Isomorphous substitution of divalent metal ions in layered double hydroxides through a soft chemical hydrothermal reaction

The Effect of Lithium Ion Leaching from Calcined Li-Al Hydrotalcite on the Rapid Removal of Ni2+/Cu2+ from Contaminated Aqueous Solutions

A layered double hydroxide (LDH) calcined-framework adsorbent was investigated for the rapid removal of heavy metal cations from plating wastewater. Li-Al-CO₃ LDH was synthesized on an aluminum lathe waste frame surface to prepare the sorbent. The calcination treatment modified the LDH surface properties, such as the hydrophilicity and the surface pH. The change in surface functional groups and the leaching of lithium ions affected the surface properties and the adsorption capacity of the heavy metal cations. A zeta potential analysis confirmed that the 400 °C calcination changed the LDH surface from positively charged (+10 mV) to negatively charged (-17 mV). This negatively charged surface contributed to the sorbent instantly bonding with heavy metal cations in large quantities, as occurs during contact with wastewater. The adsorption isotherms could be fitted using the Freundlich model. The pseudo-second-order model and the rate-controlled liquid-film diffusion model successfully simulated the adsorption kinetics, suggesting that the critical adsorption step was a heterogeneous surface reaction. This study also confirmed that the recovered nickel and/or copper species could be converted into supported metal nanoparticles with a high-temperature hydrogen reduction treatment, which could be reused as catalysts.

Surface modification of two-dimensional layered double hydroxide nanoparticles with biopolymers for biomedical applications

Layered double hydroxides (LDHs) are appealing nanomaterials for (bio)medical applications and their potential is threefold. One can gain advantage of the structure of LDH frame (i.e., layered morphology), anion exchanging property towards drugs with acidic character and tendency for facile surface modification with biopolymers. This review focuses on the third aspect, as it is necessary to evaluate the advantages of polymer adsorption on LDH surfaces. Beside the short discussion on fundamental and structural features of LDHs, LDH-biopolymer interactions will be classified in terms of the effect on the colloidal stability of the dispersions. Thereafter, an overview on the biocompatibility and biomedical applications of LDH-biopolymer composite materials will be given. Finally, the advances made in the field will be summarized and future research directions will be suggested.

A Peritumorally Injected Immunomodulating Adjuvant Elicits Robust and Safe Metalloimmunotherapy against Solid Tumors

Clinical immunotherapy of solid tumors elicits durable responses only in a minority of patients, largely due to the highly immunosuppressive tumor microenvironment (TME). Although rational combinations of vaccine adjuvants with inflammatory cytokines or immune agonists that relieve immunosuppression represent an appealing therapeutic strategy against solid tumors, there are unavoidable nonspecific toxicities due to the pleiotropy of cytokines and undesired activation of off-target cells. Herein, a Zn²⁺ doped layered double hydroxide (Zn-LDH) based immunomodulating adjuvant, which not only relieves immunosuppression but also elicits robust antitumor immunity, is reported. Peritumorally injected Zn-LDH sustainably neutralizes acidic TME and releases abundant Zn²⁺ , promoting a pro-inflammatory network composed of M1-tumor-associated macrophages, cytotoxic T cells, and natural-killer cells. Moreover, the Zn-LDH internalized by tumor cells effectively disrupts endo-/lysosomes to block autophagy and induces mitochondrial damage, and the released Zn²⁺ activates the cGas-STING signaling pathway to induce immunogenic cell death, which further promotes the release of tumor-associated antigens to induce antigen-specific cytotoxic T lymphocytes. Unprecedentedly, merely injection of Zn-LDH adjuvant, without using any cytotoxic inflammatory cytokines or immune agonists, significantly inhibits the growth, recurrence, and metastasis of solid tumors in mice. This study provides a rational bottom-up design of potent adjuvant for cancer metalloimmunotherapy against solid tumors.

Topology dependent modification of layered double hydroxide for therapeutic and diagnostic platform

Layered double hydroxide is a family of two-dimensional materials with wide range of compositions. Recently, its ability to accommodate various chemical species and biocompatibility have been attracted in the biomedical applications to develop drug delivery system and nanodiagnostics. In this review, we categorized biomedical approaches of layered double hydroxide with respect to the three topologies of, namely, interlayer space, outer surface with particle edge, and the lattice points. There have been extensive researches on the intercalation of drug or tracing to make use of interlayer space of layered double hydroxide for drug stabilization, sustained release, cellular delivery and etc. Outer surface or edge has been utilized to immobilization of large therapeutic moieties and to attach tracing moiety. Lattice points consisting of various metal species could be utilized for the specific metal species like paramagnetic elements or radioisotopes. Based on these topologies in layered double hydroxide, both the synthetic routes and the achieved functionalities in terms of biomedical application will be discussed.

