Functional food microstructures for macronutrient release and delivery

Advances of protein-based emulsion gels as fat analogues: Systematic classification, formation mechanism, and food application

Fat plays a pivotal role in the appearance, flavor, texture, and palatability of food. However, excessive fat consumption poses a significant risk for chronic ailments such as obesity, hypercholesterolemia, and cardiovascular disease. Therefore, the development of green, healthy, and stable protein-based emulsion gel as an alternative to traditional fats represents a novel approach to designing low-fat food. This paper reviews the emulsification behavior of proteins from different sources to gain a comprehensive understanding of their potential in the development of emulsion gels with fat-analog properties. It further investigates the emulsifying potential of protein combined with diverse substances. Then, the mechanisms of protein-stabilized emulsion gels with fat-analog properties are discussed, mainly involving single proteins, proteins-polysaccharides, as well as proteins-polyphenols. Moreover, the potential applications of protein emulsion gels as fat analogues in the food industry are also encompassed. By combining natural proteins with other components such as polysaccharides, polyphenols, or biopolymers, it is possible to enhance the stability of the emulsion gels and improve its fat-analog texture properties. In addition to their advantages in protecting oil oxidation, limiting hydrogenated oil intake, and delivering bioactive substances, protein-based emulsion gels have potential in food 3D printing and the development of specialty fats for plant-based meat.

Microscopic Imaging to Visualize the Distribution of Dietary Nucleic Acids in Food Products of Various Origins

Dietary nucleic acids (dietNAs) are being increasingly recognized as important food components with nutritional value. However, the precise dietary recommendations for dietNAs are limited, because established methods for determining the quantity and nutritional role of dietNAs are still lacking. One of the tools to narrow this gap could be microscopic imaging, as a convenient approach to visualize the abundance and distribution of dietNAs in food products. With the aid of appropriate bioinformatic elaboration, such images may in future enable the direct semiquantitative estimation of these macromolecules in food products. In the presented study, two methods of preparing microscopic sections and staining them with DNA-specific fluorochromes were used for microscopic imaging of dietNAs in food products of plant and animal origin. Procedures for preparing formalin-fixed paraffin-embedded sections and cryosections were compared in terms of their usefulness for routine food analysis. Both methods turned out equally suitable for visualizing dietNA distribution in animal and plant products. However, the use of cryosections allowed a significantly shorter analysis time and reduced the consumption of organic solvents. Both of these advantages make the cryosection method preferable while establishing a dedicated methodology for routine assessment of dietNAs in the food industry.

Application of Curcumin Emulsion Carrier from Ultrasonic-Assisted Prepared Octenyl Succinic Anhydride Rice Starch

The emulsification of ultrasonic-assisted prepared octenyl succinic anhydride (OSA) rice starch on curcumin was investigated in the present study. The results indicated that the encapsulation efficiency of curcumin in emulsions stabilized by OSA-ultrasonic treatment rice starch was improved, from 81.65 ± 0.14% to 89.03 ± 0.09%. During the in vitro oral digestion, the particle size and Zeta potential of the curcumin emulsion did not change significantly (p > 0.05). During the in vitro digestive stage of the stomach and small intestine, the particle size of the curcumin emulsion continued to increase, and the absolute potential continued to decrease. Our work showed that OSA-pre-treatment ultrasonic rice starch could improve curcumin bioavailability by increasing the encapsulation efficiency with stronger stability to avoid the attack of enzymes and high intensity ion, providing a way to develop new emulsion-based delivery systems for bioactive lipophilic compounds using OSA starch.

