Conjugatable water-soluble Pt(II) and Pd(II) porphyrin complexes: novel nano- and molecular probes for optical oxygen tension measurement in tissue engineering

Water-soluble platinum and palladium porphyrins with peripheral ethyl phosphonic acid substituents: synthesis, aggregation in solution, and photocatalytic properties

Water-soluble porphyrins have garnered significant attention due to their broad range of applications in biomedicine, catalysis, and material chemistry. In this work, water-soluble platinum(II) and palladium(II) complexes with porphyrins bearing ethyl phosphonate substituents, namely, Pt/Pd 10-(ethoxyhydroxyphosphoryl)-5,15-di(p-carboxyphenyl)porphyrins (M3m, M = Pt(II), Pd(II)) and Pt/Pd 5,10-bis(ethoxyhydroxyphosphoryl)-10,20-diarylporphyrins (M1d-M3d; aryl = p-tolyl (1), mesityl (2), p-carboxyphenyl (3)), were synthesized by alkaline hydrolysis of the corresponding diethyl phosphonates M6m and M4d-M6d. NMR, UV-vis, and fluorescence spectroscopy revealed that the mono-phosphonates M3m tend to form aggregates in aqueous media, while the bis-phosphonates M3d exist predominantly as monomeric species across a wide range of concentrations (10-6-10-3 M), ionic strengths (0-0.81 M), and pH values (4-12). Single-crystal X-ray diffraction studies of the diethyl phosphonates Pt6d and Pd6d revealed that π-π stacking of the aromatic macrocycles is sterically hindered in the crystals, providing a rationale for the low degree of solution aggregation observed for ethyl phosphonate M3d. Photophysical studies of M3m and M1d-M3d demonstrated that these compounds are phosphorescent and generate singlet oxygen in aqueous solutions. Pd(II) complex Pd3d is an excellent photocatalyst for the oxidation of sulfides using di-oxygen in a solvent mixture (MeCN/H2O, 4 : 1 v/v). Under these conditions, various alkyl and aryl sulfides were quantitatively converted into the desired sulfoxides. For the oxygenation of mixed alkyl-aryl sulfides, Pd3d outperforms Pd(II) meso-tetrakis(p-carboxyphenyl)porphyrin (PdTCPP). This photocatalyst can be recycled and reused to afford sulfoxides with no loss of product yield.

Mapping the influence of ligand electronics on the spectroscopic and 1O2 sensitization characteristics of Pd(II) biladiene complexes bearing phenyl-alkynyl groups at the 2- and 18-positions

Photodynamic therapy (PDT) is a promising treatment for certain cancers that proceeds via sensitization of ground state 3O2 to generate reactive 1O2. Classic macrocyclic tetrapyrrole ligand scaffolds, such as porphyrins and phthalocyanines, have been studied in detail for their 1O2 photosensitization capabilities. Despite their compelling photophysics, these systems have been limited in PDT applications because of adverse biological side effects. Conversely, the development of non-traditional oligotetrapyrrole ligands metalated with palladium (Pd[DMBil1]) have established new candidates for PDT that display excellent biocompatibility. Herein, the synthesis, electrochemical, and photophysical characterization of a new family of 2,18-bis(phenylalkynyl)-substituted PdII 10,10-dimethyl-5,15-bis(pentafluorophenyl)-biladiene (Pd[DMBil2-R]) complexes is presented. These second generation biladienes feature extended conjugation relative to previously characterized PdII biladiene scaffolds (Pd[DMBil1]). We show that these new derivatives can be prepared in good yield and, that the electronic nature of the phenylalkynyl appendages dramatically influence the PdII biladiene photophysics. Extending the conjugation of the Pd[DMBil1] core through installation of phenylacetylene resulted in a ∼75 nm red-shift of the biladiene absorption spectrum into the phototherapeutic window (600-900 nm), while maintaining the PdII biladiene's steady-state spectroscopic 1O2 sensitization characteristics. Varying the electronics of the phenylalkyne groups via installation of electron donating or withdrawing groups dramatically influences the steady-state spectroscopic and photophysical properties of the resulting Pd[DMBil2-R] family of complexes. The most electron rich variants (Pd[DMBil2-N(CH3)2]) can absorb light as far red as ∼700 nm but suffer from significantly reduced ability to sensitize formation of 1O2. By contrast, Pd[DMBil2-R] derivatives bearing electron withdrawing functionalities (Pd[DMBil2-CN] and Pd[DMBil2-CF3]) display 1O2 quantum yields above 90%. The collection of results we report suggest that excited state charge transfer from more electron-rich phenyl-alkyne appendages to the electron deficient biladiene core circumvents triplet sensitization. The spectral and redox properties, as well as the triplet sensitization efficiency of each Pd[DMBil2-R] derivative is considered in relation to the Hammett value (σp) for each biladiene's R-group. More broadly, the results reported in this study clearly demonstrate that biladiene redox properties, spectral properties, and photophysics can be perturbed greatly by relatively minor alterations to biladiene structure.

