Enhancing Stability of Surface Au under Oxidizing Conditions through Reduced Bulk Au Content

Contrary to the common assumption that a higher bulk content of precious metals facilitates the preservation of more surface noble metal by serving as a reservoir for surface enrichment, we demonstrate that a lower bulk content of Au results in a more stable arrangement of Au atoms at the surface of Cu-Au nanoparticles when exposed to an O2 atmosphere. Using ambient pressure X-ray photoelectron spectroscopy, we investigate the surface segregation and oxidation behavior of Cu-Au nanoparticles across various compositions. Our results reveal that in Au-rich nanoparticles exposed to an H2 atmosphere, surface segregation prompts the formation of a continuous Au-enriched shell, which subsequently oxidizes into a complete CuOx shell upon transitioning to an O2 atmosphere. Conversely, in Au-poor nanoparticles during H2 treatment, segregation results in the emergence of Au clusters embedded within the surface layer, persisting upon exposure to O2. This unexpected phenomenon shows that reducing the bulk content of precious metals can enhance the surface stability of noble atoms under oxidizing conditions, as further demonstrated by comparing the catalytic performance of Cu-Au nanoparticles with varying Au bulk contents in CO oxidation.

Formation of Pt-Based Alloy Nanoparticles Assisted by Molybdenum Hexacarbonyl

We report on an optimized, scalable solution-phase synthetic procedure for the fabrication of fine-tuned monodisperse nanostructures (Pt(NiCo), PtNi and PtCo). The influence of different solute metal precursors and surfactants on the morphological evolution of homogeneous alloy nanoparticles (NPs) has been investigated. Molybdenum hexacarbonyl (Mo(CO)₆) was used as the reductant. We demonstrate that this solution-based strategy results in uniform-sized NPs, the morphology of which can be manipulated by appropriate selection of surfactants and solute metal precursors. Co-surfactants (oleylamine, OAm, and hexadecylamine, HDA) enabled the development of a variety of high-index faceted NP morphologies with varying degrees of curvatures while pure OAm selectively produced octahedral NP morphologies. This Mo(CO)₆-based synthetic protocol offers new avenues for the fabrication of multi-structured alloy NPs as high-performance electrocatalysts.

Nanometal Thermocatalysts: Transformations, Deactivation, and Mitigation

Nanometals have been proven to be efficient thermocatalysts in the last decades. Their enhanced catalytic activity and tunable functionalities make them intriguing candidates for a wide range of catalytic applications, such as gaseous reactions and compound synthesis/decomposition. On the other hand, the enhanced specific surface energy and reactivity of nanometals can lead to configuration transformation and thus catalytic deactivation during the synthesis and catalysis, which largely undermines the activity and service time, thereby calling for urgent research effort to understand the deactivating mechanisms and develop efficient mitigating methods. Herein, the recent progress in understanding the configuration transformation-induced catalytic deactivation within nanometals is reviewed. The major pathways of configuration transformations, and their kinetics controlled by the environmental factors are presented. The approaches toward mitigating the transformation-induced deactivation are also presented. Finally, a perspective on the future academic approaches toward in-depth understanding of the kinetics of the deactivation of nanometals is proposed.

Topographical and compositional engineering of core-shell Ni@Pt ORR electro-catalysts

Complex faceted geometries and compositional anisotropy in alloy nanoparticles (NPs) can enhance catalytic performance. We report on the preparation of binary PtNi NPs via a co-thermolytic approach in which we optimize the synthesis variables, which results in significantly improved catalytic performance. We used scanning transmission electron microscopy to characterise the range of morphologies produced, which included spherical and concave cuboidal core–shell structures. Electrocatalytic activity was evaluated using a rotating disc electrode (1600 rpm) in 0.1 M HClO₄; the electrocatalytic performance of these Ni@Pt NPs showed significant (∼11-fold) improvement compared to a commercial Pt/C catalyst. Extended cycling revealed that electrochemical surface area was retained by cuboidal PtNi NPs post 5000 electrochemical cycles (0.05–1.00 V, vs. SHE). This is attributed to the enclosure of Ni atoms by a thick Pt shell, thus limiting Ni dissolution from the alloy structures. The novel synthetic strategy presented here results in a high yield of Ni@Pt NPs which show excellent electro-catalytic activity and useful durability.

Complex faceted geometries and compositional anisotropy in alloy nanoparticles (NPs) can enhance catalytic performance.