Application of Nanomicelles in Enhancing Bioavailability and Biological Efficacy of Bioactive Nutrients

Nutraceuticals provide many biological benefits besides their basic nutritional value. However, their biological efficacies are often limited by poor absorption and low bioavailability. Nanomaterials have received much attention as potential delivery systems of nutrients and phytonutrients for multiple applications. Nanomicelles are nanosized colloidal structures with a hydrophobic core and hydrophilic shell. Due to their unique characteristics, they have shown great perspectives in food and nutraceutical science. In this review, we discussed the unique properties of nanomicelles. We also emphasized the latest advances on the design of different nanomicelles for efficient delivery and improved bioavailability of various nutrients. The role of nanomicelles in the efficacy improvement of bioactive components from nutraceutical and health foods has been included. Importantly, the safety concerns on nano-processed food products were highlighted.

Milk Protein-Based Nanohydrogels: Current Status and Applications

Milk proteins are excellent biomaterials for the modification and formulation of food structures as they have good nutritional value; are biodegradable and biocompatible; are regarded as safe for human consumption; possess valuable physical, chemical, and biological functionalities. Hydrogels are three-dimensional, cross-linked networks of polymers capable of absorbing large amounts of water and biological fluids without dissolving and have attained great attraction from researchers due to their small size and high efficiency. Gelation is the primary technique used to synthesize milk protein nanohydrogels, whereas the denaturation, aggregation, and gelation of proteins are of specific significance toward assembling novel nanostructures such as nanohydrogels with various possible applications. These are synthesized by either chemical cross-linking achieved through covalent bonds or physical cross-linking via noncovalent bonds. Milk-protein-based gelling systems can play a variety of functions such as in food nutrition and health, food engineering and processing, and food safety. Therefore, this review highlights the method to prepare milk protein nanohydrogel and its diverse applications in the food industry.

Designing food for the elderly: the critical impact of food structure

Ageing is an unavoidable progressive process causing many changes of the individual life. However, if faced in an efficient way, living longer in a healthy status could be an opportunity for all. In this context, food consumption and dietary patterns are pivotal factors in promoting active and healthy ageing. The development of food products tailored for the specific needs of the elderly might favour the fulfilment of nutritionally balanced diets, while reducing the consequences of malnutrition. To this aim, the application of a food structure design approach could be particularly profitable, being food structure responsible to the final functionalities of food products. In this narrative review, the physiological changes associated to food consumption occurring during ageing were firstly discussed. Then, the focus shifted to the possible role of food structure in delivering target functionalities, considering food acceptability, digestion of the nutrients, bioactive molecules and probiotic bacteria.

Engineering Emulsion Gels as Functional Colloids Emphasizing Food Applications: A Review

Gels are functional materials with well-defined structures (three-dimensional networks) assembled from the dispersed colloids, and capable of containing a large amount of water, oil, or air (by replacing the liquid within the gel pores), known as a hydrogel, oleogel, and aerogel, respectively. An emulsion gel is a gelled matrix filled with emulsion dispersion in which at least one phase, either continuous phase or dispersed phase forms spatial networks leading to the formation of a semisolid texture. Recently, the interest in the application of gels as functional colloids has attracted great attention in the food industry due to their tunable morphology and microstructure, promising physicochemical, mechanical, and functional properties, and superior stability, as well as controlled release, features for the encapsulated bioactive compounds. This article covers recent research progress on functional colloids (emulsion gels), including their fabrication, classification (protein-, polysaccharide-, and mixed emulsion gels), and properties specifically those related to the gel-body interactions (texture perception, digestion, and absorption), and industrial applications. The emerging applications, including encapsulation and controlled release, texture design and modification, fat replacement, and probiotics delivery are summarized. A summary of future perspectives to promote emulsion gels' use as functional colloids and delivery systems for scouting potential new applications in the food industry is also proposed. Emulsion gels are promising colloids being used to tailor breakdown behavior and sensory perception of food, as well as for the processing, transportation, and targeted release of food additives, functional ingredients, and bioactive substances with flexibility in designing structural and functional parameters.

