Chitosan- and hyaluronic acid-based nanoarchitectures in phototherapy: Combination cancer chemotherapy, immunotherapy and gene therapy

Cancer phototherapy has been introduced as a new potential modality for tumor suppression. However, the efficacy of phototherapy has been limited due to a lack of targeted delivery of photosensitizers. Therefore, the application of biocompatible and multifunctional nanoparticles in phototherapy is appreciated. Chitosan (CS) as a cationic polymer and hyaluronic acid (HA) as a CD44-targeting agent are two widely utilized polymers in nanoparticle synthesis and functionalization. The current review focuses on the application of HA and CS nanostructures in cancer phototherapy. These nanocarriers can be used in phototherapy to induce hyperthermia and singlet oxygen generation for tumor ablation. CS and HA can be used for the synthesis of nanostructures, or they can functionalize other kinds of nanostructures used for phototherapy, such as gold nanorods. The HA and CS nanostructures can combine chemotherapy or immunotherapy with phototherapy to augment tumor suppression. Moreover, the CS nanostructures can be functionalized with HA for specific cancer phototherapy. The CS and HA nanostructures promote the cellular uptake of genes and photosensitizers to facilitate gene therapy and phototherapy. Such nanostructures specifically stimulate phototherapy at the tumor site, with particle toxic impacts on normal cells. Moreover, CS and HA nanostructures demonstrate high biocompatibility for further clinical applications.

Hierarchy of Complex Glycomacromolecules: From Controlled Topologies to Biomedical Applications

Carbohydrates bearing a distinct complexity use a special code (Glycocode) to communicate with carbohydrate-binding proteins at a high precision to manipulate biological activities in complex biological environments. The level of complexity in carbohydrate-containing macromolecules controls the amount and specificity of information that can be stored in biomacromolecules. Therefore, a better understanding of the glycocode is crucial to open new areas of biomedical applications by controlling or manipulating the interaction between immune cells and pathogens in terms of trafficking and signaling, which would become a powerful tool to prevent infectious diseases. Even though a certain level of progress has been achieved over the past decade, synthetic glycomacromolecules are still lagging far behind naturally existing glycans in terms of complexity and precision because of insufficient and inefficient synthetic techniques. Currently, specific targeting at a cellular level using synthetic glycomacromolecules is still challenging. It is obvious that multidisciplinary collaborations are essential between different specialized disciplines to enhance the carbohydrate receptor-targeting paradigm for new biomedical applications. In this Perspective, recent developments in the synthesis of sophisticated glycomacromolecules are highlighted, and their biological and biomedical applications are also discussed in detail.

Progress in the Free and Controlled Radical Homo- and Co-Polymerization of Itaconic Acid Derivatives: Toward Functional Polymers with Controlled Molar Mass Distribution and Architecture

Polymeric derivatives of itaconic acid are becoming increasingly more interesting for research and industry because itaconic acid is accessible from renewable resources. In spite of the structural similarity of poly(itaconic acid derivatives) to poly(methacrylates), they are much less reactive, homopolymerize only sluggishly by free radical polymerization (FRP), and are often obtained with low molar masses and conversions. This has so far limited their use. The reasons for the low reactivity of itaconic acid derivatives (including itaconimides, diitaconates, and diitaconamides) are combined steric and electronic effects, as demonstrated by the body of literature on the FRP homopolymerization kinetics of these monomers which is summarized herein. These problems can be solved to a large extent by using controlled radical polymerization (CRP) techniques, notably atom transfer radical polymerization (ATRP) and reversible addition and fragmentation chain transfer radical polymerization (RAFT). By optimizing the reaction conditions for the ATRP and RAFT of itaconic acid derivatives, in particular the reaction temperature, linear relations between molar mass and conversion are obtained in many cases, and homopolymers with high molar masses and reasonably narrow polydispersity indices become accessible. This review presents the state-of-the-art FRP and CRP of itaconic acid derivatives, and highlights functional polymers obtained by these methods.

