Facile preparation of ordered mesoporous MnCo2O4 for low-temperature selective catalytic reduction of NO with NH3

Remarkable N2-selectivity enhancement of NH3-SCR over HPMo modified MnCo-BTC@SiO2 catalyst

In this work, the phosphomolybdate (HPMo) modification strategy was applied to improve the N2 selectivity of MnCo-BTC@SiO2 catalyst for the selective catalytic reduction of NOx, and further, the mechanism of HPMo modification on enhanced catalytic performance was explored. Among MnCo-BTC@SiO2-x catalysts with different HPMo concentrations, MnCo-BTC@SiO2-0.75 catalyst exhibited not only the highest NH3-SCR performance (∼95% at 200-300°C) but also the best N2 selectivity (exceed 80% at 100-300°C) due to the appropriate redox capacity, greater surface acidity. X-ray photoelectron spectrometer (XPS) and temperature programmed reduction of H2 (H2-TPR) results showed that the modification with HPMo reduced the oxidation-reduction performance of the catalyst due to electron transfer from Mo5+ to Mn4+/Mn3+ and prevent the excessive oxidation of ammonia adsorption species. NH3 temperature-programmed desorption of (NH3-TPD) results showed that the modification with HPMo could significantly improve the surface acidity and NH3 adsorption, which enhance the catalytic activity and N2 selectivity. In-situ diffused reflectance infrared Fourier transform spectroscopy (in-situ DRIFTS) revealed that modification with HPMo increased significantly the amount of adsorbed NH3 species on the Bronsted acid site and CB/CL, it suppressed the production of N2O by inhibiting the production of NH species, the deep dehydrogenation of ammonia adsorption species. This study provided a simple design strategy for the catalyst to improve the low-temperature catalytic performance and N2 selectivity.

Determination of uric acid in serum by SERS system based on VO-MnCo2O4/Ag nanozyme

The level of uric acid is crucial to human health. Octahedral oxygen vacancy MnCo₂O₄/Ag (V_O-MnCo₂O₄/Ag) nanozyme was successfully prepared by simple hydrothermal, calcination and self-reduction methods. V_O-MnCo₂O₄/Ag nanozyme is rich in Mn²⁺/Mn³⁺ and C_O²⁺/C_O³⁺ redox electron pairs, large specific surface area and oxygen vacancies. V_O-MnCo₂O₄/Ag nanozyme showed high uricase-like activity and peroxidase-like activity. At the same time, the SERS signal of the detected molecule could be significantly enhanced after the catalytic reaction of the V_O-MnCo₂O₄/Ag nanozyme. The K_m values of V_O-MnCo₂O₄/Ag nanozyme for H₂O₂ and TMB were 0.04 mM and 0.027 mM respectively. Based on the uric acid oxidase-like and peroxidase-like activities of V_O-MnCo₂O₄/Ag, we developed a label-free, sensitive, and reliable SERS uric acid detection system. The detection linear range of uric acid is 0.01 μM-1000 μM and the detection of limit is 7.8 × 10^-9 M. The results show that the sensing system has good accuracy, sensitivity, selectivity, and stability. It can be applied to the determination of samples under different conditions. This study provides profound insights into the design of enzyme-like activity regulation and SERS properties regulation of nanozymes, provides guidance for the study of reaction kinetics and catalytic mechanism of nanozymes, and has broad application prospects in the field of nanozymes and SERS sensing analysis.

