C(sp)-H, S-H, and Sn-H Bond Activation with a Cobalt(I) Pincer Complex

This study focuses on the stoichiometric reactions of {2,6-(iPr2PO)2C6H3}Co(PMe3)2 with terminal alkynes, thiols, and tin hydrides as part of an effort to develop catalytic, two-electron processes with cobalt. This specific Co(I) pincer complex proves to be effective for cleaving the C(sp)-H, S-H, and Sn-H bonds to give oxidative addition products with the general formula {2,6-(iPr2PO)2C6H3}CoHX(PMe3) (X = alkynyl, thiolate, and stannyl groups) along with the free PMe3. These reactions typically reach completion when the substituents on acetylene, sulfur, and tin are electron-withdrawing groups (e.g., phenyl, pyridyl, and alkenyl groups). In contrast, alkyl-substituted acetylenes, 1-pentanethiol, and tributyltin hydride are partially converted due to the equilibria with the corresponding oxidative addition products. The Co(I) pincer complex is not a hydrothiolation catalyst but capable of catalyzing the hydrostannation of terminal alkynes with Ph3SnH to produce β-(Z)-alkenylstannanes selectively.

Solvothermal synthesis of cobalt PCP pincer complexes from [Co2(CO)8]

Treatment of [Co2(CO)8] with the ipso-substituted P(C-X)PY ligands (X = Br, Cl; R = iPr, tBu) bearing Y = NH and CH2 linkers under solvothermal conditions affords the five-coordinate Co(I) and Co(III) complexes [CoI(PCPY-R)(CO)2] and [CoIII(PCPY-R)X2]. The later are paramagnetic exhibiting a solution magnetic moment in the range of 3.0-3.3 μB which is consistent with a d6 intermediate spin system corresponding to two unpaired electrons. In the case of P(C-X)PY ligands (X = Br, Cl; R = tBu; Y = NH) the formation of the square planar Co(II) complex [Co(PCPNH-tBu)X] was favored. This complex gives rise to a magnetic moment of 1.8 μB being consistent with a d7 low spin system corresponding to one unpaired electron. All complexes are characterized by means of spectroscopic techniques (NMR, IR), HR-MS. Representative complexes were also characterized by X-ray crystallography.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s00706-023-03123-x.

Highly Luminescent Heavier Main Group Analogues of Boron-Dipyrromethene

The preparation and photophysical properties of two heavier main group element analogues of boron-dipyrromethene (BODIPY) chromophores are described. Specifically, we have prepared dipyrrin complexes of dichlorogallate (GADIPY) or phenylphosphenium (PHODIPY) units. Whereas cationic PHODIPY is labile, decomposing to a phosphine over time, GADIPY is readily prepared in good yield as a crystalline solid having moderate air- and water-stability. Crystallographically characterized GADIPY displays intense green photoluminescence (λ_em = 505 nm, Φ_em = 0.91 in toluene). These inaugural heavier main group element analogues of BODIPY offer a glimpse into the potential for elaboration to a panoply of chromophores with diverse photophysical properties.

Variable coordination geometries via an amine-tethered-enamidophosphinimine ligand on cobalt

The enamidophosphinimine ligand scaffold decorated with a pendant 2-diethylamino-ethyl group can change its coordination mode upon reaction with hydride reagents or under reducing conditions when coordinated to cobalt.

Non-precious metal complexes with an anionic PCP pincer architecture

This perspective article provides an overview of the advancements in the field of non-precious metal complexes featuring anionic PCP pincer ligands with the inclusion of aliphatic systems. It covers research from the beginning in 1976 until late 2015 and provides a summary of key developments in this area, which is, to date, limited to the metals nickel, cobalt, iron, and molybdenum. While the research in nickel PCP complexes is already quite extensive, the chemistry of cobalt, iron, and molybdenum PCP complexes is comparatively sparse. With other non-precious metals such as copper, manganese, chromium or vanadium no PCP complexes are known as yet. In the case of nickel PCP complexes already many catalytic applications such as Suzuki-Miyaura coupling, C-S cross coupling, Kharasch and Michael additions, hydrosilylation of aldehydes and ketones, cyanomethylation of aldehydes, and hydroamination of nitriles were reported. While iron PCP complexes were found to be active catalysts for the hydrosilylation of aldehydes and ketones as well as the dehydrogenation of ammonia-borane, cobalt PCP complexes were not applied to any catalytic reactions. Surprisingly, only one molybdenum PCP complex is reported, which was capable of cleaving dinitrogen to give a nitride complex. This perspective underlines that the combination of cheap and abundant metals such as nickel, cobalt, and iron with PCP pincer ligands may result in the development of novel, versatile, and efficient catalysts for atom-efficient catalytic reactions.

Cationic mono and dicarbonyl pincer complexes of rhodium and iridium to assess the donor properties of PCcarbeneP ligands

The donor properties of five different PC_carbeneP ligands are assessed by evaluation of the CO stretching frequencies in iridium(i) and rhodium(i) carbonyl cations.

Monoanionic bis(carbene) pincer complexes featuring cobalt(I–III) oxidation states

The synthesis and characterization of a series of cobalt complexes featuring a pincer bis(carbene) ligand of the meta-phenylene-bridged bis-N-heterocyclic carbene (^ArCCC, Ar = 2,6-diispropylphenyl or mesityl) are reported.

Direct synthesis of dicarbonyl PCP-iron hydride complexes and catalytic dehydrogenative borylation of styrene

An efficient method based on the simple metalating reagent Fe(CO)₅ leads to the synthesis of cyclometalled PCP iron carbonyl pincer complexes which are active catalytic precursors for the selective dehydrogenative borylation of styrene.