Nanoarchitectured two-dimensional layered double hydroxides-based nanocomposites for biomedical applications

Despite the exceptional physicochemical and morphological characteristics, the pristine layered double hydroxides (LDHs), or two-dimensional (2D) hydrotalcite clays, often suffer from various shortcomings in biomedicine, such as deprived thermal and chemical stabilities, acid-prone degradation, as well as lack of targeting ability, hampering their scale-up and subsequent clinical translation. Accordingly, diverse nanocomposites of LDHs have been fabricated by surface coating of organic species, impregnation of inorganic species, and generation of core-shell architectures, resulting in the complex state-of-the-art architectures. In this article, we initially emphasize various bothering limitations and the chemistry of these pristine LDHs, followed by discussions on the engineering strategies of different LDHs-based nanocomposites. Further, we give a detailed note on diverse LDH nanocomposites and their performance efficacy in various biomedical applications, such as drug delivery, bioimaging, biosensing, tissue engineering and cell patterning, deoxyribonucleic acid (DNA) extraction, as well as photoluminescence, highlighting the influence of various properties of installed supramolecular assemblies on their performance efficacy. In summary, we conclude with interesting perspectives concerning the lessons learned to date and the strategies to be followed to further advance their scale-up processing and applicability in medicine.

Freestanding Binder-Free Electrodes with Nanodisk-Needle-like MnCuCo-LTH and Mn1Fe2S2 Porous Microthorns for High-Performance Quasi-Solid-State Supercapacitors

Transition-metal-based layered triple hydroxides (LTHs) are evolving as potential positrode candidates for high-performance supercapacitors; however, their phase stabilization is still critical. Alongside, the availability of limited negatrodes pushes research toward exploring novel alternatives in order to minimize performance limitation issues in the fabricated supercapacitors. Herein, a facile strategy for stabilizing freestanding MnCuCo-LTH-based positrode possessing intermingled nanodisk-needle-like morphology is reported. Alongside, novel high-surface-area negatrodes based on Mn₁Fe₂S₂ exhibiting porous microthorn-like morphology are also optimized. MnCuCo_LTH and Mn₁Fe₂S₂ exhibit remarkably high specific capacities of ∼494 mAh g^-1 (∼2540 F g^-1) and ∼429 mAh g^-1 (∼1546 F g^-1), respectively, at 1 A g^-1. The fabricated quasi-solid-state supercapacitor equipped with a poly(vinyl alcohol) (PVA)-KOH gel electrolyte displays a high specific capacity of ∼144 mAh g^-1 and a specific capacitance of ∼325 F g^-1 at 1 A g^-1. The ultrahigh energy cum power traits of ∼105 Wh kg^-1 (1 A g^-1) and ∼8370 W kg^-1 (at 10 A g^-1) establish an asymmetric supercapacitor as a high-performance energy storage device. This device shows an appreciably high cycling life with a capacitance retention of ∼93% after 10 000 consecutive cycles, at 10 A g^-1. This approach provides a neoteric foresight for developing high-performance advanced energy storage devices equipped with cheaper and eco-friendly components.

Emerging 2D Nanomaterials for Biomedical Applications

Two-dimensional (2D) nanomaterials are an emerging class of biomaterials with remarkable potential for biomedical applications. The planar topography of these nanomaterials confers unique physical, chemical, electronic and optical properties, making them attractive candidates for therapeutic delivery, biosensing, bioimaging, regenerative medicine, and additive manufacturing strategies. The high surface-to-volume ratio of 2D nanomaterials promotes enhanced interactions with biomolecules and cells. A range of 2D nanomaterials, including transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), layered silicates (nanoclays), 2D metal carbides and nitrides (MXenes), metal-organic framework (MOFs), covalent organic frameworks (COFs) and polymer nanosheets have been investigated for their potential in biomedical applications. Here, we will critically evaluate recent advances of 2D nanomaterial strategies in biomedical engineering and discuss emerging approaches and current limitations associated with these nanomaterials. Due to their unique physical, chemical, and biological properties, this new class of nanomaterials has the potential to become a platform technology in regenerative medicine and other biomedical applications.