Understanding structure-performance relationships of CoOx/CeO2 catalysts for NO catalytic oxidation: Facet tailoring and bimetallic interface designing

Crystalline structure and bimetallic interaction of metal oxides are essential factors to determine the catalytic activity. Herein, three different CoO_x/CeO₂ catalysts, employing CeO₂ nanorods (predominately exposed {110 facet), CeO₂ nanopolyhedra ({111} facet) and CeO₂ nanocubes ({100} facet) as the supports, are successfully prepared for investigating the effect of exposed crystal facets and bimetallic interface interaction on NO oxidation. In comparison with the {111} and {100} facets, the exposed crystal facet {110} exists the best superiority to anchor and stabilize Co species. Moreover, ultra-small CoO_x clusters composed of strong Co-O coordination shells with minor Co-O-Ce interaction are formed and uniformly dispersed on the CeO₂ nanorods. Structural characterizations reveal that the active exposed crystal facet {110} and the strong bimetallic interface interaction in CoO_x/CeO₂-nanorods (R-CC) result in more structural defect, endowing it with abundant oxygen vacancies, excellent reducibility and strong adsorption capacity. The DRIFTs spectra further indicate that the exposed crystal facet {110} has a significant promoting effect on the strength of nitrates compared with {111} and {100} facets. The bimetallic interface interaction not only significantly facilitates the formation of nitrate species at lower temperature, but also effectively suppresses the generation of sulfate and lower the sulphation rate. Therefore, R-CC catalyst exhibits the maximum NO oxidation activity with the conversion of 86.4 % at 300 °C and still sustains its high activity under cyclic condition or 50 ppm SO₂. The provided crystalline structure and interaction-enhanced strategy sheds light on the design of high-activity NO oxidation catalysts.

Low-temperature selective catalytic reduction of NO with NH3 over an FeO x /β-MnO2 composite

A series of Fe-modified β-MnO₂ (FeO _x /β-MnO₂) composite catalysts were prepared by an impregnation method with β-MnO₂ and ferro nitrate as raw materials. The structures and properties of the composites were systematically characterized and analyzed by X-ray diffraction, N₂ adsorption-desorption, high-resolution electron microscopy, temperature-programmed reduction of H₂, temperature-programmed desorption of NH₃, and FTIR infrared spectroscopy. The deNO _x activity, water resistance, and sulfur resistance of the composite catalysts were evaluated in a thermally fixed catalytic reaction system. The results indicated that the FeO _x /β-MnO₂ composite (Fe/Mn molar ratio of 0.3 and calcination temperature of 450 °C) had higher catalytic activity and a wider reaction temperature window compared with β-MnO₂. The water resistance and sulfur resistance of the catalyst were enhanced. It reached 100% NO conversion efficiency with an initial NO concentration of 500 ppm, a gas hourly space velocity of 45 000 h^-1, and a reaction temperature of 175-325 °C. The appropriate Fe/Mn molar ratio sample had a synergistic effect, affecting the morphology, redox properties, and acidic sites, and helped to improve the low-temperature NH₃-SCR activity of the composite catalyst.

The promoting/inhibiting effect of water vapor on the selective catalytic reduction of NOx

In the field of nitrogen oxides (NO_x) abatement, developing selective catalytic reduction (SCR) catalysts that can operate stably in the practical conditions remains a big challenge because of the complexity and uncertainty of actual flue gas emissions. As water vapor is unavoidable in the actual flue gas, it is indispensable to explore its effect on the performance of SCR catalysts. Many studies have proved that the effects of H₂O on de-NO_x activity of SCR catalysts were indeed observed during SCR reactions operated under wet conditions. Whether the effect is promotive or inhibitory depends on the reaction conditions, catalyst types and reducing agents used in SCR reaction. This review focuses on the effect of H₂O on SCR catalysts and SCR reaction, including promoting effect, inhibiting effect, as well as the effecting mechanism. Besides, various strategies for developing a water-resistant SCR catalyst are also included. We hope that this work can give a more comprehensive insight into the effects of H₂O on SCR catalysts and help with the rational design of water-resistant SCR catalysts for further practical application in NO_x abatement field.

