Heparin-Based Hydrogel Micropatches with Human Adipose-Derived Stem Cells: A Promising Therapeutic Approach for Neuropathic Pain Relief

This study explores the therapeutic efficacy of heparin-based hydrogel micropatches containing human adipose-derived stem cells (hASCs) in treating neuropathic pain caused by nerve damage. Our results showed that hASCs exhibited neuroregenerative and pain-relieving effects when used with heparin-based hydrogel micropatches in the neuropathic pain animal model. The use of this combination also produced enhanced cell viability and nerve regeneration. We conducted various neurological behavioral tests, dynamic plantar tests, histological examinations, and neuroelectrophysiological examinations to confirm the therapeutic effect. Our findings suggest that this approach could maximize therapeutic efficacy and improve the quality of life for patients suffering from neuropathic pain.

Injectable hyaluronic acid hydrogel encapsulated with Si-based NiO nanoflower by visible light cross-linking: Its antibacterial applications

Bacterial infections have become a severe threat to human health and antibiotics have been developed to treat them. However, extensive use of antibiotics has led to multidrug-resistant bacteria and reduction of their therapeutic effects. An efficient solution may be localized application of antibiotics using a drug delivery system. For clinical application, they need to be biodegradable and should offer a prolonged antibacterial effect. In this study, a new injectable and visible-light-crosslinked hyaluronic acid (HA) hydrogel loaded with silicon (Si)-based nickel oxide (NiO) nanoflowers (Si@NiO) as an antibacterial scaffold was developed. Si@NiO nanoflowers were synthesized using chemical bath deposition before encapsulating them in the HA hydrogel under a mild visible-light-crosslinking conditions to generate a Si@NiO-hydrogel. Si@NiO synthesis was confirmed using scanning electron microscopy, transmission electron microscopy, and powder X-ray diffraction. As-prepared Si@NiO-hydrogel exhibited enhanced mechanical properties compared to a control bare hydrogel sample. Moreover, Si@NiO-hydrogel exhibits excellent antibacterial properties against three bacterial strains (P. aeruginosa, K. pneumoniae, and methicillin-resistant Staphylococcus aureus (>99.9% bactericidal rate)) and negligible cytotoxicity toward mouse embryonic fibroblasts. Therefore, Si@NiO-hydrogel has the potential for use in tissue engineering and biomedical applications owing to its injectability, visible-light crosslink ability, degradability, biosafety, and superior antibacterial property.

Biodegradable hyaluronic acid-based, nitric oxide-releasing nanofibers for potential wound healing applications

Nitric oxide (NO) is one of the smallest gas molecules with pharmaceutical and potential wound therapeutic effects due to its ability to regulate inflammation and eradicate bacterial infections. Recently, NO-releasing synthetic polymer-based nanofibers have become promising candidates for wound healing due to their facile functionalisation, tunable mechanical properties, and large effective surface areas. However, synthetic polymer-based nanofibers suffer from poor degradability in the physiological milieu, which restricts their use in in vivo applications. In this study, we developed biodegradable and nitric oxide-releasing nanofibers for potential wound healing applications. We synthesised dual-functionalised hyaluronic acid (HA) containing methacrylate groups and N-diazeniumdiolate (NONOate)-NO donor groups and capable of forming crosslinked, electrospun nanofibers, with an effective NO payload, through an electrospinning process and photoinitiated polymerisation. Nuclear magnetic resonance, Fourier transform infrared spectroscopy, and ultraviolet-visible spectroscopy confirmed the successful synthesis of the functionalised HA. Control over both the NO donor and HA concentrations allowed for the preparation of NO-releasing, HA-based nanofibers of varying diameters (240-490 nm), NO payloads (10-620 nmol mg^-1), maximum amounts of NO released (160-8920 ppb mg^-1), and NO release durations (1.5-20.2 h). Moreover, the NO-releasing nanofibers had good biodegradability and potential wound healing effects without any observed cytotoxicity. The biodegradable and NO-releasing HA-based nanofibers developed in this study have the potential application in wound healing.

Novel Metal-Organic Framework-Based Photocrosslinked Hydrogel System for Efficient Antibacterial Applications

Metal-organic frameworks (MOFs) can be applied in biology and medicine as drug delivery systems by carrying drugs on their surfaces or releasing bioactive ligands. To investigate the therapeutic potential of hydrogels that contain MOFs, three MOFs containing glutarate and 1,2-bis(4-pyridyl)ethylene ligands were synthesized by the previously reported hydrothermal or solvothermal reactions: Cu-MOF 1, Co-MOF 2, and Zn-MOF 3. Bioactive MOF-embedded hydrogels (hydrogel@Cu-MOF 1, hydrogel@Co-MOF 2, and hydrogel@Zn-MOF 3) were prepared by UV light-mediated thiol-ene photopolymerization using diacrylated polyethylene glycol (PEG), 4-arm-thiolated PEG, and MOFs. The activities of the MOF-embedded hydrogels were tested against the Gram-negative bacterium Escherichia coli and the Gram-positive bacterium Staphylococcus aureus. These MOF-embedded hydrogels were observed to be very stable, based on the release test of M^II ions, and both hydrogel@Cu-MOF 1 and hydrogel@Co-MOF 2 showed excellent antibacterial activity. Although, in human dermal fibroblasts, hydrogel@Cu-MOF 1 showed no cytotoxic effects, it exhibited 99.9% antibacterial effects at the minimum bactericidal concentration. Physical properties such as the surface area and dimension of MOFs with different central metals appeared to be more important than the chemical properties of the ligands in determining the effects on bacteria. These MOF-embedded hydrogels may be useful in antibacterial applications such as cosmetics, treatment of skin diseases, and drug delivery owing to their low cytotoxicity and high bactericidal activity.

