Highly fluorescent quinone-capped silver hydrosol for environmental remediation and sensing applications

A metal-enhanced fluorescence was achieved from in situ-generated Ag0 nanoparticles in the proximity of 2-hydroxy benzaldehyde (2HB). Such nanoparticles eliminated methyl blue (MB) dye from water exclusively in the presence of Zn2+ and were proven to be an efficient adsorbent for environmental remediation (maximum uptake capacity 1065 mg·g-1). Ag was zero valent in the absorbent, while Zn2+ was in Zn(OH)2 form. Fe3+ brought back MB in the aqueous medium due to the strong interaction of MB with Fe3+ and the regeneration of blue color helped to design a selective and sensitive Fe3+ sensing platform colorimetrically (linear detection range 10-4-10-6 M; linear detection limit 10-6 M). The silver nanoparticle-induced metal-enhanced fluorescence was quenched efficiently with MB. Pb2+ restored the quenched fluorescence by removing MB from the proximity of the metalized surface of silver, and Pb2+ sensing was performed fluorometrically (linear detection range; 10-5-5 × 10-8 M limit of detection 5 × 10-8 M). Iron and lead were also estimated in a variety of natural water sources, including rainfall, drinking water from taps, and water from the Ganga River via spiking method.

An efficient fluorescence reversible regulation strategy with single labelled oligonucleotide HEX-OND successively triggered by Hg(II) and Cysteine: The application and mechanism

An efficient fluorescence reversible regulation system with HEX-OND was developed. Then the application potential was explored in probing Hg(II) & Cysteine (Cys) in real samples and the thermodynamic mechanism was further investigated by precise theory analysis combining multiple spectroscopic methods. The results showed that only mere disturbances were observed among 15 and 11 kinds of other substances for the optimal system in detecting Hg(II) & Cys, respectively; The linear ranges of quantification were identified as 1.0 ∼ 14.0 and 2.0 ∼ 20.0 (×10^-8 mol/L) with LODs of 8.75 and 14.09 (×10^-9 mol/L) for Hg(II) and Cys, respectively; no significant deviations were found in the quantification results of Hg(II) in three traditional Chinese herbs and Cys in two samples between the well-understood methods with ours respectively, showing excellent selectivity, sensitivity, and tremendous application feasibility. The detailed mechanism was further verified as that the introduced Hg(II) forced HEX-OND to transform into the Hairpin structure with the apparent equilibrium association constant of 6.02 ± 0.62 × 10¹⁰ L/mol in the bimolecular ratio, leading to the equimolar quencher, consecutive two guanine bases ((G)₂), approaching and spontaneously static-quenching the reporter HEX (hexachlorofluorescein) (equilibrium constant, 8.75 ± 1.97 × 10⁷ L/mol) in the Photo-induced Electron Transfer (PET) way that was driven by the Electrostatic Interaction. The additional Cys destructed the equimolar Hairpin structure with the apparent equilibrium constant of 8.87 ± 2.47 × 10⁵ L/mol through breaking one of the formed T-Hg(II)-T mismatches by association with the involved Hg(II), occasioning (G)₂ apart from HEX and consequently the fluorescence recovery.

Novel Technology for the Removal of Brilliant Green from Water: Influence of Post-Oxidation, Environmental Conditions, and Capping

Chemical dyes are used in a wide range of anthropogenic activities and are generally not biodegradable. Hence, sustainable recycling processes are needed to avoid their accumulation in the environment. A one-step synthesis of Fe_core-maghemite_shell (Fe-MM) for facile, instantaneous, cost-effective, sustainable, and efficient removal of brilliant green (BG) dye from water has been reported here. The homogenous and monolayer type of adsorption is, to our knowledge, the most efficient, with a maximum uptake capacity of 1000 mg·g^-1, for BG on Fe-MM. This adsorbent was shown to be efficient in occurring in time-scales of seconds and to be readily recyclable (ca. 91%). As iron/iron oxide possesses magnetic behavior, a strong magnet could be used to separate Fe-MM coated with BG. Thus, the recycling process required a minimum amount of energy. Capping Fe-MM by hydrophilic clay minerals further enhanced the BG uptake capacity, by reducing unwanted aggregation. Interestingly, capping the adsorbent by hydrophobic plastic (low-density polyethylene) had a completely inverse effect on clay minerals. BG removal using this method is found to be quite selective among the five common industrial dyes tested in this study. To shed light on the life cycle analysis of the composite in the environment, the influence of selected physicochemical factors (T, pH, hν, O₃, and NO₂) was examined, along with four types of water samples (melted snow, rain, river, and tap water). To evaluate the potential limitations of this technique, because of likely competitive reactions with metal ion contaminants in aquatic systems, additional experiments with 13 metal ions were performed. To decipher the adsorption mechanism, we deployed four reducing agents (NaBH₄, hydrazine, LiAlH₄, and polyphenols in green tea) and NaBH₄, exclusively, favored the generation of an efficient adsorbent via aerial oxidation. The drift of electron density from electron-rich Fe_core to maghemite shells was attributed to be responsible for the electrostatic adsorption of N⁺ in BG toward Fe-MM. This technology is deemed to be environmentally sustainable in environmental remediation, namely, in waste management protocol.