Quinoa flour as a skim milk powder replacer in concentrated yogurts: Effect on their physicochemical, technological, and sensory properties

Milk standardization with solids (i.e., nonfat milk solids, MSNF) for yogurt manufacture is traditionally achieved by the addition of skim milk powder (SMP). However, the addition of SMP to milk‐based yogurt increases lactose content and decreases both protein content and gel firmness. Thus, in this work, quinoa flour (QF; 0%, 25%, 50%, 75%, and 100% w/w) was used to replace SMP in concentrated yogurt. The physicochemical, textural, and sensory properties and microstructure of the yogurt were evaluated during cold storage. Generally, protein content, water‐holding capacity, and L* value decreased, while syneresis, textural attributes, and viscosity increased with increasing QF content. The substitution of high levels of QF (>25%, w/w) for SMP led to significantly shorter fermentation times, as compared to the control sample. The scanning electron microscopy observations showed significant changes in the yogurt microstructure as a consequence of QF replacement. Samples with 25% (w/w) substitution of QF and control had the highest scores in overall acceptance. According to the results, QF could be applied as an interesting raw material for concentrating the milk‐based yogurt at substitution level of 25% (w/w).

Starch structure and nutritional functionality - Past revelations and future prospects

Starch exists naturally as insoluble semi-crystalline granules assembled by amylose and amylopectin. Acknowledging the pioneers, we have reviewed the major accomplishments in the area of starch structure from the early 18th century and further established the relation of starch structure to nutritional functionality. Although a huge array of work is reported in the area, the review identified that some features of starch are still not fully understood and needs further elucidation. With the rise of diet-related diseases, it has never been more important to understand starch structure and use that knowledge to improve the nutritional value of the world's principal energy source.

Structuring of Edible Liquid Oil into Smart Thermo-Triggered Soft Matters for Controlled Bioactive Delivery

Growing interest is being dedicated to smart soft matters because of their potential in controlling bioactives upon exposure to an appropriate stimulus. Herein, structuring of edible liquid oil into oleogels and emulgels as smart thermo-triggered soft vehicles for controllable release of diverse nutrients was developed. Edible liquid oil was trapped inside the crystal network structure of phytosterols and monoglycerides resulting in bicomponent solidlike oleogels. Subsequently, both water-in-oleogel (W/O) emulgels and glycerol-in-oleogel (G/O) emulgels were further fabricated by spatial distribution of the stabilizing interfacial crystals around dispersed droplets as well as the network crystals in the continuous phase. Rheological measurements showed that the gel strength of the oleogel-based emulgels depends on the fraction of the aqueous phase and is greater than that of corresponding oleogels due to a filler effect of dispersed aqueous droplets within the crystal network, offering an additional strategy to tune the structure and rheology. Comparatively, introducing glycerol endowed a higher gel strength for the oleogel-based emulgels than water, particularly at increased filler loads. In addition, these soft matters exhibited interesting thermoresponsive nature, which exhibit the flexibility for programmed release of coencapsulated bioactive components upon exposure to an appropriate thermal triggered switchable. The resulted smart thermo-triggered soft matters have emerging opportunities for application in functional active ingredient delivery by on-demand strategies.

Effects of salt and heat treatment on the physicochemical properties, microstructure, secondary structure, and simulated in vitro gastrointestinal digestion of duck egg white

BACKGROUND

The texture and structure of the duck egg white (DEW) gel under salt and heat treatment are crucial to its digestibility. Specifically, the structural changes of food protein gels have been recognized for their potential to regulate in vitro digestion. In this study, the effects of gel characteristics and simulated in vitro gastrointestinal digestion of DEW under combined salt and heat treatment were investigated.

