Boron nitride nanosheets as barrier enhancing fillers in melt processed composites

Effective role of tannic acid in the fabrication of hydrophobic, oleophilic, antibacterial, boron nitride/chlorobutyl rubber nanocomposite for reusable protective clothing and oil-water separation

Boron Nitride (h-BN) possesses unique qualities like increased thermal conductivity, non-toxic nature, and environmental friendliness; hence, it is a good reinforcing agent for chlorobutyl rubber (CIIR). Tannic acid (TA) holds excellent bio-functional properties and is considered as an exceptional bio-exfoliating agent. Hence, in this study, we have utilized the bio-exfoliating ability of TA to exfoliate h-BN and evaluate its efficiency in reinforcing the CIIR matrix. Results demonstrate the exceptional role of tannic acid in imparting multifunctionality to chlorobutyl rubber. CIIR matrix introduced with h-BN:TA (h-BN:TA/CIIR) display excellent mechanical performance due to the reinforcing effect shown by excess TA in addition to the exfoliating effect. In addition, h-BN:TA/CIIR composite exhibited superior antimicrobial activity against S. aureus. The retention of thermal decontamination efficiency of the composites with increase in the number of cycles ensures their promising application in the field of reusable gloves and chemical protective clothing. The exfoliated filler created a tortuous path inside the matrix which prevents the permeation of solvent. Hence the work intends to synergize the hydrophobic nature of h-BN, exfoliating capacity of TA and the barrier abilities of CIIR for the adsorption of oil from oil-water mixture and portrays the future of the trio in water purification.

Montmorillonite Exfoliation in LLDPE and Factors Affecting Its Orientation: From Monolayer to Multi-Nano-Layer Polymer Films

The motivations of the present work are to investigate the exfoliation of montmorillonite within a linear low-density polyethylene matrix and to control its orientation during the cast extrusion process. The first part is focused on the exfoliation of the montmorillonite through the melt extrusion process. The accuracy and relevance of each method used to determine the exfoliation state of montmorillonite have been examined, thanks to X-ray diffraction, transmission electronic microscopy, and rheology. All these methods have presented limitations, but the combination of all leads to a better estimation of the exfoliation state. Finally, the orientation of the montmorillonite is quantified systematically by X-ray texture analysis and correlated with process parameters to discern which one is affecting their orientation. The results have demonstrated an enhancement of the "in-plane" orientation of the montmorillonite with the exfoliation, especially at high concentration and when combined with cast extrusion. Finally, in the multi-nano-layer polymer film configuration, the reduction of the individual layers 29 nm thickness leads to some orientation improvements. However, these improvements are almost at the same level as the concentration effect in a monolayer system. This work gives an overview of all the parameters needed to achieve a significant organo-modified montmorillonite "in-plane" orientation.

The Influence of the Size of BN NSs on Silkworm Development and Tissue Microstructure

Boron nitride nanosheets (BN NSs) have emerged as promising materials in a wide range of biomedical applications. Despite the extensive studies on these bio-nano interfacial systems, one critical concern is their toxicity, which is affected by a variety of factors, including size. This study aimed at assessing the relationship between BN NSs size and toxicity. Two silkworm strains (qiufeng × baiyu and Nistari 7019) were used as model organisms to investigate the effect of different sizes of BN NSs (BN NSs-1, thickness of 41.5 nm and diameter of 270.7 nm; BN NSs-2, thickness of 48.2 nm and diameter of 562.2 nm) on silkworm mortality, growth, cocoon weight, and tissue microstructure. The findings show that exposure to BN NSs in this work has no lethal adverse effects on silkworm growth or tissue microstructure. BN NSs have a higher effect on the growth rate of qiufeng × baiyu compared to Nistari 7019, demonstrating that the same treatment does not favorably affect the Nistari 7019 strain, as there is no significant increase in cocoon weight. Overall, the study suggests that the sizes of BN NSs employed in this study are relatively safe and have less negative impact on silkworms. This offers significant insights into the effect of BN NSs size, a crucial factor to consider for their safe use in biomedical applications.

