized with mussel-inspired polydopamine coatings

A simple approach for preparing bicomponent polymer patterns was developed by coating polydopamine (PDA) on superhydrophilic poly(2-acryl-amido-2-methylpropane sulfonic acid) (PAMPS) brushes. Well-defined and versatile arrays of proteins and cells were achieved without harm to proteins and cells.

Multiple microarrays of non-adherent cells on a single 3D stimuli-responsive binary polymer-brush pattern

A hierarchically binary PGAMA/PNIPAM pattern is fabricated, and multiple cell microarrays are formed on this single pattern with the aid of Con A and temperature.

Cell-inspired biointerfaces constructed from patterned smart hydrogels for immunoassays in whole blood

Inspired by stem-cell microstructure, hierarchical biointerfaces based on patterned smart hydrogels are generated for successful immunoassays in whole blood. And their sensitivity is controllable by temperature.

A Novel Platelet-Repellent Polyphenolic Surface and Its Micropattern for Platelet Adhesion Detection

Surface patterning provides a powerful tool to the diagnosis of platelet adhesion. However, the current methodologies of constructing platelet-patterned surfaces require laborious and complicated steps. Herein, a novel and simple platelet-repellent surface was reported by metal (Fe³⁺ ions)-polyphenol (tannic acid, TA) coordination interaction. The platelet-repellent effect was significantly better than that of poly(ethylene glycol) (PEG) in a long-term. Moreover, the platelet-repellent behavior could extend to other polyphenols-functionalized surfaces. On the basis of these observations, a TA-based micropattern was fabricated in situ by one-step microcontact printing for well-defined platelet adhesion, which can effectively avoid the traditional introduction of inert hydrophilic polymers and bioactive ligands. Afterward, the TA-based micropattern was applied to monitor the adhesion of defective platelets treated with an antiplatelet drug (tirofiban). This work provided a facile, versatile, and environmentally friendly strategy to construct platelet-repellent polyphenolic surfaces and their micropattern. We expect that this simple micropattern could act as a low-cost and label-free platform for biomaterials and biosensors, and could be widely used in the clinical diagnoses of platelet adhesive functions and the evaluation of antiplatelet therapies.

Advanced Materials for the Recognition and Capture of Whole Cells and Microorganisms

Selective cell recognition and capture has recently attracted significant interest due to its potential importance for clinical, diagnostic, environmental, and security applications. Current methods for cell isolation from complex samples are largely dependent on cell size and density, with limited application scope as many of the target cells do not exhibit appreciable differences in this respect. The most recent and forthcoming developments in the area of selective recognition and capture of whole cells, based on natural receptors, as well as synthetic materials utilising physical and chemical properties of the target cell or microorganism, are highlighted. Particular focus is given to the development of cell complementary surfaces using the cells themselves as templating agents, by means of molecular imprinting, and their combination with sensing platforms for rapid cell detection in complex media. The benefits and challenges of each approach are discussed and a perspective of the future of this research area is given.

A photonic crystal hydrogel suspension array for the capture of blood cells from whole blood

Diagnosing hematological disorders based on the separation and detection of cells in the patient's blood is a significant challenge. We have developed a novel barcode particle-based suspension array that can simultaneously capture and detect multiple types of blood cells. The barcode particles are polyacrylamide (PAAm) hydrogel inverse opal microcarriers with characteristic reflection peak codes that remain stable during cell capture on their surfaces. The hydrophilic PAAm hydrogel scaffolds of the barcode particles can entrap various plasma proteins to capture different cells in the blood, with little damage to captured cells.

Capturing red blood cells from the blood by lectin recognition on a glycopolymer-patterned surface

A glycopolymer-patterned surface selectively captures red blood cells from the blood by lectin recognition in a harmless manner.

Creating surface patterns of polymer brushes by degrafting via tetrabutyl ammonium fluoride

We demonstrate the use of tetrabutyl ammonium fluoride (TBAF) for creating spatial patterns of poly(methyl methacrylate) (PMMA) brushes on a flat silica support by degrafting PMMA grafted chains from selected regions on the substrate.