Low-Temperature NH3-SCR on Cex-Mn-Tiy Mixed Oxide Catalysts: Improved Performance by the Mutual Effect between Ce and Ti

A series of Cex-Mn-Tiy catalysts were synthesized using the coprecipitation method, and sodium carbonate solution was used as a precipitant. The various catalysts were assessed by selective catalytic reduction of NOx with NH3, and characterized by X-ray diffraction, Raman spectroscopy, H2 temperature-programmed reduction, NH3 temperature-programmed desorption, and X-ray photoelectron spectroscopy to investigate the physicochemical properties, surface acidity, and redox abilities of the Cex-Mn-Tiy catalysts. The Ce0.1-Mn-Ti0.1 catalyst exhibited the best catalytic performance (more than 90% NOx conversion in the range of 75 to 225 °C), as a result of proper redox ability, abundant acid sites, high content of Mn4+ and Ce3+, and surface-adsorbed oxygen (OS). The results of in situ DRIFT spectroscopy showed that the NH3-SCR reaction followed both the E-R and L-H paths over the Ce0.1-Mn-Ti0.1 catalyst, and it occurred faster and more sharply when it mainly abided by the E-R mechanism.

Investigation of Sulfur Doping in Mn-Co Oxide Nanotubes on Surface-Enhanced Raman Scattering Properties

Doping engineering is an efficient strategy to manipulate the optoelectronic properties of metal oxides for sensing, catalysis, and energy applications. Herein, we have demonstrated the fabrication of sulfur (S)-doped Mn-Co oxides to regulate their band and surface electronic structures, which is beneficial to enhancing the charge transfer (CT) between the metal oxides and their adsorbed molecules. As expected, significantly enhanced SERS signals are achieved on S-doped Mn-Co oxide nanotubes, and the minimum detection concentration can reach as low as 10^-8 M. Furthermore, the change in the electronic structure caused by S-doping provides different microelectric fields to influence the orientation of the interaction between the probe molecules and the substrate. Additionally, the evaluation of the oxidase-like catalytic activity of the substrate proved that, with an increase in the ratio of Co²⁺/Co³⁺ content, the number of electrons on the substrate increases, which promotes the CT process and further increases the degree of CT. The nonmetallic doping route in semiconducting metal oxides can provide effective and stable SERS activity; moreover, it provides a new strategy for exploring the relationship between CT in catalysis and SERS performance of semiconductors.

Low-Temperature SCR Catalyst Development and Industrial Applications in China

In recent years, low-temperature SCR (Selective Catalytic Reduction) denitrification technology has been popularized in non-power industries and has played an important role in the control of industrial flue gas NOx emissions in China. Currently, the most commonly used catalysts in industry are V2O5-WO3(MoO3)/TiO2, MnO2-based catalysts, CeO2-based catalysts, MnO2-CeO2 catalysts and zeolite SCR catalysts. The flue gas emitted during industrial combustion usually contains SO2, moisture and alkali metals, which can affect the service life of SCR catalysts. This paper summarizes the mechanism of catalyst poisoning and aims to reduce the negative effect of NH4HSO4 on the activity of the SCR catalyst at low temperatures in industrial applications. It also presents the outstanding achievements of domestic companies in denitrification in the non-power industry in recent years. Much progress has been made in the research and application of low-temperature NH3-SCR, and with the renewed demand for deeper NOx treatments, new technologies with lower energy consumption and more functions need to be developed.

Satisfactory Anti-Interference and High Performance of the 1Co-1Ce/Mn@ZSM-5 Catalyst for Simultaneous Removal of NO and Hg0 in Abominable Flue Gas

