A strategy for high ethylene polymerization performance using titanium single-site catalysts

The synthesis of heterogeneous Ti(IV)-based catalysts for ethylene polymerization following surface organometallic chemistry concepts is described. The unique feature of this catalyst arises from the silica support, KCC-1700. It has (i) a 3D fibrous morphology that is essential to improve the diffusion of the reactants, and (ii) an aluminum-bound hydroxyl group, [(Si-O-Si)(Si-O-)2Al-OH] 2, used as an anchoring site. The [(Si-O-Si)(Si-O-)(Al-O-)TiNp3] 3 catalyst was obtained by reacting 2 with a tetrakis-(neopentyl) titanium TiNp4. The structure of 3 was fully characterized by FT-IR, advanced solid-state NMR spectroscopy [1H, 13C], elemental and gas-phase analysis (ICP-OES and CHNS analysis), and XPS. The benefits of combining these morphological (3D structure) and electronic properties of the support (aluminum plus titanium) were evidenced in ethylene polymerization. The results show a remarkable enhancement in the catalytic performance with the formation of HDPE. Notably, the resulting HDPE displays a molecular weight of 3 200 000 g mol-1 associated with a polydispersity index (PD) of 2.3. Moreover, the effect of the mesostructure (2D vs. 3D) was demonstrated in the catalytic activity for ethylene polymerization.

Sustainable catalysts for efficient triazole synthesis: an immobilized triazine-based copper-NNN pincer complex on TiO2

The multistep synthesis of a hybrid material based on a TiO2 core with an immobilized triazine-based copper(II)-NNN pincer complex is reported. The formation of the material was confirmed by FT-IR spectroscopy and elemental and thermogravimetric analyses, and the loading by copper ions was quantified by ICP/OES analysis. The properties of the hybrid material were further investigated by X-ray photoelectron spectroscopy (XPS), contiuous wave electron spin resonance (CW-ESR), UV-vis spectroscopy, and argon sorption. Efficient and regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles was achieved by employing the hybrid material as a catalyst in a mixture of H2O/EtOH as a green solvent with excellent catalytic activity with a TOF up to 495 h-1 at 50 °C. The reusability of the prepared hybrid material in the catalytic reaction was possible over five consecutive runs without significant loss of catalytic activity. The described method represents an effective way to ensure sustainable use of pincer complexes in catalytic systems by immobilizing them on solid supports, resulting in a hybrid organic-inorganic catalyst platform.

Controlled Growth of Platinum Nanoparticles on Amorphous Silica from Grafted Pt-Disilicate Complexes

Supported platinum nanoparticles are currently the most functional catalysts applied in commercial chemical processes. Although investigations have been performed to improve the dispersion and thermal stability of Pt particles, it is challenging to apply amorphous silica supports to these systems owing to various Pt species derived from the non-uniform surface structure of the amorphous support. Herein, we report the synthesis and characterization of amorphous silica-supported Pt nanoparticles from (cod)Pt-disilicate complex (cod = 1,5-cyclooctadiene), which forms bis-grafted surface Pt species regardless of surface heterogeneity. The synthesized Pt nanoparticles were highly dispersible and had higher hydrogenation activity than those prepared by the impregnation method, irrespective of the calcination and reduction temperatures. The high catalytic activity of the catalyst prepared at low temperatures (such as 150 °C) was attributed to the formation of Pt nanoparticles triggered by the reduction of cod ligands under H₂ conditions, whereas that of the catalyst prepared at high temperatures (up to 450 °C) was due to the modification of the SiO₂ surface by grafting of the (cod)Pt-disilicate complex.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Photoactive silicon surfaces functionalized with high-quality and redox-active platinum diimine complex monolayers

Platinum diimine complexes can covalently be grafted onto oxide-free, hydrogen-terminated silicon(111) surfaces into clean and high-quality monolayers. The so modified surfaces offer great prospects as photocathodes for solar-driven electrocatalysis.

Bidentate Disilicate Framework for Bis-Grafted Surface Species

Recent advances in surface organometallic chemistry have enabled the detailed characterization of the surface species in single-site heterogeneous catalysts. However, the selective formation of bis-grafted surface species remains challenging because of the heterogeneity of the supporting surface. Herein, we introduce a metal complex bearing bidentate disilicate ligands, -OSi(O^t Bu)₂ OSi(O^t Bu)₂ O-, as a molecular precursor, which has a silicate framework adjacent to the metal (Pt) center. The grafting of the precursors on silica supports (MCM-41 and CARiACT Q10) proceeded through a substitution reaction on the silicon atoms of the disilicate ligand, which was verified by the detection of isobutene and ^t BuOH as the elimination products, to selectively yield bis-grafted surface species. The chemical structure of the surface species was characterized by solid-state NMR, and the chemical shift values of the ancillary ligands and ¹⁹⁵ Pt nuclei suggested that the bidentate coordination sphere was maintained following grafting.

Propylene Oxide Formation on a Silica Surface with Peroxo Defects: Implications in Astrochemistry

The formation of the chiral molecule propylene oxide (CH₃CHCH₂O) recently detected in the interstellar medium (ISM) is proposed to take place on an amorphous silicate grain surface where peroxo defects are present. A computational analysis conducted at the DFT and MP2-F12 levels of theory on a neat amorphous silica model supports such a hypothesis resulting in (a) strong thermodynamic driving forces and low activation energies allowing the synthesis of CH₃CHCH₂O at low temperatures, (b) chemical defects on silica surfaces promoting heterogeneous catalysis of the increasing molecular complexity found in interstellar and circumstellar medium, and (c) chemical defects that have implications on understanding how processing phases modify the nature of the reactive groups on a silica surface affecting the surface catalytic activity.

