Organocatalytic Dehydration of Fructose-Based Carbohydrates into 5-Hydroxymethylfurfural in the Presence of a Neutral Inner Salt

A series of organic sulfonate inner salts, viz., aprotic imidazolium- and pyridinium-based zwitterions bearing sulfonate groups (-SO₃^-), were synthesized for the catalytic conversion of fructose-based carbohydrates into 5-hydroxymethylfurfural (HMF). The dramatic cooperation of both the cation and anion of inner salts played a crucial role in the HMF formation. The inner salts have excellent solvent compatibility, and 4-(pyridinium)butane sulfonate (PyBS) affords the highest catalytic activity with 88.2 and 95.1% HMF yields at almost full conversion of fructose in low-boiling-point protic solvent isopropanol (i-PrOH) and aprotic solvent dimethyl sulfoxide (DMSO), respectively. The substrate tolerance of aprotic inner salt was also studied through changing the substrate type, demonstrating its excellent specificity for catalytic valorization of fructose-moiety-containing C6 sugars, such as sucrose and inulin. Meanwhile, the neutral inner salt is structurally stable and reusable; after being recycled four times, the catalyst showed no appreciable loss of its catalytic activity. The plausible mechanism has been elucidated based on the dramatic cooperative effect of both the cation and sulfonate anion of inner salts. The noncorrosive, nonvolatile, and generally nonhazardous aprotic inner salt used in this study will benefit many biochemical-related applications.

Chemical hydrolysis of hemicellulose from sugarcane bagasse. A comparison between the classical sulfuric acid method with the acidic ionic liquid 1-ethyl-3-methylimidazolium hydrogen sulfate

Dilute sulfuric acid and acidic ionic liquids are pretreatment methods used to selectively hydrolyze hemicellulose from lignocellulosic biomasses. In this work, a comparison between these techniques is carried out by treating sugarcane bagasse both with 1-ethyl-3-methylimidazolium hydrogen sulfate at different ionic-liquid and water contents and with H 2 SO 4 at the same conditions and equivalent ionic liquid molar contents. Results from the use of ionic liquid showed that it was possible to tune the biomass treatment either to achieve high hemicellulose hydrolysis yields of 72.5 mol% to very low furan and glucose co-production, or to obtain furfural at moderate yields of 18.7 mol% under conditions of low water concentration. In comparison to the use of ionic liquid, sulfuric acid pretreatment increased hemicellulose hydrolysis yields by 17%, but the 8.6 mol% furfural yield was also higher, and these yields were obtained at high water concentration conditions. Besides, no such tuning ability of the biomass treatment conditions can be made.

Intriguing role of novel ionic liquids in stochastic degradation of chitosan

Green technique for hydrolysis of chitosan was developed using novel Brønsted Acidic Ionic Liquids (BAILs) as homogenous reusable catalysts. Efficiency of BAILs in controlling stochastic and irregular breakdown of chitosan was compared with that of mineral acids. Structural elucidation of the novel BAILs was performed using H¹-NMR evaluation and supplemented using mass spectroscopy. Additionally, thermal characterization was conducted using TGA-DTA analysis, while acidity was estimated by deriving the Hammet acidity function. BAILs investigated in this work enabled consistent production of LMWCS variants, with minimum formation of residual impurities. Around 80 % reduction in molecular weight was noted as compared to original under extreme conditions employed. Further, Box-Behnken Design (BBD) was implemented to optimize effect of processing parameters for conversion of chitosan to low molecular weight congeners.

