Detection Enhancement of One Multifunctional Cd-Metal-Organic Framework toward Tetracycline Antibiotics by Simply Mixing Eu3+ in Suspension

It is necessary to find more simple methods to improve the detection selectivity and sensitivity of antibiotics. Herein, we constructed a novel three-dimensional (3D) Cd-MOF LCU-117 assembled from p-terphenyl-4,2″,5″,4'-tetracarboxylic acid, which showed a special 3D helical structure with carboxylic acid ligands and nitrogen-containing ligands crossing each other vertically. Luminescence measurements indicated that LCU-117 has high selectivity and sensitivity toward Eu³⁺ through the ratiometric effect. Meanwhile, this complex itself could detect antibiotics oxytetracycline (OTC) through the turn-off mechanism. When Eu³⁺ was added in suspensions of LCU-117 (noted as Eu³⁺@LCU-117), the detection toward OTC was enhanced significantly and visually. The sensing mechanism was investigated in detail by various measurements and theoretical calculations. LCU-117 has a good effect on the logic gate, potential fingerprint detection, and mixed-matrix membranes (MMMs). The practical application for monitoring OTC in water samples also provided a satisfactory result.

Multicomponent Anti-Kasha's Rule Emission from Nanotubular Metal-Organic Frameworks for Selective Detection of Small Molecules

The peak photoluminescence (PL) of conventional fluorophores is independent of the excitation wavelength (called Kasha's rule), while the search of metal-organic framework materials with the so-called anti-Kasha's rule emission remains very limited. Herein, we report the observation of anti-Kasha's rule emission in a multicomponent PL three-dimensional nanotubular metal-organic framework (abbr. MOF-NT), [Zn(μ-L)(μ-bix)]_n·0.33nH₂O [H₂L = biphenyl-3,5-dicarboxylic acid; bix = 1,4-bis(imidazole-1-ylmethyl)benzene]. The MOF-NT crystalline sample represents a notable example of strong excitation-dependent fluorescence from the ultraviolet to the visible spectral region. Moreover, by virtue of electronic flexibility and high PL efficiency, MOF-NT shows a discriminative PL response between isomeric nitroaromatic compounds. The work demonstrated the intrinsic anti-Kasha's rule emission in the crystalline-state MOF materials, providing new visions for the development of advanced solid-state emissive materials.

Conformational isomerism involving the carboxylate groups of a linker in metal organic frameworks and its distinctive influence on the detection of ketones

Selective sensing of various ketones by Zn(ii) based conformational MOF isomers.

Novel alkaline earth metal–organic frameworks with thiophene groups for selective detection of Fe3+

This work demonstrates that the alkaline earth ion radii play an important role in coordination numbers and topologies for constructing MOFs, and these MOFs can be used as fast-response fluorescence sensors for the detection of Fe³⁺.

Construction of a bifunctional Zn(ii)–organic framework containing a basic amine functionality for selective capture and room temperature fixation of CO2

The construction of a novel 3D, porous, bifunctional Zn(ii)–organic framework featuring two-types of 1D channels for efficient fixation of CO₂ to cyclic carbonates under solvent-free mild conditions of RT is reported.

Luminescent sensing of nitroaromatics by crystalline porous materials

Designing strategies for the syntheses of targeted luminescent MOFs, nanoparticle/MOF composites and COFs described and their application in sensing nitroaromatic compounds and explosives discussed.

Sensing organic analytes by metal–organic frameworks: a new way of considering the topic

In this review, our goal is comparison of advantageous and disadvantageous of MOFs about signal-transduction in different instrumental methods for detection of different categories of organic analytes.

Self-assembly of three-dimensional oxalate-bridged alkali(i)–lanthanide(iii) heterometal–organic frameworks

Three isostructural 3D oxalate bridged alkali(i)–lanthanide(iii) MOFs with a pcu net based on cubane-like [Ln₄O₄] clusters and their magnetic, CO₂ adsorption, and photoluminescence sensing properties are presented.

Three-in-one is really better: exploring the sensing and adsorption properties in a newly designed metal-organic system incorporating a copper(ii) ion

A 2-D copper(ii)-based coordination polymer, [Cu(SCN)(hmp)]_n CP (1), was crystallized via the slow evaporation method after the reaction of CuSO₄·5H₂O, 2-pyridinemethanol (hmpH), sodium thiocyanate and sodium hydroxide in water for functional applications. CP (1) was characterized via elemental analysis, FTIR, PXRD, magnetic, EPR, crystallographic and TGA studies. The crystal structure and EPR data confirmed a square pyramidal geometry around the Cu(ii) ions. The topological analysis revealed that CP 1 has a {6^{^}3} point symbol with a [6.6.6] extended point symbol and 3-c net, uninodal net having hcb and Shubnikov hexagonal plane net/(6,3) type of uncommon topology. The magnetic studies suggested the strong antiferromagnetic nature of CP (1). The fluorescence sensing property of CP (1) was investigated with different nitro aromatic compounds and hazardous metal ions. CP (1) demonstrated high selectivity and sensitivity towards nitrobenzene, even in the presence of other competitive nitro aromatics. In addition, CP (1) showed excellent selectivity and sensitivity toward Fe³⁺ over other metal ions. The possible detection mechanisms were proposed employing UV-visible and fluorescence spectroscopy and DFT calculations. CP (1) also showed excellent recyclability towards both analytes, and its initial intensity was almost regained after several washings. Moreover, CP (1) acted as an excellent adsorbent material for natural dyes with different charges and sizes, i.e., methylene blue (MB), methyl orange (MO) and Rhodamine-B. Furthermore, CP (1) was utilized repeatedly for the effective adsorption of MB from wastewater without significant loss in its adsorption capacity. Hence, the present CP (1) was designed to relate coordination chemistry with various functional applications of interest.

