Nanostructuring with chirality: binaphthyl-based synthons for the production of functional oriented nanomaterials

2,2'-Tethered Binaphthyl-Embedded One-Handed Helical Ladder Polymers: Impact of the Tether Length on Helical Geometry and Chiroptical Property

Synthetic breakthroughs diversify the molecules and polymers available to chemists. We now report the first successful synthesis of a series of optically-pure 2,2'-tethered binaphthyl-embedded helical ladder polymers based on quantitative and chemoselective ladderization by the modified alkyne benzannulations using the 4-alkoxy-2,6-dimethylphenylethynyl group as the alkyne source, inaccessible by the conventional approach lacking the 2,6-dimethyl substituents. Due to the defect-free helix formation, the circular dichroism signal increased by more than 6 times the previously reported value. The resulting helical secondary structure can be fine-tuned by controlling the binaphthyl dihedral angle in the repeating unit with variations in the 2,2'-alkylenedioxy tethering groups by one carbon atom at a time. The optimization of the helical ladder structures led to a strong circularly polarized luminescence with a high fluorescence quantum yield (28 %) and luminescence dissymmetry factor (2.6×10-3 ).

Chiral perturbation on single benzene-based fluorophores: A structure/(chir)optical activity relationship study

In this paper, we describe the synthesis and the (chir)optical properties of a novel series of circularly polarized luminescent emitters. These molecules involve a compact single benzene-based donor-acceptor fluorophore composed of two cyclic alkylamines as electron donors and a phthalonitrile moiety as electron acceptor linked to a configurationally stable BINOL acting as a chiral perturbation unit. These new compounds display fair quantum yields (up to 66%) with emission maxima around 500 nm in toluene solutions, and the study of their chiroptical properties has shown that the cyclic alkylamine's ring size affects significantly the luminescence dissymmetry factors, reaching 2.2 × 10-3 for the larger cyclic alkylamine moieties.

Solvent-Dependent Functional Aggregates of Unsymmetrical Squaraine Dyes on TiO2 Surface for Dye-Sensitized Solar Cells

Alkyl group wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes SQ1, SQ5, and SQS4 were used to evaluate the effect of sensitizing solvents on dye-sensitized solar cell (DSSC) efficiency. A drastic change in DSSC efficiency was observed when the photo-anodes were sensitized in acetonitrile (bad solvent when considering dye solubility) and chloroform (good solvent) with an Iodolyte (I^-/I₃^-) electrolyte. The DSSC device sensitized with squaraine dyes in acetonitrile showed better photovoltaic performance with enhanced photocurrent generation and photovoltage compared to the device sensitized in chloroform. In a good sensitizing solvent, dyes with long hydrophobic alkyl chains are deleterious forming aggregates on the TiO₂ surface, which results in an incident photon-to-current conversion efficiency (IPCE) response mostly from monomeric and dimeric structures. Meanwhile, a bad sensitizing solvent facilitates the formation of well-packed self-assembled structures on the TiO₂ surface, which are responsible for a broad IPCE response and high device efficiencies. The photoanode sensitized in the bad sensitizing solvent showed enhanced V_OC values of 642, 675, and 699 mV; J_SC values of 6.38, 11.1, and 11.69 mA/cm²; and DSSC device efficiencies of 3.0, 5.63, and 6.13% for the SQ1, SQ5, and SQS4 dyes in the absence of a coadsorbent (chenodeoxycholic acid (CDCA)), respectively, which were further enhanced by CDCA addition. Meanwhile, the photoanode sensitized in the good sensitizing solvent showed relatively low photovoltaic V_OC values of 640, 652, and 650 mV; J_SC values of 5.78, 6.79, and 6.24 mA/cm²; and device efficiencies of 2.73, 3.35, and 3.20% for SQ1, SQ5, and SQS4 in the absence of CDCA, respectively, which were further varied with equivalents of CDCA. The best DSSC device efficiencies of 6.13 and 3.20% were obtained for SQS4 without CDCA, where the dye was sensitized in acetonitrile (bad) and chloroform (good) sensitizing solvents, respectively.