The removal performance of NO and Hg⁰, the operating temperature window, and the resistance of SO₂ and H₂O on Mn@ZSM-5 catalyst, which was synthesized by a one-step hydrothermal method with manganese oxide as the active component, were improved by doping different molar ratios of Co/Ce. Co and Ce doping increased the content of Mn⁴⁺ as well as of chemisorbed oxygen and promoted the NO and Hg⁰ removal performance, which reached 96.7 and 98.9%, respectively, in flue gas over the 1Co-1Ce/Mn@ZSM-5 catalyst. Furthermore, with SO₂ and H₂O addition, it decreased slightly to 88.4 and 89.3%, respectively, and then remained stable. The coexistence of SO₂ and H₂O had a synergistic poisoning effect on the activity of the catalyst, while the doping of Co and Ce had a positive influence on the tolerance to SO₂ and H₂O. The excellent anti-interference and high performance of the 1Co-1Ce/Mn@ZSM-5 catalyst in the abominable flue gas were mainly due to the outer surface modification of organosilane and because the sacrificial element Co protected the active sites of Ce and Mn from poisoning, which prevented the redox ability of the catalyst from getting affected.

Preparation of Cordierite Monolith Catalysts with the Coating of K-Modified Spinel MnCo2O4 Oxide and Their Catalytic Performances for Soot Combustion

Diesel engines are important for heavy-duty vehicles. However, particulate matter (PM) released from diesel exhaust should be eliminated. Nowadays, catalytic diesel particulate filters (CDPF) are recognized as a promising technology. In this work, a series of monolith Mn1−nKnCo2O4 catalysts were prepared by the simple citric acid method. The as-prepared catalysts displayed good catalytic performance for soot combustion and the Mn0.7K0.3Co2O4 catalyst gave the best catalytic performance among all the prepared samples. The T10 and Tm of Mn0.7K0.3Co2O4-HC catalyst for soot combustion are 310 and 439 °C, respectively. The physical and chemical properties of catalysts were characterized by means of SEM, XPS, H2-TPR, Raman and other techniques. The characterization results indicate that K substitution is favorable for the formation of oxygen vacancies, enhancing the mobility of active oxygen species, and improving the redox properties and so on. In-situ Raman results prove that the strength of Co-O bonds in the catalysts became weak during the reaction at high temperatures. In addition, SEM and ultrasonic test results show that the peeling rate of the coat-layer is less than 5%. The as-prepared catalysts can be taken as one kind of candidate catalyst for promising application in soot combustion because of its facile synthesis, low cost and high catalytic activity.

Recent progress of low-temperature selective catalytic reduction of NOx with NH3 over manganese oxide-based catalysts

Selective catalytic reduction with NH3 (NH3−SCR) was the most efficient approach to mitigate the emission of nitrogen oxides (NOx). Although the conventional manganese oxide-based catalyst had gradually become a kind...

A review of Mn-based catalysts for low-temperature NH3-SCR: NOx removal and H2O/SO2 resistance

The development of high-efficiency catalysts is the key to the low-temperature NH₃-SCR technology. The introduction of SO₂ and H₂O will lead to poisoning and deactivation of the catalysts, which severely limits the development and application of NH₃-SCR technology. This review introduces the necessity of NO_x removal, explains the mechanisms of H₂O and SO₂ poisoning on NH₃-SCR catalysts, highlights the Mn-based catalysts of different active metals and supports and their resistance to H₂O and SO₂, and analyses the relationship between metal modification, selection of support and preparation method, morphology and structure design and SO₂/H₂O resistance. Given the current problems, this review points out the future research focus of Mn-based catalysts and also puts forward corresponding countermeasures to solve the existing problems.

MnOx Supported on Hierarchical SAPO-34 for the Low-Temperature Selective Catalytic Reduction of NO with NH3: Catalytic Activity and SO2 Resistance

