Semi-empirical infrared spectra simulation of pyrene-like molecules insight for simple analysis of functionalization graphene quantum dots

The Infrared (IR) spectra usually assume the samples are 3D materials. Thus, it is difficult to identify functional groups in 2D materials at the edge and the center of the 2D surface. Therefore, it is crucial to introduce analysis methods that enable the investigation of 2D carbon materials such as graphene and its derivatives using IR spectra. This study calculates the infrared spectra of pyrene-like molecules as an insight for a simple analysis of graphene quantum dots using a semi-empirical method. These IR spectra were correlated to the electronic transition and charge distribution associated with functional groups. The IR spectra analysis focuses on comparing the pristine and functionalized molecule at the wavenumber 1400-2000 cm^-1_, especially to identify the C=C stretching mode and 3000-3500 cm^-1 for C-H and OH stretching. Moreover, the determination of excitation spectra was carried out to analyze the electronic transition of the molecules in the ultraviolet-visible region (200-900 nm) calculated using ZINDO method. The investigation of the pyrene-like GQD permitted the identification of the edge and center surface functionalization in 2D carbon materials.

Electrochemical Synthesis of Carbon Quantum Dots

Carbon quantum dots (CDs) are "small" carbon nanostructures with excellent photoluminescence properties, together with low-toxicity, high biocompatibility, excellent dispersibility in water as well as organic solvents. Due to their characteristics, CDs have been studied for a plethora of applications as biosensors, luminescent probes for photodynamic and photothermal therapy, fluorescent inks and many more. Moreover, the possibility to obtain carbon dots from biomasses and/or organic waste has strongly promoted the interest in this class of carbon-based nanoparticles, having a promising impact in the view of circular economy and sustainable processes. Within this context, electrochemistry proved to be a green, practical, and efficient method for the synthesis of high-quality CDs, with the possibility to fine-tune their characteristics by changing operational parameters. This review outlines the principal and most recent advances in the electrochemical synthesis of CDs, focusing on the electrochemical set-up optimization.

Chitosan-graphene quantum dot based active film as smart wound dressing

Graphene quantum dots (GQDs), are biocompatible materials, with mechanical strength and stability. Chitosan, has antibacterial and anti-inflammatory properties, and biocompatibility. Wound healing is a challenging process especially in chronic diseases and infection. In this study, films consisting of chitosan and graphene quantum dots were developed for application in infected wounds. The chitosan-graphene films were prepared in the acidic solution followed by slow solvent evaporation and drying. The chitosan-graphene films were characterized by the scanning electron microscopy, x-ray diffraction, atomic force microscopy, Raman spectroscopy and thermogravimetric analysis. The films' was evaluated by the wound healing assays, hemolytic potential, and nitrite production, cytokine production and swelling potential. The obtained films were flexible and well-structured, promoting cell migration, greater antibacterial activity, lower hemolytic activity, and maintaining wound moisture. Our data suggested that the use of graphene quantum dot-containing chitosan films would be an efficient and promising way in combating wounds.

Synthesis of Highly Near-Infrared Fluorescent Graphene Quantum Dots Using Biomass-Derived Materials for In Vitro Cell Imaging and Metal Ion Detection

Graphene quantum dots (GQDs) are a subset of fluorescent nanomaterials that have gained recent interest due to their photoluminescence properties and low toxicity and biocompatibility features for bioanalysis and bioimaging. However, it is still a challenge to prepare highly near-infrared (NIR) fluorescent GQDs using a facile pathway. In this study, NIR GQDs were synthesized from the biomass-derived organic molecule cis-cyclobutane-1,2-dicarboxylic acid via one-step pyrolysis. The resulting GQDs were then characterized by various analytical methods such as UV-Vis absorption spectroscopy, fluorescence spectroscopy, dynamic light scattering, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Moreover, the photostability and stability over a wide pH range were also investigated, which indicated the excellent stability of the prepared GQDs. Most importantly, two peaks were found in the fluorescence emission spectra of the GQDs, one of which was located in the NIR region of about 860 nm. Finally, the GQDs were applied for cell imaging with human breast cancer cell line, MCF-7, and cytotoxicity analysis with mouse macrophage cell line, RAW 246.7. The results showed that the GQDs entered the cells through endocytosis on the fluorescence images and were not toxic to the cells up to a concentration of 200 μg/mL. Thus, the developed GQDs could be a potential effective fluorescent bioimaging agent. Finally, the GQDs depicted fluorescence quenching when treated with mercury metal ions, indicating that the GQDs could be used for mercury detection in biological samples as well.