Effect of Ambient Plasma Treatments on Thermal Conductivity and Fracture Toughness of Boron Nitride Nanosheets/Epoxy Nanocomposites

With the rapid growth in the miniaturization and integration of modern electronics, the dissipation of heat that would otherwise degrade the device efficiency and lifetime is a continuing challenge. In this respect, boron nitride nanosheets (BNNS) are of significant attraction as fillers for high thermal conductivity nanocomposites due to their high thermal stability, electrical insulation, and relatively high coefficient of thermal conductivity. Herein, the ambient plasma treatment of BNNS (PBNNS) for various treatment times is described for use as a reinforcement in epoxy nanocomposites. The PBNNS-loaded epoxy nanocomposites are successfully manufactured in order to investigate the thermal conductivity and fracture toughness. The results indicate that the PBNNS/epoxy nanocomposites subjected to 7 min plasma treatment exhibit the highest thermal conductivity and fracture toughness, with enhancements of 44 and 110%, respectively, compared to the neat nanocomposites. With these enhancements, the increases in surface free energy and wettability of the PBNNS/epoxy nanocomposites are shown to be attributable to the enhanced interfacial adhesion between the filler and matrix. It is demonstrated that the ambient plasma treatments enable the development of highly dispersed conductive networks in the PBNNS epoxy system.

Challenges and issues with the performance of boron nitride rooted membrane for gas separation

Various fillers such as zeolites, metal-organic framework, carbon, metal framework, graphene, and covalent organic framework have been incorporated into the polymers. However, these materials are facing issues such as incompatibility with the polymer matrix, which leads to the formation of non-selective voids and thus, reduces the gas separation properties. Recent studies show that hexagonal boron nitride (h-BN) possesses attractive characteristics such as high aspect ratio, good compatibility with polymer materials, enhanced gas barrier performance, and improved mechanical properties, which could make h-BN the potential candidate to replace conventional fillers. The synthesis of materials and membranes is the subject of this review, which focuses on recent developments and ongoing problems. Additionally, a summary of the mathematical models that were utilised to forecast how well polymer composites would perform in gas separation is provided. It was found in the previous studies that tortuosity is the governing factor for the determination of the effectiveness of a nanofiller as a gas barrier enhancer in polymer matrices. The shape of the nanofiller particles and sheets, disorientation and distribution of the nanofillers within the polymer matrix, state of aggregation and rate of reaggregation of the nanofiller particles, as well as the compatibility of the nanofiller with the polymer matrix all played a significant role in determining how well a particular nanofiller will perform in enhancing the gas barrier properties of the nanocomposites. For this purpose, this review has been focused not only on the experimentation work but also on the effect of tortuosity, exfoliation quality, compatibility, disorientation, and reaggregation of nanofillers.

Filler Models Revisited: Extension of the Nielson Model with Respect to the Geometric Arrangements of Fillers

Models describing how fillers affect the barrier properties of polymers remain an important research topic to improve applications such as hydrogen storage or food preservation. The Nielsen model, one of the earliest models for such predictions, is still one of the most widely used in the literature. However, it does not provide quantitative information on arrangements of fillers inside a polymer matrix, which is crucial for the definition of suitable filler distributions in barrier materials. Therefore, the channel model was developed in this work, which extends the Nielsen model by determining the relative distances between the fillers in regular filler arrangements in polymer matrices. This allows us to relate the permeation properties of filled polymer membranes to the geometric properties of the filler arrangement in simulations and experimental measurements. Simulations with geometries defined according to the channel model showed good agreement with the predictions of the Nielsen model. This demonstrated that the channel model can be a valuable tool for predicting at least mean geometric distances in studied polymer membranes. The validity range of the channel model was limited to a value range of the filler volume fraction 0.01≤ϕf≤0.5 based on theoretical considerations.