The ethanol dispersion method was employed to synthesize a series of MnOx/SAPO-34 catalysts using SAPO-34 with the hierarchical pore structure as the zeolite carrier, which were prepared by facile acid treatment with citric acid. Physicochemical properties of catalysts were characterized by XRD, XPS, BET, TEM, NH3-TPD, SEM, FT-IR, Py-IR, H2-TRP and TG/DTG. NH3-SCR performances of the hierarchical MnOx/SAPO-34 catalysts were evaluated at low temperatures. Results show that citric acid etching solution at a concentration of 0.1 mol/L yielded a hierarchical MnOx/SAPO-34-0.1 catalyst with ca.15 wt.% Mn loading, exhibiting optimal catalytic activity and SO2 tolerance at low temperatures. Almost 100% NO conversion and over 90% N2 selectivity at 120 °C under a gas hourly space velocity (GHSV) of 40,000 h−1 could be obtained over this sample. Furthermore, the NO conversion was still higher than 65% when 100 ppm SO2 was introduced to the reaction gas for 4 h. These could be primarily attributed to the large specific surface area, high surface acidity concentration and abundant chemisorbed oxygen species provided by the hierarchical pore structure, which could also increase the mass transfer of the reaction gas. This finding suggests that the NH3-SCR activity and SO2 poisoning tolerance of hierarchical MnOx/SAPO-34 catalysts at low temperatures can be improved by controlling the morphology of the catalysts, which might supply a rational strategy for the design and synthesis of Mn-based SCR catalysts.

Molybdenum-decorated V2O5–WO3/TiO2: surface engineering toward boosting the acid cycle and redox cycle of NH3-SCR

Submonolayer Mo-decorated V₂O₅–WO₃/TiO₂ provides abundant vanadia species and unsaturated V⁴⁺ species, accelerating the acid and redox cycling of low-temperature NH₃-SCR.

Formation mechanism of MnxCo3−xO4 yolk–shell structures

Formation of Mn_xCo_3−xO₄ yolk–shell microspheres via a solvothermal reaction of hydrated cobalt and manganese nitrates in ethanol is investigated. Spinel nanocrystals of cobalt oxide or cobalt-rich ternary oxide preferentially develop in the system, while manganese-rich hydroxide form Mn(OH)₂-type nanosheets. Instead of continuing to grow individually, the nanocrystallites and nanosheets aggregate into large microspheres due to their strong inter-particle interaction. When the proportion of Mn-rich nanosheets is high, therefore the overall density is low, dehydration of hydroxide nanosheets and a surface re-crystallisation lead to formation of a dense and rigid shell, which is separated from a solid or hollow core via a further Ostwald ripening process. The proposed formation mechanism of the yolk–shell structures based on electron microscopic studies would help us to develop yolk–shell structure based multifunctional materials.

A formation mechanism of yolk–shell microspheres of Mn-rich spinel Mn_xCo_3−xO₄ is proposed based on the analyses of microstructures and local compositions.

Recent advances in layered double hydroxides (LDHs) derived catalysts for selective catalytic reduction of NOx with NH3

In recent years, layered double hydroxides (LDHs) derived metal oxides as highly efficient catalysts for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) have attracted great attention. The high dispersibility and interchangeability of cations within the brucite-like layers make LDHs an indispensable branch of catalytic materials. With the increasingly stringent and ultra-low emission regulations, there is an urgent need for highly efficient and stable low-medium temperature denitration catalysts in markets. In this contribution, we have critically summarized the recent research progress in the LDHs derived NH₃-SCR catalysts, including their ability for NO_x removal, N₂ selectivity, active temperature window, stability and resistance to poisoning. The advantages and defects of various types of LDHs-derived catalysts are comparatively summarized, and the corresponding modification strategies are discussed. In addition, considering the importance of the catalyst's resistance to poisoning in practical applications, we discuss the poisoning mechanism of each component in flue gases, and provide the corresponding strategies to improve the poisoning resistance of catalysts. Finally, from the perspective of practical applications and operation cost, the regeneration measures of catalysts after poisoning is also discussed. We hope that this work can give timely technical guidance and valuable insights for the applications of LDHs materials in the field of NO_x control.

A novel self-assembled-derived 1D MnO2@Co3O4 composite as a high-performance Li-ion storage anode material

Manganese dioxide (MnO₂) is a high-performance anodic material and applied widely in lithium-ion batteries (LIBs).