Triptycene derivatives as chiral probes for studying the molecular enantiorecognition on sub-2-μm particle cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase

Two chiral triptycene derivatives were analyzed on the Chiralpak IB-U column packed with cellulose tris(3,5-dimethylphenylcarbamate)-based sub-2-μm diameter particles. Under normal-phase conditions, sub-minute baseline enantioseparations were obtained. Differences in structural elements and chromatographic behavior of the investigated compounds were evaluated to identify the interactions that drive the chiral discrimination process. From the evaluation of the experimental chromatographic data, it was found that hydrogen bond formation is essential for the separation of enantiomers.

Helical Nanofibers Formed by Palladium-Mediated Assembly of Organic Homochiral Macrocycles Containing Binaphthyl and Pyridyl Units

Herein, we report the synthesis and characterization of homochiral macrocycles, in which molecular rigidity, combined with the presence of multiple functional groups, allow for the assembly of helical nanostructures. 1,1'-bi-2-naphthol (Binol) units are used as robust chirality inducers, and pyridyl units embedded within the molecular frameworks allow the assembly, upon coordination with Pd(II) metal ions, of the macrocyclic building blocks. CD and NMR spectroscopies show the formation of ordered 1D assembly in solution. AFM studies indicate that the molecular systems are capable of forming nanoscale structures. The effective transfer of chiral information results in helical nanofibers, with lengths ranging from a few hundreds of nanometers to some micrometers. AFM line profiles reveal a helical longitudinal period of about 50 nm and a transverse width of 25 to 45 nm after deconvolution.

Aggregation-Induced Circularly Polarized Luminescence: Chiral Organic Materials for Emerging Optical Technologies

Chirality is becoming increasingly important in the design of organic materials with functional properties, when bulk anisotropy is needed. In the past decades, a plethora of chiral organic materials have been studied and developed. Nanostructures have brought substantial advancement to the realization of organic-molecule-based devices, and the possibilities for solid-state light emission are very promising in view of potential applications. Scientific approaches to the realization of chiral emissive materials are indeed growing exponentially. The chiral nanostructures discussed are related both to the way in which luminescence is generated and the way in which it is detected. As to the former, the focus will be on organic chromophores with aggregation-induced emission properties, so that emission is present, or at least largely amplified, when the molecules are in the aggregated state. As to the latter, the focus will be on the ability and a quantitative comparison of organic nanostructures capable of circularly polarized emission.

Chiral Triptycenes in Supramolecular and Materials Chemistry

Triptycenes are an intriguing class of organic molecules with several unusual characteristics, such as a propeller-like shape, saddle-like cavities around a symmetrical scaffold, a rigid π-framework. They have been extensively studied and proposed as key synthons for a variety of applications in supramolecular chemistry and materials science. When decorated with an appropriate substitution pattern, triptycenes can be chiral, and, similarly to other popular chiral π-extended synthons, can express chirality robustly, efficiently, and with relevance to chiroptical spectroscopies. This minireview highlights and encompasses recent advances in the synthesis of chiral triptycenes and in their introduction as molecular scaffolds for the assembly of functional supramolecular materials.

Chiral Nanotubes

Organic nanotubes, as assembled nanospaces, in which to carry out host-guest chemistry, reversible binding of smaller species for transport, sensing, storage or chemical transformation purposes, are currently attracting substantial interest, both as biological ion channel mimics, or for addressing tailored material properties. Nature's materials and machinery are universally asymmetric, and, for chemical entities, controlled asymmetry comes from chirality. Together with carbon nanotubes, conformationally stable molecular building blocks and macrocycles have been used for the realization of organic nanotubes, by means of their assembly in the third dimension. In both cases, chiral properties have started to be fully exploited to date. In this paper, we review recent exciting developments in the synthesis and assembly of chiral nanotubes, and of their functional properties. This review will include examples of either molecule-based or macrocycle-based systems, and will try and rationalize the supramolecular interactions at play for the three-dimensional (3D) assembly of the nanoscale architectures.