Palladium-catalyzed polyannulation of pyrazoles and diynes toward multifunctional poly(indazole)s under monomer non-stoichiometric conditions

A novel palladium-catalyzed polymerization route toward polyindazoles with high thermal stability and advanced functionalities in a monomer stoichiometry imbalance-promoted manner.

Ultrasonic-assisted Kabachnik-Fields reaction for rapid fabrication of AIE-active fluorescent organic nanoparticles

Aggregation-induced emission (AIE)-active fluorescent organic nanoparticles (FNPs) have been extensively explored for fluorescence "turn-on" bio-imaging applications with the unique advantages over conventional FNPs. Transformation of AIE-active molecules into FNPs can greatly expand their biomedical application potential. Here we reported a novel "one-pot" strategy for fabricating AIE-active FNPs through an ultrasonic-assisted, catalysts-free and solvent-free Kabachnik-Fields (KF) reaction for the first time. The KF reaction can be completed within 10min to generate AIE-active PTH-CHO-PEI-DEP FNPs through mixing polyethylenimine and aldehyde group containing AIE dyes and diethyl phosphate. These PTH-CHO-PEI-DEP FNPs were confirmed by proton nuclear magnetic resonance (¹H NMR) spectroscopy, transmission electron microscopy (TEM) and fluorescence spectroscopy etc. The cell uptake behavior as well as cell viability of PTH-CHO-PEI-DEP FNPs was examined to evaluate their potential for biomedical application. We demonstrated that the amphiphilic α-aminophosphonate polymers could self-assemble into PTH-CHO-PEI-DEP FNPs in aqueous solution and showed excellent water dispersibility. TEM image shows the size of PTH-CHO-PEI-DEP FNPs is 100-200nm. More importantly, the PTH-CHO-PEI-DEP FNPs emit strong green fluorescence and desirable biocompatibility, making them very suitable for biomedical applications. Finally, thus smart FNPs design together with their excellent performance will open a new avenue in the development of FNPs for following biological processes such as carcinogenesis.

Marrying multicomponent reactions and aggregation-induced emission (AIE): new directions for fluorescent nanoprobes

Recent development and progress for fabrication and applications of aggregation-induced emission polymers through multicomponent reactions have been summarized in this review.

Low-power white light triggered AIE polymer nanoparticles with high ROS quantum yield for mitochondria-targeted and image-guided photodynamic therapy

AIE nanoparticles show mitochondrial targeting, harvest FR/NIR emission and exert severe ROS cytotoxicity under ultralow-power-intensity (10 mW cm⁻²) light irradiation.

Polysiloxane-Modified Tetraphenylethene: Synthesis, AIE Properties, and Sensor for Detecting Explosives

Polysiloxane-modified tetraphenylethene (PTPESi) is successfully synthesized by attaching tetraphenylethene (TPE) units onto methylvinyldiethoxylsiloxane and subsequent polycondensation. Introducing polysiloxane into TPE has minimal effect on the photophysical properties and aggregation-induced emission behavior of TPE. The highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energy levels of PTPESi are located mainly on the tetraphenylethene moieties. The fluorescence intensity and the half width of the emission peak of PTPESi before and after annealing at 120 °C for 12 h are nearly the same, indicating high thermal stability and morphological stability. In addition, use of PTPESi film as a sensor toward the vapor-phase detection of explosives is also studied and it displays quite high fluorescence quenching efficiency and good reversibility.

A Lysosome-Targeting AIEgen for Autophagy Visualization

In this work, a morpholine-functionalized aggregation-induced emission luminogen (AIEgen), AIE-LysoY, is reported for lysosomal imaging and autophagy visualization. To attain outstanding imaging contrast, AIE-LysoY is equipped with excited state intramolecular proton transfer (ESIPT) characteristic. AIE-LysoY provides a new platform for lysosome visualization with good biocompatibility, large Stokes shift, superior signal-to-noise ratio, and high photostability.

