Ruthenium and palladium bimetallic nanoparticles achieving functional parity with a rhodium cocatalyst for TiO2-photocatalyzed ring hydrogenation of benzoic acid

Our previous study showed that a rhodium (Rh) cocatalyst is indispensable for ring hydrogenation of benzoic acid over a titanium(IV) oxide (TiO2) photocatalyst. In this study, we explored ring hydrogenation under an Rh-free condition by using two kinds of cocatalyst that were inactive for this reaction when used solely. Cyclohexanecarboxylic acid as the ring hydrogenation product was successfully obtained when ruthenium (Ru) and palladium (Pd) were simultaneously loaded on TiO2, indicating that this bimetallic system can be used in place of an Rh cocatalyst in ring hydrogenation. The state and distribution of Ru and Pd in particles loaded on TiO2 were investigated by transmission electron microscopy, X-ray photon spectroscopy, and X-ray absorption near edge structure analysis. The functions of Ru and Pd as cocatalysts are discussed on the basis of results of characterization and activity tests. The effects of different contents of Ru and Pd in Ru-Pd/TiO2 prepared by a two-step photodeposition method on catalytic activity and the features of the reaction system were investigated in detail.

Catalyst-free photo-reductions of aromatic olefins and carbonyl compounds

We describe herein a catalyst-free, traditional reductant-free strategy for the direct photoinduced hydrogenation or deuteration of aromatic olefins, ketones, and aldehydes with simple bases as the only additives. A broad range of substrates were demonstrated with high yields and deuterium incorporations. Mechanistic experiments indicate a radical mechanism.

Light-driven reduction of aromatic olefins in aqueous media catalysed by aminopyridine cobalt complexes

A catalytic system based on earth-abundant elements that efficiently hydrogenates aryl olefins using visible light as the driving-force and H₂O as the sole hydrogen atom source is reported. The catalytic system involves a robust and well-defined aminopyridine cobalt complex and a heteroleptic Cu photoredox catalyst. The system shows the reduction of styrene in aqueous media with a remarkable selectivity (>20 000) versus water reduction (WR). Reactivity and mechanistic studies support the formation of a [Co–H] intermediate, which reacts with the olefin via a hydrogen atom transfer (HAT). Synthetically useful deuterium-labelled compounds can be straightforwardly obtained by replacing H₂O with D₂O. Moreover, the dual photocatalytic system and the photocatalytic conditions can be rationally designed to tune the selectivity for aryl olefin vs. aryl ketone reduction; not only by changing the structural and electronic properties of the cobalt catalysts, but also by modifying the reduction properties of the photoredox catalyst.

A dual catalytic system based on earth-abundant elements reduces aryl olefins to alkanes in aqueous media under visible light. Mechanistic studies allow for rational tunning of the system for the selective reduction of aryl olefins vs ketones and vice versa.

Nano Ag/AgCl wires-photocatalyzed hydrogen production and transfer hydrogenation of Knoevenagel-type products

An investigation of the relationship between the morphology of Ag/AgCl nanostructured composites with their catalytic performance has been reported.

TiO₂ Photocatalysis for Transfer Hydrogenation

Catalytic transfer hydrogenation reactions, based on hydrogen sources other than gaseous H₂, are important processes that are preferential in both laboratories and factories. However, harsh conditions, such as high temperature, are usually required for most transition-metal catalytic and organocatalytic systems. Moreover, non-volatile hydrogen donors such as dihydropyridinedicarboxylate and formic acid are often required in these processes which increase the difficulty in separating products and lowered the whole atom economy. Recently, TiO₂ photocatalysis provides mild and facile access for transfer hydrogenation of C=C, C=O, N=O and C-X bonds by using volatile alcohols and amines as hydrogen sources. Upon light excitation, TiO₂ photo-induced holes have the ability to oxidatively take two hydrogen atoms off alcohols and amines under room temperature. Simultaneously, photo-induced conduction band electrons would combine with these two hydrogen atoms and smoothly hydrogenate multiple bonds and/or C-X bonds. It is heartening that practices and principles in the transfer hydrogenations of substrates containing C=C, C=O, N=O and C-X bond based on TiO₂ photocatalysis have overcome a lot of the traditional thermocatalysis' limitations and flaws which usually originate from high temperature operations. In this review, we will introduce the recent paragon examples of TiO₂ photocatalytic transfer hydrogenations used in (1) C=C and C≡C (2) C=O and C=N (3) N=O substrates and in-depth discuss basic principle, status, challenges and future directions of transfer hydrogenation mediated by TiO₂ photocatalysis.

Hydrogen- and noble metal-free conversion of nitro aromatics to amino aromatics having reducible groups over an organically modified TiO2 photocatalyst under visible light irradiation

A TiO₂ modified with 2,3-dihydroxynaphthalene responds to visible light, and electrons are photogenerated to the CB of TiO₂ under light irradiation in the presence of a suitable hole scavenger.

