Plasmon enhanced water splitting mediated by hybrid bimetallic Au-Ag core-shell nanostructures

Theoretical study of Ag and Au triple core-shell spherical plasmonic nanoparticles in ultra-thin film perovskite solar cells

This work demonstrates the enhancement of the power conversion efficiency of thin film organic-inorganic halide perovskites solar cells by embedding triple-core-shell spherical plasmonic nanoparticles into the absorber layer. A dielectric-metal-dielectric nanoparticle can be substituted for embedded metallic nanoparticles in the absorbing layer to modify their chemical and thermal stability. By solving Maxwell's equations with the three-dimensional finite difference time domain method, the proposed high-efficiency perovskite solar cell has been optically simulated. Additionally, the electrical parameters have been determined through numerical simulations of coupled Poisson and continuity equations. Based on electro-optical simulation results, the short-circuit current density of the proposed perovskite solar cell with triple core-shell nanoparticles consisting of dielectric-gold-dielectric and dielectric-silver-dielectric nanoparticles has been enhanced by approximately 25% and 29%, respectively, as compared to a perovskite solar cell without nanoparticles. By contrast, for pure gold and silver nanoparticles, the generated short-circuit current density increased by nearly 9% and 12%, respectively. Furthermore, in the optimal case of the perovskite solar cell the open-circuit voltage, the short-circuit current density, the fill factor, and the power conversion efficiency have been achieved at 1.06 V, 25 mAcm^-2, 0.872, and 23.00%, respectively. Last but not least, lead toxicity has been reduced due to the ultra-thin perovskite absorber layer, and this study provides a detailed roadmap for the use of low-cost triple core-shell nanoparticles for efficient ultra-thin-film perovskite solar cells.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Impact of hybrid plasmonic nanoparticles on the charge carrier mobility of P3HT:PCBM polymer solar cells

The solution processable polymer solar cells have shown a great promise as a cost-effective photovoltaic technology. Here, the effect of carrier mobility changes has been comprehensively investigated on the performance of P3HT:PCBM polymer solar cells using electro-optical coupled simulation regimes, which may result from the embedding of SiO₂@Ag@SiO₂ plasmonic nanoparticles (NPs) in the active layer. Firstly, the active layer thickness, stemmed from the low mobility of the charge carriers, is optimized. The device with 80 nm thick active layer provided maximum power conversion efficiency (PCE) of 3.47%. Subsequently, the PCE has increased to 6.75% and 6.5%, respectively, along with the benefit of light scattering, near-fields and interparticle hotspots produced by embedded spherical and cubic nanoparticles. The PCE of the devices with incorporated plasmonic nanoparticles are remarkably enhanced up to 7.61% (for spherical NPs) and 7.35% (for cubic NPs) owing to the increase of the electron and hole mobilities to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upmu }_{e}=8\times {10}^{-7} \,{\text{m}}^{2}/\text{V}/\text{s}$$\end{document}μe=8×10-7m2/V/s and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upmu }_{h}=4\times {10}^{-7} \,{\text{m}}^{2}/\text{V}/\text{s}$$\end{document}μh=4×10-7m2/V/s, respectively (in the optimum case). Furthermore, SiO₂@Ag@SiO₂ NPs have been successfully synthesized by introducing and utilizing a simple and eco-friendly approach based on electroless pre-treatment deposition and Stober methods. Our findings represent a new facile approach in the fabrication of novel plasmonic NPs for efficient polymer solar cells.

Plasmonic nanoparticle-film-assisted photoelectrochemical catalysis across the entire visible-NIR region

Low solar light absorption and high electron-hole pair recombination are still the main challenges for solar energy conversion. Here, we design a plasmonic nanoparticle (NP)-film with a unique structure combining the advantages of a Au NP and film, which exhibits strong broadband absorption from the visible to near-infrared (NIR) wavelength range. In addition, the high density of sub-1 nm inter-particle gaps in the Au NP-film supports electromagnetic field enhancement of several orders of magnitude that greatly promotes the generation and separation of electron-hole pairs. Accordingly, the plasmonic NP-film-assisted photocatalyst (TiO₂/90Au/TiO₂) leads to an 88-fold increase in the photocurrent density at 0.75 V vs. RHE in 25% methanol solution under visible-NIR light irradiation (λ > 420 nm) compared to a TiO₂ film, which is higher than those of the ever reported Au/TiO₂ photocatalysts in the entire visible-NIR range. Our finding indicates a promising way to explore full solar spectrum photocatalysts, which can be easily extended to other energy conversion applications.

Gold nanomaterials as key suppliers in biological and chemical sensing, catalysis, and medicine

BACKGROUND

Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.

