Evaluation of citrus pectin capped copper sulfide nanoparticles against Candidiasis causing Candida biofilms

The incidence of candidiasis has significantly increased globally in recent decades, and it is a significant source of morbidity and mortality, particularly in critically ill patients. Candida sp. ability to generate biofilms is one of its primary pathogenic traits. Drug-resistant strains have led to clinical failures of traditional antifungals, necessitating the development of a more modern therapy that can inhibit biofilm formation and enhance Candida sp. sensitivity to the immune system. The present study reports the anticandidal potential of pectin-capped copper sulfide nanoparticles (pCuS NPs) against Candida albicans. The pCuS NPs inhibit C. albicans growth at a minimum inhibitory concentration (MIC) of 31.25 μM and exhibit antifungal action by compromising membrane integrity and overproducing reactive oxygen species. The pCuS NPs, at their biofilm inhibitory concentration (BIC) of 15.63 μM, effectively inhibited C. albicans cells adhering to the glass slides, confirmed by light microscopy and scanning electron microscopy. Phase contrast microscopy pictures revealed that NPs controlled the morphological transitions between the yeast and hyphal forms by limiting conditions that led to filamentation and reducing hyphal extension. In addition, C. albicans showed reduced exopolysaccharide (EPS) production and exhibited less cell surface hydrophobicity (CSH) after pCuS NPs treatment. The findings suggest that pCuS NPs may be able to inhibit the emergence of virulence traits that lead to the formation of biofilms, such as EPS, CSH, and hyphal morphogenesis. The results raise the possibility of developing NPs-based therapies for C. albicans infections associated with biofilms.

Solar-light-driven ternary MgO/TiO2/g-C3N4 heterojunction photocatalyst with surface defects for dinitrobenzene pollutant reduction

Defect engineering and heterojunction are promising strategies to improve the photocatalytic performance of particular catalyst through effective charge carrier separation and transport. Herein, we developed Z-scheme MgO/TiO₂/g-C₃N₄ ternary heterojunction photocatalyst with surface defects and effective charge separation for reduction of recalcitrant dinitrobenzene isomers under simulated solar light irradiation. Mott-Schottky (MS) plot analysis and electron spin resonance (ESR) radical trapping experiment suggested the formation of Z-scheme heterojunction at the interface of TiO₂/g-C₃N₄, which played a crucial role in the electron-hole separation. Incorporating MgO into the structure further enhances charge separation via Ti³⁺ and oxygen vacancy (OV) defects formation at the TiO₂/MgO interface as confirmed by electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) analyses. Besides, the surface basicity of MgO enhanced conversion of dinitrobenzene (DNB) isomers through formation of nitrophenylhydroxylamine intermediate which can easily be reduced to phenylenediamines (PDAs). As confirmed by high performance liquid chromatography (HPLC) analysis, excellent selectivity for PDAs (95-98%) was achieved in 90 min with ternary MgO/TiO₂/g-C₃N₄ composite compared to the binary MgO/TiO₂ and TiO₂/g-C₃N₄. A possible reaction pathway and photocatalytic reduction mechanism were proposed and elucidated. This work demonstrated an effective strategy to reduce recalcitrant dinitrobenzene isomers using efficient, low-cost, and environmental benign photocatalyst with a facile identification of reaction intermediates.

Copper supported silica-based nanocatalysts for CuAAC and cross-coupling reactions

Recent advances in Cu/SiO2-based heterogeneous catalysts for click reaction, C–N, C–S, and C–O coupling reactions are reviewed and summarized.

Green and efficient biosynthesis of pectin-based copper nanoparticles and their antimicrobial activities

Herein, we reported a green biosynthesis method of copper nanoparticles (CuNPs) at microwave irradiation condition by using pectin as a stabilizer and ascorbic acid as a reducing agent. Under the optimum conditions, CuNPs1 and 2 were synthesized under microwave times 0 and 3 min, respectively. Transmission electron microscope and scanning electron microscope (SEM) tests showed that CuNPs1 and 2 had irregular polygon particles with average diameters of 61.9 ± 19.4 and 40.9 ± 13.6 nm, respectively. Zeta potentials of CuNPs1 and 2 were -45.2 and -48.7 mV, respectively. X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy techniques were used to characterize the properties of CuNPs. Furthermore, inhibition zone tests showed that CuNPs2 exhibited higher antimicrobial activities against Escherichia coli, Staphylococcus aureus, and Aspergillus japonicus than CuNPs1. The antibacterial activities were also studied by the bacterial growth kinetics in broth media, and CuNPs2 exhibited lower minimum bactericidal concentrations than CuNPs1.

Reduction of Nitro Compounds Using 3d-Non-Noble Metal Catalysts

The reduction of nitro compounds to the corresponding amines is one of the most utilized catalytic processes in the fine and bulk chemical industry. The latest development of catalysts with cheap metals like Fe, Co, Ni, and Cu has led to their tremendous achievements over the last years prompting their greater application as "standard" catalysts. In this review, we will comprehensively discuss the use of homogeneous and heterogeneous catalysts based on non-noble 3d-metals for the reduction of nitro compounds using various reductants. The different systems will be revised considering both the catalytic performances and synthetic aspects highlighting also their advantages and disadvantages.