Evolution of Silver-Mediated, Enhanced Fluorescent Au-Ag Nanoclusters under UV Activation: A Platform for Sensing

Here, we report the synthesis of dopamine (DA)-mediated Au-Ag bimetallic nanoclusters in aqueous solution under UV activation. The success story emerges from monometallic fluorescent nanocluster evolution from photoactivation of gold as well as silver precursor compounds along with DA. The intriguing fluorescence property of the nanocluster relates to facile incorporation of Ag in Au, showing a 6-fold enhancement of the emission profile than simply DA-mediated Au nanoclusters. Silver effect, which is classified under the synergism, is the main reason behind such enhancement of fluorescence. The as-synthesized nanoclusters are robust and can be vacuum-dried and redispersed for repetitive application. The intriguing fluorescence of bimetallic nanoclusters is found to be quenched selectively in the presence of sulfide ion in an aqueous medium, paving the way for nanomolar detection of sulfide in water. The utility of the sensing platform has been verified employing different environmental water effluents.

Solvent Polarity-Dependent Behavior of Aliphatic Thiols and Amines toward Intriguingly Fluorescent AuAgGSH Assembly

Highly stable fluorescent glutathione (GSH)-protected AuAg assembly has been synthesized in water under UV irradiation. The assembly is composed of small Ag₂/Ag₃ clusters. These clusters gain stability through synergistic interaction with Au(I) present within the assembly. This makes the overall assembly fluorescent. Here, GSH acts as a reducing as well as stabilizing agent. The assembly is so robust that it can be vacuum-dried to solid particles. The as-obtained solid is dispersible in nonaqueous solvents. The interaction between solvent and the assembly provides stability to the assembly, and the assembly shows fluorescence. It is interesting to see that the behavior of long-chain aliphatic thiols or amines toward the fluorescent assembly is altogether a different phenomenon in aqueous and nonaqueous mediums. The assembly gets ruptured in water due to direct interaction with long-chain thiols or amines, whereas in nonaqueous medium, solvation of added thiols or amines becomes pronounced, which hinders the interaction of solvent with the assembly. However, the fluorescence of the assembly is always quenched with thiols or amines no matter what the solvent medium is. In aqueous medium, the fluorescence quenching by aliphatic thiol or amine becomes pronounced with successive decrease in their chain length, whereas in nonaqueous medium, the trend is just reversed with chain length. The reasons behind such an interesting reversal of fluorescence quenching in aqueous and nonaqueous solvents have been discussed explicitly. Again, in organic solvents, thiol or amine-induced quenched fluorescence is selectively recovered by Pb(II) ion without any alteration of excitation and emission maxima. This phenomenon is not observed in water because of the ruptured fluorescent assembly. The fluorescence recovery by Pb(II) and unaltered emission peak only in nonaqueous solvent unequivocally prove the engagement of Pb(II) with thiols or amines, which in turn revert the original solvent-supported stabilization of the assembly.

Aggregation induced emission of gold(i) complexes in water or water mixtures

Gold(i) complexes are an expanding area of investigation due to the possibility of giving rise to supramolecular aggregates with particular morphologies that can be modulated together with their luminescent properties.

Unexpected Thiols Triggering Photoluminescent Enhancement of Cytidine Stabilized Au Nanoclusters for Sensitive Assays of Glutathione Reductase and Its Inhibitors Screening

The photoluminescence (PL) of nonthiolate ligand capped Au nanoclusters (NCs) is usually quenched by thiols due to the tight adsorption of thiols to the Au surface and formation of larger non-PL species. However, we here report an unexpected PL enhancement of cytidine stabilized Au (AuCyt) NCs triggered by thiols, such as reduced glutathione (GSH) at sub-μM level, while such phenomena have not been observed for Au NCs capped with similar adenosine/cytidine nucleotides. The mass spectroscopic results indicate that this enhancement may be caused by the formation of smaller, but highly fluorescent, Au species etched by thiols. This enables the sensitive detection of GSH from 20 nM to 3 μM, with an ultralow detection limit of 2.0 nM. Moreover, the glutathione reductase (GR) activity can be determined by the initial rate of GSH production, i.e., the maximum PL increasing rate, with a linear range of 0.34-17.0 U/L (1 U means reduction of 1.0 μmol of oxidized glutathione per min at pH 7.6 at 25 °C) and a limit of detection of 0.34 U/L. This method allows the accurate assays of GR in clinical serum samples as well as the rapid screening of GR inhibitors, indicating its promising biomedical applications.

Synergism of gold and silver invites enhanced fluorescence for practical applications

Synergism of gold and silver improves fluorescence behavior of gold–silver bimetallic clusters with practical applications.

Enlightening surface plasmon resonance effect of metal nanoparticles for practical spectroscopic application

Pictorial depiction of applications of metal nanoparticles in different fields enlightening surface plasmon resonance effect.

Orange-red silver emitters for sensing application and bio-imaging

Strongly fluorescent HFL-containing Ag@Au particles are synthesized via a modified hydrothermal technique. This solution is used for sulfide sensing and cell imaging.

Intriguing cysteine induced improvement of the emissive property of carbon dots with sensing applications

A simple fluorometric technique has been adopted for cysteine (Cys) sensing in alkaline medium down to the nM level. The huge fluorescent signal of the solution is a consequence of fluorescent carbon dots (CDs) produced in situ from modified hydrothermal (MHT) reaction between Cys and dopamine (DA). It has been observed that the inherent fluorescence of DA is drastically quenched in alkaline solution. Cys can selectively rescue the fluorescence of DA. Thus, Cys determination in a straightforward way, but only to a micro molar (10(-7) M i.e. 0.1 μM) level is possible through such fluorescence enhancement. Sensitive Cys determination remains associated with the in situ generated CDs, but the external addition of pre-formed CDs to Cys solution fails miserably towards Cys detection. However, CDs prepared from the Cys-DA system in alkaline solution admirably increase the limit of detection (LOD) of Cys at least two orders higher (10(-9) M) than that observed without hydrothermal technique i.e., without CDs. This method finds applications for Cys determination in biological samples and pharmaceutical preparations.