Fabrication of High Yield Photoluminescent Quantized Graphene Nanodiscs for Supercapacitor Devices

In this work, we produced high yield quantized nitrogen-doped graphene nanodiscs from waste tires via a one-step process under high pressure and temperature using a homemade stainless steel reactor without using any chemical additives. Reaction temperature played a vital role in the preparation process. By increasing the temperature to a level between 600 and 1100 °C, the carbon atoms rearranged themselves to build a mixed graphene structure of nanodiscs and quantum dots. The obtained graphene exhibits excellent capacitance and long life cycle stability as an electrode in supercapacitor devices. The specific capacitance rose to 161.24 F/g with a high power density of 733.3 W/kg, and the energy density reached 27.1 Wh/kg. The finding of this work is not only to provide a solution to get rid of hazardous materials but also to give awareness of turning these hazardous materials into a cost-effective and economical nanomaterial; in another, this approach sheds light on the promising power uses of waste.

The electrochemical detection of prostate specific antigen on glassy carbon electrode modified with combinations of graphene quantum dots, cobalt phthalocyanine and an aptamer

Herein, a novel aptasensor is developed for the electrochemical detection of prostate specific antigen (PSA) on electrode surfaces modified using various combinations of a Cobalt phthalocyanine (CoPc), an aptamer and graphene quantum dots (GQDs). Electrochemical impedance spectroscopy (EIS) as well as differential pulse voltammetry (DPV) are employed for the detection of PSA. In both analytical techniques, linear calibration curves were observed at a concentration range of 1.2-2.0 pM. The glassy carbon electrode where CoPc and GQDs are placed on the electrode when non-covalently linked followed by addition of the aptamer (GQDs-CoPc(ππ)-aptamer (sequential)) showed the best performance with a limit of detection (LoD) as low as 0.66 pM when using DPV. The detection limits were much lower than the dangerous levels reported for PSA in males tested for prostate cancer. This electrode showed selectivity for PSA in the presence of bovine serum albumin, glucose and L-cysteine. The aptasensor showed good stability, reproducibility and repeatability, deeming it a promising early detection device for prostate cancer.

Organic dots (O-dots) for theranostic applications: preparation and surface engineering

Organic dots is a term used to represent materials including graphene quantum dots and carbon quantum dots because they rely on the presence of other atoms (O, H, and N) for their photoluminescence or fluorescence properties. They generally have a small size (as low as 2.5 nm), and show good photostability under prolonged irradiation. The excitation and emission wavelengths of O-dots can be tailored according to their synthetic procedure, where although their quantum yield is quite low compared with organic dyes, this is partly compensated by their large absorption coefficients. A wide range of strategies have been used to modify the surface of O-dots for passivation, improving their solubility and biocompatibility, and allowing the attachment of targeting moieties and therapeutic cargos. Hybrid nanostructures based on O-dots have been used for theranostic applications, particularly for cancer imaging and therapy. This review covers the synthesis, physics, chemistry, and characterization of O-dots. Their applications cover the prevention of protein fibril formation, and both controlled and targeted drug and gene delivery. Multifunctional therapeutic and imaging platforms have been reported, which combine four or more separate modalities, frequently including photothermal or photodynamic therapy and imaging and drug release.

From graphene to graphene ribbons: atomically precise cutting via hydrogenation pseudo-crack

The properties and applications of graphene nanoribbons (GNRs) depend heavily on their shape and size, making precise design and construction at atomic scale significantly important. Herein, we show that pseudo-cracking is a feasible method for creating atomically precise GNRs. By using molecular dynamics (MD) simulation, we find that hydrogenation can act as a pseudo-crack to trigger the fracture of graphene along the hydrogenation line and cut the graphene into a GNR. Precise GNRs with a desired width, edge type and associated properties can be realized in a controllable way by manipulating the position and dimension of the hydrogenation pseudo-crack. We also find that it is better to use hydrogenation pseudo-cracks along the armchair direction to cut graphene at lower forces into GNRs with smooth edges. Our findings suggest a promising approach to cut graphene and other two-dimensional materials into nanoribbons effectively and accurately.

An amplified electrochemical sensor employing a polymeric film and graphene quantum dots/multiwall carbon nanotubes in a deep eutectic solvent for sensitive analysis of paracetamol and 4-aminophenol

Herein, a nanocomposite consisting of graphene quantum dots, a deep eutectic solvent and carboxyl functionalized multiwall carbon nanotubes (GQDs + DES + MWCNTs-COOH) was prepared.