Hybrid Copper-Silver Conductive Tracks for Enhanced Oxidation Resistance under Flash Light Sintering

We developed a simple method to prepare hybrid copper-silver conductive tracks under flash light sintering. The developed metal nanoparticle-based ink is convenient because its preparation process is free of any tedious washing steps. The inks were composed of commercially available copper nanoparticles which were mixed with formic acid, silver nitrate, and diethylene glycol. The role of formic acid is to remove the native copper oxide layer on the surface of the copper nanoparticles. In this way, it facilitates the formation of a silver outer shell on the surface of the copper nanoparticles through a galvanic replacement. In the presence of formic acid, the copper nanoparticles formed copper formate, which was present in the unsintered tracks. However, under illumination by a xenon flash light, the copper formate was then converted to copper. Moreover, the resistance of the copper-only films increased by 6 orders of magnitude when oxidized at high temperatures (∼220 °C). However, addition of silver nitrate to the inks suppressed the oxidation of the hybrid copper-silver films, and the resistance changes in these inks at high temperatures were greatly reduced. In addition, the hybrid inks proved to be advantageous for use in electrical circuits as they demonstrated a stable electrical conductivity after exposure to ambient air at 180 °C.

A ternary Cu2O-Cu-CuO nanocomposite: a catalyst with intriguing activity

In this work, the syntheses of Cu2O as well as Cu(0) nanoparticle catalysts are presented. Copper acetate monohydrate produced two distinctly different catalyst particles with varying concentrations of hydrazine hydrate at room temperature without using any surfactant or support. Then both of them were employed separately for 4-nitrophenol reduction in aqueous solution in the presence of sodium borohydride at room temperature. To our surprise, it was noticed that the catalytic activity of Cu2O was much higher than that of the metal Cu(0) nanoparticles. We have confirmed the reason for the exceptionally high catalytic activity of cuprous oxide nanoparticles over other noble metal nanoparticles for 4-nitrophenol reduction. A plausible mechanism has been reported. The unusual activity of Cu2O nanoparticles in the reduction reaction has been observed because of the in situ generated ternary nanocomposite, Cu2O-Cu-CuO, which rapidly relays electrons and acts as a better catalyst. In this ternary composite, highly active in situ generated Cu(0) is proved to be responsible for the hydride transfer reaction. The mechanism of 4-nitrophenol reduction has been established from supporting TEM studies. To further support our proposition, we have prepared a compositionally similar Cu2O-Cu-CuO nanocomposite using Cu2O and sodium borohydride which however displayed lower rate of reduction than that of the in situ produced ternary nanocomposite. The evolution of isolated Cu(0) nanoparticles for 4-nitrophenol reduction from Cu2O under surfactant-free condition has also been taken into consideration. The synthetic procedures of cuprous oxide as well as its catalytic activity in the reduction of 4-nitrophenol are very convenient, fast, cost-effective, and easily operable in aqueous medium and were followed spectrophotometrically. Additionally, the Cu2O-catalyzed 4-nitrophenol reduction methodology was extended further to the reduction of electronically diverse nitroarenes. This concise catalytic process in aqueous medium at room temperature revealed an unprecedented catalytic performance which would draw attention across the whole research community.

N-lauryltyramine capped copper nanoparticles exhibit a selective colorimetric response towards hazardous mercury(ii) ions and display true anti-biofilm and efflux pump inhibitory effects in E. coli

Hg²⁺ ions selectively decolorize CuNPs through aggregation.

An easily accessible and recyclable copper nanoparticle catalyst for the solvent-free synthesis of dipyrromethanes and aromatic amines

A facile method to prepare a reusable copper nanocatalyst is reported.

Investigation of the in situ generation of oxide-free copper nanoparticles using pulsed-laser ablation of bulk copper in aqueous solutions of DNA bases

The pulsed-laser ablation method was used as a facile and green approach to prepare oxide-free copper nanoparticles, and was performed by laser ablation of a copper target in aqueous solutions of the DNA bases.

An efficient d-glucosamine-based copper catalyst for C–X couplings and its application in the synthesis of nilotinib intermediate

d-Glucosamine has been studied for C–N and C–S bond formations via cross-coupling reactions of nitrogen and sulfur nucleophiles with both aryl iodides and bromides.

Sulfidation modulates the toxicity of biogenic copper nanoparticles

First report to show sulfidation reduces CuNP toxicity in vivo. Sulfidation lowered oxidative stress and liver pathology, protected biochemical components, prevented micronucleus formation – strategy for reducing environmental impact of nanoparticles.

Green synthesis of silver and gold nanoparticles employing levan, a biopolymer from Acetobacter xylinum NCIM 2526, as a reducing agent and capping agent

With a vision of finding greener materials to synthesize nanoparticles, we report the production and isolation of levan, a polysaccharide with repeating units of fructose, from Acetobacter xylinum NCIM2526. The isolated levan were characterized using potassium ferricyanide reducing power assay, Fourier transform infra-red (FTIR) spectroscopy and (1)H nuclear magnetic resonance spectroscopy ((1)H NMR). To exploit levan in nanotechnology, we present a simple and greener method to synthesize silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) using biopolymer, levan as both reducing and stabilizing agents. The morphology and stability of the AgNPs and AuNPs were examined by transmission electron microscopy (TEM) and UV-vis absorption (UV-vis) spectroscopy. The possible capping mechanism of the nanoparticles was postulated using FTIR studies. As synthesized biogenic nanoparticles showed excellent catalytic activity as evidenced from sodium borohydride mediated reduction of 4-nitro phenol and methylene blue.

A facile route to synthesize casein capped copper nanoparticles: an effective antibacterial agent and selective colorimetric sensor for mercury and tryptophan

A simple method was developed for the synthesis of copper nanoparticles (CuNPs) with relatively high concentration by using casein as a capping agent.