Giant surfactant-stabilized N2-foam for enhanced oil recovery after water flooding

A novel giant surfactant, APOSS-PS₅₀, possessing good surface activity, and viscosifying and reinforcing ability as a foam stabilizer, was synthesized successfully to enhance the physical properties of foaming solutions and foam. APOSS-PS₅₀ was widely distributed at the foam gas–liquid interface and adjacent liquid layers through diffusion and adsorption, obviously decreasing the surface tension and improving the foamability and stability of the foam. Furthermore, the aggregation of APOSS-PS₅₀ in the foam films resulted in the formation of a self-assembled nano-sized network through supramolecular interactions (such as hydrogen bonding, π–π stacking, and van der Waals attraction), thus increasing the foam viscoelasticity, including its interfacial viscoelastic modulus and apparent viscosity. Meanwhile, from the sandpack flooding experiments, compared with HPAM/AOS (HPAM: partially hydrolyzed acrylamide and AOS: alpha olefin sulfonate), the differential pressure and final oil recovery after APOSS-PS₅₀/AOS foam flooding increased by 23.5% and 23.2%, up to 2.68 MPa and 81.7%, respectively. In general, APOSS-PS₅₀ significantly promoted the plugging, profile control and oil displacement performance of foam.

A giant surfactant with high surface activity and strong viscosifying ability was prepared through a facile one-pot procedure for foam stabilization in EOR projects.

Single-chain tethered nanoparticles with tunable softness: scalable synthesis and unique self-assembly behavior

A scalable method to prepare single-chain tethered nanoparticles with tunable softness, which results in unique self-assembly behaviors.

Fast functionalization of ultrasound microbubbles using strain promoted click chemistry

Functionalization of microbubbles (MBs) is a difficult issue due to their unstable nature. Here we report a fast and versatile method using a strain promoted alkyne-azide cycloaddition (SPAAC) click reaction for microbubble functionalization. An azadibenzocyclooctyne (DBCO) group was first introduced onto the MB surface and then an azide group into the desired ligand. Without any initiators or catalysts, essential click ligation occurred within 1 min and a majority of the reaction completed in 5 min at 37 °C. This fast ligation shortens the microbubble reaction time and preserves essential amounts of microbubbles for further in situ imaging and delivery of therapeutics.

Photoresponsive amphiphilic block macrocycles bearing azobenzene side chains

The cyclic architecture has an impact on the photoisomerization and packing behavior of micellar aggregates of amphiphilic block copolymers bearing pendant azobenzene and carboxyl groups as compared to their linear counterparts.

Poly(ε-caprolactone) Dendrimer Cross-Linked via Metal-Free Click Chemistry: Injectable Hydrophobic Platform for Tissue Engineering

The fabrication of injectable self-cross-linkable hyperbranched poly(ε-caprolactone) (hyPCL) formulation using metal-free click chemistry was reported. The cross-linking between hyPCL32-(1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (hyPCL32-BCN) and hyPCL32-azide (hyPCL32-N₃) components was proceeded via strain-promoted alkyne-azide cycloaddition (SPAAC) click reaction. Cross-linking was tested to proceed effectively with the exclusion of any toxic cross-linking agents. Strong mechanical properties and excellent biocompatibility were demonstrated for the cross-linked substrates. These newly synthesized dendrimers may have broad applications in tissue engineering such as bone defect repair. In addition, the introduction of metal-free click chemistry to hydrophobic polymers provides an attractive new strategy for developing injectable stiff polymer formulations besides hydrogels for biomedical applications.

Unexpected fluorescence from maleimide-containing polyhedral oligomeric silsesquioxanes: nanoparticle and sequence distribution analyses of polystyrene-based alternating copolymers

Unusual fluorescent polyhedral oligomeric silsesquioxane (POSS)-containing polymers lacking any common fluorescent units because of the crystallinity and clustering of locked CO groups of POSS units.

