Introducing Novel Redox-Active Bis(phenolate) N-Heterocyclic Carbene Proligands: Investigation of Their Coordination to Fe(II)/Fe(III) and Their Catalytic Activity in Transfer Hydrogenation of Carbonyl Compounds

A simple and efficient procedure for synthesizing novel pincer-type tridentate N-heterocyclic carbene bisphenolate ligands is reported. The synthesis of pincer proligands with N,N'-disubstituted imidazoline core, 5 and 6, was carried out via triethylorthoformate-promoted cyclization of either N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)cyclohexanediamine, 3, or N,N'-bis(2-hydroxyphenyl)cyclohexanediamine, 4, in the presence of concentrated hydrochloric acid. Cyclic voltammograms of the ligands revealed ligand-centered redox activity, indicating the noninnocent nature of the ligands. The voltammograms of the ligands exhibit two successive one-electron oxidations and two consecutive one-electron reductions. In contrast to previous reports, the redox-active ligands in this study exhibit one-electron oxidation and reduction processes. All products were thoroughly characterized by using 1H and 13C NMR spectroscopy. The base-promoted deprotonation of the proligands and subsequent reaction with iron(II) and iron(III) chlorides yielded compounds 7 and 8. These compounds are binuclear and tetranuclear iron(III) complexes that do not contain carbene functional groups. Complexes 7 and 8 were characterized by using elemental analysis and single-crystal X-ray crystallography. At low catalyst loadings, both 7 and 8 exhibited high catalytic activity in the transfer hydrogenation of selected aldehydes and ketones.

Trianionic Carbocyclic NCN Pincer Ligand: Coordination Chemistry and Reactivity Studies

(BCHT-NCN)H3 (1) [1,6-bis(methylene(bis-2,6-diisopropylaniline)(benzo)cycloheptatriene)] was synthesized by nucleophilic substitution treating 1,6-bis(methylenebromide)(benzo)cycloheptatriene with 2 equiv of Li[2,6-iPr2C6H3NH], Li[Dipp-NH]. Triple deprotonation of (BCHT-NCN)H3 (1) using n-BuLi yields the deprotonation product [(BCHT-NCN)Li3] (2), which crystallizes as a dimer [{[BCHT-NCN]Li3(Et2O)2}2] (2)2. Coordination compounds of the trianionic pincer ligand were obtained with SnCl2, YCl3(THF)3.5, and HfCl4(THF)2: [(BCHT-NCN)SnLi] (3), [(BCHT-NCN)Y(THF)2] (4), [(BCHT-NCN)HfCl2][Li(THF)4] (5), respectively. A hafnium hydride complex [(BCHT-NCN)HfH(HBEt3)][K(Et2O)2] (6) was isolated after reaction of 5 with K[HBEt3]. A MeNHC substitution product [(BCHT-NCN)HfCl(MeNHC)] (7) was synthesized treating compound 5 with MeNHC at rt. Following an n-BuLi reaction of 7 gives an alkyl complex [(BCHT-NCN)Hf(n-Bu)(MeNHC)] (8). Thermolysis of 7 yields the isomerization product [(BCHT-NCN#)HfCl(MeNHC)] (9), which was transferred into a methyl complex [(BCHT-NCN#)HfMe(MeNHC)] (10) upon treatment with MeMgBr. Hydride abstraction from complex 9 leads to a cationic complex [(BCHT-NCN+)HfCl(MeNHC)][Al(OtBuF)4] (11).

