A surface functionalized nanoporous titania integrated microfluidic biochip

Understanding of the Effect of the Adsorption of Atom and Cluster Silver on Chitosan: An In Silico Analysis

In this work, the structural, electronic, and optical stability properties of the chitosan monomer (M-Ch) and atomic silver complex are reported, as well as a unitary cell of a silver cluster in the gas phase and acetic acid. The generalized gradient approximation HSEh1PBE/def2-TZVPP50 results established the structures' anionic charge (Q = -1|e|) and the doublet state (M = 2). The high cohesive energy indicates structural stability, and the quantum-mechanical descriptors show a high polarity and low chemical reactivity. Also, the quantum-mechanical descriptors present a low work function that shows the structures are suitable for applications in light-emitting diodes. Finally, the electronic behavior observed by the |HOMO-LUMO| gap energy changes depending on the atomic silver incorporated into the complex.

Electrochemical devices for cholesterol detection

Cholesterol can be considered as a biomarker of illnesses such as heart and coronary artery diseases or arteriosclerosis. Therefore, the fast determination of its concentration in blood is interesting as a means of achieving an early diagnosis of these unhealthy conditions. Electrochemical sensors and biosensors have become a potential tool for selective and sensitive detection of this biomolecule, combining the analytical advantages of electrochemical techniques with the selective recognition features of modified electrodes. This review covers the different approaches carried out in the development of electrochemical sensors for cholesterol, differentiating between enzymatic biosensors and non-enzymatic systems, highlighting lab-on-a-chip devices. A description of the different modification procedures of the working electrode has been included and the role of the different functional materials used has been discussed.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Electrochemical impedimetric biosensors for food safety

Electrochemical impedimetric biosensors (EIBs) have a simple structure and can be used to rapidly and sensitively detect and measure hazards in food. EIBs detect and measure target molecules by transducing biochemical reactions on their surface to electrical signal outputs responding to a sinusoidal electrical signal input. Due to their structural simplicity and analytical sensitivity, EIBs are regarded as the most potent method of food hazard monitoring that can be implemented in the food supply chain. This paper discusses the theoretical background, structure, and construction of EIB and its applications in food safety.

Biochemistry and biomedicine of quantum dots: from biodetection to bioimaging, drug discovery, diagnostics, and therapy

According to recent research, nanotechnology based on quantum dots (QDs) has been widely applied in the field of bioimaging, drug delivery, and drug analysis. Therefore, it has become one of the major forces driving basic and applied research. The application of nanotechnology in bioimaging has been of concern. Through in vitro labeling, it was found that luminescent QDs possess many properties such as narrow emission, broad UV excitation, bright fluorescence, and high photostability. The QDs also show great potential in whole-body imaging. The QDs can be combined with biomolecules, and hence, they can be used for targeted drug delivery and diagnosis. The characteristics of QDs make them useful for application in pharmacy and pharmacology. This review focuses on various applications of QDs, especially in imaging, drug delivery, pharmaceutical analysis, photothermal therapy, biochips, and targeted surgery. Finally, conclusions are made by providing some critical challenges and a perspective of how this field can be expected to develop in the future.

STATEMENT OF SIGNIFICANCE

Quantum dots (QDs) is an emerging field of interdisciplinary subject that involves physics, chemistry, materialogy, biology, medicine, and so on. In addition, nanotechnology based on QDs has been applied in depth in biochemistry and biomedicine. Some forward-looking fields emphatically reflected in some extremely vital areas that possess inspiring potential applicable prospects, such as immunoassay, DNA analysis, biological monitoring, drug discovery, in vitro labelling, in vivo imaging, and tumor target are closely connected to human life and health and has been the top and forefront in science and technology to date. Furthermore, this review has not only involved the traditional biochemical detection but also particularly emphasized its potential applications in life science and biomedicine.

Inhibition of Epithelial-Mesenchymal Transition and Tissue Regeneration by Waterborne Titanium Dioxide Nanoparticles

Titanium dioxide nanoparticles (TiO₂NPs) are among the most widely manufactured nanomaterials with broad applications in food industry, cosmetics, and medicine. Although the toxicity of TiO₂NPs at high doses has been extensively explored, the potential health risks of TiO₂NPs exposure at nontoxic concentrations remain poorly understood. Epithelial-mesenchymal transition (EMT) plays pivotal roles in a diversity of physiological and pathological processes, including tissue regeneration and cancer metastasis. In this study, we find that the cellular uptake of TiO₂NPs inhibits EMT-mediated cell remodeling and cell migration without exhibiting cytotoxicity. Further investigation reveals that TiO₂NPs suppress the process of EMT through the blockade of transforming growth factor-β (TGFβ) signaling. Particularly, TiO₂NPs interact with the TGFβ receptor TβRI/II complex, induce its lysosomal degradation, and thereby downregulate expression of TGFβ target genes. Moreover, we show that waterborne TiO₂NPs do not elicit toxicity in healthy tissues but hamper EMT-mediated wound healing in two animal models. Long-term exposure of TiO₂NPs in environmental water and drinking water impede the regeneration of amputated fin in zebrafish and the recovery of intestinal mucosal damage in colitic mice. Our results reveal the previously unknown effects of TiO₂NPs during tissue remodeling and repair, which have significant implications in their risk assessment and management.