Branched Polyhedral Oligomeric Silsesquioxane Nanoparticles Prepared via Strain-Promoted 1,3-Dipolar Cycloadditions

Conjugation of small organic molecules and polymers to polyhedral oligosilsesquioxane (POSS) cores results in novel hybrid materials with unique physical characteristics. We report here an approach in which star-shaped organic-inorganic scaffolds bearing eight cyclooctyne moieties can be rapidly functionalized via strain-promoted azide-alkyne cycloaddition (SPAAC) to synthesize a series of nearly monodisperse branched core-shell nanoparticles with hydrophobic POSS cores and hydrophilic arms. We established that SPAAC is a robust method for POSS core octafunctionalization with the reaction rate constant of 1.9 × 10(-2) M(-1) s(-1). Functionalization with poly(ethylene glycol) (PEG) azide, fluorescein azide, and unprotected lactose azide gave conjugates which represent different classes of compounds: polymer conjugates, fluorescent dots, and bioconjugates. These resulting hybrid compounds were preliminarily tested for their ability to self-assemble in solution and at the air-water interface. We observed the formation of robust smooth Langmuir monolayers with diverse morphologies. We found that polar lactose moieties are completely submerged into the subphase whereas the relatively hydrophobic fluorescein arms had extended conformation at the interface, and PEG arms were partially submerged. Finally, we observed the formation of stable micelles with sizes between 70 and 160 nm in aqueous solutions with size and morphology of the structures dependent on the molecular weight and the type of the peripheral hydrophilic moieties.

Photoresponsive Amphiphilic Macrocycles Containing Main-Chain Azobenzene Polymers

Herein, the first example of photosensitive cyclic amphiphilic homopolymers consisting of multiple biphenyl azobenzene chromophores in the cyclic main chain tethered with hydrophilic tetraethylene glycol monomethyl ether units is presented. The synthetic approach involves sequentially performed thermal catalyzed "click" step-growth polymerization in bulk, and Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) intramolecular cyclization from α-alkyne/ω-azide linear precursors. It is observed that such amphiphilic macrocycles exhibit increased glass transition temperatures (Tg ), slightly faster trans-cis-trans photoisomerization, and enhanced fluorescence emission intensity compared with the corresponding linear polymers. In addition, the cyclic amphiphilic homopolymers self-assemble into spherical nanoparticles with smaller sizes which possess slower photoresponsive behaviors in a tetrahydrofuran/water mixture compared with those of the linear ones. All these interesting observations suggest that the cyclic topology has a great influence on the physical properties and self-assembly behavior of these photoresponsive amphiphilic macrocycles in general.

Jahn-Teller distortion in polyoligomeric silsesquioxane (POSS) cations

We investigated the symmetry breaking mechanism in cubic octa-tert-butyl silsesquioxane and octachloro silsesquioxane monocations (Si8O12(C(CH3)3)8(+) and Si8O12Cl8(+)) using density functional theory (DFT) and group theory. Under Oh symmetry, these ions possess (2)T2g and (2)Eg electronic states and undergo different symmetry breaking mechanisms. The ground states of Si8O12(C(CH3)3)8(+) and Si8O12Cl8(+) belong to the C3v and D4h point groups and are characterized by Jahn-Teller stabilization energies of 3959 and 1328 cm(-1), respectively, at the B3LYP/def2-SVP level of theory. The symmetry distortion mechanism in Si8O12Cl8(+) is Jahn-Teller type, whereas in Si8O12(C(CH3)3)8(+) the distortion is a combination of both Jahn-Teller and pseudo-Jahn-Teller effects. The distortion force acting in Si8O12(C(CH3)3)8(+) is mainly localized on one Si-(tert-butyl) group, while in Si8O12Cl8(+) it is distributed over the oxygen atoms. The main distortion forces acting on the Si8O12 core arise from the coupling between the electronic state and the vibrational modes, identified as 9t2g + 1eg + 3a2u for the Si8O12(C(CH3)3)8(+) and 1eg + 2eg for Si8O12Cl8(+).

Modification of PEG-b-PCL block copolymer with high melting temperature by the enhancement of POSS crystal and ordered phase structure

Alkyne-functionalized polyhedral oligomeric silsesquioxane was successfully prepared and further used to modify PEG-b-PCL via click chemistry, resulting in a successful synthesis of POSS grafted PEG-b-PCL.