Additive-Free Electrophoretic Deposition of Graphene Quantum Dots Thin Films

The electrophoretic deposition (EPD) of graphene-based materials on transparent substrates is highly potential for many applications. Several factors can determine the yield of the EPD process, such as applied voltage, deposition time and particularly the presence of dispersion additives (stabilisers) in the suspension solution. This study presents an additive-free EPD of graphene quantum dot (GQD) thin films on an indium tin oxide (ITO) glass substrate and studies the deposition mechanism with the variation of the applied voltage (10-50 V) and deposition time (5-25 min). It is found that due to the small size (≈3.9 nm) and high content of deprotonated carboxylic groups, the GQDs form a stable dispersion (zeta-potential of about -35 mV) without using additives. The GQD thin films can be deposited onto ITO with optimal surface morphology at 30 V in 5 min (surface roughness of approximately (3.1±1.3) nm). In addition, as-fabricated GQD thin films also possess some interesting physico-optical properties, such as a double-peak photoluminescence at about λ=417 and 439 nm, with approximately 98 % visible transmittance. This low-cost and eco-friendly GQD thin film is a promising material for various applications, for example, transparent conductors, supercapacitors and heat conductive films in smart windows.

Synthesis of three-dimensional Au-graphene quantum dots@Pt core-shell dendritic nanoparticles for enhanced methanol electro-oxidation

Au-graphene quantum dots (GQDs)@Pt core-shell nanodendrites are synthesized through a two-step reduction approach, in which Au forms the core, GQDs form an intermediate layer and dendritic Pt forms the shell. Among the above synthesized catalysts, the GQDs can manipulate the binding of reaction intermediates on the Pt surface as well as assemble π-π ^* conjugate bonds, thus forming a dendritic Pt shell instead of a compact Pt shell. The obtained core-shell structure was characterized by transmission electron microscopy, energy-dispersive x-ray and x-ray photoelectron spectroscopy. The methanol electro-oxidation was investigated in alkaline media on the Au-GQDs@Pt modified electrode via cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy analysis. In particular, we discovered that Au-Pt assembled with GQDs could dramatically improve the activity and stability of the catalysts, owing to the synergistic effect raised by the GQDs, which exhibit prominent electron conductivity and great chemical/physical stability. It was also found that the Pt/Au mole ratios could control the Pt shell thickness, which significantly affected the catalytic methanol oxidation activity of the Au-GQDs@Pt nanodendrites. The Au-GQDs@Pt nanodendrites with optimum Pt/Au mole ratios of 1.0 exhibited a 2.5 times increase in electrocatalytic activity toward methanol oxidation compared with the commercial catalyst (Pt/C), and its CO tolerance was also greatly improved. The above results show that the Au-GQDs@Pt nanocatalysts have potential application prospects in direct methanol fuel cells.

Evolution and Synthesis of Carbon Dots: From Carbon Dots to Carbonized Polymer Dots

Despite the various synthesis methods to obtain carbon dots (CDs), the bottom-up methods are still the most widely administrated route to afford large-scale and low-cost synthesis. However, as CDs are developed with increasing reports involved in producing many CDs, the structure and property features have changed enormously compared with the first generation of CDs, raising classification concerns. To this end, a new classification of CDs, named carbonized polymer dots (CPDs), is summarized according to the analysis of structure and property features. Here, CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties. Furthermore, deep insights into the effects of synthesis on the structure/property features of CDs are provided. Herein, the synthesis methods of CDs are also summarized in detail, and the effects of synthesis conditions of the bottom-up methods in terms of the structures and properties of CPDs are discussed and analyzed comprehensively. Insights into formation process and nucleation mechanism of CPDs are also offered. Finally, a perspective of the future development of CDs is proposed with critical insights into facilitating their potential in various application fields.

Antioxidant Activity of Graphene Quantum Dots Prepared in Different Electrolyte Environments

Antioxidants can reduce or inhibit damage such as oxidative decay caused by elevated levels of free radicals. Therefore, pursuing antioxidants with excellent properties has attracted more and more attention. Graphene quantum dots (GQDs) are considered a promising material because of their good free radical scavenging activity, low toxicity, and excellent water solubility. However, their scavenging efficiency, antioxidant mechanism, and effective control methods need to be improved. Herein, in order to further reveal the antioxidant mechanism of GQDs, the role of electrolytes in improving the antioxidant activity of GQDs is explored. In addition, 1,1-diphenyl-2-picrazine (DPPH∙), hydroxyl (∙OH), and superoxide (∙O₂⁻) free radicals are used to evaluate the antioxidant activity of the as-prepared GQDs. Combined with transmission electron microscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, and cyclic volt–ampere characteristic curves, the effects of an electrolytic environment on the surface functional groups, charge transfer capability, and defect states of GQDs are obtained. The antioxidant mechanism of GQDs and how to improve their antioxidant activity are further elucidated.