Functional isocoumarin-containing polymers synthesized by rhodium-catalyzed oxidative polycoupling of aryl diacid and internal diyne

Functional polymers with in situ generated isocoumarin units were constructed facilely by rhodium-catalyzed polymerization of aryl diacid and internal diyne.

Carbohydrates in Supramolecular Chemistry

Carbohydrates are involved in a variety of biological processes. The ability of sugars to form a large number of hydrogen bonds has made them important components for supramolecular chemistry. We discuss recent advances in the use of carbohydrates in supramolecular chemistry and reveal that carbohydrates are useful building blocks for the stabilization of complex architectures. Systems are presented according to the scaffold that supports the glyco-conjugate: organic macrocycles, dendrimers, nanomaterials, and polymers are considered. Glyco-conjugates can form host-guest complexes, and can self-assemble by using carbohydrate-carbohydrate interactions and other weak interactions such as π-π interactions. Finally, complex supramolecular architectures based on carbohydrate-protein interactions are discussed.

Facile Synthesis of Biocompatible Fluorescent Nanoparticles for Cellular Imaging and Targeted Detection of Cancer Cells

In this work, we report the facile synthesis of functional core-shell structured nanoparticles with fluorescence enhancement, which show specific targeting of cancer cells. Biopolymer poly-l-lysine was used to coat the silver core with various shell thicknesses. Then, the nanoparticles were functionalized with folic acid as a targeting agent for folic acid receptor. The metal-enhanced fluorescence effect was observed when the fluorophore (5-(and-6)-carboxyfluorescein-succinimidyl ester) was conjugated to the modified nanoparticle surface. Cellular imaging assay of the nanoparticles in folic acid receptor-positive cancer cells showed their excellent biocompatibility and selectivity. The as-prepared functional nanoparticles demonstrate the efficiency of the metal-enhanced fluorescence effect and provide an alternative approach for the cellular imaging and targeting of cancer cells.

Polymeric AIE-based nanoprobes for biomedical applications: recent advances and perspectives

The development of polymeric luminescent nanomaterials for biomedical applications has recently attracted a large amount of attention due to the remarkable advantages of these materials compared with small organic dyes and fluorescent inorganic nanomaterials. Among these polymeric luminescent nanomaterials, polymeric luminescent nanomaterials based on dyes with aggregation-induced emission (AIE) properties should be of great research interest due to their unique AIE properties, the designability of polymers and their multifunctional potential. In this review, the recent advances in the design and biomedical applications of polymeric luminescent nanomaterials based on AIE dyes is summarized. Various design strategies for incorporation of these AIE dyes into polymeric systems are included. The potential biomedical applications such as biological imaging, and use in biological sensors and theranostic systems of these polymeric AIE-based nanomaterials have also been highlighted. We trust this review will attract significant interest from scientists from different research fields in chemistry, materials, biology and interdisciplinary areas.

Preparation of emissive glucose-containing polymer nanoparticles and their cell imaging applications

Water dispersible, bright and biocompatible fluorescent glycopolymer nanoparticles were facilely fabricated, and their cellular imaging application was successfully demonstrated.

Fabrication of photostable PEGylated polymer nanoparticles from AIE monomer and trimethylolpropane triacrylate

Fabrication of biocompatible and photostable PEGylated nanoparticles from AIE monomer and trimethylolpropane triacrylate for cellular imaging.

Morphological tuning via structural modulations in AIE luminogens with the minimum number of possible variables and their use in live cell imaging

We present three novel AIE luminogens based on a quinoline–BODIPY platform with strategic tuning of the morphology and optical properties of the nanoaggregates.

Preparation of biocompatible and photostable PEGylated red fluorescent nanoparticles for cellular imaging

Biocompatible and photostable PEGylated red fluorescent nanoparticles were preparedviasurface-initiated ATRP and their cellular imaging application was successfully demonstrated.