Organic template-based ZnO embedded Mn3O4 nanoparticles: synthesis and evaluation of their electrochemical properties towards clean energy generation

To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts. In this work, a natural organic agent has been used to synthesize nano-structured ZnO/Mn₃O₄ with high surface area and enhanced electrocatalytic performance. Upon pre-annealing treatment, mixed metal oxide precipitates are formed due to the complex formation between a metal oxide and organic extract. The thermally annealed mixed oxide ZnO/Mn₃O₄ was characterized by XRD diffractometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). Gas chromatography-mass spectrometry (GC-MS) identified methyldecylamine as a major stabilizing agent of the synthesized nanomaterial. Using a Tauc plot, the calculated band energy for the synthesized ZnO/Mn₃O₄ mixed metal oxide was 1.65 eV. Moreover, we have demonstrated the effects of incorporated organic compounds on the surface chemistry, morphology and electrochemical behavior of ZnO/Mn₃O₄. The phyto-functionalized ZnO/Mn₃O₄ was deposited on Ni-foam for electrocatalytic studies. The fabricated electrode revealed good performance with low over-potential and Tafel slope, suggesting it to be suitable as a potential catalyst for water splitting application, in particular for the oxygen evolution reaction (OER). The overall findings of the current study provide a cost-effective and efficient organic template for functionalization and sustainable fabrication of ZnO/Mn₃O₄ nanomaterial for application as an electrocatalyst.

To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts.

Atomically Tailored Gold Nanoclusters for Catalytic Application

Recent advances in the synthetic chemistry of atomically precise metal nanoclusters (NCs) have significantly broadened the accessible sizes and structures. Such particles are well defined and have intriguing properties, thus, they are attractive for catalysis. Especially, those NCs with identical size but different core (or surface) structure provide unique opportunities that allow the specific role of the core and the surface to be mapped out without complication by the size effect. Herein, we summarize recent work with isomeric Au_n NCs protected by ligands and isostructural NCs but with different surface ligands. The highlighted work includes catalysis by spherical and rod-shaped Au₂₅ (with different ligands), quasi-isomeric Au₂₈ (SR)₂₀ with different R groups, structural isomers of Au₃₈ (SR)₂₄ (with identical R) and Au₃₈ S₂ (SR)₂₀ with body-centred cubic (bcc) structure, and isostructural [Au₃₈ L₂₀ (PPh₃ )₄ ]²⁺ (different L). These isomeric and/or isostructural NCs have provided valuable insights into the respective roles of the kernel, surface staples, and the type of ligands on catalysis. Future studies will lead to fundamental advances and development of tailor-made catalysts.

Revealing the Formation Mechanism of Alloyed Pd-Ru Nanoparticles: A Conversion Measurement Approach Utilizing a Microflow Reactor

The synthesis of alloyed nanoparticles has been studied extensively; however, the formation mechanisms involved remain unclear. Here, we reveal the detailed formation mechanism of alloyed nanoparticles in a Pd-Ru system, using a semibatch polyol method in which the simultaneous rapid reduction of both precursors was assumed to be the critical mechanism. We employed a microflow reactor to realize rapid heating and cooling. A significant difference in the reaction rate between the two precursors was observed. Pd was reduced within seconds, but the reduction of Ru was 2 orders of magnitude slower than that of Pd and was not as rapid as previously assumed. Further investigation of the semibatch method was performed to trace changes in the particle sizes and composition. Through quantitative and multilateral evidence, we concluded that the formation of low-crystallinity seeds, followed by solid-state diffusion, is the governing mechanism for the formation of alloyed Pd-Ru nanoparticles.

Band Edge Optical Excitation of Pyridine-Adsorbed CuAg Nanoparticles

Understanding the structure-property relationship of multielement nanoparticles is vital for developing novel nanodevices. In the present paper, via a combination of a basin hopping global sampling method, a symmetry-orbit shell optimization technique, and density functional theory reoptimizations, we determine the energetically most stable CuAg face-centered cubic nanoparticles. The calculated structures show a clear tendency toward Cu_coreAg_shell chemical ordering by populating the more cohesive Cu in the core region and of Ag in the shell region. Further, using time-dependent density functional theory (TDDFT) calculations, we analyze the band edge optical excitations of the nanoparticles with pyridine molecule on top. With the help of charge difference density plots, we found dramatic modifications in the electron density distribution of the nanoparticles. We believe that the present theoretical findings will be useful for the development of novel nanosensors.

