Tumor Microenvironment Triggered the In Situ Synthesis of an Excellent Sonosensitizer in Tumor for Sonodynamic Therapy

An ultrasound-triggered sonodynamic therapy has shown great promise for cancer therapy. However, its clinical applications are very limited because the traditional sonosensitizers tend to suffer from very poor efficiency combined with low retention in cancer cells and low tumor selectivity. Therefore, sonosensitizers with higher effectivity, higher tumor cell retention, and higher tumor cell specificity are highly required. Herein, we constructed a Ti2C(OH)X nanosheet, which was a poor sonosensitizer but had a long circulation in the blood system. However, it was very interesting to find that the tumor microenvironment could in situ turn Ti2C(OH)X nanosheet into a novel and excellent sonosensitizer with a nanofiber structure in tumors, exhibiting excellent ability to generate reactive oxygen species (ROS) under ultrasound. Moreover, the nanofiber structure made it very difficult to get out of cancer cells, highly enhancing the retention of the sonosensitizer in the tumor, thereby enabling it to effectively and selectively kill cancer cells in vivo. Our findings demonstrate that the strategy of the tumor microenvironment triggering the in situ synthesis of an effective sonosensitizer in tumor provided a promising means to simultaneously increase the efficiency, sonosensitizer retention in cancer cells, and cancer selectivity, thereby effectively killing cancer cells but causing little damage to healthy tissues via the sonodynamic therapy.

Titanate nanoribbon-based nanobiohybrid for potential applications in regenerative medicine

Nanoparticles capable of mimicking natural tissues represent a major technological advancement in regenerative medicine. In this pilot study, the development of a new nanohybrid composed of titanate nanoribbons to mimic the extracellular matrix is reported. During the first phase, nanoribbons were synthesized by hydrothermal treatment. Subsequently, titanate nanoribbons were functionalized by heterobifunctional polyethylene-glycol (PEG) to graft type I collagen on their surface. Biological properties of this new nanobiohybrid such as cytotoxicity to cardiac cells and platelet aggregation ability were evaluated. The so-formed nanobiohybrid permits cellular adhesion and proliferation favoring fine cardiac tissue healing and regeneration.

Titanate nanoribbons functionalized by heterobifunctional polymer and type I collagen for cellular adhesion and proliferation. This new nanobiohybrid affected neither cytotoxicity nor platelet aggregation ability.

Changing the morphology of one-dimensional titanate nanostructures affects its tissue distribution and toxicity

The present research investigated the impact of the morphology change of titanate (TiO₂) nanostructures on its tissue distribution and toxicity. The TiO₂ nanotubes, rods, and ribbons were synthesized by the hydrothermal technique, and the morphology was adjusted by alteration of the hydrothermal duration time. The characterization techniques were X-ray diffraction, high-resolution transmission electron microscopy, dynamic light scattering, and the Brunauer-Emmett-Teller method for measuring the surface area. The intravenously administrated dose (5 mg/kg) was injected as a single dose for 1 day and consecutively for 42 days. The quantitative analysis of accumulated TiO₂ nanostructures in the liver, spleen, and the heart was performed using an inductively coupled plasma emission spectrometer, and the organs' toxicity was estimated by histopathological analysis. The prepared nanostructures exhibited differences in morphology, crystallinity, size distribution, surface area, zeta potential, and aspect ratio. The results revealed a tissue distribution difference between the liver, spleen, and heart of these nanostructures, the distribution order was the liver, spleen, and the heart for all TiO₂ nanostructures. The toxicity was induced with different degrees. The nanotubes were the most harmful among the three formats. In summary, changes in the morphology of the TiO₂ nanostructures change its distribution and toxicity.

Enhanced photoelectrochemical water splitting activity of carbon nanotubes@TiO2 nanoribbons in different electrolytes

Hydrogen production from water splitting by a photocatalytic process is one way that can be used to solve global problems related to energy depletion and environmental pollution. This work aims to design and characterize a novel photocatalyst nanohybrid carbon nanotubes@TiO₂ nanoribbons (CNTs@TNRs) for enhanced photoelectrochemical (PEC) water splitting in different electrolytes under visible light irradiance. Here, hydrothermal and chemical vapor deposition (HT-CVD) were combined to grow CNTs @ the nanopits of TNRs producing network of nanohybrid CNTs@TNRs. The structural, morphological, optical, and photocatylatic properties of the TNRs and CNTs@TNRs nanohybrid were characterized by different techniques. The crystallite size is increased from 14.86 nm for TNRs to 21.61 nm for CNTs@TNRs nanohybrid. The CNTs@TNRs nanohybrid has well-resolved nanopits on the surface of the TNRs with an average diameter of 10 nm. The absorption edge of CNTs@TNRs relative to TNRs was strongly shifted to the visible light region. The band gap values are 3.78 and 2.07 eV for TNRs and CNTs@TNRs, respectively. The TNRs and CNTs@TNRs were used for the photocatalytic water splitting under visible light irradiance in Na₂S₂O₃, HCl and KOH electrolytes of different concentrations. The calculated incident photon-to-current conversion efficiency (IPCE) was 97% at 510 nm. These values are higher than those previously reported for different photoelectrodes. The number of hydrogen moles was calculated to be 300 μmol h^-1 cm^-2. Therefore, our work demonstrates a feasible route for efficient PEC water splitting under sunlight irradiation utilizing the novel CNTs@TNRs photocatalyst.