Homogeneous Incorporation of Gallium into Layered Double Hydroxide Lattice for Potential Radiodiagnostics: Proof-of-Concept

Trivalent gallium ion was successfully incorporated into chemically well-defined MgAl-layered double hydroxide (LDH) frameworks through postsynthetic hydrothermal treatment. Quantitative analysis with inductively coupled plasma-mass spectroscopy exhibited that Ga³⁺ was first incorporated into LDH through partial dissolution-precipitation at the edge of LDH particle and homogeneously distributed throughout the particle by substitution of Ga³⁺ for Al³⁺ in LDH frame works. The powder X-ray diffraction patterns showed that the Ga³⁺ incorporation did not affect the crystal structure without evolution of unexpected impurities. The morphology and surface property of LDH evaluated by scanning electron microscopy and light scattering showed the preservation of physicochemical properties throughout 24 h of hydrothermal reaction. The distribution of incorporated Ga³⁺ was visualized with energy dispersive spectroscopy-assisted transmission electron microscopy, suggesting the homogeneous location of Ga³⁺ in an LDH particle. The X-ray absorption near-edge structure and extended X-ray absorption fine structure suggested that the Ga moiety was immobilized in LDH from 0.5 h and readily crystallized upon reaction time.

Functional Layered Double Hydroxide Nanohybrids for Biomedical Imaging

Biomedical investigations using layered double hydroxide (LDH) nanoparticles have attracted tremendous attentions due to their advantages such as biocompatibility, variable-chemical compositions, anion-exchange capacity, host-guest interactions, and crystallization-dissolution characters. Bio-imaging becomes more and more important since it allows theranostics to combine therapy and diagnosis, which is a concept of next-generation medicine. Based on the unique features mentioned above, LDHs create novel opportunities for bio-imaging and simultaneous therapy with LDHs-based nanohybrids. This review aims to explore the recent advances in multifunctional LDH nanohybrids ranging from synthesis to practical applications for various bio-imaging with therapeutic functions. Furthermore, their potential both as diagnostic agents and drug delivery carriers will be discussed with the improvement in noninvasive bio-imaging techniques.

Polypropylene/Layered Double Hydroxide Nanocomposites: Influence of LDH Intralayer Metal Constituents on the Properties of Polypropylene

Sonication-assisted delamination of layered double hydroxides (LDHs) resulted in smaller-sized LDH nanoparticles (∼50-200 nm). Such delaminated Co-Al LDH, Zn-Al LDH, and Co-Zn-Al LDH solutions were used for the preparation of highly dispersed isotactic polypropylene (iPP) nanocomposites. Transmission electron microscopy and wide-angle X-ray diffraction results revealed that the LDH nanoparticles were well dispersed within the iPP matrix. The intention of this study is to understand the influence of the intralayer metal composition of LDH on the various properties of iPP/LDH nanocomposites. The sonicated LDH nanoparticles showed a significant increase in the crystallization rate of iPP; however, not much difference in the crystallization rate of iPP was observed in the presence of different types of LDH. The dynamic mechanical analysis results indicated that the storage modulus of iPP was increased significantly with the addition of LDH. The incorporation of different types of LDH showed no influence on the storage modulus of iPP. But considerable differences were observed in the flame retardancy and thermal stability of iPP with the type of LDH used for the preparation of nanocomposites. The thermal stability (50% weight loss temperature (T 0.5)) of the iPP nanocomposite containing three-metal LDH (Co-Zn-Al LDH) is superior to that of the nanocomposites made of two-metal LDH (Co-Al LDH and Zn-Al LDH). Preliminary studies on the flame-retardant properties of iPP/LDH nanocomposites using microscale combustion calorimetry showed that the peak heat release rate was reduced by 39% in the iPP/Co-Zn-Al LDH nanocomposite containing 6 wt % LDH, which is higher than that of the two-metal LDH containing nanocomposites, iPP/Co-Al LDH (24%) and iPP/Zn-Al LDH (31%). These results demonstrated that the nanocomposites prepared using three-metal LDH showed better thermal and flame-retardant properties compared to the nanocomposites prepared using two-metal LDH. This difference might be due to the better char formation capability of three-metal LDH compared to that of two-metal LDH.

Radioisotope Co-57 incorporated layered double hydroxide nanoparticles as a cancer imaging agent

Radioisotope Co-57 substituted LDH were successfully prepared by isomorphous substitution and showed high in vitro cellular uptake and tumor targeting in vivo biodistribution.

Simultaneous removal of nickel and phosphorus from spent electroless nickel plating wastewater via calcined Mg–Al–CO3 hydroxides

This picture shows the different adsorption mechanisms of CLDHs for electroless nickel plating wastewater with low and high ionic concentrations.