Sonochemically N-functionalized graphene oxide towards optically active photoluminescent bioscaffold

Herein, Nitrogen functionalized graphene oxide (N-f-GrO) has been synthesized using the sonochemical method. 2-Aminopyrimidine (APD) was used as a precursor for covalent functionalization with graphene oxide [f-(APD)GrO] as N-f-GrO which was ascertained with XPS. The involvement of arylamine group and formation of covalent bond over GrO surface was confirmed with high resolution C1s spectrum of f-(APD)GrO. Also, the signature of N1s peak in the survey spectrum of f-(APD)GrO has endorsed the surface modification of GrO through covalent functionalization. A bathochromic shift was observed for f-(APD)GrO in UV and enhanced weight loss of 91.39% at 191.80 °C, confirms a facile functionalization of GrO via formation of amide bond, where the terminal -OH portal of carboxylic group is substituted by 2-Aminopyrimidine. Moreover, the formation of f-(APD)GrO was investigated with various analytical techniques like Raman, XRD and FTIR. The surface morphology and topography have been understood by using HRTEM/SAED, AFM, and SEM analysis. The synthesized f-(APD)GrO shows potential optically active photoluminescence properties and higher potency towards biological insight. The identified photoluminescence (PL) peaks at 3.78, 3.21 2.01 and 1.64 eV indicate photon emission including an orange optical transition at 2.01 eV. The multiple peaks in a PL spectrum are due to radiative and non-radiative recombinations which are also associated with excess hole (h⁺)-electron (e^-) trapping on the surface to restrict the recombinations of e^- and h⁺. The biological activity of N-f-GrO has been explored with Sulforhodamine B (SRB) assay on HaCaT and Vero cell lines. The concentration-dependent cell viabilities have been observed a maximum at 20 µg/ml for HaCaT and at 10 µg/ml for Vero cell lines at testing concentration range of 10-80 μg mL^-1. The significant morphological impact on cell lines confirms the cytocompatibility behaviour. Therefore, the synergistic impact of various properties of f-(APD)GrO can be further explored to study its significance as nanocarrier for photosensitive biomedical response.

Highly porous self-assembly of nitrogen-doped graphene quantum dots over reduced graphene sheets for photo-electrocatalytic electrode

Nitrogen-doped graphene quantum dots (NGQDs) are a diverse organic catalyst, competitive with other metallic catalysts due to their low cost, high stability, biocompatibility, and eco-friendliness. Highly functional multi-edge surfaces of NGQDs play a key role in imparting superb photocatalytic and electrocatalytic activity. However, when coating NGQDs by conventional techniques, such surfaces are not exposed for catalysis, due to the unwanted overlap of NGQDs sheets. To avoid this issue, here we propose a facile technique to orient NGQDs in a three-dimensional (3D) self-assembled foam-like structure, over reduced graphene oxide coated woven carbon fabric. This 3D assembled structure provides highly exposed active surfaces, which are readily available for catalytic reactions: however, in the conventional uniformly coated NGQDs layer, catalytic activity was limited by complex diffusion. The superb catalytic activity of the assembled NGQDs was utilized for the degradation of organic pollutant (methylene blue dye) from water. Additionally, the proposed electrode revealed much higher electrocatalytic activity than the rare Pt catalyst, owing to the easy diffusion of electrolyte and fast quenching of charges through the porous structure. The assembled NGQDs showed 50% higher photocatalytic degradation compared to uniformly coated NGQDs, which was further accelerated (50%) by application of the biased potential of 2 V; i.e. photo-electrocatalysis. The novel photo-electrocatalytic electrode offers high conductivity, stability, and flexibility, which make this complete carbon electrode highly attractive for other catalytic applications such as fuel cells, supercapacitors, and water splitting.

Carbon-based quantum particles: an electroanalytical and biomedical perspective

Carbon-based quantum particles, especially spherical carbon quantum dots (CQDs) and nanosheets like graphene quantum dots (GQDs), are an emerging class of quantum dots with unique properties owing to their quantum confinement effect.

Tuning the wettability and photoluminescence of graphene quantum dots via covalent modification

In this paper, we have tuned the dual properties, i.e., wettability and photoluminescence of GQDs by simply covalent modification with long chain alkyl (–C₁₂H₂₇) groups.

