Thermoresponsive On-Demand Adhesion and Detachment of a Polyurethane-Urea Bioadhesive

The development of bioadhesives with strong adhesion and on-demand adhesion-detachment behavior is still critically important and challenging for facilitating painless and damage-free removal in clinical applications. In this work, for the first time, we report the easy fabrication of novel polyurethane-urea (PUU)-based bioadhesives with thermoresponsive on-demand adhesion and detachment behavior. The PUU copolymer was synthesized by a simple copolymerization of low-molecular-weight, hydrophilic, and biocompatible poly(ethylene glycol), glyceryl monolaurate (GML, a special chain extender with a long side hydrophobic alkyl group), and isophorone diisocyanate (IPDI). Here, GML was expected to not only adjust the temperature-dependent adhesion behavior but also act as an internal plasticizer. By simple adjustment of the water content, the adhesion strength of the 15 wt % water-containing PUU film toward porcine skin is as high as 55 kPa with an adhesion energy of 128 J/m2 at 37 °C. The adhesion strength dramatically decreases to only 3 kPa at 10 °C, exhibiting switching efficiency as high as 0.95. Furthermore, the present PUU-based adhesive also shows good on-demand underwater adhesion and detachment with a cell viability close to 100%. We propose that biomaterial research fields, especially novel PUU/polyurethane (PU)-based functional materials and bioadhesives, could benefit from such a novel thermoresponsive copolymer with outstanding mechanical and functional performances and an easy synthesis and scaled-up process as described in this article.

Innovations in applications and prospects of non-isocyanate polyurethane bioplastics

Currently, conventional plastics are necessary for a variety of aspects of modern daily life, including applications in the fields of healthcare, technology, and construction. However, they could also contain potentially hazardous compounds like isocyanates, whose degradation has a negative impact on both the environment and human health. Therefore, researchers are exploring alternatives to plastic which is sustainable and environmentally friendly without compromising its mechanical and physical features. This review study highlights the production of highly eco-friendly bioplastic as an efficient alternative to non-biodegradable conventional plastic. Bioplastics are produced from various renewable biomass sources such as plant debris, fatty acids, and oils. Poly-addition of di-isocyanates and polyols is a technique employed over decades to produce polyurethanes (PUs) bioplastics from renewable biomass feedstock. The toxicity of isocyanates is a major concern with the above-mentioned approach. Novel green synthetic approaches for polyurethanes without using isocyanates have been attracting greater interest in recent years to overcome the toxicity of isocyanate-containing raw materials. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines appears to be the most promising method to obtain non-isocyanate polyurethanes (NIPUs). This method results in the creation of polymeric materials with distinctive and adaptable features with the elimination of harmful compounds. Consequently, non-isocyanate polyurethanes represent a new class of green polymeric materials. In this review study, we have discussed the possibility of creating novel NIPUs from renewable feedstocks in the context of the growing demand for efficient and ecologically friendly plastic products.

Thermo-responsive, Mechanically-robust and 3D Printable Supramolecular Hydrogels

In this work, poly(N-isopropylacrylamide) (PNIPAm) grafted and multi-urea linkage segmented linear polyurethane-urea (PUU) copolymers were synthesized using α-dihydroxyl terminated PNIPAm as chain extender and water as an indirect chain extender,respectively....

Tuning Rheological Behaviors of Supramolecular Aqueous Gels via Charge Transfer Interactions

Rheological properties are critical for determining real applications of supramolecular gels in various fields. Correspondingly, the modulation of gel rheology will be very important for meeting real requirements. In this aspect, a few strategies were applied to tune the rheological behaviors of supramolecular gels, but some specific interactions like charge transfer (CT) interactions were less explored at the molecular level. Herein, we report a pyrene-containing derivative of diphenylalanine as a donor gelator and naphthalenediimide or 3,5-dinitrobenzene as matching acceptor molecules. It was found that the viscoelastic properties and strength of the original gel could be tuned through addition of different acceptor molecules to the original gel with changing the ratios of the selected acceptor molecules. As a result, storage modulus was continuously adjusted over a wide range from 190,000 to 50,000 Pa by CT interactions. Furthermore, the mechanism of the CT-induced change in rheological properties was understood and clarified through relevant techniques (e.g., UV-Vis, fluorescence, and FT-IR spectroscopy and TEM). The findings in this work would provide a novel strategy to modulate the rheological properties of supramolecular gels for adaption to broader fields of real applications.

Development of light-degradable poly(urethane-urea) hydrogel films

Biocompatible hydrogels are exciting platforms that have stood out in recent years for their outstanding potential for biomedical applications. For these applications, the ability of the material to respond to an external stimulus can be a relevant addition. This responsiveness allows the material to modify its physical properties in such a way that it can deliver molecules that support the healing process or allow easy removal of the films from the tissue. Among the polymers used to produce these systems, polyurethane (PU) and polyurethane-urea (PUU) are some of the most cited examples. In this work, a new hydrogel-sensitive PUU film is proposed. These films are prepared from polyethylene glycol (PEG) and contain a ROS-responsive telechelic β-aminoacrylate bond. The hydrogel films showed interesting mechanical and thermal properties, good water uptake and low cytotoxicity, which makes them suitable for biomedical applications. More importantly, the hydrogel films exhibited a light-degradable profile through an innovative ROS-mediated cleavage process, as indicated by the loss of mechanical properties.