Synthesis of Highly Efficient Bifunctional Ag/Co3O4 Catalyst for Oxygen Reduction and Oxygen Evolution Reactions in Alkaline Medium

Ag/Co3O4 catalysts using three different modes of solution combustion synthesis were developed and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy to identify crystallite size, oxidation state, composition, and morphology. Cyclic voltammetry and linear sweep voltammetry measurements for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) confirm the bifunctionality of the electrocatalysts. The electrochemical evaluation indicates that a synergic effect between Ag and Co enhances the activity through the fast breaking of O-O bond in the molecular oxygen to enhance the reduction mechanism. The high content of cobalt (Co) in the catalyst Ag/Co3O4-12, synthesized by second wave combustion, improves the activity for ORR, and the reaction mechanism follows a 3.9 number of electron transfer in overall reaction. The kinetic and limiting current densities of Ag/Co3O4-12 are maximum when compared to those of other Ag/Co3O4 catalysts and are very close to commercial Pt/C. Moreover, the maximum current density of OER for Ag/Co3O4-12 makes it a promising candidate for various bifunctional electrocatalytic applications such as fuel cells and metal-air batteries.

Monitoring the formation of PtNi nanoalloys supported on hollow graphitic spheres using in situ pair distribution function analysis

This article aims to address the formation and the structural disordering/ordering phenomena of PtNi nanoalloys supported on hollow graphitic spheres (HGSs) using pair distribution function (PDF) analysis under ex situ/in situ data collection conditions. Starting from small nanoparticles (10-15 Å in diameter) embedded in HGSs, structural changes were monitored during stepwise heating and cooling of the sample using in situ PDF analysis. In order to evaluate the conventional synthesis route for the production of PtNi nanoalloys supported on HGSs, ex situ PDF experiments were performed before and after heat treatment in a furnace. The studies demonstrate that the local structure of the in situ synthesised PtNi nanoalloy differs from its ex situ synthesised counterpart. A partially ordered PtNi nanoalloy was obtained during the stepwise in situ cooling of the precursor, whereas the conventional ex situ synthesis route did not lead to the formation of an ordered crystal structure. In this study we could show that rapid heating and cooling results in a disordered PtNi alloy whereas slow heating and cooling leads to disorder-order transitions in PtNi.

Generalized nano-thermodynamic model for capturing size-dependent surface segregation in multi-metal alloy nanoparticles

Multi-metal alloy nanoparticles (NPs) offer new avenues for exploration and design of nanoscale-properties, e.g., catalytic, electronic and optical properties, by virtue of their tunable composition. A method that can aid such exploration by accurately predicting the size-, shape- and composition-dependent elemental distribution associated with nanomaterials is crucially missing. A nano-thermodynamic model based on distribution coefficients Δ is introduced to fill this gap. Δ is employed to predict surface segregation in NPs as a function of the NP size and composition. Interestingly, we find Δ to be independent of size for NPs beyond 2 nm. This key finding motivates the construction of thermodynamic tables for distribution coefficients using segregation observed with one or more NP sizes. The tables can enable accurate prediction of phase diagrams for nanomaterials across a wide-range of sizes. Key concepts of this new theory are demonstrated with Au–Pt–Pd, Ag–Au–Pd and Ni–Pt–Pd, which are found to exhibit complex size-dependent segregation behavior for 2–6 nm NPs and relatively weaker size-dependence beyond 6 nm. Numerically well-converged values of Δ are calculated for small NPs using Monte Carlo simulations in the canonical ensemble. Simulations are based on an embedded atom method (EAM) potential for metal alloys.

Nano-thermodynamic model captures thermodynamic preference of metal species for different regions of a nanoparticle while accounting for size effects.

Nanoscale Cobalt-Manganese Oxide Catalyst Supported on Shape-Controlled Cerium Oxide: Effect of Nanointerface Configuration on Structural, Redox, and Catalytic Properties

Understanding the role of nanointerface structures in supported bimetallic nanoparticles is vital for the rational design of novel high-performance catalysts. This study reports the synthesis, characterization, and the catalytic application of Co-Mn oxide nanoparticles supported on CeO₂ nanocubes with the specific aim of investigating the effect of nanointerfaces in tuning structure-activity properties. High-resolution transmission electron microscopy analysis reveals the formation of different types of Co-Mn nanoalloys with a range of 6 ± 0.5 to 14 ± 0.5 nm on the surface of CeO₂ nanocubes, which are in the range of 15 ± 1.5 to 25 ± 1.5 nm. High concentration of Ce³⁺ species are found in Co-Mn/CeO₂ (23.34%) compared with that in Mn/CeO₂ (21.41%), Co/CeO₂ (15.63%), and CeO₂ (11.06%), as evidenced by X-ray photoelectron spectroscopy (XPS) analysis. Nanoscale electron energy loss spectroscopy analysis in combination with XPS studies shows the transformation of Co²⁺ to Co³⁺ and simultaneously Mn^4+/3+ to Mn²⁺. The Co-Mn/CeO₂ catalyst exhibits the best performance in solvent-free oxidation of benzylamine (89.7% benzylamine conversion) compared with the Co/CeO₂ (29.2% benzylamine conversion) and Mn/CeO₂ (82.6% benzylamine conversion) catalysts for 3 h at 120 °C using air as the oxidant. Irrespective of the catalysts employed, a high selectivity toward the dibenzylimine product (97-98%) was found compared with the benzonitrile product (2-3%). The interplay of redox chemistry of Mn and Co at the nanointerface sites between Co-Mn nanoparticles and CeO₂ nanocubes as well as the abundant structural defects in cerium oxide plays a key role in the efficiency of the Co-Mn/CeO₂ catalyst for the aerobic oxidation of benzylamine.

