Alkali and Alkaline Earth Metal Complexes as Versatile Catalysts for Ring-Opening Polymerization of Cyclic Esters

Biodegradable polyesters such as poly(ϵ-caprolactone) (PCL) and poly(lactic acid) (PLA) have been considered for use in several areas, such as drug delivery devices, sutures, tissue engineering, and GBR membranes, due to its bio-renewability, biodegradability, and biocompatibility. Several synthetic techniques for the preparation of polyesters have been reported in the literature, amongst which the ring-opening polymerization (ROP) of cyclic esters is the most efficient. A convenient approach to access iso-selective PLAs is polymerization of racemic lactide (rac-LA), which shows excellent stereoregularity without the need for costly chiral auxiliaries or ligands. In this personal account, we review a series of methods that have been practiced to the synthesis of biodegradable polyesters from various cyclic monomers using alkali and alkaline earth metal complexes as efficient catalysts.

Alkaline Earth Metal-Mediated Highly Iso-selective Ring-Opening Polymerization of rac-Lactide

Alkaline earth (Ae) metal complexes of the aminophosphine borane ligand are highly active and iso-selective catalysts for the ring-opening polymerization (ROP) of rac-lactide (LA). The polymerization reactions are well controlled and produce polylactides with molecular weights that are precise and narrowly distributed. Kinetic studies reveal that the ROP of rac-LA catalyzed by all Ae metal complexes had a first-order dependency on LA concentration as well as catalyst concentration. A plausible reaction mechanism for Ae metal complex-mediated ROP of rac-LA is discussed, based on controlled kinetic experiments and molecular chain mobility.

Alkali metal complex-mediated ring-opening polymerization of rac-LA, ε-caprolactone, and δ-valerolactone

Catalytic ring opening polymerization (ROP) of rac-lactide, ε-caprolactone, and δ-valerolactone using alkali metal (Li, Na, K) complexes as competent catalysts are reported.

Alkali metal complexes as efficient catalysts for hydroboration and cyanosilylation of carbonyl compounds

We report here reactions between the N-adamantyliminopyrolyl ligand 2-(AdN[double bond, length as m-dash]CH)-C4H3NH (L-H) and alkali metal hexamethyldisilazides [MN(SiMe3)2] (M = Li, Na and K) to afford the dimeric [{2-(AdN[double bond, length as m-dash]CH)-C4H3NLi(THF)}2] (1), [{2-(AdN[double bond, length as m-dash]CH)-C4H3N}{Na(THF)1.5}2] (2) and polymeric [{2-(AdN[double bond, length as m-dash]CH)-C4H3NK(THF)}n] (3) complexes at ambient temperature. A one-pot reaction between L-H, [KN(SiMe3)2] and alkaline earth metal diiodide (AeI2) in a 2 : 2 : 1 molar ratio, which resulted in the formation of a heteroleptic Ae metal complex [κ2-{2-(AdN[double bond, length as m-dash]CH)-C4H3N}2Ae(THF)2] [Ae = Mg (4), Ca (5)], is also reported. The solid-state structures of complexes 1, 3 and 4 were established through single-crystal X-ray diffraction analysis. The alkali and alkaline earth metal complexes 1-5 were utilised as precatalysts for the catalytic hydroboration of pinacolborane (HBpin) with aldehydes and ketones, and potassium complex 3 was identified as a competent catalyst under mild conditions. Additionally, cyanosilylation of carbonyl compounds was explored with trimethylsilyl cyanide and aldehydes/ketones, using the alkali metal precatalyst 3 under mild conditions. In both catalytic processes, the potassium catalyst 3 exhibited high tolerance towards a number of functional groups.

Facile microwave synthesis, structural diversity and herbicidal activity of six novel alkaline-earth metal complexes (AECs) based on skeletal isomerization chlorophenoxyacetic acids

Facile microwave synthesis, structural diversity and herbicidal activity of six novel alkaline-earth metal complexes (AECs) based on skeletal isomerization chlorophenoxyacetic acids.