Nickel Pincer Complexes Catalyzed Sustainable Synthesis of 3,4-Dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxides via Acceptorless Dehydrogenative Coupling of Primary Alcohols

We report the atom-economic and sustainable synthesis of biologically important 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxide (DHBD) derivatives from readily available aromatic primary alcohols and 2-aminobenzenesulfonamide catalyzed by nickel(II)-N∧N∧S pincer-type complexes. The synthesized nickel complexes have been well-studied by elemental and spectroscopic (FT-IR, NMR, and HRMS) analyses. The solid-state molecular structure of complex 2 has been authenticated by a single-crystal X-ray diffraction study. Furthermore, a series of 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxide derivatives have been synthesized (24 examples) utilizing a 3 mol % Ni(II) catalyst through acceptorless dehydrogenative coupling of benzyl alcohols with benzenesulfonamide. Gratifyingly, the catalytic protocol is highly selective with the yield up to 93% and produces eco-friendly water/hydrogen gas as byproducts. The control experiments and plausible mechanistic investigations indicate that the coupling of the in situ generated aldehyde with benzenesulfonamide leads to the desired product. In addition, a large-scale synthesis of one of the thiadiazine derivatives unveils the synthetic usefulness of the current methodology.

Ligand-enforced geometric constraints and associated reactivity in p-block compounds

The geometry at an element centre can generally be predicted based on the number of electron pairs around it using valence shell electron pair repulsion (VSEPR) theory. Strategies to distort p-block compounds away from these predicted geometries have gained considerable interest due to the unique structural outcomes, spectroscopic properties or reactivity patterns engendered by such distortion. This review presents an up-to-date group-wise summary of this exciting and rapidly growing field with a focus on understanding how the ligand employed unlocks structural features, which in turn influences the associated reactivity. Relevant geometrically constrained compounds from groups 13-16 are discussed, along with selected stoichiometric and catalytic reactions. Several areas for advancement in this field are also discussed. Collectively, this review advances the notion of geometric tuning as an important lever, alongside electronic and steric tuning, in controlling bonding and reactivity at p-block centres.

Role of Bis(phosphinimino)methanides as Universal Ligands in the Coordination Sphere of Metals across the Periodic Table

The coordination chemistry of bis(phosphinimino)methanide ligands is widespread and accompanies a large number of metal ions in the periodic table ranging from lithium to neptunium. This unique class of ligand systems show copious coordination chemistry with the main-group, transition, rare-earth, and actinide metals and are considered to be among the most attractive ligand systems to researchers. The bis(phosphinimino)methanide metal complexes offer an extensive range of applications in various fields and have been demonstrated as one of the universal ligand systems to stabilize the metal ions in not only their usual but also their unusual oxidation states. The main-group and transition metal chemistry using bis(phosphinimino)methanides as ligands was last updated almost a decade ago. In this review, we provide a comprehensive overview of various state-of-the-art bis(phosphinimino)methanide-supported metal complexes by dealing with their synthesis, characterization, reactivity, and catalytic studies which were not included in the last critical reviews.

Hydrogenation of CO2 to MeOH Catalyzed by Highly Robust (PNNP)Ir Complexes Activated by Alkali Bases in Alcohol

Despite receiving significant attention, well-defined homogeneous complexes for hydrogenation of carbon dioxide (CO2) to methanol (MeOH) are scarce and suffer issues of low catalyst turnover numbers (TONs) at high catalyst concentrations and deactivation in the presence of CO and at elevated temperatures. Herein, we disclose a system deploying sterically demanded (PNNP)Ir complexes for a sustained activity for hydrogenation of CO2 to MeOH at temperatures ∼200 °C in an alcohol solvent. Through reaction optimization, we achieved a TON of ∼9000 for MeOH formation, which exceeds most active homogeneous systems reported to date, and robustness on par with or exceeding most reactive systems utilizing amine additives was demonstrated. The key to achieving sustained catalyst turnover for the system was utilizing a catalytic amount of an alkali base additive, which serves the dual purpose of facilitating more efficient outer-sphere reduction of CO2 and HCO2Et and enhancing the selectivity of MeOH over in situ formed CO.