Carbon-coated nanoparticle superlattices for energy applications

Nanoparticle (NP) superlattices represent a unique material architecture for energy conversion and storage. Recent reports on carbon-coated NP superlattices have shown exciting electrochemical properties attributed to their rationally designed compositions and structures, fast electron transport, short diffusion length, and abundant reactive sites via enhanced coupling between close-packed NPs, which are distinctive from their isolated or disordered NP or bulk counterparts. In this minireview, we summarize the recent developments of highly-ordered and interconnected carbon-coated NP superlattices featuring high surface area, tailorable and uniform doping, high conductivity, and structure stability. We then introduce the precisely-engineered NP superlattices by tuning/studying specific aspects, including intermetallic structures, long-range ordering control, and carbon coating methods. In addition, these carbon-coated NP superlattices exhibit promising characteristics in energy-oriented applications, in particular, in the fields of lithium-ion batteries, fuel cells, and electrocatalysis. Finally, the challenges and perspectives are discussed to further explore the carbon-coated NP superlattices for optimized electrochemical performances.

Structural dynamics and activity of nanocatalysts inside fuel cells by in operando atomic pair distribution studies

Here we present the results from a study aimed at clarifying the relationship between the atomic structure and activity of nanocatalysts for chemical reactions driving fuel cells, such as the oxygen reduction reaction (ORR). In particular, using in operando high-energy X-ray diffraction (HE-XRD) we tracked the evolution of the atomic structure and activity of noble metal-transition metal (NM-TM) nanocatalysts for ORR as they function at the cathode of a fully operational proton exchange membrane fuel cell (PEMFC). Experimental HE-XRD data were analysed in terms of atomic pair distribution functions (PDFs) and compared to the current output of the PEMFC, which was also recorded during the experiments. The comparison revealed that under actual operating conditions, NM-TM nanocatalysts can undergo structural changes that differ significantly in both length-scale and dynamics and so can suffer losses in their ORR activity that differ significantly in both character and magnitude. Therefore we argue that strategies for reducing ORR activity losses should implement steps for achieving control not only over the length but also over the time-scale of the structural changes of NM-TM NPs that indeed occur during PEMFC operation. Moreover, we demonstrate how such a control can be achieved and thereby the performance of PEMFCs improved considerably. Last but not least, we argue that the unique capabilities of in operando HE-XRD coupled to atomic PDF analysis to characterize active nanocatalysts inside operating fuel cells both in a time-resolved manner and with atomic level resolution, i.e. in 4D, can serve well the ongoing search for nanocatalysts that deliver more with less platinum.

Flower-like RuCu nanodendrites as catalysts for hydrogenation of p-nitrophenol with β-cyclodextrin as promoters

Flower-like ruthenium-copper (RuCu) nanodendrites were readily synthesized by RuCl3·xH2O and CuCl with oleylamine as the reducing agent, stabilizer and solvent. The nanodendrites contained various small particles and demonstrated efficient catalytic ability in the hydrogenation of p-nitrophenol as a model reaction. Notably, by adding β-cyclodextrin, the reaction rate can be greatly enhanced.

Activated nanostructured bimetallic catalysts for C–C coupling reactions: recent progress

This minireview highlights the recent progress made in the last decade towards the development of activated bimetallic alloy nanoparticle catalysts for C–C coupling reactions, including asymmetric C–C bond coupling reactions.

Effect of the thermal treatment temperature of RuNi bimetallic nanocatalysts on their catalytic performance for benzene hydrogenation

The thermal treatment temperature of bimetallic nanocatalysts plays an important role in determining their catalytic performance.

One-pot synthesis of Pt catalysts based on layered double hydroxides: an application in propane dehydrogenation

One-pot synthesis of Mg,Al,Pt,In–layered double hydroxides (LDHs) yields well-dispersed Pt–In NPs. These nanocatalysts display high propane dehydrogenation activity and display the potential for deriving a broad class of Pt catalysts from LDHs.