Strongly tricolor-emitting carbon dots synthesized by a combined aging–annealing route and their bio-application

A novel way has been established to make the FCDs with a very high QY, high stability, low cell cytotoxicity, and outstanding performance as a fluorescence probe.

Advances, challenges and promises of carbon dots

Carbon-dots with unique physical and chemical properties have versatile applications in environmental and energy fields.

Electrochemical and Capacitive Properties of Carbon Dots/Reduced Graphene Oxide Supercapacitors

There is much recent interest in graphene-based composite electrode materials because of their excellent mechanical strengths, high electron mobilities, and large specific surface areas. These materials are good candidates for applications in supercapacitors. In this work, a new graphene-based electrode material for supercapacitors was fabricated by anchoring carbon dots (CDs) on reduced graphene oxide (rGO). The capacitive properties of electrodes in aqueous electrolytes were systematically studied by galvanostatic charge-discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy. The capacitance of rGO was improved when an appropriate amount of CDs were added to the material. The CD/rGO electrode exhibited a good reversibility, excellent rate capability, fast charge transfer, and high specific capacitance in 1 M H₂SO₄. Its capacitance was as high as 211.9 F/g at a current density of 0.5 A/g. This capacitance was 74.3% higher than that of a pristine rGO electrode (121.6 F/g), and the capacitance of the CD/rGO electrode retained 92.8% of its original value after 1000 cycles at a CDs-to-rGO ratio of 5:1.

Nitrogen-doped carbon dots originating from unripe peach for fluorescent bioimaging and electrocatalytic oxygen reduction reaction

This paper reports the robust hydrothermal synthesis of nitrogen doped carbon dots (N-CDs) using the unripe fruit of Prunus persica (peach) as the carbon precursor and aqueous ammonia as the nitrogen source. The optical properties of synthesized N-CDs were characterized by ultraviolet visible (UV-Vis) and fluorescence spectroscopy techniques. The synthesized N-CDs were emitted blue light when excitated with a portable UV lamp. The materials with the optical properties were characterized further by high resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). The mean size of the N-CDs was approximately 8nm, as calculated from the HRTEM image. The d-spacing of N-CDs, calculated using Bragg law, was approximately 0.21nm, which was consistent with the interlayer distance calculated from the HRTEM image. FT-IR spectroscopy and XPS revealed the presence of the phytoconstituents functionalities of peach fruit over the N-CDs surface and a high level of nitrogen doping on carbon dots (CDs) was confirmed by XPS studies. These results suggest that the unripe fruit extract of peach is an ideal candidate for the preparation of N-CDs. The resulting N-CDs showed excellent optical properties in water. The synthesized N-CDs exhibited a high fluorescence quantum yield and low cytotoxicity, and can be used as fluorescence imaging probes. In addition, the N-CDs were catalytically activite towards the oxygen reduction reaction (ORR). The N-CDs exhibited good catalytic activity in an alkaline medium (0.1M KOH) with a remarkable ORR of approximately 0.72V vs reversible hydrogen electrode (RHE), and O2 reduction follows mainly a 2 electron pathway by being reduced to hydrogen peroxide. The 2-electron reduction pathway is used in industry for H2O2 production.

Large-scale synthesis of N-doped carbon quantum dots and their phosphorescence properties in a polyurethane matrix

An easy, large-scale synthesis of N-doped carbon quantum dots (CQDs) was developed by using isophorone diisocyanate (IPDI) as a single carbon source under microwave irradiation. The yield of raw N-doped CQDs was about 83%, which is suitable for industrial-scale production. A detailed formation mechanism for N-doped CQDs involving self-polymerization and condensation of IPDI was demonstrated. Moreover, the obtained N-doped CQDs can be homogeneously dispersed in various organic monomers and do not need toxic organic solvents as dispersing agents. This advantage expands the range of applications of CQDs in composites. The N-doped CQDs dispersed in polyurethane (PU) matrixes emit not only fluorescence but also phosphorescence and delayed fluorescence at room temperature upon excitation with ultraviolet (UV) light. Furthermore, the phosphorescence of CQD/PU composites is sensitive to oxygen and therefore, the obtained-CQDs could be exploited in the development of novel oxygen sensors.

Carbon quantum dots and their applications

This review covers the progress in the research and development of carbon quantum dots and their applications in chemical sensing, biosensing, bioimaging, nanomedicine, photocatalysis and electrocatalysis.

One-pot synthesis of photoluminescent carbon nanodots by carbonization of cyclodextrin and their application in Ag+ detection

A simple one-pot approach was developed for synthesis of photoluminescent carbon nanodotsfromcyclodextrins.