Synthesis and structure of Pd(II) pincer complexes: catalytic application in β-alkylation of secondary alcohols involving sequential dehydrogenation of alcohols via the borrowing hydrogen approach

Herein, we report an efficient and sustainable approach for the selective synthesis of ketones by palladium pincer catalyzed β-alkylation of secondary alcohols with aromatic primary alcohols via the borrowing hydrogen (BH) approach for the first time. A set of new Pd(II) ONO pincer complexes was synthesized and characterised by elemental analysis and spectral techniques (FT-IR, NMR and HRMS). The solid-state molecular structure of one the complexes was corroborated by X-ray crystallography. A range of α-alkylated ketone derivatives (25 examples) was obtained in excellent yields up to 95% through sequential dehydrogenative coupling of secondary and primary alcohols with 0.5 mol% catalyst loading with a substoichiometric amount of the base. Control experiment studies were carried out for the coupling reactions which revealed that the reaction involves an aldehyde, a ketone and chalcone intermediates, and eventually established the borrowing hydrogen strategy. Gratifyingly, this protocol is simple and atom economical, with water/hydrogen as byproducts. In addition, large-scale synthesis also demonstrated the synthetic usefulness of the present protocol.

Catalytic Mechanisms of Transfer Hydrogenation of Azobenzene with Ammonia Borane by Pincer Bismuth Complex: Crucial Role of C=N Functional Group on the Pincer Ligand

Transfer hydrogenation of azobenzene with ammonia borane mediated by pincer bismuth complex 1 was systematically investigated through density functional theory calculations. An unusual metal-ligand cooperation mechanism was disclosed, in which the saturation/regeneration of the C=N functional group on the pincer ligand plays an essential role. The reaction is initiated by the hydrogenation of the C=N bond (saturation) with ammonia borane to afford 3^CN , which is the rate-determining step with Gibbs energy barrier (ΔG^≠ ) and Gibbs reaction energy (ΔG) of 25.6 and -7.3 kcal/mol, respectively. 3^CN is then converted to a Bi-H intermediate through a water-bridged pathway, which is followed up with the transfer hydrogenation of azobenzene to produce the final product N,N'-diphenylhydrazine and regenerate the catalyst. Finally, the catalyst could be improved by substituting the phenyl group for the tert-butyl group on the pincer ligand, where the ΔG^≠ value (rate-determining step) decreases to 24.0 kcal/mol.

Synthesis and reactivity of PC(sp3)P-pincer iridium complexes bearing a diborylmethyl anion

Novel PCP-pincer iridium complexes bearing a diborylmethyl anion were synthesized. Strong σ-electron-donation to the metal and significant π-backdonation from the metal to boron atoms at the β-position were observed both experimentally and computationally. H/D exchange of the aromatic C-H bond proceeded smoothly and, in addition, the α-methine-hydrogen between boron atoms was found to be replaced with deuterium in benzene-d₆ solution possibly through diborylcarbene metal complexes as intermediates.

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of a phosphine-free SNS-pincer ligand in metal–ligand cooperative hydroboration catalysis was investigated. The bifunctional thiolate donor and spin-state change to high-spin Mn are crucial to accessing low-energy activation barriers.

CO2 Cleavage Reaction Driven by Alkylidyne Complexes of Group 6 Metals and Uranium: A Density Functional Theory Study on Energetics, Reaction Mechanism, and Structural/Bonding Properties

Designing novel catalysts is essential for the efficient conversion of metal alkylidyne into metal oxo ketene complexes in the presence of CO₂, which to some extent resolves the environmental concerns of the ever-increasing carbon emission. In this regard, a series of metal alkylidyne complexes, [b-ONO]M≡CCH₃(THF)₂ ([b-ONO] = {(C₆H₄[C(CF₃)₂O])₂N}^3-; M = Cr, Mo, W, and U), have been comprehensively studied by relativistic density functional theory calculations. The calculated thermodynamics and kinetics unravel that the tungsten complex is capable of catalyzing the CO₂ cleavage reaction, agreeing with the experimental findings for its analogue. Interestingly, the uranium complex shows superior catalytic performance because of the associated considerably lower energy barrier and larger reaction rate constant. The M≡C moiety in the complexes turns out to be the active site for the [2 + 2] cyclic addition. In contrast, complexes of Cr and Mo could not offer good catalytic performance. Along the reaction coordinate, the M-C (M = Cr, Mo, W, and U) bond regularly transforms from triple to double to single bonds; concomitantly, the newly formed M-O in the product is identified to have a triple-bond character. The catalytic reactions have been extensively explained and addressed by geometric/electronic structures and bonding analyses.