Nonlithographic Fabrication of Plastic-Based Nanofibers Integrated Microfluidic Biochip for Sensitive Detection of Infectious Biomarker

We report fabrication of a fully integrated plastic based microfluidic biochip for biosensing application. The microfluidic channels were fabricated by tune transfer method and integrated with the prefunctionalized sensing platform. This approach to assembling microchannels into prefunctionalized sensing substrate facilitates controlled functionalization and prevents damages on the functionalized surface. The sensing platform comprised a three-electrode system, in which the sensing electrode was integrated with antibody immobilized carbon nanotubes-zinc oxide (C-ZnO) nanofibers. Electrospinning technique was used to synthesize C-ZnO nanofibers and the surface of the nanofibers was covalently conjugated with histidine rich protein II antibodies (AntiHRP II) toward detection of infectious malarial specific antigen, namely histidine-rich protein II (HRP II). The analytical performance of the fabricated biochip was evaluated by differential pulse voltammetry method. The device exhibited a high sensitivity of 1.19 mA/((g mL^-1)/cm²) over a wide detection range (10 fg/mL to 100 μg/mL) with a low detection limit of 7.5 fg/mL toward HRP II detection. This fully integrated biochip offers a promising cost-effective approach for detection of several other infectious disease biomarkers.

Microfluidic Immuno-Biochip for Detection of Breast Cancer Biomarkers Using Hierarchical Composite of Porous Graphene and Titanium Dioxide Nanofibers

We report on a label-free microfluidic immunosensor with femtomolar sensitivity and high selectivity for early detection of epidermal growth factor receptor 2 (EGFR2 or ErbB2) proteins. This sensor utilizes a uniquely structured immunoelectrode made of porous hierarchical graphene foam (GF) modified with electrospun carbon-doped titanium dioxide nanofibers (nTiO2) as an electrochemical working electrode. Due to excellent biocompatibility, intrinsic surface defects, high reaction kinetics, and good stability for proteins, anatase nTiO2 are ideal for electrochemical sensor applications. The three-dimensional and porous features of GF allow nTiO2 to penetrate and attach to the surface of the GF by physical adsorption. Combining GF with functional nTiO2 yields high charge transfer resistance, large surface area, and porous access to the sensing surface by the analyte, resulting in new possibilities for the development of electrochemical immunosensors. Here, the enabling of EDC-NHS chemistry covalently immobilized the antibody of ErbB2 (anti-ErbB2) on the GF-nTiO2 composite. To obtain a compact sensor architecture, the composite working electrode was designed to hang above the gold counter electrode in a microfluidic channel. The sensor underwent differential pulse voltammetry and electrochemical impedance spectroscopy to quantify breast cancer biomarkers. The two methods had high sensitivities of 0.585 μA μM(-1) cm(-2) and 43.7 kΩ μM(-1) cm(-2) in a wide concentration range of target ErbB2 antigen from 1 × 10(-15) M (1.0 fM) to 0.1 × 10(-6) M (0.1 μM) and from 1 × 10(-13) M (0.1 pM) to 0.1 × 10(-6) M (0.1 μM), respectively. Utilization of the specific recognition element, i.e., anti-ErbB2, results in high specificity, even in the presence of identical members of the EGFR family of receptor tyrosine kinases, such as ErbB3 and ErbB4. Many promising applications in the field of electrochemical detection of chemical and biological species will derive from the integration of the porous GF-nTiO2 composite into microfluidic devices.

Mesoporous Few-Layer Graphene Platform for Affinity Biosensing Application

A label-free, highly reproducible, sensitive, and selective biosensor is proposed using antiapolipoprotein B 100 (AAB) functionalized mesoporous few-layer reduced graphene oxide and nickel oxide (rGO-NiO) nanocomposite for detection of low density lipoprotein (LDL) molecules. The formation of mesoporous rGO-NiO composite on indium tin oxide conductive electrode has been accomplished via electrophoretic technique using colloidal suspension of rGO sheets and NiO nanoparticles. This biosensor shows good stability obtained by surface conjugation of antibody AAB molecules with rGO-NiO matrix by EDC-NHS coupling chemistry. The defect-less few layer rGO sheets, NiO nanoparticles (nNiO) and formation of nanocomposite has been confirmed by Raman mapping, electron microscopic studies, X-ray diffraction, and electrochemical techniques. The synthesized rGO-NiO composite is mesoporous dominated with a small percentage of micro and macroporous structure as is evident by the results of Brunauer-Emmett-Teller experiment. Further, the bioconjugation of AAB with rGO-NiO has been investigated by Fourier transform-infrared spectroscopy studies. The kinetic studies for binding of antigen-antibody (LDL-AAB) and analytical performance of this biosensor have been evaluated by the impedance spectroscopic method. This biosensor exhibits an excellent sensitivity of 510 Ω (mg/dL)(-1) cm(-2) for detection of LDL molecules and is sensitive to 5 mg/dL concentration of LDL in a wide range of 0-130 mg/dL. Thus, this fabricated biosensor is an efficient and highly sensitive platform for the analysis of other antigen-antibody interactions and biomolecules detection.

Tunable bioelectrodes with wrinkled-ridged graphene oxide surfaces for electrochemical nitrate sensors

Morphological transitions from wrinkles to localized ridges are realized in the graphene oxide layer of a bioelectrode by simple stretching and relaxing, which allow tuning and improving the sensing characteristics of the enzymatic nitrate sensor.