Hydroamination of carbodiimides, isocyanates, and isothiocyanates by a bis(phosphinoselenoic amide) supported titanium(iv) complex

The hydroamination of heterocumulenes such as carbodiimides, isocyanates, and isothiocyanates by a bis(phosphinoselenoic amide) supported titanium(iv) complex as a precatalyst is reported here. The titanium(iv) complex [{Ph₂P(Se)NCH₂CH₂NPPh₂(Se)}Ti(NMe₂)₂] (1) was synthesised by the reaction of tetrakis-(dimethylamido)titanium(iv) [Ti(NMe₂)₄] with [{Ph₂P(Se)NHCH₂CH₂NHPPh₂(Se)}] in toluene at ambient temperature. Titanium complex 1 proved to be a competent pre-catalyst for the addition of an amine N-H bond to carbodiimides, isocyanates, and isothiocyanates. The reaction scope was expanded to reactions of aliphatic and aromatic amines with phenylisocyanates and phenylisothiocyanates in toluene solvents proceeding rapidly at room temperature with 5 mol% catalyst loadings to yield the corresponding urea and thio-urea derivatives up to 99%. However, ambient temperature was needed for hydroamination of 1,3-dicyclohexylcarbodiimide. The amine addition reactions with isocyanates showed first order kinetics with respect to catalyst 1 as well as substrates. The most plausible mechanism for the hydroamination reaction was established by isolating 1,1-dimethylphenyl urea as a side product.

Calcium complexes with imino-phosphinanilido chalcogenide ligands for heterofunctionalisation catalysis

Syntheses, characterisation and utilisation of the calcium complexes supported by imino-phosphinanilido chalcogenide ligands {Ph₂P(E)–N–C₆H₄–CHN(Dipp)} (E = S, Se) as molecular precatalysts for the heterofunctionalisation of styrene are reported.

Group 1 and group 2 metal complexes supported by a bidentate bulky iminopyrrolyl ligand: synthesis, structural diversity, and ε-caprolactone polymerization study

We report here a series of alkali and alkaline earth metal complexes, each with a bulky iminopyrrolyl ligand [2-(Ph3CN=CH)C4H3NH] (1-H) moiety in their coordination sphere, synthesized using either alkane elimination or silylamine elimination methods or the salt metathesis route. The lithium salt of molecular composition [Li(2-(Ph3CN=CH)C4H3N)(THF)2] (2) was prepared using the alkane elimination method, and the silylamine elimination method was used to synthesize the dimeric sodium and tetra-nuclear potassium salts of composition [(2-(Ph3CN=CH)C4H3N)Na(THF)]2 (3) and [(2-(Ph3CN=CH)C4H3N)K(THF)0.5]4 (4) respectively. The magnesium complex of composition [(THF)2Mg(CH2Ph){2-(Ph3CN=CH)C4H3N}] (5) was synthesized through the alkane elimination method, in which [Mg(CH2Ph)2(OEt2)2] was treated with the bulky iminopyrrole ligand 1-H in 1 : 1 molar ratio, whereas the bis(iminopyrrolyl)magnesium complex [(THF)2Mg{2-(Ph3CN=CH)C4H3N}2] (6) was isolated using the salt metathesis route. The heavier alkaline earth metal complexes of the general formula {(THF)nM(2-(Ph3CN=CH)C4H3N)2} [M = Ca (7), Sr (8), and n = 2; M = Ba (9), n = 3] were prepared in pure form using two synthetic methods: in the first method, the bulky iminopyrrole ligand 1-H was directly treated with the alkaline earth metal precursor [M{N(SiMe3)2}2(THF)n] (where M = Ca, Sr and Ba) in 2 : 1 molar ratio in THF solvent at ambient temperature. The complexes 7-9 were also obtained using the salt metathesis reaction, which involves the treatment of the potassium salt (4) with the corresponding metal diiodides MI2 (M = Ca, Sr and Ba) in 2 : 1 molar ratio in THF solvent. The molecular structures of all the metal complexes (1-H, 2-9) in the solid state were established through single-crystal X-ray diffraction analysis. The complexes 5-9 were tested as catalysts for the ring-opening polymerization of ε-caprolactone. High activity was observed in the heavier alkaline earth metal complexes 7-9, with a very narrow polydispersity index in comparison to that of magnesium complexes 5 and 6.