Anionic structural effect on the dissolution of arabinoxylan-rich hemicellulose in 1-butyl-3-methylimidazolium carboxylate-based ionic liquids

The exploration of a highly efficient and environment-friendly solvent for dissolving hemicellulose is significant. In this study, 1-butyl-3-methylimidazolium carboxylate ([Bmim]carboxylate)-based ionic liquids (ILs), including [Bmim]formate, [Bmim]acetate, [Bmim]propionate, and [Bmim]butyrate, were used as solvents to dissolve arabinoxylan-rich hemicellulose from bamboo. The hemicellulose solubility in the ILs was determined as a function of temperature. The interaction between the hemicellulose and the ILs was evaluated by using ¹H and ¹³C NMR techniques. The hemicelluloses regenerated from the saturated IL solutions were characterized. Results showed that the temperature and structure of carboxylate anions deeply affected the hemicellulose solubility. The carboxylate anion played a more important role than the imidazolium cation in hemicellulose dissolution. The hydrogen bond that formed between the ILs and the hydroxyl groups at the XC2 position of xylopyranose units of hemicellulose was stronger than that between the ILs and the hydroxyl groups at XC3 position of xylopyranose units. The hydrogen bond strength between the hemicellulose and the ILs was affected by the alkyl chain of the carboxylate anion and the hemicellulose concentration. The disruption of the inter- and intra-molecular hydrogen bonds in hemicellulose by the ILs was responsible for the hemicellulose dissolution. The main chain of hemicellulose remained nearly unchanged during the dissolution process.

The exploration of a highly efficient and environment-friendly solvent for dissolving hemicellulose is significant.

Oxidation of biomass-derived furans to maleic acid over nitrogen-doped carbon catalysts under acid-free conditions

We report an acid-free effective furfural-to-MA conversion system using a nitrogen-doped carbon catalyst and H₂O₂ oxidant.

Efficient liquid-phase hydrogenolysis of a lignin model compound (benzyl phenyl ether) using a Ni/carbon catalyst

Efficient liquid-phase hydrogenolysis of benzyl phenyl ether using Ni/CB in an EtOH/H₂O co-solvent system.

Direct Production of Furfural in One-pot Fashion from Raw Biomass Using Brønsted Acidic Ionic Liquids

The conversion of raw biomass into C5-sugars and furfural was demonstrated with the one-pot method using Brønsted acidic ionic liquids (BAILs) without any mineral acids or metal halides. Various BAILs were synthesized and characterized using NMR, FT-IR, TGA, and CHNS microanalysis and were used as the catalyst for raw biomass conversion. The remarkably high yield (i.e. 88%) of C5 sugars from bagasse can be obtained using 1-methyl-3(3-sulfopropyl)-imidazolium hydrogen sulfate ([C₃SO₃HMIM][HSO₄]) BAIL catalyst in a water medium. Similarly, the [C₃SO₃HMIM][HSO₄] BAIL also converts the bagasse into furfural with very high yield (73%) in one-pot method using a water/toluene biphasic solvent system.

Brønsted acidic ionic liquid-promoted direct C3-acylation of N-unsubstituted indoles with acid anhydrides under microwave irradiation

A green and efficient method for the synthesis of 3-acylindoles using a Brønsted acidic ionic liquid under microwave irradiation has been developed.

Effects of cations, anions and H+ concentration of acidic ionic liquids on the valorization of polysaccharides into furfural

The valorization of hemicellulose into valuable chemicals, such as C5 sugars and furfural, in a one-pot fashion.

Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids

Innovative valorization of naturally abundant and renewable lignocellulosic biomass is of great importance in the pursuit of a sustainable future and biobased economy. Ionic liquids (ILs) as an important kind of green solvents and functional fluids have attracted significant attention for the catalytic transformation of lignocellulosic feedstocks into a diverse range of products. Taking advantage of some unique properties of ILs with different functions, the catalytic transformation processes can be carried out more efficiently and potentially with lower environmental impacts. Also, a new product portfolio may be derived from catalytic systems with ILs as media. This review focuses on the catalytic chemical conversion of lignocellulose and its primary ingredients (i.e., cellulose, hemicellulose, and lignin) into value-added chemicals and fuel products using ILs as the reaction media. An outlook is provided at the end of this review to highlight the challenges and opportunities associated with this interesting and important area.

Current Pretreatment Technologies for the Development of Cellulosic Ethanol and Biorefineries

Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids).

Conversion of concentrated sugar solutions into 5-hydroxymethyl furfural and furfural using Brönsted acidic ionic liquids

Using recyclable and green ionic liquids in catalytic amounts, renewable sugars are dehydrated into furans with high yields.