Structure, Properties and Applications of Two-Dimensional Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN) has emerged as a strong candidate for two-dimensional (2D) material owing to its exciting optoelectrical properties combined with mechanical robustness, thermal stability, and chemical inertness. Super-thin h-BN layers have gained significant attention from the scientific community for many applications, including nanoelectronics, photonics, biomedical, anti-corrosion, and catalysis, among others. This review provides a systematic elaboration of the structural, electrical, mechanical, optical, and thermal properties of h-BN followed by a comprehensive account of state-of-the-art synthesis strategies for 2D h-BN, including chemical exfoliation, chemical, and physical vapor deposition, and other methods that have been successfully developed in recent years. It further elaborates a wide variety of processing routes developed for doping, substitution, functionalization, and combination with other materials to form heterostructures. Based on the extraordinary properties and thermal-mechanical-chemical stability of 2D h-BN, various potential applications of these structures are described.

Fabrication of thermally conductive polymer composites based on hexagonal boron nitride: recent progresses and prospects

Hexagonal boron nitride (h-BN) and its nanomaterials are among the most promising candidates for use in thermal management applications because of their high thermal conductivity, thermal stability, and good electric insulation, and when used as the conductive fillers, they enhance the overall properties of polymer composites. In this review, the basic concepts of h-BN are introduced, followed by the synthesis of BN nanotubes and BN nanosheets. Then, various novel methods to fabricate h-BN polymer composites with improved thermally conductive paths are discussed. They can be classified into two categories: dispersion and compatibility reinforced and structure formation. In addition, the thermal conducting mechanisms of h-BN composites are proposed. Finally, the advantages and limitations of aforementioned strategies are summarized.

Enhanced gas barrier properties of polymer substrates for flexible OLEDs by adjusting the backbone rigidity and incorporating 2D nanosheets

Ultra-high T_g, low CTE and great ductility as well as a high barrier performance are embodied in PI nanocomposite films.

Enhancement of thermal and mechanical properties of few layer boron nitride reinforced PET composite

Polyethylene terephthalate-based nanocomposites with hexagonal boron nitride nanosheets (BNNs) were prepared by a solution casting method with varying concentrations of BNNs from 0.5 wt% to 4 wt%. Melting and crystallization behaviour of the composites were investigated by differential scanning calorimetry, which suggests that with increasing presence of nanosheets, the crystallinity increases and hence the polyethylene terephthalate chain mobility gets restricted, which leads to suppression of crystal growth. The nanoindentation measurements on the composite films exhibit improved mechanical properties. Enhancement of 33.3% of elastic modulus and 32.4% of hardness was observed with 2 wt% infusion of boron nitride nanosheets in polyethylene terephthalate.

High-Throughput Continuous Production of Shear-Exfoliated 2D Layered Materials using Compressible Flows

2D nanomaterials are finding numerous applications in next-generation electronics, consumer goods, energy generation and storage, and healthcare. The rapid rise of utility and applications for 2D nanomaterials necessitates developing means for their mass production. This study details a new compressible flow exfoliation method for producing 2D nanomaterials using a multiphase flow of 2D layered materials suspended in a high-pressure gas undergoing expansion. The expanded gas-solid mixture is sprayed in a suitable solvent, where a significant portion (up to 10% yield) of the initial hexagonal boron nitride material is found to be exfoliated with a mean thickness of 4.2 nm. The exfoliation is attributed to the high shear rates (γ˙ > 10⁵ s^-1 ) generated by supersonic flow of compressible gases inside narrow orifices and converging-diverging channels. This method has significant advantages over current 2D material exfoliation methods, such as chemical intercalation and exfoliation, as well as liquid phase shear exfoliation, with the most obvious benefit being the fast, continuous nature of the process. Other advantages include environmentally friendly processing, reduced occurrence of defects, and the versatility to be applied to any 2D layered material using any gaseous medium. Scaling this process to industrial production has a strong possibility of reducing the cost of creating 2D nanomaterials.