A Microfluidic, Flow-Through, Liquid Reagent Fluorescence Sensor Applied to Oxygen Concentration Measurement

A concept of a microfluidic fluorescent chemical sensing system is presented and demonstrated as a sensor for measurement of dissolved oxygen in water. The system utilizes on-line mixing of a fluorescent reagent with the analyzed sample, while it measures the fluorescence decay time of the mixture. The system is built entirely out of silica capillaries and optical fibers, and allows for very low consumption of the reagent (of the order of mL/month) and the analyzed sample (of the order of L/month). The proposed system can, thus, be applied to continuous on-line measurements, while utilizing a broad variety of different and proven fluorescent reagents or dyes. The proposed system allows for the use of relatively high-excitation light powers, as the flow-through concept of the system reduces the probability of the appearance of bleaching, heating, or other unwanted effects on the fluorescent dye/reagent caused significantly by the excitation light. The high amplitudes of fluorescent optical signals captured by an optical fiber allow for low-noise and high-bandwidth optical signal detection, and, consequently, the possibility for utilization of reagents with nanosecond fluorescent lifetimes.

Ohmic heating-assisted synthesis and characterization of Zn(II), Cu(II) and Pd(II) complexes of heterocyclic-fused chlorins

Chlorins are highly interesting compounds due to their spectroscopic properties in both UV-Vis and NIR regions. Upon coordination to a metal ion, the corresponding metallochlorins exhibit more valuable physicochemical properties that enable a broader range of applications, such as in photodynamic therapy (PDT), water splitting catalysis, optical sensor devices and dye-sensitized solar cells. Synthetic chemistry has been in a continuous quest to fulfil most green chemistry requirements through the development of efficient reactions. Being a heating process that does not depend on heat transfer to the reaction medium, ohmic heating accomplishes the mentioned requirements and allows a fast and uniform heating regime thanks to the ionic conductivity of the reaction medium. Herein, we report the metallation of pyrrolidine- and isoxazolidine-fused chlorins with Zn(II), Cu(II) and Pd(II) salts by ohmic heating, using non-toxic aqueous solutions, and their corresponding physico-chemical characterization. All pyrrolidine-fused chlorins showed higher yields, when compared with isoxazolidine ones. From the thermogravimetric analysis performed it is possible to infer that the metal enhances the steadiness of the macrocycle, making it easier to cause the thermal decomposition of the pyrrolidine- and isoxazolidine-fused chlorins. The Zn(II) complexes showed high absorption in the NIR spectral region, a low fluorescence quantum yield and a short excited singlet state, which indicate the high efficiency of intersystem crossing to the triplet state, making them very promising candidates as photosensitizers for PDT.