SCOPE OF REVIEW

The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed.

MAJOR CONCLUSIONS

AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods.

GENERAL SIGNIFICANCE

This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.

High-temperature stable plasmonic and cavity resonances in metal nanoparticle-decorated silicon nanopillars for strong broadband absorption in photothermal applications

Plasmonic metal nanoparticles in conjunction with the cavity mode resonance in crystalline silicon (c-Si) nanopillars (NPs) can help achieve strongly enhanced broadband light absorption far beyond the limit of bulk c-Si. However, a major concern arises from the stability of metal nanoparticles, particularly at a high temperature, as the diffusion and conglomeration of the nanoparticles will undermine the very basis for the advantageous plasmonic effect. We here carried out a systematic investigation of the thermal stability of different metal nanoparticles coated on 3D Si-based NPs and found that simple Al2O3 encapsulation could help stabilize the gold (Au) particles coated on Si NPs even when subjected to annealing at >1073 K while accomplishing excellent broadband optical absorption (∼95%) from 200 nm to 2500 nm. This could be assigned mainly to the excellent dispersion retention capability of the Al2O3-encapsulated Au nanoparticles and the beneficial plasmon resonance absorption among the Au nanoparticles and Si NPs, as also revealed from the FDTD simulation analysis. Finally, a rapid vapor generation application was demonstrated based on the optimized Au/Si NPs, where salt water drops could be directly injected onto the high-temperature photo-heated Au/Si NPs and could vaporize/bounce off quickly without leaving any salt precipitation on the surface. This new strategy can also pave the way for high-performance Si-based photothermal applications.

In Situ Shape Change of Au Nanoparticles on TiO2 by CdS Photodeposition: Its Near-Field Enhancement Effect on Photoinduced Electron Injection from CdS to TiO2

Hemisphere-like gold nanoparticles (NPs) were loaded on TiO₂ (Au/TiO₂) by the deposition-precipitation method. Subsequent photodeposition of CdS on the Au surface of Au/TiO₂ at 50 °C yields Au(core)-CdS(shell) hybrid quantum dots with a heteroepitaxial (HEPI) junction on TiO₂ (Au@#CdS/TiO₂), whereas nonHEPI Au@CdS/TiO₂ was formed by CdS photodeposition at 25 °C. In the HEPI system, the shape of the Au core changes to an angular shape, whereas it remains in a hemisphere-like shape in the nonHEPI system. The hot photodeposition technique was applied to the Au NP-loaded mesoporous TiO₂ nanocrystalline film (Au/mp-TiO₂). Using Au@CdS/mp-TiO₂ and Au@#CdS/mp-TiO₂ as the photoanodes, two-electrode quantum dot-sensitized photoelectrochemical cells were fabricated for hydrogen (H₂) generation from water, and the performances of the cells were evaluated under illumination of simulated sunlight. In the photocurrent and the rate of H₂ evolution, the Au@#CdS/mp-TiO₂ photoanode cell surpasses the CdS/mp-TiO₂ and Au@CdS/mp-TiO₂ ones. Three-dimensional finite-difference time-domain calculations for the model systems indicated that the angular shape Au core generates an intense electric field at the corners and edges, extending the electric field distribution over the Au core-CdS shell interface. The striking shape effect on the cell performances can originate from the promotion of the CdS excitation and charge separation due to the near-field enhancement by the deformed Au core.

Enzyme-catalyzed Ag Growth on Au Nanoparticle-assembled Structure for Highly Sensitive Colorimetric Immunoassay

We have developed a sensitive colorimetric immunoassay with broad dynamic range using enzyme-catalyzed Ag growth on gold nanoparticle (NP)-assembled silica (SiO2@Au@Ag). To reduce Ag+ ion content and promote Ag growth on the assembled Au NPs, alkaline phosphatase (AP)-based enzymatic amplification was incorporated, which considerably increased the colorimetric read-out. As a model study, sandwich enzyme-linked immunosorbent assay (ELISA) was used to quantify target IgG. The immune complexes capture the Ab-IgG-AP-labeled detection Ab and trigger the enzyme-catalyzed reaction to convert 2-phospho-L-ascorbic acid to ascorbic acid in the presence of the target IgG. Ascorbic acid reduced Ag+ to Ag, which formed Ag shells on the surface of SiO2@Au and enhanced the absorbance of the SiO2@Au@Ag solution. Plasmonic immunoassay showed a significant linear relationship between absorbance and the logarithm of IgG concentration in the range of ca. 7 × 10-13 M to 7 × 10-11 M. The detection limit was at 1.4 × 10-13 M, which is several hundred folds higher than that of any conventional colorimetric immunoassay. Thus, our novel approach of signal-amplification can be used for highly sensitive in vitro diagnostics and detection of target proteins with the naked eye without using any sophisticated instrument.