Polymer composites based on hexagonal boron nitride and their application in thermally conductive composites

Hexagonal boron nitride (h-BN) is also referred to as "white graphite". Owing to its two-dimensional planar structure, its thermal conductivity along and perpendicular to a basal plane is anisotropic. However, h-BN exhibits properties that are distinct from those of graphite, such as electric insulation, superior antioxidative ability, and purely white appearance. These qualities render h-BN superior as a filler in composites that require thermal conductivity while exhibiting electric insulation. Since the thermal performance of composites is mainly affected by thermal pathways, this article begins with an overall introduction of the preparation of boron nitride nanosheets, followed by a review of the fabrication of h-BN-filled composites. Lastly, the construction of thermally conductive networks is discussed.

Sustainable Boron Nitride Nanosheet-Reinforced Cellulose Nanofiber Composite Film with Oxygen Barrier without the Cost of Color and Cytotoxicity

This paper introduces a boron nitride nanosheet (BNNS)-reinforced cellulose nanofiber (CNF) film as a sustainable oxygen barrier film that can potentially be applied in food packaging. Most commodity plastics are oxygen-permeable. CNF exhibits an ideal oxygen transmission rate (OTR) of <1 cc/m²/day in highly controlled conditions. A CNF film typically fabricated by the air drying of a CNF aqueous solution reveals an OTR of 19.08 cc/m²/day. The addition of 0⁻5 wt % BNNS to the CNF dispersion before drying results in a composite film with highly improved OTR of 4.7 cc/m²/day, which is sufficient for meat and cheese packaging. BNNS as a 2D nanomaterial increases the pathway of oxygen gas and reduces the chances of pinhole formation during film fabrication involving water drying. In addition, BNNS improves the mechanical properties of the CNF films (Young's modulus and tensile strength) without significant elongation reductions, probably due to the good miscibility of CNF and BNNS in the aqueous solution. Addition of BNNS also produces negligible color change, which is important for film aesthetics. An in vitro cell experiment was performed to reveal the low cytotoxicity of the CNF/BNNS composite. This composite film has great potential as a sustainable high-performance food-packaging material.

Graphene-coated polymer foams as tuneable impact sensors

The use of graphene-based nanocomposites as electromechanical sensors has been broadly explored in recent times with a number of papers describing porous, foam-like composites. However, there are no reported foam-based materials that are capable of large dynamic compressive load measurements and very few studies on composite impact sensing. In this work, we describe a simple method of infusing commercially-available foams with pristine graphene to form conductive composites, which we refer to as G-foam. Displaying a strain-dependent electrical response, G-foam was found to be a reasonably effective pressure sensing material. More interestingly, G-foam is a sensitive impact-sensing material. Through the addition of various amounts of polymer filler, the mechanical properties of the composites can be tuned leading to the controllable variation of the impact sensing range. We have developed a simple model which quantitatively explains all our impact sensing data.

Lateral size selection of liquid exfoliated hexagonal boron nitride nanosheets

Hexagonal boron nitride (h-BN) is of great importance in imaging, thermal and quantum applications in the mid-infrared regions (most of which are size related) for its natural hyperbolic properties. Liquid exfoliation is a promising production approach, however it is limited by the wide range of nanosheet length and thickness. Here we demonstrate a simple and effective method to sort the exfoliated nanosheets according to their lateral sizes. The process uses a combination of low-rate and high-rate configurations to separate the lateral lengths ranging from 1 to 3 μm. In contrast to Raman spectroscopy, infrared results exhibit intensive dependence on the nanosheet length, where the E_1u phonon frequency and intensity ratio of E_1u to A_2u modes are significantly sensitive to the nanosheet length owing to the large anisotropy between the in-plane and out-of-plane axes.

Hexagonal boron nitride (h-BN) is of great importance in imaging, thermal and quantum applications in the mid-infrared regions (most of which are size related) for its natural hyperbolic properties.