Transformation of the sp2 Carbanion to Carbene with Subsequent 1,1-Migratory Insertion and Nucleophilic Substitution in Rare-Earth Metal Chemistry

The development of Fischer-type electrophilic carbene chemistry with early transition metals has been a great challenge due to the fact that such metals in their high oxidation states lack the d electrons to stabilize the electrophilic carbene. Herein, we disclose the first experimental and theoretical findings of in situ transformation of an sp² carbanion to a Fischer-type electrophilic carbene with rare-earth metals in their high oxidation state with a d⁰ electron via electron transfer. The carbene may undergo 1,1-migratory insertion into an adjacent RE-C(sp³) bond, and an unprecedented ring opening of the indole ring of the ligand occurs when the carbenes undergo nucleophilic substitution with a special organolithium reagent o-Me₂NC₆H₄CH₂Li. The key to success is the uniquely tailored novel ligand systems featuring a suitable conjugate building block (^-C═C-C═N) bearing an sp² carbanion connected to the rare-earth metal center.

Chemically robust and readily available quinoline-based PNN iron complexes: application in C-H borylation of arenes

Iron catalysts have been used for over a century to produce ammonia industrially. However, the use of iron catalysts generally remained quite limited until relatively recently, when the abundance and low toxicity of iron spurred the development of a variety of iron catalysts. Despite the fact that iron catalysts are being developed as alternatives to precious metal catalysts, their reactivities and stabilities are quite different because of their unique electronic structures. In this context, our group previously developed a new family of quinoline-based PNN pincer-type ligands for low- to mid-valent iron catalysts. These chemically robust PNN ligands provide air- and moisture-tolerant iron complexes, which exhibit excellent catalytic performances in the C-H borylation of arenes. This feature article summarises our recent work on PNN iron complexes, including their conception and design, as well as related reports on iron pincer complexes and iron-catalysed C-H borylation reactions.

A bis(imino)carbazolate pincer ligand stabilized mononuclear gallium(I) compound: synthesis, characterization, and reactivity

The first bis(imino)carbazolate pincer ligand supported mononuclear Ga(I) compound LGa: (3) was synthesized and fully characterized. Oxidation of 3 with elemental selenium afforded the dinuclear Ga(III) compound [LGa(μ-Se)]₂ (4) bearing two bridging Se atoms. Ligand substitution of Cr(CO)₆ with 3 under UV light irradiation afforded the gallylene-chromium complex LGa: → Cr(CO)₅ (5). In addition, the attempted synthesis of the aluminium analogue LAl: through reduction of LAlI₂ (7) only led to isolation of the dinuclear Al(III) compound (LAlI)₂ (8), most probably formed through the C-C coupling of two imino radicals.

Designed pincer ligand supported Co(II)-based catalysts for dehydrogenative activation of alcohols: Studies on N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines

Base-metal catalysts Co1, Co2 and Co3 were synthesized from designed pincer ligands L1, L2 and L3 having NNN donor atoms respectively. Co1, Co2 and Co3 were characterized by IR, UV-Vis. and ESI-MS spectroscopic studies. Single crystal X-ray diffraction studies were investigated to authenticate the molecular structures of Co1 and Co3. Catalysts Co1, Co2 and Co3 were utilized to study the dehydrogenative activation of alcohols for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines. Under optimized reaction conditions, a broad range of substrates including alcohols, anilines and ketones were exploited. A series of control experiments for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines were examined to understand the reaction pathway. ESI-MS spectral studies were investigated to characterize cobalt-alkoxide and cobalt-hydride intermediates. Reduction of styrene by evolved hydrogen gas during the reaction was investigated to authenticate the dehydrogenative nature of the catalysts. Probable reaction pathways were proposed for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines on the basis of control experiments and detection of reaction intermediates.