Selective oxidation of thioanisole by titanium complexes immobilized on mesoporous silica nanoparticles: elucidating the environment of titanium(iv) species

The coordination environment of titanium of the catalysts was investigated by DRUV–vis, Raman and ^47/49Ti MAS-NMR spectroscopies and solid-state electrochemical techniques.

Taxane-Grafted Metal-Oxide Nanoparticles as a New Theranostic Tool against Cancer: The Promising Example of Docetaxel-Functionalized Titanate Nanotubes on Prostate Tumors

The combination of anticancer drugs and metal oxide nanoparticles is of great interest in cancer nanomedicine. Here, the development of a new nanohybrid, titanate nanotube-docetaxel (TiONts-DTX) is reported, the two parts of which are conjugated by covalent linkages. Unlike most nanoparticles currently being developed for biomedical purposes, TiONts present a needle-shaped morphology. The surface of TiONts is linked with 3-aminopropyl triethoxysilane and with a hetero-bifunctional polymer (polyethylene glycol) to create well-dispersed and biocompatible nanovectors. The prefunctionalized surface of this scaffold has valuable attachments to graft therapeutic agents (DTX in our case) as well as chelating agents (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) to monitor the nanohybrids. To evaluate drug efficacy, in vitro tests have demonstrated that the association between TiONts and DTX shows cytotoxic activity against a hormone-refractory prostate cancer cell line (22Rv1) whereas TiONts without DTX do not. Finally, the first in vivo tests with intratumoral injections show that more than 70% of TiONts nanovectors are retained within the tumor for at least 7 d. Moreover, tumor growth in mice receiving TiONts-DTX is significantly slower than that in mice receiving free DTX. This nanohybrid can thus become a promising new tool in biomedicine to fight against prostate cancer.

Strain Engineering to Modify the Electrochemistry of Energy Storage Electrodes

Strain engineering has been a critical aspect of device design in semiconductor manufacturing for the past decade, but remains relatively unexplored for other applications, such as energy storage. Using mechanical strain as an input parameter to modulate electrochemical potentials of metal oxides opens new opportunities intersecting fields of electrochemistry and mechanics. Here we demonstrate that less than 0.1% strain on a Ni-Ti-O based metal-oxide formed on superelastic shape memory NiTi alloys leads to anodic and cathodic peak potential shifts by up to ~30 mV in an electrochemical cell. Moreover, using the superelastic properties of NiTi to enable strain recovery also recovers the electrochemical potential of the metal oxide, providing mechanistic evidence of strain-modified electrochemistry. These results indicate that mechanical energy can be coupled with electrochemical systems to efficiently design and optimize a new class of strain-modulated energy storage materials.

Enhanced sunlight photocatalytic activity of Ag3PO4 decorated novel combustion synthesis derived TiO2 nanobelts for dye and bacterial degradation

This study demonstrates the synthesis of TiO2 nanobelts using solution combustion derived TiO2 with enhanced photocatalytic activity for dye degradation and bacterial inactivation. Hydrothermal treatment of combustion synthesized TiO2 resulted in unique partially etched TiO2 nanobelts and Ag3PO4 was decorated using the co-precipitation method. The catalyst particles were characterized using X-ray diffraction analysis, BET surface area analysis, diffuse reflectance and electron microscopy. The photocatalytic properties of the composites of Ag3PO4 with pristine combustion synthesized TiO2 and commercial TiO2 under sunlight were compared. Therefore the studies conducted proved that the novel Ag3PO4/unique combustion synthesis derived TiO2 nanobelt composites exhibited extended light absorption, better charge transfer mechanism and higher generation of hydroxyl and hole radicals. These properties resulted in enhanced photodegradation of dyes and bacteria when compared to the commercial TiO2 nanocomposite. These findings have important implications in designing new photocatalysts for water purification.

High photoconductive combustion synthesized TiO2derived nanobelts for photocatalytic water purification under solar irradiation

A novel system of partially etched TiO₂nanobelts was developed that exhibits superior photocatalytic activity to purify waste water.