RESULTS

With the increase in salting time and temperature, a porous opaque gel with large particles was formed, the moisture content of DEW showed a downward trend, and the same was true for hardness changes. The microstructure suggested that, with the penetration of NaCl, DEW proteins were denatured, and the protein molecules gradually unfolded and then aggregated after 7 days. The secondary structure revealed that, as the salting time and temperature increased, the proportion of intermolecular β-sheets and α-helices decreased. In terms of in vitro digestion, the highest digestibility was obtained at 14 days of salting combined with 100 °C heat treatment, and the digestibility was the lowest when marinated for 7 days at 121 °C. Liquid chromatography and tandem mass spectrometry (LC-MS/MS) indicated that the number of different types of peptides and specific peptides was positively correlated with the salting time and temperature of the DEW at the end of gastric digestion.

CONCLUSIONS

Heat treatment at 100 °C has a higher in vitro digestibility than at 121 °C. Gels with low hardness, large pores, and rough textures are easier to digest by pepsin and release more peptides. © 2021 Society of Chemical Industry.

Effect of processing technologies on the digestibility of egg proteins

Egg and egg products are a rich source of highly bioavailable animal proteins. Several processing technologies can affect the structural and functional properties of these proteins differently and can influence their fate inside the gastrointestinal tract. The present review examines some of the processing technologies for improving egg protein digestibility and discusses how different processing conditions affect the digestibility of egg proteins under gastrointestinal digestion environments. To provide up-to-date information, most of the studies included in this review have been published in the last 5 years on different aspects of egg protein digestibility. Digestibility of egg proteins can be improved by employing some processing technologies that are able to improve the susceptibility of egg proteins to gastrointestinal proteases. Processing technologies, such as pulsed electric field, high-pressure, and ultrasound, can induce conformational and microstructural changes that lead to unfolding of the polypeptides and expose active sites for further interactions. These changes can enhance the accessibility of digestive proteases to cleavage sites. Some of these technologies may inactivate some egg proteins that are enzyme inhibitors, such as trypsin inhibitors. The underlying mechanisms of how different technologies mediate the egg protein digestibility have been discussed in detail. The proteolysis patterns and digestibility of the processed egg proteins are not always predictable and depends on the processing conditions. Empirical input is required to tailor the optimization of processing conditions for favorable effects on protein digestibility.

Construction of lipid layer and monitoring its digestion by optical interferometry

A method for real-time monitoring of lipid digestion based on photonic crystals formed from silica was developed. As an effective "net", the highly ordered silica colloidal crystal (SCC) film provides structural support for lipid payload. This method based on optical interferometric film kinetics was used to record the whole kinetics progress of olive oil hydrolysis by lipase in real time and calculate the kinetic Michaelis constant. The kinetic parameters were compared with the results determined by the titration method. The effects of bile salt content on lipase and olive oil layer were studied. This method provides a potential evaluation system for real-time digestion and degradation of edible oil in the food field. It also provides a basis for further real-time evaluation of lipid bioavailability in food systems by real-time recording the release and degradation of lipids in the food nano-matrix.

Influence of food matrix and food processing on the chemical interaction and bioaccessibility of dietary phytochemicals: A review

Consumption of phytochemicals-rich foods shows the health effect on some chronic diseases. However, the bioaccessibility of these phytochemicals is extremely low, and they are often consumed in the diet along with the food matrix. The food matrix can be described as a complex assembly of various physical and chemical interactions that take place between the compounds present in the food. Some studies indicated that the physiological response and the health benefits of phytochemicals are resultant in these interactions. Some food substrates inhibit the absorption of phytochemicals via this interaction. Moreover, processing technologies have been developed to facilitate the release and/or to increase the accessibility of phytochemicals in plants or breakdown of the food matrix. Food processing processes may disrupt the activity of phytochemicals or reduce bioaccessibility. Enhancement of functional and sensorial attributes of phytochemicals in the daily diet may be achieved by modifying the food matrix and food processing in appropriate ways. Therefore, this review concisely elaborated on the mechanism and the influence of food matrix in different parts of the digestive tract in the human body, the chemical interaction between phytochemicals and other compounds in a food matrix, and the various food processing technologies on the bioaccessibility and chemical interaction of dietary phytochemicals. Moreover, the enhancing of phytochemical bioaccessibility through food matrix design and the positive/negative of food processing for dietary phytochemicals was also discussed in this study.