Catalytic activity of bimetallic catalysts highly sensitive to the atomic composition and phase structure at the nanoscale

The ability to determine the atomic arrangement in nanoalloy catalysts and reveal the detailed structural features responsible for the catalytically active sites is essential for understanding the correlation between the atomic structure and catalytic properties, enabling the preparation of efficient nanoalloy catalysts by design. Herein we describe a study of CO oxidation over PdCu nanoalloy catalysts focusing on gaining insights into the correlation between the atomic structures and catalytic activity of nanoalloys. PdCu nanoalloys of different bimetallic compositions are synthesized as a model system and are activated by a controlled thermochemical treatment for assessing their catalytic activity. The results show that the catalytic synergy of Pd and Cu species evolves with both the bimetallic nanoalloy composition and temperature of the thermochemical treatment reaching a maximum at a Pd : Cu ratio close to 50 : 50. The nanoalloys are characterized structurally by ex situ and in situ synchrotron X-ray diffraction, including atomic pair distribution function analysis. The structural data show that, depending on the bimetallic composition and treatment temperature, PdCu nanoalloys adopt two different structure types. One features a chemically ordered, body centered cubic (B2) type alloy consisting of two interpenetrating simple cubic lattices, each occupied with Pd or Cu species alone, and the other structure type features a chemically disordered, face-centered cubic (fcc) type of alloy wherein Pd and Cu species are intermixed at random. The catalytic activity for CO oxidation is strongly influenced by the structural features. In particular, it is revealed that the prevalence of chemical disorder in nanoalloys with a Pd : Cu ratio close to 50 : 50 makes them superior catalysts for CO oxidation in comparison with the same nanoalloys of other bimetallic compositions. However, the catalytic synergy can be diminished if the Pd50Cu50 nanoalloys undergo phase segregation into distinct chemically-ordered (B2-type) and disordered (fcc-type) domains. This finding is significant since it provides a rational basis for streamlining the design and preparation of Pd-based nanoalloy catalysts in terms of atomic structure and phase state.

Key parameters governing metallic nanoparticle electrocatalysis

Engineering metallic nanoparticles constitutes a powerful route to design next-generation electrocatalysts to be used in future energy and environmental industries. In this mini review, we cover recent advances in metallic nanoparticle electrocatalysis, with a focus on understanding how the parameters such as particle sizes, crystalline structures, shapes, compositions, nanoscale alloying and interfaces influence their electrocatalytic activity and selectivity. In addition, this review highlights viable approaches for fabrication of nanoparticle-based electrocatalytic electrodes and discusses their influences on the overall catalytic performances. Finally, we discuss the opportunities and challenges ahead to program these key parameters to achieve highly durable designer electrocatalysts in future.

Ultrafine Nanoparticle-Supported Ru Nanoclusters with Ultrahigh Catalytic Activity

The design of an ideal heterogeneous catalyst for hydrogenation reaction is to impart the catalyst with synergetic surface sites active cooperatively toward different reaction species. Herein a new strategy is presented for the creation of such a catalyst with dual active sites by decorating metal and metal oxide nanoparticles with ultrafine nanoclusters at atomic level. This strategy is exemplified by the design and synthesis of Ru nanoclusters supported on Ni/NiO nanoparticles. This Ru-nanocluster/Ni/NiO-nanoparticle catalyst is shown to exhibit ultrahigh catalytic activity for benzene hydrogenation reaction, which is 55 times higher than Ru-Ni alloy or Ru on Ni catalysts. The nanoclusters-on-nanoparticles are characterized by high-resolution transmission electron microscope, Cs-corrected high angle annular dark field-scanning transmission electron microscopy, elemental mapping, high-sensitivity low-energy ion scattering, and X-ray absorption spectra. The atomic-scale nanocluster-nanoparticle structural characteristics constitute the basis for creating the catalytic synergy of the surface sites, where Ru provides hydrogen adsorption and dissociation site, Ni acts as a "bridge" for transferring H species to benzene adsorbed and activated at NiO site, which has significant implications to multifunctional nanocatalysts design for wide ranges of catalytic reactions.

AuRu/AC as an effective catalyst for hydrogenation reactions

AuRu bimetallic catalysts have been prepared by sequential deposition of Au on Ru or vice versa obtaining different nanostructures: when Ru has been deposited on Au, a Au_core–Ru_shell has been observed, whereas the deposition of Au on Ru leads to a bimetallic phase with Ru enrichment on the surface.

Perspective on CO oxidation over Pd-based catalysts

CO oxidation is one of the most extensively investigated reactions in the field of heterogeneous catalysis because of its importance in both environmental protection and fundamental studies.