Composite nanoplatelets combining soft-magnetic iron oxide with hard-magnetic barium hexaferrite

Unraveling Exchange Coupling in Ferrites Nano-Heterostructures

The magnetic coupling of a set of SrFe12 O19 /CoFe2 O4 nanocomposites is investigated. Advanced electron microscopy evidences the structural coherence and texture at the interfaces of the nanostructures. The fraction of the lower anisotropy phase (CoFe2 O4 ) is tuned to assess the limits that define magnetically exchange-coupled interfaces by performing magnetic remanence, first-order reversal curves (FORCs), and relaxation measurements. By combining these magnetometry techniques and the structural and morphological information from X-ray diffraction, electron microscopy, and Mössbauer spectrometry, the exchange intergranular interaction is evidenced, and the critical thickness within which coupled interfaces have a uniform reversal unraveled.

Synthesis of Sandwiched Composite Nanomagnets by Epitaxial Growth of Fe3O4 Layers on SrFe10Cr2O19 Nanoplates in High-Boiling Organic Solvent

Herein, we demonstrate the synthesis of sandwiched composite nanomagnets, which consist of hard magnetic Cr-substituted hexaferrite cores and magnetite outer layers. The hexaferrite plate-like nanoparticles, with average dimensions of 36.3 nm × 5.2 nm, were prepared via a glass crystallization method and were covered by spinel-type iron oxide via thermal decomposition of iron acetylacetonate in a hexadecane solution. The hexaferrite nanoplates act as seeds for the epitaxial growth of the magnetite, which results in uniform continuous outer layers on both sides. The thickness of the layers can be adjusted by controlling the concentration of metal ions. In this way, layers with an average thickness of 3.7 and 4.9 nm were obtained. Due to an atomically smooth interface, the magnetic composites demonstrate the exchange coupling effect, acting as single phases during remagnetization. The developed approach can be applied to any spinel-type material with matching lattice parameters and opens the way to expand the performance of hexaferrite nanomagnets due to a combination of various functional properties.

Sandwiched CoFe2O4/SrFe11.5Al0.5O19/CoFe2O4 nanoparticles with exchange-coupling effect

Exchange-coupled hard/soft ferrite nanoparticles are prospective to squeeze out a part of expensive magnets based on rare-earth elements. However, the known exchange-coupled composite ferrite nanoparticles often suffer from the lack of a powerful enough hard magnetic core, high defectivity of magnetic phases, and a poor interface between them. Herein, we demonstrate the first efficient synthesis of sandwiched nanomagnets, which exhibit a pronounced exchange-coupling effect. This work is featured by the use of individual highly coercive strontium hexaferrite nanoplates prepared by a borate glass crystallization method as cores for the composite particles. The high crystal quality of the hexaferrite cores as the substrate promotes the epitaxial growth of CoFe₂O₄ layers on the 001 facets from an organic high-boiling solvent and results in the enhancement of the remanent magnetization and maximum energy product of the composite material. The results of this work open new prospects for the fabrication of multilayer oxide heterostructures with synergetic performance, which expands the applications of exchange-coupled composites.

Novel Ba-hexaferrite structural variations stabilized on the nanoscale as building blocks for epitaxial bi-magnetic hard/soft sandwiched maghemite/hexaferrite/maghemite nanoplatelets with out-of-plane easy axis and enhanced magnetization

Atomic-resolution scanning-transmission electron microscopy showed that barium hexaferrite (BHF) nanoplatelets display a distinct structure, which represents a novel structural variation of hexaferrites stabilized on the nanoscale. The structure can be presented in terms of two alternating structural blocks stacked across the nanoplatelet: a hexagonal (BaFe₆O₁₁)^2- R block and a cubic (Fe₆O₈)²⁺ spinel S block. The structure of the BHF nanoplatelets comprises only two, or rarely three, R blocks and always terminates at the basal surfaces with the full S blocks. The structure of a vast majority of the nanoplatelets can be described with a SR*S*RS stacking order, corresponding to a BaFe₁₅O₂₃ composition. The nanoplatelets display a large, uniaxial magnetic anisotropy with the easy axis perpendicular to the platelet, which is a crucial property enabling different novel applications based on aligning the nanoplatelets with applied magnetic fields. However, the BHF nanoplatelets exhibit a modest saturation magnetization, M_S, of just over 30 emu g^-1. Given the cubic S block termination of the platelets, layers of maghemite, γ-Fe₂O₃, (M), with a cubic spinel structure, can be easily grown epitaxially on the surfaces of the platelets, forming a sandwiched M/BHF/M platelet structure. The exchange-coupled composite nanoplatelets exhibit a remarkably uniform structure, with an enhanced M_S of more than 50 emu g^-1 while essentially maintaining the out-of-plane easy axis. The enhanced M_S could pave the way for their use in diverse platelet-based magnetic applications.

Improved magnetic and magnetoelectric properties in BaFe12O19 nanostructures

Improved magnetism and magnetodielectric coupling are obtained in plate-like BaFe₁₂O₁₉ nanoparticles because of their larger structural distortion.

Synthesis and assembly of barium-doped iron oxide nanoparticles and nanomagnets

A facile organic-phase synthesis of monodisperse barium-doped iron oxide (Ba-Fe-O) nanoparticles (NPs) is reported. The Ba-Fe-O NPs can be converted into hexagonal barium ferrite NPs at 700 °C, showing strong ferromagnetic properties with H(c) reaching 5260 Oe and M(s) at 54 emu g(-1). Moreover, the Ba-Fe-O NPs can be assembled into densely packed magnetic arrays, providing a unique model system for studying nanomagnetism and for nanomagnetic applications.

Related magnetic properties of CoFe2O4 cobalt ferrite particles synthesised by the polyol method with NaBH4 and heat treatment: new micro and nanoscale structures

In this contribution, hierarchical CoFe₂O₄ particles are successfully prepared via a modified polyol elaboration method with NaBH₄ and a proposed heat treatment process.