Effect of glycation degree on the in vitro simulated gastrointestinal digestion: A promising formulation for egg white gel with controlled digestibility

The mechanism between food gelation and its digestibility has attracted increasing attention over the past few decades. This study aimed to evaluate the effect of glycation degree on the gelation and digestibility of egg white gel (EWG) using an in vitro model and a multi-scale characterization of gel structure. Results showed that EWG glycated with increasing d-ribose by covalent bonds exhibited better gelling properties and lower in vitro digestibility according to the appearance of soluble proteins and peptides. Besides, glycation preference for ovotransferrin at lysine might be important for regulating gel structure and proteolysis accessibility via the ratio of fibrous and granular aggregates. Moreover, gel structure was predominant over amino acids modification for digestibility. Binding disorder and steric hindrance could ascribe to the lower digestibility of gels. These findings are enlightening for the formulation and production of food matrix with controlled digestibility through glycation in food and related pharmaceutical fields.

Connecting primitive phase separation to biotechnology, synthetic biology, and engineering

One aspect of the study of the origins of life focuses on how primitive chemistries assembled into the first cells on Earth and how these primitive cells evolved into modern cells. Membraneless droplets generated from liquid-liquid phase separation (LLPS) are one potential primitive cell-like compartment; current research in origins of life includes study of the structure, function, and evolution of such systems. However, the goal of primitive LLPS research is not simply curiosity or striving to understand one of life's biggest unanswered questions, but also the possibility to discover functions or structures useful for application in the modern day. Many applicational fields, including biotechnology, synthetic biology, and engineering, utilize similar phaseseparated structures to accomplish specific functions afforded by LLPS. Here, we briefly review LLPS applied to primitive compartment research and then present some examples of LLPS applied to biomolecule purification, drug delivery, artificial cell construction, waste and pollution management, and flavor encapsulation. Due to a significant focus on similar functions and structures, there appears to be much for origins of life researchers to learn from those working on LLPS in applicational fields, and vice versa, and we hope that such researchers can start meaningful cross-disciplinary collaborations in the future.

Benefits of pH-responsive polyelectrolyte coatings for carboxymethyl cellulose-based microparticles in the controlled release of esculin

Moderate and prolonged payload release in response to a particular factor is highly demanded for efficient carriers of low-molecular-weight, chemically unstable phytopharmaceuticals. Thus, the objective of our contribution was to establish the effect of pH-responsive polyelectrolyte coatings on the release properties of carboxymethyl cellulose-based microparticles designed to deliver phytopharmaceuticals through the gastrointestinal tract. Microparticles were fabricated via extrusion coupled with external gelation and further coated with polyelectrolytes (PEs) (chitosan, gelatin, or PAH and PSS) involving electrostatic interactions. Successful deposition of PEs was confirmed by FTIR, and their thickness and viscosity were characterized in terms of QCM-D and ellipsometric techniques. The encapsulation efficiency of esculin, used as a model phytopharmaceutical, as proven by UV-Vis studies, was over 57%. SEM and fluorescence microscopy revealed a micrometric size, a mostly spherical shape and an altered topography of the investigated microcapsules. The physical stability of the microcapsules in media of various pH values was confirmed with CLSM and gravimetric studies. Studies on human gingival fibroblasts in vitro revealed that the obtained microparticles did not induce any cytotoxic effects. Payload release was monitored in situ by means of CLSM and ex situ under gastrointestinal conditions in vitro. Mathematical evaluation of the microparticle release profiles using classical models led to the establishment of a new hybrid model that revealed the mechanism behind esculin release. We demonstrated that the application of a polyelectrolyte shell onto CMC-based microspheres may provide controlled delivery of the payload, with its release triggered by the pH and ionic strength of the medium. These observations suggest that the release manner of small-molecule glycosides under gastrointestinal conditions can be tailored by careful selection of suitable materials to obtain biocompatible and functional hydrogel microparticles.