Fluorescent sensing and selective adsorption properties of metal-organic frameworks with mixed tricarboxylate and 1H-imidazol-4-yl-containing ligands

Herein, two metal-organic frameworks (MOFs), [Co₄(μ₃-OH)₂(L)(BTB)₂(H₂O)₃]·5.6H₂O (1) and [Cd₃(L)₂(BTB)₂(μ₂-H₂O)]·7.4H₂O (2), based on 1,3-di(1H-imidazol-4-yl)benzene (L) and 1,3,5-tri(4-carboxyphenyl)benzene (H₃BTB), respectively, have been achieved. Compound 1 is a porous three-dimensional (3D) framework with butterfly-like tetranuclear clusters as 7-connected nodes, and compund 2 is a 3D net with a different topology. Remarkably, compounds 1 and 2 exhibit selective adsorption of CO₂ over N₂ and methyl orange (MO) dye molecules. Magnetic measurements reveal that there are antiferromagnetic interactions within the tetranuclear cluster in 1. Furthermore, 2 was well-dispersed in different solvents, and their luminescent properties were investigated, and the results indicated that 2 could be considered as a potential luminescent probe for the detection of ketone molecules.

Topological identification of the first uninodal 8-connected lsz MOF built from 2,2′-difluorobiphenyl-4,4′-dicarboxylate pillars and cadmium(II)–triazolate layers

Using polynuclear metal clusters as nodes, many high-symmetry high-connectivity nets, like 8-connnectedbcuand 12-connectedfcu, have been attained in metal–organic frameworks (MOFs). However, construction of low-symmetry high-connected MOFs with a novel topology still remains a big challenge. For example, a uninodal 8-connectedlsznetwork, observed in inorganic ZrSiO4, has not been topologically identified in MOFs. Using 2,2′-difluorobiphenyl-4,4′-dicarboxylic acid (H2L) as a new linker and 1,2,4-triazole (Htrz) as a coligand, a novel three-dimensional CdII–MOF, namely poly[tetrakis(μ4-2,2′-difluorobiphenyl-4,4′-dicarboxylato-κ5O1,O1′:O1′:O4:O4′)tetrakis(N,N-dimethylformamide-κO)tetrakis(μ3-1,2,4-triazolato-κ3N1:N2:N4)hexacadmium(II)], [Cd6(C14H6F2O4)4(C2H2N3)4(C3H7NO)4]n, (I), has been prepared. Single-crystal structure analysis indicates that six different CdIIions co-exist in (I) and each CdIIion displays a distorted [CdO4N2] octahedral geometry with four equatorial O atoms and two axial N atoms. Three CdIIions are connected by four carboxylate groups and four trz−ligands to form a linear trinuclear [Cd3(COO)4(trz)4] cluster, as do the other three CdIIions. Two Cd3clusters are linked by trz−ligands in a μ1,2,4-bridging mode to produce a two-dimensional CdII–triazolate layer with (6,3) topology in theabplane. These two-dimensional layers are further pillared by theL2−ligands along thecaxis to generate a complicated three-dimensional framework. Topologically, regarding the Cd3cluster as an 8-connected node, the whole architecture of (I) is a uninodal 8-connectedlszframework with the Schläfli symbol (422·66). Complex (I) was further characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction, thermogravimetric analysis and a photoluminescence study. MOF (I) has a high thermal and water stability.

Two luminescent transition-metal–organic frameworks with a predesigned ligand as highly sensitive and selective iron(iii) sensors

The water-stable imidazole dicarboxylated-based MOFs are excellent luminescent probes for the Fe³⁺ ion in an aqueous solution.

Three new Zn-based metal–organic frameworks exhibiting selective fluorescence sensing and photocatalytic activity

Three MOFs with different 2D networks have been crystallised in a one-pot solvothermal reaction. They all display high sensitivity in the detection of ACE and relatively good photocatalytic activity in the degradation of RhB.

A multifunctional MOF as a recyclable catalyst for the fixation of CO2 with aziridines or epoxides and as a luminescent probe of Cr(vi)

A multifunctional metal-organic framework (1) can serve as an efficient and recyclable catalysts for the conversion of CO₂ with aziridines or epoxides. Furthermore, the material can also act as a recyclable luminescent probe for Cr(vi) species among twenty anions.

