A binuclear Zn(II)-Zn(II) complex from a 2-hydroxybenzohydrazide-derived Schiff base for selective detection of pyrophosphate

Selective pyrophosphate detection via metal complexes

Pyrophosphate (PPi) anions are crucial in numerous biological and ecological processes involved in energy conversion, enzymatic reactions, and metabolic regulation along with adenosine. They are also significant biological markers for various processes related to diseases. Fluorescent PPi sensors would enable visual and/or biological detection in convenient settings. However, the current availability of commercial sensors has been limited to costly enzymes that are not compatible for imaging. Sensor development has also encountered challenges such as poor selectivity and stability, and limited practical applications. In this review, we analyze the situation of PPi sensing via commercial kits and focus on sensors that use metal complexes. We address their designs, sensing mechanisms, selectivities and detection limits. Finally, we discuss limitations and perspectives for PPi detection and imaging.

A new diformyl phenol based chemosensor selectively detects Zn2+ and Co2+ in the nanomolar range in 100% aqueous medium and HCT live cells

A new diformyl phenol based chemosensor that can sense Zn2+ and Co2+ in the nanomolar range in 100% aqueous solution and in HCT cells was explored.

An AIRE-active far-red ratiometric fluorescent chemosensor for specifically sensing Zn2+ and resultant Zn2+ complex for subsequent pyrophosphate detection in almost pure aqueous media

A simple Schiff-base fluorescent chemosensor (1) was synthesized by the reaction of 3-amino-pyrazine-2-carbohydrazide and 7-diethylamino-3-formylcoumarin; the sensor 1 displayed a notable green emission at 524 nm in DMSO and an aggregation-induced ratiometric emission (AIRE) at 555 nm in an almost buffered aqueous media (0.5% DMSO content). The AIRE of 1 was quenched following binding to Zn²⁺ ions, while the fluorescence emission in the far-red region was evidently enhanced at 628 nm. Notably, the ratiometric signal output could be utilized to specifically distinguish Zn²⁺ among various metal ions. Moreover, the 1-Zn²⁺ complex was effectively employed as a fluorescent ratiometric chemosensor for pyrophosphate (PPi) detection. The detection limit was 3.52 μM and 2.45 μM for Zn²⁺ and PPi, respectively. The binding mechanism was evaluated by ¹H NMR, ESI-MS, single-crystal X-ray diffraction, TEM, time-resolved fluorescence spectrophotometry, and density functional theory studies. Overall, owing to its sensitive fluorescence behavior, cell imaging studies demonstrated that this sensor is capable of sensing Zn²⁺ and PPi in living cells.

Efficient synthesis of 6,6′-diamido-2,2′-dipicolylamine ligands for potential phosphate anion sensing

Through retrosynthetic analysis, functionalized 6,6′-diamido-2,2′-dipicolylamines (DA-DPAs) have been efficiently synthesized, which may accelerate the development of selective probes towards phosphate anions.

Selective sensing of ATP by hydroxide-bridged dizinc(ii) complexes offering a hydrogen bonding cavity

This work illustrates the highly selective fluorescence detection of ATP in the presence of other competing anions, such as AMP, ADP, PPi and other phosphates by using a set of hydroxide-bridged dizinc(ii) complexes offering a cavity lined with hydrogen bonds and other interactive forces. ATP, as a whole, was recognized by the synergic combination of Zn-phosphate bonding, ππ stacking between the adenine ring of ATP and the pyridine ring of the dizinc complex and hydrogen bonding interactions that modulate the cavity structure of the dizinc complexes.

Spectrophotometric, fluorimetric and electrochemical selective pyrophosphate/ATP sensing based on the dimethyltin(IV)-tiron system

Sensing of pyrophosphate anion (PPi) in the presence of nucleotide triphosphates allows the real time monitoring of the polymerase chain reaction. To get a deeper understanding of the factors involved in PPi/nucleotide triphosphate discrimination, a detailed study on the performance of a dimethyltin (IV)-catecholate complex capable of both separate fluorimetric or electrochemical detection of PPi in the presence of adenosine triphosphate (ATP) has been undertaken. Dimethyltin (IV) tightly binds PPi or ATP, and forms a stable 1:1 complex with tiron (4,5-dihydroxy-1,3-benzenedisulfonic acid) in water. The complexation equilibria with all components are characterized quantitatively by potentiometric and spectroscopic titrations. Pyrophosphate anion can be detected owing to its ability to release free tiron from the complex by measuring either a fluorimetric or an electrochemical signal. On the contrary, ATP does not displace tiron but causes an interference with PPi in the fluorimetric detection method due to the formation of a ternary Me₂Sn(IV)-tiron-ATP complex with optical properties intermediate between those of free and bound tiron. In the electrochemical (square wave voltammetry) method, the ternary ATP complex shows a separate peak which does not coincide with the peaks of neither free nor bound tiron, thus making possible the simultaneous detection of ATP in addition to PPi.