Role of enhanced solubility in esterification of 2,5-furandicarboxylic acid with ethylene glycol at reduced temperatures: energy efficient synthesis of poly(ethylene 2,5-furandicarboxylate)

The enhanced solubility of 2,5-furandicarboxylic acid in ethylene glycol results in faster kinetics at lower temperatures compared to conventional reaction temperatures for polyesters.

Cosolvents as Liquid Surfactants for Boron Nitride Nanosheet (BNNS) Dispersions

Despite a range of promising applications, liquid-phase exfoliation of boron nitride nanosheets (BNNSs) is limited, both by low yield in common solvents as well as the disadvantages of using dissolved surfactants. One recently reported approach is the use of cosolvent systems to increase the as-obtained concentration of BNNS; the role of these solvents in aiding exfoliation and/or aiding colloidal stability of BNNSs is difficult to distinguish. In this paper, we have investigated the use of a t-butanol/water cosolvent to disperse BNNSs. We utilize solvent-exchange experiments to demonstrate that the t-butanol is in fact essential to colloidal stability; we then utilized molecular dynamics simulations to explore the mechanism of t-butanol/BNNS interactions. Taken together, the experimental and simulation results show that the key to the success of t-butanol (as compared to the other alcohols of higher or lower molecular weight) lies in its ability to act as a "liquid dispersant" which allows it to favorably interact with both water and BNNSs. Additionally, we show that the stable dispersions of BNNS in water/t-butanol systems may be freeze-dried to yield nonaggregated, redispersible BNNS powders, which would be useful in an array of industrial processes.

Production of Two-Dimensional Nanomaterials via Liquid-Based Direct Exfoliation

Tremendous efforts have been devoted to the synthesis and application of two-dimensional (2D) nanomaterials due to their extraordinary and unique properties in electronics, photonics, catalysis, etc., upon exfoliation from their bulk counterparts. One of the greatest challenges that scientists are confronted with is how to produce large quantities of 2D nanomaterials of high quality in a commercially viable way. This review summarizes the state-of-the-art of the production of 2D nanomaterials using liquid-based direct exfoliation (LBE), a very promising and highly scalable wet approach for synthesizing high quality 2D nanomaterials in mild conditions. LBE is a collection of methods that directly exfoliates bulk layered materials into thin flakes of 2D nanomaterials in liquid media without any, or with a minimum degree of, chemical reactions, so as to maintain the high crystallinity of 2D nanomaterials. Different synthetic methods are categorized in the following, in which material characteristics including dispersion concentration, flake thickness, flake size and some applications are discussed in detail. At the end, we provide an overview of the advantages and disadvantages of such synthetic methods of LBE and propose future perspectives.

Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications

Chemical and physical functionalization of hexagonal boron nitride materials breeds new properties and applications.

Enhancing the mechanical and thermal properties of boron nitride nanoplatelets/elastomer nanocomposites by latex mixing

Hexagonal boron nitride nanoplatelets (BNNPs) can serve as two-dimensional (2D) fillers for elastomer nanocomposites due to their excellent and intriguing mechanical and thermal properties.

Boron-nitrogen doped carbon scaffolding: organic chemistry, self-assembly and materials applications of borazine and its derivatives

Discovered by Stock and Pohland in 1926, borazine is the isoelectronic and isostructural inorganic analogue of benzene, where the C[double bond, length as m-dash]C bonds are substituted by B-N bonds. The strong polarity of such heteroatomic bonds widens the HOMO-LUMO gap of the molecule, imparting strong UV-emitting/absorption and electrical insulating properties. These properties make borazine and its derivatives valuable molecular scaffolds to be inserted as doping units in graphitic-based carbon materials to tailor their optoelectronic characteristics, and specifically their semiconducting properties. By guiding the reader through the most significant examples in the field, in this feature paper we describe the past and recent developments in the organic synthesis and functionalisation of borazine and its derivatives. These boosted the production of a large variety of tailored derivatives, broadening their use in optoelectronics, H2 storage and supramolecular functional architectures, to name a few.