Optical Properties of Complex Plasmonic Materials Studied with Extended Effective Medium Theories Combined with Rigorous Coupled Wave Analysis

In this study we fabricate gold nanocomposites and model their optical properties. The nanocomposites are either homogeneous films or gratings containing gold nanoparticles embedded in a polymer matrix. The samples are fabricated using a recently developed technique making use of laser interferometry. The gratings present original plasmon-enhanced diffraction properties. In this work, we develop a new approach to model the optical properties of our composites. We combine the extended Maxwell-Garnett model of effective media with the Rigorous Coupled Wave Analysis (RCWA) method and compute both the absorption spectra and the diffraction efficiency spectra of the gratings. We show that such a semi-analytical approach allows us to reproduce the original plasmonic features of the composites and can provide us with details about their inner structure. Such an approach, considering reasonably high particle concentrations, could be a simple and efficient tool to study complex micro-structured system based on plasmonic components, such as metamaterials.

Effects of Plasmonic Metal Core -Dielectric Shell Nanoparticles on the Broadband Light Absorption Enhancement in Thin Film Solar Cells

To guide the design of plasmonic solar cells, theoretical investigation of core (metal)-shell (dielectric) nanoparticles for light absorption enhancement in thin film Si solar cells is performed. In contrast to the reported simulations and experimental results that rear-located surface plasmon on bare metallic nanoparticles is preferred, the core-shell nanoparticles demonstrate better performance when surface plasmon is located in front of a solar cell. This has been attributed to the enhanced forward scattering with vanishing backward scattering preserved over a wide spectral range in core-shell nanoparticles. This work provides a concept to achieve enhanced forward scattering with weakened backward scattering in plasmonic thin film solar cells.

Ultrafast carrier dynamics in bimetallic nanostructure-enhanced methylammonium lead bromide perovskites

In this work, we examine the impact of hybrid bimetallic Au/Ag core/shell nanostructures on the carrier dynamics of methylammonium lead tribromide (MAPbBr₃) mesoporous perovskite solar cells (PSCs). Plasmon-enhanced PSCs incorporated with Au/Ag nanostructures demonstrated improved light harvesting and increased power conversion efficiency by 26% relative to reference devices. Two complementary spectral techniques, transient absorption spectroscopy (TAS) and time-resolved photoluminescence (trPL), were employed to gain a mechanistic understanding of plasmonic enhancement processes. TAS revealed a decrease in the photobleach formation time, which suggests that the nanostructures improve hot carrier thermalization to an equilibrium distribution, relieving hot phonon bottleneck in MAPbBr₃ perovskites. TAS also showed a decrease in carrier decay lifetimes, indicating that nanostructures enhance photoinduced carrier generation and promote efficient electron injection into TiO₂ prior to bulk recombination. Furthermore, nanostructure-incorporated perovskite films demonstrated quenching in steady-state PL and decreases in trPL carrier lifetimes, providing further evidence of improved carrier injection in plasmon-enhanced mesoporous PSCs.

Highly sensitive and reliable SERS probes based on nanogap control of a Au–Ag alloy on silica nanoparticles

We developed highly sensitive surface-enhanced Raman scattering (SERS) probes based on SiO₂@Au@Ag nanoparticles (NPs) using the Ag growth onto Au NP seeds method.

Enhancement in Organic Photovoltaics Controlled by the Interplay between Charge-Transfer Excitons and Surface Plasmons

In this work, we investigate plasmonic enhancement in poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester organic photovoltaics (OPVs) by integrating shape- and size-controlled bimetallic gold core-silver shell nanocrystals (Au-Ag NCs) into the poly(3,4-ethylenedioxythiophene):polystyrene sulfonate hole-transport layer. We observed that the best-performing Au-Ag NC-incorporated OPVs improved the power conversion efficiency by 9% via a broadband increase in photocurrent throughout the visible spectrum. Our experimental and computational results suggest that the observed photocurrent enhancement in plasmonic OPVs originates from both enhanced absorption and improved exciton dissociation and charge collection. This is particularly achieved by placing metal NCs near the interface of the active layer and hole-transport layer. The impedance spectroscopy results suggest that Au-Ag NCs reduce recombination and also increase the internal exciton to carrier efficiency by driving the dissociation of bound charge-transfer states to free carriers.

Preparation of Au@Ag nanoparticles at a gas/liquid interface and their application for sensitive detection of hydrogen peroxide

Preparation of Au@Ag NPs at a gas/liquid interface by a seed-mediated growth procedure and their application for sensitive detection of hydrogen peroxide.