A new three-dimensional zinc-based metal-organic framework as a fluorescent sensor for detection of cadmium ion and nitrobenzene

In this study, a novel three-dimensional zinc-based metal-organic framework (Zn-MOF), i.e., {Zn₂(L)₂(DMF)₂H₂O}_n (L = 2,5-bis(phenylamino)-1,4-benzenedicarboxylic acid) was designed and developed under solvothermal condition. As a proof-of-principle, a π-conjugated framework of carboxylate ligand capable of "bottom up" synthesis was integrated with metal ion to construct a novel MOF for sensing applications. As expected, the synthesized Zn-MOF exhibited fluorescence enhancement for cadmium ion (Cd²⁺) and sensing of nitrobenzene (NB) through fluorescence quenching. The detection limits were calculated to be 0.12 μM for Cd²⁺ and 1.19 μg mL^-1 for NB based on signal-to-noise ratio of 3:1. Moreover, various techniques and density functional theory investigations verified that the possible sensing mechanisms for Cd²⁺ and NB included ion exchange and photoinduced electron transfer, respectively. Finally, their practical applications on real samples also demonstrated that the Zn-MOF-based sensor can be effectively utilized for detection and imaging of Cd²⁺ present in the real water samples and living cells. This study may inspire future research and design of target fluorescent MOFs with specific functions.

Ultrasonic assisted synthesis of a tetrazine functionalized MOF and its application in colorimetric detection of phenylhydrazine

TMU-34(-2H), [Zn(OBA)(DPT)_0.5].DMF, has been sonochemically synthesized by applying H₂OBA, (4,4'-oxybis(benzoic acid)), as the dicarboxylate linker, and DPT, (3,6-di(pyridin-4-yl)-1,2,4,5-tetrazine), as pillar spacer. Sonication time, concentration of initial reagents, sonication power and molar ratio of pyridine as modulator has been optimized to synthesize nano powder of TMU-34(-2H) including uniform plate morphology. Nano TMU-34(-2H), can detect phenylhydrazine (PH) by color changing from pink to deep purple. As a comparison, nano and crystal samples of TMU-34(-2H) were treated to detect PH. Experiments show that nano TMU-34(-2H) has better detection limit and response time.

Six new coordination compounds based on rigid 5-(3-carboxy-phenyl)-pyridine-2-carboxylic acid: synthesis, structural variations and properties

Compounds 1–6 have rich structural chemistry ranging from mononuclear (1 and 2), one-dimensional (3 and 4), two-dimensional (5) to three-dimensional (6) structures.

A multi-responsive luminescent sensor for organic small-molecule pollutants and metal ions based on a 4d–4f metal–organic framework

A multi-responsive luminescent sensor for organic small-molecule pollutants and metal ions based on a metal–organic framework is reported.

Crystal structure and fluorescence properties of catena-poly[[(2,2'-bi-1H-imidazole-κ2N,N')cadmium]-di-μ-chlorido]

In the polymeric title compound, [CdCl2(C6H6N4)] n , the central CdII atom is coordinated by four chloride ligands and two N atoms from a chelating 2,2'-bi-1H-imidazole mol-ecule, leading to a distorted octa-hedral Cl4N2 coordination set. As a result of the μ2-bridging character of the Cl ligands, chains parallel to the c axis are formed, with the chelating 2,2'-bi-1H-imidazole ligands decorated on both sides of the chain. The luminescence properties of the complex dispersed in di-methyl-formamide shows that the emission intensities are significantly quenched by nitro-benzene.

A zwitterionic 1D/2D polymer co-crystal and its polymorphic sub-components: a highly selective sensing platform for HIV ds-DNA sequences

Polymorphic compounds {[Cu(dcbb)₂(H₂O)₂]·10H₂O}_n (2, 1D chain), [Cu(dcbb)₂]_n (3, 2D layer) and their co-crystal {[Cu(dcbb)₂(H₂O)][Cu(dcbb)₂]₂}_n (4) have been prepared from the reaction of [Na(dcbb)(H₂O)]_n (1) with Cu(NO₃)₂·3H₂O at different temperatures.

An unusual (4,4)-connected 3D porous cadmium metal–organic framework as a luminescent sensor for detection of nitrobenzene

The MOF 1 shows an unusual (4,4)-connected 3D porous network. The high quenching efficiency of 1 is up to 98.2% at 160 ppm NBZ. 1 displays highly selectivity, sensitivity and recyclability in the detection of nitrobenzene.

Highly sensitive and selective fluorescent probes for Hg2+ in Ag(i)/Cu(ii) 3D supramolecular architectures based on noncovalent interactions

Three novel Ag(i)/Cu(ii) metal–organic assemblies displayed 3D supramolecular architectures with the help of noncovalent interactions. 1 performs as a highly sensitive and selective fluorescent probe for Hg²⁺, and 2 shows a unique semiconductive nature.