Encapsulation of Bifidobacterium BB12® in alginate-jaboticaba peel blend increases encapsulation efficiency and bacterial survival under adverse conditions

Most foods with probiotics claims are associated to dairy products, whose consumption is restricted to part of the population, creating a favorable scenario for the development of probiotic foods in alternative matrices. However, the development of probiotic foods in non-dairy matrices is still a technological challenge, since the foods intrinsic parameters can cause injuries to microorganisms. An alternative to protect the microbial cells in adverse environments involves encapsulation. Therefore, the objective of this study was to evaluate the influence of alginate-jaboticaba peel blend in the improvement of encapsulation efficiency, viability maintenance, and cell survival of Bifidobacterium BB12® under simulated gastrointestinal digestion and after incorporating in traditional jaboticaba jam. The particles were obtained by ion gelling technique using alginate with or without powdered jaboticaba peel. The addition of jaboticaba peel in particles improved encapsulation efficiency (> 90%) and resulted in higher cell survival in simulated gastrointestinal digestion. During storage in jam, the loss in cell viability was approximately constant: c.a. 0.5 log CFU/g/day for encapsulated cells and c.a. 1.0 log CFU/g/day for free cells. These results suggest that use of alginate and powdered jaboticaba peel blend is a promising approach to protect Bifidobacterium BB12® against adverse environments, such as non-dairy food matrices. KEY POINTS: • Powdered jaboticaba peel increased the encapsulation efficiency in alginate particles. • Encapsulation improved cell survival under adverse conditions. • Useful approach for the development of non-conventional probiotic products. Graphical abstract.

Physical chemistry of gastric digestion of proteins gels

In this paper, we present the rich physics and chemistry of the gastric digestion of protein gels. Knowledge of this matter is important for the development of sustainable protein foods that are based on novel proteins sources like plant proteins or insects. Their digestibility is an important question in the design of these new protein foods. As polyelectrolyte gels, they can undergo volume changes upon shifts in pH or ionic strengths, as protein gels experience when entering the gastric environment. We show that these volume changes can be modelled using the Flory-Rehner theory, combined with Gibbs-Donnan theory accounting for the distribution of electrolytes over gel and bath. In-vitro experiments of soy protein gels in simulated gastric fluid indeed show intricate swelling behaviour, at first the gels show swelling but at longer times they shrink again. Simulations performed with the Flory-Rehner/Gibbs-Donnan theory reproduce qualitatively similar behaviour. In the final part of the paper, we discuss how the model must be extended to model realistic conditions existing in the in-vivo gastric environment.

Latest advances in imaging techniques for characterizing soft, multiphasic food materials

Over the last two decades, the development and production of innovative, customer-tailored food products with enhanced health benefits have seen major advances. However, the manufacture of edible materials with tuned physical and organoleptic properties requires a good knowledge of food microstructure and its relationship to the macroscopic properties of the final food product. Food products are complex materials, often consisting of multiple phases. Furthermore, each phase usually contains a variety of biological macromolecules, such as carbohydrates, proteins and lipids, as well as water droplets and gas bubbles. Micronutrients, such as vitamins and minerals, might also play an important role in determining and engineering food microstructure. Considering this complexity, highly advanced physio-chemical techniques are required for characterizing the microstructure of food systems prior to, during and after processing. Fast, in situ techniques are also essential for industrial applications. Due to the wide variety of instruments and methods, the scope of this paper is focused only on the latest advances of selected food characterization techniques, with emphasis on soft, multi-phasic food materials.