The electrochemical fabrication of hydrogels: a short review

Electrochemical hydrogel fabrication is the process of preparing hydrogels directly on to an electrode surface. There are a variety of methods to fabricate hydrogels, which are specific to the type of gelator and the desired properties of the hydrogel. A range of analytical methods that can track this gelation and characterise the final properties are discussed in this short review.

A platform for light-controlled formation of free-stranding lipid membranes

The engineering of artificial cells is one of the most significant scientific challenges. Thus, controlled fabrication and in situ monitoring of biomimetic nanoscale objects are among the central issues in current science and technology. Studies of transmembrane channels and cell mechanics often require the formation of lipid bilayers (LBs), their modification and their transfer to a particular place. We present here a novel approach for remotely controlled manipulation of LBs. Layer-by-layer deposition of polyethyleneimine and poly(sodium 4-styrenesulfonate) on a nanostructured TiO 2 photoanode was performed to obtain a surface with the desired net charge and to enhance photocatalytic performance. The LB was deposited on top of a multi-layer positive polymer cushion by the dispersion of negative vesicles. The separation distance between the electrostatically linked polyelectrolyte cushion and the LB can be adjusted by changing the environmental pH, as zwitter-ionic lipid molecules undergo pH-triggered charge-shifting. Protons were generated remotely by photoanodic water decomposition on the TiO 2 surface under 365 nm illumination. The resulting pH gradient was characterized by scanning vibrating electrode and scanning ion-selective electrode techniques. The light-induced reversible detachment of the LB from the polymer-cushioned photoactive substrate was found to correlate with suggested impedance models.

Heparin-hyaluronic acid hydrogel in support of cellular activities of 3D encapsulated adipose derived stem cells

We have developed stem cell-responsive, heparin-hyaluronic acid (Hep-HA) hydrogel, crosslinked by thiolated heparin (Hep-SH) and methacrylated hyaluronic acid (HA-MA) via visible light mediated, thiol-ene reaction. Physical properties of the hydrogel (gelation time, storage modulus, and swelling ratio) were tunable by adjusting light intensity, initiator/polymer concentration, and precursor pH. Culture of human adipose derived mesenchymal stem cells (ADSCs) using this hydrogel was characterized and compared with the control hydrogels including Hep-PEG hydrogel, PEG-HA hydrogel. Sufficient initial adhesion and continuous proliferation of ADSCs in 2D were observed on both heparin-containing hydrogels (Hep-HA and Hep-PEG hydrogel) in contrast to no adhesion of ADSCs on PEG-HA hydrogel. On the other hand, in the case of 3D culture of encapsulated ADSCs, efficient cellular activities such as spreading, proliferation, migration, and differentiation of ADSCs were only observed in soft Hep-HA hydrogel compared to Hep-PEG or PEG-HA hydrogel with the similar modulus. The upregulated expressions of hyaluronidases in ADSCs encapsulated in Hep-HA hydrogel compared to the control hydrogels and effective degradation of the hydrogel by hyaluronidase imply that the degradation of hydrogel was necessary for 3D cellular activities. Thus, Hep-HA hydrogel, where heparin acts as a binding domain for ADSCs and HA acts as a degradation site by cell secreted enzymes, was efficient for 3D culture of human ADSCs without any additional modification using biological/chemical molecules.

STATEMENT OF SIGNIFICANCE

Stem cell-responsive hydrogel composed of heparin and hyaluronic acid was prepared by visible light-mediated thiol-ene reaction. Without additional modification using functional peptides for cell adhesion and matrix degradation, ADSCs encapsulated in this hydrogel showed efficient cellular activities such as spreading, proliferation, migration, and differentiation of ADSCs whereas control hydrogels missing heparin or hyaluronic acid could not support cellular activities in 3D. In this hydrogel, heparin mainly acts as a binding domain for stem cells and hyaluronic acid mainly acts as a degradation site by ADSC secreted enzymes, but interrelated synergistic functions of heparin and HA were observed. Therefore, we speculate that this hydrogel can serve as a promising carrier for stem cell based therapy and various tissue engineering applications.

Heparin-immobilized gold-assisted controlled release of growth factors via electrochemical modulation

Electrochemically-controlled release of bFGF using heparin-immobilized gold via different types of mechanisms (desorption of thiols from gold and modulation of specific interaction between heparin and bFGF) and its biocompatibility.