Synthesis, Structure, and Photophysical/Chiroptical Properties of Benzopicene-Based π-Conjugated Molecules

The convenient synthesis of substituted benzopicenes and azabenzopicenes has been achieved by the cationic rhodium(I)/H₈-BINAP or BINAP complex-catalyzed [2+2+2] cycloaddition under mild conditions. This method was applied to the synthesis of benzopicene-based long ladder and helical molecules. The X-ray crystal structure analysis revealed that the benzopicene-based helical molecule is highly distorted and the average distance of overlapped rings is markedly shorter than that in the triphenylene-based helical molecule. Photophysical and chiroptical properties of these benzopicene and azabenzopicene derivatives have also been examined. With respect to photophysical properties, substituted benzopicenes and azabenzopicenes showed red shifts of absorption and emission maxima compared with the corresponding triphenylenes and azatriphenylenes. With respect to chiroptical properties, the CPL spectra of the benzopicene-based helical molecule showed two opposite peaks, and thus the value of the CPL was smaller than that of the triphenylene-based helical molecule presumably due to the presence of two chiral fluorophores.

Novel N-Doped Carbon Dots/β-Cyclodextrin Nanocomposites for Enantioselective Recognition of Tryptophan Enantiomers

Based on N-doped carbon dots/β-cyclodextrin nanocomposites modified glassy carbon electrodes (N-CDs/β-CD/GCE), an effective electrochemical sensor for enantioselective recognition of tryptophan (Trp) enantiomers was developed by differential pulse voltammograms (DPVs). Fluorescent N-CDs were synthesized through a hydrothermal method and characterized by spectroscopic approaches. The N-CDs/β-CD nanocomposites were efficiently electrodeposited on the surface of GCE through C-N bond formation between N-CDs and electrode. The obtained N-CDs/β-CD/GCE was characterized by multispectroscopic and electrochemical methods. Such N-CDs/β-CD/GCE generated a significantly lower Ip and more negative Ep in the presence of l-Trp in DPVs, which was used for the enantioselective recognition of Trp enantiomers. The N-CDs/β-CD nanocomposites showed different binding constants for tryptophan enantiomers, and they further selectively bonded with l-Trp to form inclusion complexes. This N-CDs/β-CD/GCE combined advantages of N-CDs with strong C-N binding ability and β-CD with specific recognition of Trp enantiomers to fabricate a novel sensing platform for enantioselective recognition of Trp enantiomers. This strategy provided the possibility of using a nanostructured sensor to discriminate the chiral molecules in bio-electroanalytical applications.

Propeller-Like Nanorod-Upconversion Nanoparticle Assemblies with Intense Chiroptical Activity and Luminescence Enhancement in Aqueous Phase

Propeller-like nanoscale assemblies with exceptionally intense chiroptical activity and strong luminescence are prepared using gold nanorods and upconversion nanoparticles. The circular dichroism intensity of the tetramer reached 80.9 mdeg, with g-factor value of 2.1 × 10(-2) . The enhancement factor of upconversion luminescence is as high as 21.3 in aqueous phase. Attomolar bioanalysis of a cancer biomarker with two model is also achieved, showing potential for early disease diagnosis and environmental monitoring.

Hydrogen-bonded bent-core blue phase liquid crystal complexes containing various molar ratios of proton acceptors and donors

The molar ratio, alkyl chain length, lateral fluoro-substitution and the chiral center of H-bonded bent-core supramolecules would affect the BP ranges of BPLC complexes. H-bonded bent-core complex PIIIC9/AIIF* (3/7 mol mol⁻¹) displayed the widest BPI range of ΔT_BPI = 12 °C.

NMR detection of chirality and enantiopurity of amines by using benzene tricarboxamide-based hydrogelators as chiral solvating agents

The use of gelator 1D as a means for NMR-based determination of the enantiopurity and chirality of amines.

Lateral fluoro-substitution and chiral effects on supramolecular liquid crystals containing rod-like and H-bonded bent-core mesogens

We report the first series of liquid crystalline supramolecular diads containing asymmetric rod-like and H-bonded bent-core mesogens with a wide BPI range, where biaxial parameters and HTP values are the most important factors to stabilize the BPI.