Synthesis, structure and reactivity study of magnesium amidinato complexes derived from carbodiimides and N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-butadiene ligands

We report an amidinato ligand-supported series of magnesium complexes obtained from the insertion of a magnesium-carbon bond into a carbon-nitrogen double bond of different carbodiimides and α-diimine ligands. The magnesium complexes [Mg(CH2Ph){CyN[double bond, length as m-dash]C(CH2Ph)NCy}]2 (), [Mg(CH2Ph){(i)PrN[double bond, length as m-dash]C(CH2Ph)N(i)Pr}]2 () and the homoleptic [Mg{(t)BuN[double bond, length as m-dash]C(CH2Ph)N(t)Bu}2] () (Cy = cyclohexyl, (i)Pr = isopropyl, (t)Bu = tert-butyl) were prepared by the reaction of dibenzyl magnesium [Mg(CH2Ph)2(Et2O)2] with the respective carbodiimides either in 1 : 1 or 1 : 2 molar ratio in toluene. The analogous reaction of [Mg(CH2Ph)2(Et2O)2] with the N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-1,3-butadiene (Dipp2DAD) ligand afforded the corresponding homoleptic magnesium complex [Mg{DippN[double bond, length as m-dash]C(CH2Ph)CH2NDipp}2] () (Dipp = 2,6 diisopropylphenyl) in good yield. The solid-state structures of magnesium complexes were confirmed by single-crystal X-ray diffraction analysis. It was observed that in each case, a magnesium-carbon bond was inserted into the carbon-nitrogen double bond of either carbodiimides or Dipp2DAD resulting in a monoanionic amido-imino ligand. In a further reaction between and N-aryliminopyrrolyl ligand 2-(2,6-(i)Pr2C6H3N[double bond, length as m-dash]CH)C4H3NH (ImpDipp-H) in 1 : 2 molar ratio, a new magnesium complex [Mg(ImpDipp)2{CyN[double bond, length as m-dash]C(CH2Ph)NHCy}] (), with one amidinato and two aryliminopyrrolyl ligands in the coordination sphere, was obtained in good yield. In contrast, the homoleptic magnesium complex reacted with one equivalent of N-aryliminopyrrolyl ligand (ImpDipp-H) to produce another mixed ligated magnesium complex [Mg{DippN[double bond, length as m-dash]C(CH2Ph)CH2NDipp}(ImpDipp)] (), with a benzylated DAD ligand and aryliminopyrrolyl ligands in the coordination sphere. Further reaction of complex with benzyl alcohol (PhCH2OH) afforded the third mixed ligated magnesium complex [Mg{DippN[double bond, length as m-dash]C(CH2Ph)CH2NDipp}(OCH2Ph)2] () in very good yield. The magnesium complexes were characterised using standard analytical/spectroscopic techniques and their solid-state structures were established by single-crystal X-ray diffraction analysis.

Imidazol-2-ylidene-N′-phenylureate ligands in alkali and alkaline earth metal coordination spheres – heterocubane core to polymeric structural motif formation

Synthetic and structural details of imidazol-2-ylidene-N′-phenylureate ligand supported two potassium complexes with a hetero-cubane K₄O₄ core and a polymeric structure, along with a mixed metal Ca–K complex are presented.

Chiral alkaline earth metal complexes with M–Se direct bond (M = Mg, Ca, Sr, Ba): syntheses, structures and ε-caprolactone polymerisation

Synthesis and structural details of enantiomerically pure alkaline earth metal complexes (Mg, Ca, Sr, Ba) supported by chiral phosphinoselenoic amides are reported.

Heavier group 2 metal complexes with a flexible scorpionate ligand based on 2-mercaptopyridine

Synthetic and structural details of flexible scorpionate ligand based on 2-mercaptopyridine (Bmp) supported heavier alkaline earth metal complexes with metal–sulfur bonds (metal = Sr, Ba) have been presented.