A cationic tetrahedral Zn(ii) cluster based on a new salicylamide imine multidentate ligand: synthesis, structure and fluorescence sensing study

We present here a monocationic Zn^II tetrahedral cluster which is extremely stable and exhibits highly sensitive and selective recognition of phosphates against other common anions in water containing media.

Pyrophosphate-Induced Intramolecular Excimer Formation in Dinuclear Zinc(II) Complexes with Tetrakisquinoline Ligands

Dinuclear Zn²⁺ complexes with HTQHPN ( N,N,N' ,N'-tetrakis(2-quinolylmethyl)-2-hydroxy-1,3-propanediamine) derivatives have been prepared, and their pyrophosphate (PPi, P₂O₇^4-) sensing properties were examined. The ligand library includes six HTQHPN derivatives with electron-donating/withdrawing substituents, an extended aromatic ring, and six-membered chelates upon zinc binding. Complexation of ligand with 2 equiv of Zn²⁺ promotes small to moderate fluorescence enhancement around 380 nm, but in the cases of HTQHPN, HT(6-FQ)HPN ( N,N,N' ,N'-tetrakis(6-fluoro-2-quinolylmethyl)-2-hydroxy-1,3-propanediamine), and HT(8Q)HPN ( N,N,N' ,N'-tetrakis(8-quinolylmethyl)-2-hydroxy-1,3-propanediamine), subsequent addition of PPi induced a significant fluorescence increase around 450 nm. This fluorescence enhancement in the long-wavelength region is attributed to the conformational change of the bis-(quinolylmethyl)amine moiety which promotes intramolecular excimer formation between adjacent quinolines upon binding with PPi. The structures of PPi- and phosphate-bound dizinc complexes were revealed by X-ray crystallography utilizing phenyl-substituted analogues. The zinc complex with HT(8Q)HPN exhibits the highest signal enhancement ( I_PPi/ I₀ = 12.5) and selectivity toward PPi sensing ( I_ATP/ I_PPi = 20% and I_ADP/ I_PPi = 25%). The fluorescence enhancement turned to decrease gradually after the addition of more than 1 equiv of PPi due to the removal of zinc ion from the ligand-zinc-PPi ternary complex, allowing the accurate determination of PPi concentrations at the fluorescence maximum composition. The practical application of the present method was demonstrated monitoring the enzymatic activity of pyrophosphatase.

Hexaphenylbenzene-based fluorescent aggregates for detection of zinc and pyrophosphate ions in aqueous media: tunable self-assembly behaviour and construction of a logic device

The aggregates of HPB derivative 7 exhibited “on–on” response towards Zn²⁺ ions and this in situ prepared 7-Zn2+ ensemble was utilized as a “not quenched” probe for detection of PPi ions in aqueous media.

Deciphering the CHEF-PET-ESIPT liaison mechanism in a Zn2+ chemosensor and its applications in cell imaging study

Proper fusion of fluorescence mechanisms in a single fluorophore unit is highly desirable to obtain better sensitivity, as well as selectivity towards a particular metal ion.

A Fluorescent Sensor and Gel Stain for Detection of Pyrophosphorylated Proteins

The design and synthesis of a fluorescent sensor of diphosphate esters along with its application for in-gel detection is described. Dinuclear zinc complex 1 selectively binds diphosphate esters in the presence of various other functional groups, including monophosphate esters. Complex 1 also constitutes a competent stain for visualization of pyrophosphorylated proteins in polyacrylamide gels. This reagent will facilitate the validation and exploration of protein pyrophosphorylation.

A turn-on coordination nanoparticle-based fluorescent probe for phosphate in human serum

Coordination nanoparticles (CNPs) are becoming attractive platforms for chemical sensing applications because their unique adjustable properties offer the opportunity to design various luminescent nanoprobes. Here, we present a CNP-based fluorescent nanoprobe, in which fluorophores (rhodamine B, RB) and quenchers (methylene blue, MB) were spontaneously enfolded by coordination networks self-assembled of adenine, biphenyl-4,4'-dicarboxylic acid (BDA) and zinc ions. The aggregation of fluorophores and quenchers in CNPs resulted in a quenched state fluorescence of RB. RB and MB could be released from CNPs in the presence of phosphate, which triggered the fluorescence of RB. On the basis of recognition-driven disassembly principle, a novel turn-on fluorescent probe for the determination of PO4(3-) with a wide response range (0.5-50 μM) has been successfully applied in the detection of phosphate in human serum samples. This work not only develops a probe for phosphate but also provides a general strategy for designing nanoprobes or nanocarriers towards various targets by altering organic linkers or metal ions.