A chiroptical molecular sensor for ferrocene

A chiral molecular sensor is used to recognize ferrocene, with the chiroptical readout used selectively in the presence of competing analytes.

Arrangements of enantiopure and racemic ionic liquids at the liquid/air interface: the role of chirality on self-assembly and layering

This paper reports on the self-assembly ability at the interface IL/air for some couples of enantiopure and racemic chiral ILs.

Chiral nanostructuring of multivalent macrocycles in solution and on surfaces

We describe the design and synthesis of a novel functionality-rich, homochiral macrocycle, possessing the overall molecular D2 symmetry, in which multivalency is introduced into the covalent framework by means of four suitably positioned pyridine moieties. The macrocycle synthesis is carried out with functionalized, enantiopure 1,1'-binaphthyl synthons as the source of chirality by means of a room temperature esterification reaction as the cyclization procedure. Upon addition of Pd(2+), coordination of the pyridine moieties occurs both intra and intermolecularly, to afford chiral ordered mono and dimeric macrocycles or multimeric aggregates depending on the solvents and conditions used. The metal binding event takes place in combination with a significant macrocyclic conformational rearrangement detected by circular dichroism spectroscopy. When in combination with a third component (C60), the macrocycle-Pd(2+) hybrid undergoes surface-confined nanostructuring into chiral nanofibres.

Novel photochromic infinite coordination polymer particles derived from a diarylethene photoswitch

A novel infinite coordination polymer (DAE-ICP) based on zinc nitrite and a diarylethene photoswitch, with reversible photochromic properties in solution and the solid state upon applying photostimuli, was synthesized and characterized by FT-IR, EDX, FE-SEM and FE-TEM.

Synthesis of Binaphthyl-Based Push-Pull Chromophores with Supramolecularly Polarizable Acceptor Ends

We report on the design and synthesis of new enantiopure binaphthyl derivatives in which electron-donating and electron-withdrawing substituents are placed in direct conjugation, to create push-pull dyes potentially active for NLO applications. The dyes, unprecedentedly, extend theirπ-bridge from the 3,3′ positions of the binaphthyl units and incorporate as acceptors 1,3-dicarbonyl and tetrafluorobenzene units, useful for further supramolecular polarization of the chiral dyes.

Synthesis, chiroptical and SHG properties of polarizable push–pull dyes built on π-extended binaphthyls

Novel binaphthyl push–pull dyes extend their π-bridge and incorporate as acceptors pyridine units, useful for further supramolecular polarization.

Homochiral BINOL-based macrocycles with π-electron-rich, electron-withdrawing or extended spacing units as receptors for C60

The “one-pot” synthesis of several homochiral macrocycles has been achieved by using π-electron-rich, electron-deficient or extended aromatic dicarboxylic acids in combination with an axially-chiral dibenzylic alcohol, derived from enantiomerically-pure BINOL. Two series of cyclic adducts with average molecular D₂ and D₃ molecular symmetries, respectively, have been isolated in pure forms. Their yields and selectivities deviate substantially from statistical distributions. NMR and CD spectroscopic methods are efficient and functional in order to highlight the variability of shapes of the covalent macrocyclic frameworks. The larger D₃ cyclic adducts exhibit recognition properties towards C₆₀ in toluene solutions (up to log K_a = 3.2) with variable stoichiometries and variable intensities of the charge-tranfer band upon complexation.

Stereospecific generation of homochiral helices in coordination polymers built from enantiopure binaphthyl-based ligands

The novel enantiopure spacer 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-bis(4-pyridyl-amido) has been designed to prepare helical coordination polymers here investigated by means of experimental and theoretical data.

Crystal structure analyses facilitate understanding of synthesis protocols in the preparation of 6,6′-dibromo-substituted BINOL compounds

A combination of crystallographic and spectroscopic techniques has been used in order to address thorough purification protocols for a series of atropisomeric 1,1′-binaphthalene-2,2′-diol (BINOL) derivatives to be used as building blocks for chiral nanoscale constructs.