Transfer Hydrogenation of Alkenes Using Ethanol Catalyzed by a NCP Pincer Iridium Complex: Scope and Mechanism

The first general catalytic approach to effecting transfer hydrogenation (TH) of unactivated alkenes using ethanol as the hydrogen source is described. A new NCP-type pincer iridium complex (^BQ-NC^OP)IrHCl containing a rigid benzoquinoline backbone has been developed for efficient, mild TH of unactivated C-C multiple bonds with ethanol, forming ethyl acetate as the sole byproduct. A wide variety of alkenes, including multisubstituted alkyl alkenes, aryl alkenes, and heteroatom-substituted alkenes, as well as O- or N-containing heteroarenes and internal alkynes, are suitable substrates. Importantly, the (^BQ-NC^OP)Ir/EtOH system exhibits high chemoselectivity for alkene hydrogenation in the presence of reactive functional groups, such as ketones and carboxylic acids. Furthermore, the reaction with C₂D₅OD provides a convenient route to deuterium-labeled compounds. Detailed kinetic and mechanistic studies have revealed that monosubstituted alkenes (e.g., 1-octene, styrene) and multisubstituted alkenes (e.g., cyclooctene (COE)) exhibit fundamental mechanistic difference. The OH group of ethanol displays a normal kinetic isotope effect (KIE) in the reaction of styrene, but a substantial inverse KIE in the case of COE. The catalysis of styrene or 1-octene with relatively strong binding affinity to the Ir(I) center has (^BQ-NC^OP)Ir^I(alkene) adduct as an off-cycle catalyst resting state, and the rate law shows a positive order in EtOH, inverse first-order in styrene, and first-order in the catalyst. In contrast, the catalysis of COE has an off-cycle catalyst resting state of (^BQ-NC^OP)Ir^III(H)[O(Et)···HO(Et)···HOEt] that features a six-membered iridacycle consisting of two hydrogen-bonds between one EtO ligand and two EtOH molecules, one of which is coordinated to the Ir(III) center. The rate law shows a negative order in EtOH, zeroth-order in COE, and first-order in the catalyst. The observed inverse KIE corresponds to an inverse equilibrium isotope effect for the pre-equilibrium formation of (^BQ-NC^OP)Ir^III(H)(OEt) from the catalyst resting state via ethanol dissociation. Regardless of the substrate, ethanol dehydrogenation is the slow segment of the catalytic cycle, while alkene hydrogenation occurs readily following the rate-determining step, that is, β-hydride elimination of (^BQ-NC^OP)Ir(H)(OEt) to form (^BQ-NC^OP)Ir(H)₂ and acetaldehyde. The latter is effectively converted to innocent ethyl acetate under the catalytic conditions, thus avoiding the catalyst poisoning via iridium-mediated decarbonylation of acetaldehyde.

Photocatalytic chemoselective cleavage of C–O bonds under hydrogen gas- and acid-free conditions

In the presence of a palladium-loaded TiO₂ photocatalyst, the cleavage of benzyl phenyl ether derivatives afforded toluenes and phenols simultaneously.

Sodium borohydride-nickel chloride hexahydrate in EtOH/PEG-400 as an efficient and recyclable catalytic system for the reduction of alkenes

An efficient, safe and one-pot convenient catalytic system has been developed for the reduction of alkenes using NaBH₄–NiCl₂·6H₂O in EtOH/PEG-400 under mild conditions. In this catalytic system, a variety of alkenes (including trisubstituted alkene α-pinene) were well reduced and the Ni catalyst could be recycled.

An efficient, safe and one-pot convenient catalytic system has been developed for the reduction of alkenes using NaBH₄–NiCl₂·6H₂O in EtOH/PEG-400 under mild conditions.

Ring hydrogenation of aromatic compounds in aqueous suspensions of an Rh-loaded TiO2 photocatalyst without use of H2 gas

Aromatics with a carboxyl group were almost quantitatively hydrogenated to corresponding cyclohexanes over an Rh–TiO₂ photocatalyst under H₂-free conditions.

Photocatalytic hydrogenation of furan to tetrahydrofuran in alcoholic suspensions of metal-loaded titanium(iv) oxide without addition of hydrogen gas

Furan was almost quantitatively hydrogenated to tetrahydrofuran in methanolic suspension of a Pd-TiO₂ photocatalyst with an apparent quantum efficiency of 37%.

Organically modified titania having a metal catalyst: a new type of liquid-phase hydrogen-transfer photocatalyst working under visible light irradiation and H2-free conditions

Organically modified titania having a metal catalyst (OMTC), 2,3-dihydroxynaphthalene-modified titania having palladium metal, successfully worked as a hydrogen-transfer (C[double bond, length as m-dash]C hydrogenation) photocatalyst in the presence of triethanolamine as the hydrogen source under visible light irradiation and hydrogen-free conditions.

Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis

Heterogeneous semiconductor photoredox catalysis (SCPC), particularly with TiO2, is evolving to provide radically new synthetic applications. In this review we describe how photoactivated SCPCs can either (i) interact with a precursor that donates an electron to the semiconductor thus generating a radical cation; or (ii) interact with an acceptor precursor that picks up an electron with production of a radical anion. The radical cations of appropriate donors convert to neutral radicals usually by loss of a proton. The most efficient donors for synthetic purposes contain adjacent functional groups such that the neutral radicals are resonance stabilized. Thus, ET from allylic alkenes and enol ethers generated allyl type radicals that reacted with 1,2-diazine or imine co-reactants to yield functionalized hydrazones or benzylanilines. SCPC with tertiary amines enabled electron-deficient alkenes to be alkylated and furoquinolinones to be accessed. Primary amines on their own led to self-reactions involving C-N coupling and, with terminal diamines, cyclic amines were produced. Carboxylic acids were particularly fruitful affording C-centered radicals that alkylated alkenes and took part in tandem addition cyclizations producing chromenopyrroles; decarboxylative homo-dimerizations were also observed. Acceptors initially yielding radical anions included nitroaromatics and aromatic iodides. The latter led to hydrodehalogenations and cyclizations with suitable precursors. Reductive SCPC also enabled electron-deficient alkenes and aromatic aldehydes to be hydrogenated without the need for hydrogen gas.