Ultralow loading of nanostructured Mn species onto two-dimensional Co3O4 nanosheets for selective catalytic reduction of NOx with NH3

We report a facile method for dispersing Mn species onto two-dimensional Co₃O₄ nanosheets at the nanoscale for the selective catalytic reduction (SCR) of NO_x with NH₃.

Formation of uniform porous yolk-shell MnCo2O4 microrugby balls with enhanced electrochemical performance for lithium storage and the oxygen evolution reaction

Mixed transition metal oxides with favorable electrochemical properties are promising electrode materials in energy storage and conversion systems. In this work, uniform porous yolk-shell MnCo₂O₄ (denoted as YSM-MCO) microrugby balls have been synthesized by simple annealing treatment of metal carbonates with a microrugby ball shape in air. Benefiting from the desired porous structure and composition, the as-synthesized YSM-MCO exhibits enhanced electrochemical performance when investigated as anode materials for lithium-ion batteries and electrocatalysts for the oxygen evolution reaction. The YSM-MCO demonstrates remarkable lithium storage properties with a good cycling stability (94% capacity retention over 200 cycles at 0.5 A g^-1) and superior rate capability (414 mA h g^-1 at 5 A g^-1). In addition, the YSM-MCO also exhibits better OER activity than most of the reported MnCo₂O₄-based electrocatalysts.

Enhancement of NH3-SCR performance of LDH-based MMnAl (M = Cu, Ni, Co) oxide catalyst: influence of dopant M

Transition metal (Cu, Ni, Co) doped MnAl mixed oxide catalysts were prepared through a novel method involving the calcination of hydrotalcite precursors for the selective catalytic reduction of NO x with NH3 (NH3-SCR). The effects of transition metal modification were confirmed by means of XRD, BET, TEM, XPS, NH3-TPD, and H2-TPR measurements. Experimental results evidenced that CoMnAl-LDO presented the highest NO x removal efficiency of over 80% and a relatively high N2 selectivity of over 88% in a broad working temperature range (150-300 °C) among all the samples studied. Moreover, the CoMnAl-LDO sample possessed better stability and excellent resistance to H2O and SO2. The reasons for such results could be associated with the good dispersion of Co3O4 and MnO x , which could consequently provide optimum redox behavior, plentiful acid sites, and strong NO x adsorption ability. Furthermore, dynamics calculations verified the meaningful reduction in apparent activation energy (E a) for the CoMnAl-LDO sample, which is in agreement with the DeNO x activity.

A Review of Low Temperature NH3-SCR for Removal of NOx

The importance of the low-temperature selective catalytic reduction (LT-SCR) of NOx by NH3 is increasing due to the recent severe pollution regulations being imposed around the world. Supported and mixed transition metal oxides have been widely investigated for LT-SCR technology. However, these catalytic materials have some drawbacks, especially in terms of catalyst poisoning by H2O or/and SO2. Hence, the development of catalysts for the LT-SCR process is still under active investigation throughout seeking better performance. Extensive research efforts have been made to develop new advanced materials for this technology. This article critically reviews the recent research progress on supported transition and mixed transition metal oxide catalysts for the LT-SCR reaction. The review covered the description of the influence of operating conditions and promoters on the LT-SCR performance. The reaction mechanism, reaction intermediates, and active sites are also discussed in detail using isotopic labelling and in situ FT-IR studies.

MoO₃-Doped MnCo₂O₄ Microspheres Consisting of Nanosheets: An Inexpensive Nanostructured Catalyst to Hydrolyze Ammonia Borane for Hydrogen Generation