Vitamin D microencapsulation and fortification: Trends and technologies

Today, as per the latest medical reports available, majority of the population throughout globe is facing vitamin D (Vit D) deficiency. Even in sub-tropical countries like India and many others Vit D deficiency is highly prevalent despite the exuberant available sunshine (a major source of Vit D) throughtout the year. The reason could be attributed to an array of factors including socioeconomical, cultural and religious. Further, other than the sunlight, there are very limited sources of Vit D to fulfil the recommended dietary allowance of Vit D (RDA: 400-800 IU per day). A large proportion of Vit D is lost during food processing and storage due to environmental stress conditions such as temperature, pH, salt, oxygen and light. Vita D, an important micronutrient, is essentially required for the prevention of disorders such as neurodegenerative diseases, cardiovascular diseases, cancer etc. in addition to its traditional role in bone metabolism. Therefore, in order to meet the daily requirements of Vit D for human body, WHO has recognized fortification as the most efficient and safest method to address malnutrition. But there are innumerable chellenges involved during food fortification using Vit D as fortificants such as homogeneity into the food matrix, physico-chemical/photochemical degradation, loss during processing and storage, interactions with other components of food matrix resulting into change in taste, texture and appearance thus affecting acceptability, palatability and marketability. Fortification of Vit D into food products especially the ones which have an aqueous portion, is not simple for food technologist. Recent advances in nanotechnology offer various microencapsulation techniques such as liposome, solid-lipid particles, nanostructured lipid carriers, emulsion, spray drying etc. which have been used to design efficient nanomaterials with desired functionality and have great potential for fortification of fortificants like Vit D. The present review is an undate on Vit D, in light of its fortification level, RDA, factors affecting its bioavailability and various microencapsulation techniques adopted to develop Vit D-nanomaterials and their fate in food fortification.

Impact of calcium levels on lipid digestion and nutraceutical bioaccessibility in nanoemulsion delivery systems studied using standardized INFOGEST digestion protocol

The bioaccessibility of hydrophobic bioactives may be greatly reduced in the presence of calcium.

Food Structure Development in Emulsion Systems

A number of food products exist, in part or entirely, as emulsions, while others are present in an emulsified state at some point during their production/formation. Mayonnaise, butter, margarine, salad dressing, whipped cream, and ice cream represent some of the typical examples of emulsion-based foods. Controlled by both formulation and processing aspects, the emulsion architecture that is formed ultimately determines many of the attributes of the final food product. This chapter initially provides an overview of the basic constituents of emulsions and their influence on the microstructure and stability of conventional as well as more complex systems. The available spectrum of processing routes and characterization techniques currently utilized (or emerging) within the area of emulsions is then discussed. The chapter concludes with a concise outline of the relationship between food emulsion microstructure design and its performance (textural, rheological, sensorial, etc.).

Reprint of "Postprandial lipemia and fecal fat excretion in rats is affected by the calcium content and type of milk fat present in Cheddar-type cheeses"

The aim of this study was to better understand the effect of calcium on the bioavailability of milk lipids from a cheese matrix using a rat model. Cheddar-type cheeses were manufactured with one of three types of anhydrous milk fat, control, olein or stearin, and salted with or without CaCl₂. The cheeses were fed to rats and postprandial lipemia was monitored. Feces were analyzed to quantify fatty acids excreted as calcium soaps. Higher calcium concentration in cheese caused a higher and faster triacylglycerol peak in blood, except for cheeses containing stearin. Furthermore, calcium soaps were more abundant in feces when the ingested cheese had been enriched with calcium and when the cheese was prepared with stearin. Increased lipid excretion was attributable to the affinity of saturated long-chain fatty acids for calcium. Results showed that lipid bioaccessibility can be regulated by calcium present in Cheddar cheese. This study highlights the nutritional interaction between calcium and lipids present in the dairy matrix and confirms its physiological repercussions on fatty acid bioavailability.

Effect of secondary heat-induced aggregation on pork meat batter protein conformation, hydration characteristics, textural quality and in vitro digestibility

SH has caused fierce aggregation and the conformation transition from α-helix to β-sheets, which resulted in the decrease of WHC, textural quality and in vitro digestibility.