Optimization of Oxygen Delivery Within Hydrogels

The field of tissue engineering has been continuously evolving since its inception over three decades ago with numerous new advancements in biomaterials and cell sources and widening applications to most tissues in the body. Despite the substantial promise and great opportunities for the advancement of current medical therapies and procedures, the field has yet to capture wide clinical translation due to some remaining challenges, including oxygen availability within constructs, both in vitro and in vivo. While this insufficiency of nutrients, specifically oxygen, is a limitation within the current frameworks of this field, the literature shows promise in new technological advances to efficiently provide adequate delivery of nutrients to cells. This review attempts to capture the most recent advances in the field of oxygen transport in hydrogel-based tissue engineering, including a comparison of current research as it pertains to the modeling, sensing, and optimization of oxygen within hydrogel constructs as well as new technological innovations to overcome traditional diffusion-based limitations. The application of these findings can further the advancement and development of better hydrogel-based tissue engineered constructs for future clinical translation and adoption.

Fast, facile, base-free microwave-assisted metallation of bacteriochlorophylls and corresponding high yield synthesis of TOOKAD

Naturally-derived metallo-bacteriochlorophylls have attracted much attention since their clinical approval for cancer photodynamic therapy. Their therapeutic properties are rooted in the metal complexation of bacteriochlorophylls, which endows them with optical properties favourable for biophotonic and biomedical applications, including near-infrared light-activated reactive oxygen species generation at therapeutic levels. Despite these advantages, the utility of these chromophores has been limited by synthetic challenges associated with bacteriochlorophyll metallation; specifically, a slow reaction rate and necessity of complex purification procedures remain barriers towards metalated bacteriochlorophyll synthesis. Here, these limitations are overcome through the development of a new fast, facile, efficient, base-free microwave heating metallation method for the synthesis of a series of metallo (Pd, Cu, Zn, Cd, Sn, In, Mn, Co) bacteriopyropheophorbides. The preparation and structural and optical spectral characterization of these complexes are presented. This microwave-enabled synthetic method is then applied to generate the clinical photosensitizer agent Pd-bacteriopheophorbide (TOOKAD) effectively and efficiently, followed by validation of its metallation-enhanced ROS generation.

Peptide-Tetrapyrrole Supramolecular Self-Assemblies: State of the Art

The covalent and noncovalent association of self-assembling peptides and tetrapyrroles was explored as a way to generate systems that mimic Nature's functional supramolecular structures. Different types of peptides spontaneously assemble with porphyrins, phthalocyanines, or corroles to give long-range ordered architectures, whose structure is determined by the features of both components. The regular morphology and ordered molecular arrangement of these systems enhance the photochemical properties of embedded chromophores, allowing applications as photo-catalysts, antennas for dye-sensitized solar cells, biosensors, and agents for light-triggered therapies. Chemical modifications of peptide and tetrapyrrole structures and control over the assembly process can steer the organization and influence the properties of the resulting system. Here we provide a review of the field, focusing on the assemblies obtained from different classes of self-assembling peptides with tetrapyrroles, their morphologies and their applications as innovative functional materials.

New generation of bioreactors that advance extracellular matrix modelling and tissue engineering

Bioreactors hold a lot of promise for tissue engineering and regenerative medicine applications. They have multiple uses including cell cultivation for therapeutic production and for in vitro organ modelling to provide a more physiologically relevant environment for cultures compared to conventional static conditions. Bioreactors are often used in combination with scaffolds as the nutrient flow can enhance oxygen and diffusion throughout the 3D constructs to prevent the formation of necrotic cores. A variety of scaffolds have been fabricated to achieve a structural architecture that mimic native extracellular matrix. Future developments of in vitro models will incorporate the ability to non-invasively monitor the cellular microenvironment to enhance the understanding of in vitro conditions. This review details current advancements in bioreactor and scaffold systems and provides insight on how in vitro models can be augmented for future biomedical applications.