Direct para-Selective C-H Amination of Iodobenzenes: Highly Efficient Approach for the Synthesis of Diarylamines

Iodine(III)-mediated synthesis of 4-iodo-N-phenylaniline from iodobenzene has been achieved, and the reaction can proceed under mild conditions. A variety of functional groups were well tolerated, providing the corresponding products in moderate to good yields. The remaining iodine group provides an effective platform for converting the products into several valuable asymmetric diphenylamines. Most importantly, this reaction can be easily scaled up to the ten-gram scale, highlighting its synthetic utility. The mechanistic study revealed that the in situ generated aryl hypervalent iodine intermediate is the key factor to realize this para-selective C-H amination reaction.

Achiral and chiral NNN-pincer nickel complexes with oxazolinyl backbones: application in transfer hydrogenation of ketones

NNN-based achiral and chiral (oxazolinyl)amido-pincer nickel complexes are developed and employed for the catalytic transfer hydrogenation of ketones.

Synthesis and characterization of group 13 dichloride (M = Ga, In), dimethyl (M = Al) and cationic methyl aluminum complexes supported by monoanionic NNN-pincer ligands

A series of monoanionic NNN-pincer ligands effectively stabilize five-coordinate gallium and indium dichloride complexes, as well as neutral dimethyl aluminum species, and organometallic cations thereof.

Trianionic binucleating bis(trityl)/aryloxide ligands and their lithium, magnesium, and zinc complexes

A series of lithium complexes with trianionic bis(trityl)/aryloxide ligands were prepared by triple deprotonation of phenols with two ortho-diarylmethyl substituents. Transmetalation with one of the lithium complexes via salt metathesis resulted in the synthesis of corresponding Mg and Zn complexes, which showed distinct coordination stoichiometry and structures. The metal complexes were characterized by multi-nuclear NMR, UV–vis, and infrared spectroscopy. Additionally, the redox property of a trilithium compound was investigated by electrochemical methods. X-ray crystallography revealed that the new bis(trityl)/aryloxide ligands could simultaneously bind to two nearby metal centers both in chelating κ2-O,C fashion, making themselves rare examples of tridentate binucleating alkyl/aryloxo scaffolds.

NHC Core Pincer Ligands Exhibiting Two Anionic Coordinating Extremities

The chemistry of NHCcore pincer ligands of LX₂ type bearing two pending arms, identical or not, whose coordinating center is anionic in nature, is here reviewed. In this family, the negative charge of the coordinating atoms can be brought either by a carbon atom via a phosphonium ylide (R₃P⁺-CR₂^-) or by a heteroatom through amide (R₂N^-), oxide (RO^-), or thio(seleno)oxide (RS^-, RSe^-) donor functionalities. Through selected examples, the synthetic methods, coordination properties, and applications of such tridentate systems are described. Particular emphasis is placed on the role of the donor ends in the chemical behavior of these species.

Polyaromatic hydrocarbon derivatized azo-oximes of cobalt(iii) for the ligand-redox controlled electrocatalytic oxygen reduction reaction

Two new polyaromatic hydrocarbon (PAH) derivatized cobalt(iii) azo-oxime complexes were synthesized and their activity in electrocatalytic oxygen reduction reaction (ORR) were explored.

Homogeneous cobalt-catalyzed reductive amination for synthesis of functionalized primary amines

The development of earth abundant 3d metal-based catalysts continues to be an important goal of chemical research. In particular, the design of base metal complexes for reductive amination to produce primary amines remains as challenging. Here, we report the combination of cobalt and linear-triphos (bis(2-diphenylphosphinoethyl)phenylphosphine) as the molecularly-defined non-noble metal catalyst for the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds, gaseous ammonia and hydrogen in good to excellent yields. Noteworthy, this cobalt catalyst exhibits high selectivity and as a result the -NH₂ moiety is introduced in functionalized and structurally diverse molecules. An inner-sphere mechanism on the basis of the mono-cationic [triphos-CoH]⁺ complex as active catalyst is proposed and supported with density functional theory computation on the doublet state potential free energy surface and H₂ metathesis is found as the rate-determining step.