Nanocomposite Based on HA/PVTMS/Cl2FeH8O4 as a Gas and Temperature Sensor

In this paper, a novel nanocrystalline composite material of hydroxyapatite (HA)/polyvinyltrimethoxysilane (PVTMS)/iron(II)chloride tetrahydrate (Cl₂FeH₈-O₄) with hexagonal structure is proposed for the fabrication of a gas/temperature sensor. Taking into account the sensitivity of HA to high temperatures, to prevent the collapse and breakdown of bonds and the leakage of volatiles without damaging the composite structure, a freeze-drying machine is designed and fabricated. X-ray diffraction, FTIR, SEM, EDAX, TEM, absorption and photoluminescence analyses of composite are studied. XRD is used to confirm the material structure and the crystallite size of the composite is calculated by the Monshi-Scherrer method, and a value of 81.60 ± 0.06 nm is obtained. The influence of the oxygen environment on the absorption and photoluminescence measurements of the composite and the influence of vaporized ethanol, N₂ and CO on the SiO₂/composite/Ag sensor device are investigated. The sensor with a 30 nm-thick layer of composite shows the highest response to vaporized ethanol, N₂ and ambient CO. Overall, the composite and sensor exhibit a good selectivity to oxygen, vaporized ethanol, N₂ and CO environments.

Coupled effect of particle size of the source materials and calcination temperature on the direct synthesis of hydroxyapatite

We report the effect of controlled particle size (obtained by using 80, 100, 120, 140 and 200 mesh) of the source materials on the synthesis of a well-known biomaterial, hydroxyapatite (Hap). In addition to this, we have also mapped the consequence of applied temperature (700°C, 800°C and 900°C) on the crystallographic properties and phase composition of the obtained Hap. Nevertheless, although with Hap, in each case, β-tricalcium phosphate (β-TCP) was registered as the secondary phase the ANOVA test revealed that the results of the crystallographic parameters are significantly different for the applied sintering temperature 700°C and 800°C (p < 0.05), while the data obtained for calcination temperature 800°C are not significantly different from that acquired at 900°C (p > 0.05). Fourier transform infrared spectrophotometer data ensured that, irrespective of mesh size and calcination temperature, the synthesized Hap samples were of carbonated apatite with B-type substitution. Interestingly, for all cases, the % of carbonate content was below the maximum limit (8%) of theCO 3 2 - ion present in bone tissue hydroxyapatite.

Room-Temperature Ammonia Gas Sensing Using Mixed-Valent CuCo2O4 Nanoplatelets: Performance Enhancement through Stoichiometry Control

We report the sensing properties of an interesting ternary oxide CuCo₂O₄ (CCO) which comprises two earth-abundant transition elements, both capable of supporting multiple valence states. We have used a synthesis protocol, which renders unique nanoplatelet-type morphology but with a degree of biphasic character (CuO as a secondary phase in addition to the defect-spinel Cu_1-x Co₂O₄). This sample constitution can be controlled through the use of cation off-stoichiometry, and the same also influence the sensing response significantly. In particular, a Co 10 at. % excess CCO (CCO-Co(10)) case exhibits a good response (∼7.9% at 400 ppm) for NH₃ gas with a complete recovery at room temperature (23 °C, ±1 °C) in 57% RH. The material performance was investigated for other gases such as H₂S, NO₂, and CO. A good response is observed for H₂S and NO₂ gases but without a recovery; however, for CO, a poor response is noted. Herein, we discuss the specific results for ammonia sensing for the CCO-Co(10) case in detail via the use of different characterizations and outline the difference between the cases of the single-phase defect-stabilized material versus nonpercolating biphasic material.

Improved Cl2 sensing characteristics of reduced graphene oxide when decorated with copper phthalocyanine nanoflowers

A novel gas sensing platform involving a hybrid of reduced graphene oxide (rGO) sheets with unsubstituted copper phthalocyanine (CuPc) nanoflowers has been explored as a room temperature ppb level chemiresistive chlorine (Cl₂) sensor with a detection limit as low as 1.97 ppb.

Acidithiobacillus ferrooxidans improved H2S gas sensing properties of tubular hydroxyapatite at room temperature

H₂S gas sensing properties of HAp was significantly improved by mixing with Acidithiobacillus ferrooxidans.

Facile fabrication of silk protein sericin-mediated hierarchical hydroxyapatite-based bio-hybrid architectures: excellent adsorption of toxic heavy metals and hazardous dye from wastewater

Facilely fabricated silk protein sericin-mediated hierarchical hydroxyapatite hybrid architectures show excellent adsorption of toxic heavy metal ions of Pb(ii), Cd(ii) and Hg(ii) and a hazardous dye, Congo red (CR), from wastewater.