Synthesis of Reusable Silica Nanosphere-Supported Pt(IV) Complex for Formation of Disulfide Bonds in Peptides

Some peptide-based drugs, including oxytocin, vasopressin, ziconotide, pramlintide, nesiritide, and octreotide, contain one intramolecular disulfide bond. A novel and reusable monodispersed silica nanosphere-supported Pt(IV) complex (SiO₂@TPEA@Pt(IV)); TPEA: N-[3-(trimethoxysilyl)propyl]ethylenediamine) was synthesized via a four-step procedure and was used for the formation of intramolecular disulfide bonds in peptides. Transmission electron microscopy (TEM) and chemical mapping results for the Pt(II) intermediates and for SiO₂@TPEA@Pt(IV) show that the silica nanospheres possess a monodisperse spherical structure and contain uniformly-distributed Si, O, C, N, Cl, and Pt. The valence state of Pt on the silica nanospheres was characterized by X-ray photoelectron spectroscopy (XPS). The Pt(IV) loaded on SiO₂@TPEA@Pt(IV) was 0.15 mmol/g, as determined by UV-VIS spectrometry. The formation of intramolecular disulfides in six dithiol-containing peptides of variable lengths by the use of SiO₂@TPEA@Pt(IV) was investigated, and the relative oxidation yields were determined by high-performance liquid chromatography (HPLC). In addition, peptide 1 (Ac-CPFC-NH₂) was utilized to study the reusability of SiO₂@TPEA@Pt(IV). No significant decrease in the relative oxidation yield was observed after ten reaction cycles. Moreover, the structure of SiO₂@TPEA@Pt(IV) after being used for ten cycles was determined to be similar to its initial one, demonstrating the cycling stability of the complex.

H2 Formation on Cosmic Grain Siliceous Surfaces Grafted with Fe+ : A Silsesquioxanes-Based Computational Model

Cosmic siliceous dust grains are involved in the synthesis of H₂ in the inter-stellar medium. In this work, the dust grain siliceous surface is represented by a hydrogen Fe-metalla-silsesquioxane model of general formula: [Fe(H₇ Si₇ O_12-n )(OH)_n ]⁺ (n=0,1,2) where Fe⁺ behaves like a single-site heterogeneous catalyst grafted on a siliceous surface synthesizing H₂ from H. A computational analysis is performed using two levels of theory (B3LYP-D3BJ and MP2-F12) to quantify the thermodynamic driving force of the reaction: [Fe-T7H₇ ]⁺ +4H→[Fe-T7H₇ (OH)₂ ]⁺ +H₂ . The general outcomes are: 1) H₂ synthesis is thermodynamically strongly favored; 2) Fe-H / Fe-H₂ barrier-less formation potential; 3) chemisorbed H-Fe leads to facile H₂ synthesis at 20≤T≤100 K; 4) relative spin energetics and thermodynamic quantities between the B3LYP-D3BJ and MP2-F12 levels of theory are in qualitative agreement. The metalla-silsesquioxane model shows how Fe⁺ fixed on a siliceous surface can potentially catalyze H₂ formation in space.

Catalytic hydrogenation of liquid alkenes with a silica-grafted hydride pincer iridium(iii) complex: support for a heterogeneous mechanism

The silica-grafted Ir(iii) hydride complex [IrH(O–SBA-15)(POCOP)], prepared by treating [IrH₂(O–SBA-15)] with SBA-15 (mesoporous silica), hydrogenates liquid alkenes at room temperature and under 1 atm H₂ without leaching into solution.

Silica-grafted 16-electron hydride pincer complexes of iridium(III) and their soluble analogues: synthesis and reactivity with CO

The dihydride complexes [IrH2(POCOP)] (1a) and [IrH2(PCP)] (1b) (POCOP = 1,3-bis((di-tert-butylphosphino)oxy)benzene; PCP = 1,3-bis((di-tert-butylphosphino)methyl)benzene) react with the surface silanols of mesoporous amorphous silica (SBA-15) to give H2 and the silica-grafted, 16-electron iridium(III) monohydride species [IrH(O-SBA-15)(pincer)] (2a and 2b). These materials contain a single iridium(III) species, that is a highly dispersed, coordinatively unsaturated siloxo hydride complex, as indicated by solid-state spectroscopic data. The siloxo complexes [IrH((i)Bu-POSS)(POCOP)] (3a) and [IrH((i)Bu-POSS)(PCP)] (3b) ((i)Bu-POSS = OSi8O12(i)Bu7) were prepared as soluble analogues of 2a and 2b to support their spectroscopic characterization. The coordinatively unsaturated, 16-electron species 2a and 2b react with CO to give the six-coordinate iridium(III) adducts [IrH(O-SBA-15)(CO)(POCOP)] (7a) and [IrH(O-SBA-15)(CO)(PCP)] (7b). Due to dissimilar electronic properties of the pincer ligands, 7a undergoes reductive elimination of the silanol forming the Ir(I) complex [Ir(CO)(POCOP)] (8a), whereas 7b is stable in oxidation state of III. The homogeneous siloxo carbonyl complexes [IrH((i)Bu-POSS)(CO)(POCOP)] (9a), [IrH((i)Bu-POSS)(CO)(PCP)] (9b), and [IrH(OSiMe3)(CO)(POCOP)] (11a) were prepared to substantiate the reactivity and the characterization of the silica grafted species.