Production of hydrogen by catalytically hydrolyzing ammonia borane (AB) has attracted extensive attention in the field of catalysis and energy. However, it is still a challenge to develop a both inexpensive and active catalyst for AB hydrolysis. In this work, we designed a series of MoO₃-doped MnCo₂O₄ (x) catalysts, which were fabricated by a hydrothermal process. The morphology, crystalline structure, and chemical components of the catalysts were systematically analyzed. The catalytic behavior of the catalyst in AB hydrolysis was investigated. Among these catalysts, MoO₃-doped MnCo₂O₄ (0.10) microspheres composed of nanosheets exhibited the highest catalytic activity. The apparent activation energy is 34.24 kJ mol⁻¹ and the corresponding turnover frequency is 26.4 mol_hydrogen min⁻¹ mol_cat⁻¹. Taking into consideration the low cost and high performance, the MoO₃-doped MnCo₂O₄ (0.10) microspheres composed of nanosheets represent a promising catalyst to hydrolyze AB for hydrogen production.

Boron-doped graphene nanosheet-supported Pt: a highly active and selective catalyst for low temperature H2-SCR

A series of boron-doped graphene-supported Pt (Pt/BG) nanosheets were designed and synthesized using a one-step facile hydrothermal method. ICP, XPS, and TPD results confirmed that boron atoms were successfully embedded into the graphene matrix. The selective catalytic reduction of nitric oxide with hydrogen (H2-SCR) was tested over Pt/BG catalysts. The multi-roles of doped-boron were investigated by Raman, BET, CO-chemisorption, H2-TPD, XPS, and NO-TPD. Boron doping led to a higher dispersion and smaller size of Pt nanoparticles, facilitated hydrogen spillover, promoted more metallic Pt formation, and increased both H2 and NO chemisorption, which were attributed to an enhanced Pt nucleation rate over doped-boron, electron donation from boron to Pt, and extra chemisorption sites. The reaction performances (conversion 94.7%, selectivity 90.3%, and TOF 0.092 s-1) were greatly promoted attributing to a bifunctional catalytic mechanism. This work paves the way to modify the structure and tune the chemisorption ability of graphene-based catalysts, and provides novel insights for designing high performance catalysts.

The synthesis of CuyMnzAl1−zOx mixed oxide as a low-temperature NH3-SCR catalyst with enhanced catalytic performance

A new type of low-temperature selective catalytic reduction (SCR) catalyst, Cu_yMn_zAl_1−zO_x, derived from layered double hydroxides is presented in this contribution.

A general strategy for the in situ decoration of porous Mn-Co bi-metal oxides on metal mesh/foam for high performance de-NOx monolith catalysts

Owing to their advantages of strong mechanical stability, plasticity, thermal conductivity and mass transfer ability, metal foam or meshes are considered promising monolith supports for de-NO_x application. In this work, we developed a facile method for the decoration of porous Mn-Co bi-metal oxides on Fe meshes. The block-like structure was derived from in situ coating, and simultaneous nucleation and growth of the Mn-Co hydroxide precursor, while the porous Mn-Co oxides were formed via the calcination process. Moreover, the decoration of the high-purity Co₂MnO₄ spinel could lead to enhanced reducibility and adsorption behaviors, which are crucial to the catalytic process. Of note is the fact that the Fe mesh used in the synthesis procedure could be substituted by various metal supports including Ti mesh, Cu foam and Ni foam. Driven by the above motivations, metal supports decorated with Mn-Co oxides were evaluated as monolith de-NO_x catalysts for the first time. Inspiringly, these catalysts demonstrate outstanding low-temperature catalytic activity, desirable stability and excellent H₂O resistance. This work might open up a new path for the design and development of high performance de-NO_x monolith catalysts.

Fabrication of oxidase-like hollow MnCo2O4 nanofibers and their sensitive colorimetric detection of sulfite and l-cysteine

Hollow MnCo₂O₄ nanofibers as efficient oxidase mimics for sensitive detection of sulfite and l-cysteine have been developed.

Mn–Fe bi-metal oxides in situ created on metal wire mesh as monolith catalysts for selective catalytic reduction of NO with NH3

Mn–Fe bi-metal oxides in situ created on a metal wire mesh are demonstrated as high-performance deNO_x monolith catalysts.