Synthesis, Structure, and Reactivity of Co(II) and Ni(II) PCP Pincer Borohydride Complexes

The 15e square-planar complexes [Co(PCPMe-iPr)Cl] (2a) and [Co(PCP-tBu)Cl] (2b), respectively, react readily with NaBH4 to afford complexes [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Co(PCP-tBu)(η2-BH4)] (4b) in high yields, as confirmed by IR spectroscopy, X-ray crystallography, and elemental analysis. The borohydride ligand is symmetrically bound to the cobalt center in η2-fashion. These compounds are paramagnetic with effective magnetic moments of 2.0(1) and 2.1(1) μB consistent with a d7 low-spin system corresponding to one unpaired electron. None of these complexes reacted with CO2 to give formate complexes. For structural and reactivity comparisons, we prepared the analogous Ni(II) borohydride complex [Ni(PCPMe-iPr)(η2-BH4)] (5) via two different synthetic routes. One utilizes [Ni(PCPMe-iPr)Cl] (3) and NaBH4, the second one makes use of the hydride complex [Ni(PCPMe-iPr)H] (6) and BH3·THF. In both cases, 5 is obtained in high yields. In contrast to 4a and 4b, the borohydride ligand is asymmetrically bound to the nickel center but still in an η2-mode. [Ni(PCPMe-iPr)(η2-BH4)] (5) loses readily BH3 at elevated temperatures in the presence of NEt3 to form 6. Complexes 5 and 6 are both diamagnetic and were characterized by a combination of 1H, 13C{1H}, and 31P{1H} NMR, IR spectroscopy, and elemental analysis. Additionally, the structure of these compounds was established by X-ray crystallography. Complexes 5 and 6 react with CO2 to give the formate complex [Ni(PCPMe-iPr)(OC(C=O)H] (7). The extrusion of BH3 from [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Ni(PCPMe-iPr)(η2-BH4)] (5) with the aid of NH3 to yield the respective hydride complexes [Co(PCPMe-iPr)H] and [Ni(PCPMe-iPr)H] (6) and BH3NH3 was investigated by DFT calculations showing that formation of the Ni hydride is thermodynamically favorable, whereas the formation of the Co(II) hydride, in agreement with the experiment, is unfavorable. The electronic structures and the bonding of the borohydride ligand in [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Ni(PCPMe-iPr)(η2-BH4)] (5) were established by DFT computations.

Formation of PCP pincer cobalt complexes with cobaltacyclopropane moieties via double Csp3–H bond activation

The introduction and changes of the substituents at the middle carbon atom of the preligand dipyrrolmethane have a significant impact on the reaction results.

Synthesis of [POCOP]-pincer iron and cobalt complexes via Csp3–H activation and catalytic application of iron hydride in hydrosilylation reactions

C_sp3–H bond activation in pincer ligand (Ph₂PO(o-C₆H₂-(4,6-^tBu₂)))₂CH₂ (1) (POCH₂OP) was achieved by Fe(PMe₃)₄ and CoMe(PMe₃)₄ to afford (POCHOP)Fe(H) (PMe₃)₂ (2) and (POCHOP)Co(PMe₃)₂ (4).

Synthesis and Reactivity of Four- and Five-Coordinate Low-Spin Cobalt(II) PCP Pincer Complexes and Some Nickel(II) Analogues

Anhydrous CoCl2 or [NiCl2(DME)] reacts with the ligand PCPMe-iPr (1) in the presence of nBuLi to afford the 15e and 16e square planar complexes [Co(PCPMe-iPr)Cl] (2) and [Ni(PCPMe-iPr)Cl] (3), respectively. Complex 2 is a paramagnetic d7 low-spin complex, which is a useful precursor for a series of Co(I), Co(II), and Co(III) PCP complexes. Complex 2 reacts readily with CO and pyridine to afford the five-coordinate square-pyramidal 17e complexes [Co(PCPMe-iPr)(CO)Cl] (4) and [Co(PCPMe-iPr)(py)Cl] (5), respectively, while in the presence of Ag+ and CO the cationic complex [Co(PCPMe-iPr)(CO)2]+ (6) is afforded. The effective magnetic moments μeff of all Co(II) complexes were derived from the temperature dependence of the inverse molar magnetic susceptibility by SQUID measurements and are in the range 1.9 to 2.4 μB. This is consistent with a d7 low-spin configuration with some degree of spin-orbit coupling. Oxidation of 2 with CuCl2 affords the paramagnetic Co(III) PCP complex [Co(PCPMe-iPr)Cl2] (7), while the synthesis of the diamagnetic Co(I) complex [Co(PCPMe-iPr)(CO)2] (8) was achieved by stirring 2 in toluene with KC8 in the presence of CO. Finally, the cationic 16e Ni(II) PCP complex [Ni(PCPMe-iPr)(CO)]+ (10) was obtained by reacting complex 3 with 1 equiv of AgSbF6 in the presence of CO. The reactivity of CO addition to Co(I), Co(II), and Ni(II) PCP square planar complexes of the type [M(PCPMe-iPr)(CO)] n (n = +1, 0) was investigated by DFT calculations, showing that formation of the Co species, 6 and 8, is thermodynamically favorable, while Ni(II) maintains the 16e configuration since CO addition is unfavorable in this case. X-ray structures of most complexes are provided and discussed. A structural feature of interest is that the apical CO ligand in 4 deviates significantly from linearity, with a Co-C-O angle of 170.0(1)°. The DFT-calculated value is 172°, clearly showing that this is not a packing but an electronic effect.