Enhancing cell and gene therapy manufacture through the application of advanced fluorescent optical sensors (Review)

Cell and gene therapies (CGTs) are examples of future therapeutics that can be used to cure or alleviate the symptoms of disease, by repairing damaged tissue or reprogramming defective genetic information. However, despite the recent advancements in clinical trial outcomes, the path to wide-scale adoption of CGTs remains challenging, such that the emergence of a "blockbuster" therapy has so far proved elusive. Manufacturing solutions for these therapies require the application of scalable and replicable cell manufacturing techniques, which differ markedly from the existing pharmaceutical incumbent. Attempts to adopt this pharmaceutical model for CGT manufacture have largely proved unsuccessful. The most significant challenges facing CGT manufacturing are process analytical testing and quality control. These procedures would greatly benefit from improved sensory technologies that allow direct measurement of critical quality attributes, such as pH, oxygen, lactate and glucose. In turn, this would make manufacturing more robust, replicable and standardized. In this review, the present-day state and prospects of CGT manufacturing are discussed. In particular, the authors highlight the role of fluorescent optical sensors, focusing on their strengths and weaknesses, for CGT manufacture. The review concludes by discussing how the integration of CGT manufacture and fluorescent optical sensors could augment future bioprocessing approaches.

Donor–acceptor type A2B2porphyrins: synthesis, energy transfer, computational and electrochemical studies

Synthesis, photophysical, electrochemical and DFT studies of donor–acceptor type A₂B₂porphyrins and their Zn(ii) and Pd(ii) complexes have been described.

Synthesis and bactericidal properties of porphyrins immobilized in a polyacrylamide support: influence of metal complexation on photoactivity

Development of three porphyrin immobilised polyacrylamide hydrogels active against Gram negative bacteria to be used as antimicrobial materials.

Palladium(ii) complexes of N,N-diphenylacetamide based thio/selenoethers and flower shaped Pd16S7and prismatic Pd17Se15nano-particles tailored as catalysts for C–C and C–O coupling

Pd₁₆S₇/Pd₁₇Se₁₅NPs of shapes unknown hitherto and their Pd precursors (0.0001 mol%) are efficient/reusable catalysts for Suzuki–Miyaura/C–O coupling.

Porphyrinoids for Chemical Sensor Applications

Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

Accessing the Long-Lived Triplet Excited States in Transition-Metal Complexes: Molecular Design Rationales and Applications

Transition-metal complex triplet photosensitizers are versatile compounds that have been widely used in photocatalysis, photovoltaics, photodynamic therapy (PDT) and triplet-triplet annihilation (TTA) upconversion. The principal photophysical processes in these applications are the intermolecular energy transfer or electron transfer. One of the major challenges facing these triplet photosensitizers is the short triplet-state lifetime, which is detrimental to the above-mentioned photophysical processes. In order to address this challenge, transition-metal complexes showing long-lived triplet excited states are highly desired. This review article summarizes the development of this fascinating area, including the molecular design rationales, the principal photophysical properties, and the applications of these complexes in PDT and TTA upconversion.

Controlled intracellular generation of reactive oxygen species in human mesenchymal stem cells using porphyrin conjugated nanoparticles

Nanoparticles capable of generating controlled amounts of intracellular reactive oxygen species (ROS), that advance the study of oxidative stress and cellular communication, were synthesized by functionalizing polyacrylamide nanoparticles with zinc(II) porphyrin photosensitisers. Controlled ROS production was demonstrated in human mesenchymal stem cells (hMSCs) through (1) production of nanoparticles functionalized with varying percentages of Zn(II) porphyrin and (2) modulating the number of doses of excitation light to internalized nanoparticles. hMSCs challenged with nanoparticles functionalized with increasing percentages of Zn(II) porphyrin and high numbers of irradiations of excitation light were found to generate greater amounts of ROS. A novel dye, which is transformed into fluorescent 7-hydroxy-4-trifluoromethyl-coumarin in the presence of hydrogen peroxide, provided an indirect indicator for cumulative ROS production. The mitochondrial membrane potential was monitored to investigate the destructive effect of increased intracellular ROS production. Flow cytometric analysis of nanoparticle treated hMSCs suggested irradiation with excitation light signalled controlled apoptotic cell death, rather than uncontrolled necrotic cell death. Increased intracellular ROS production did not induce phenotypic changes in hMSC subcultures.