Tough and biodegradable polyurethane-curcumin composited hydrogel with antioxidant, antibacterial and antitumor properties

The functionalization of tough and biodegradable hydrogels is an important way to broaden their applications in biomedical field. However, most of the hydrophobic functional drugs are difficult to incorporate with the hydrogels. In this work, curcumin (Cur), a hydrophobic functional drug, was chosen to composite with polyurethane (PU) to obtain PU-Cur hydrogels by a direct and simple in-situ copolymerization. The incorporation of curcumin in PU hydrogel increases the crosslink but reduces the hydrophilicity and degradation rate of PU-Cur hydrogels. Thus, it can increase the mechanical strength to a maximum of 6.4±0.8 MPa and initial modulus to a maximum of 3.0±0.4 MPa. More importantly, curcumin incorporated in PU networks is not deactivated. The degradation products of PU-Curs at relatively low concentrations (2.5 mg/mL) can scavenge free radicals very efficiently (maximum over 90%), which exhibits strong antioxidant properties to improve wound healing. Moreover, based on the photochemical activity of curcumin, notable inhibition effects of the degradation products of PU-Curs against bacteria (maximum over 80%) and cancer cells are demonstrated with blue light treatment as a photodynamic therapy (PDT). Therefore, the beneficial effects of curcumin are retained in PU-Cur hydrogels, suggesting potential use as wound dressings or tumor isolation membranes. This work proposes a promising strategy to combine hydrophobic functional drugs with hydrophilic hydrogels for applications in a wide range of biomaterials.

Biodegradable, anti-adhesive and tough polyurethane hydrogels crosslinked by triol crosslinkers

The mechanical and biodegradable properties of hydrogels are two essential properties for practical biomaterial applications. In this work, a series of biodegradable polyurethane (PU) hydrogels were successfully synthesized using two kinds of triol crosslinkers with different chain structures. One crosslinker is normal glycerol (GC) with short chain length, and the other is biodegradable poly (ε-caprolactone)-triol (CAPA) with long chain length. All PU hydrogels showed considerable water uptake around ~60%, excellent strength (above 3 MPa), advisable modulus (0.9~1.7 MPa), high elasticity (above 700%), as well as good biodegradability and biocompatibility. Hydrogen bonds served as reversible sacrificial bonds in the PU hydrogels endow them good toughness with partial hysteresis during deformation. The biodegradable long chain crosslinker CAPA can certainly accelerate the degradation of PU hydrogels compared with the GC crosslinked hydrogels. The degradation of these hydrogels was a process of continuous erosion from the surface to interior, which contributes to the high remain of mechanical properties after 30 days-degradation. Besides, the hydrogels also show excellent antifouling ability of protein and anti-adhesion of cells. Therefore, these hydrogels suggest great potential used as biological anti-adhesive membranes or catheters.

Stretchy and strong polyurethane–urea supramolecular (PUUS) hydrogels with various stimulus-responsive behaviours: the effect of chain-extenders

This paper provides an easy synthetic strategy combined with straightforward tailoring of the physical properties and functionalities, such that optimal performance can be targeted for various applications of strong and tough supramolecular hydrogels.

Unconventional Tough Double-Network Hydrogels with Rapid Mechanical Recovery, Self-Healing, and Self-Gluing Properties

Hydrogels are polymeric materials that have a relatively high capacity for holding water. Recently, a double network (DN) technique was developed to fabricate hydrogels with a toughness comparable to rubber. The mechanical properties of DN hydrogels may be attributed to the brittle sacrificial bonding network of one hydrogel, facilitating stress dispersion, combined with ductile polymer chains of a second hydrogel. Herein, we report a novel class of tunable DN hydrogels composed of a polyurethane hydrogel and a stronger, dipole-dipole and H-bonding interaction reinforced (DHIR) hydrogel. Compared to conventional DN hydrogels, these materials show remarkable improvements in mechanical recovery, modulus, and yielding, with excellent self-healing and self-gluing properties. In addition, the new DN hydrogels exhibit excellent tensile and compression strengths and possess shape-memory properties, which make them promising for applications in engineering, biomedicine, and other domains where load bearing is required.

Biodegradable and injectable polymer–liposome hydrogel: a promising cell carrier

A biodegradable and injectable polymer–liposome hydrogel crosslinked via dynamic Schiff base bonding with distinct multi-responsive and self-healing properties can be applied as a promising cell carrier material.

Highly stretchable and mechanically stable transparent electrode based on composite of silver nanowires and polyurethane-urea

Transparent electrodes based on conventional indium-tin oxide (ITO) can hardly meet the requirements of future generations of stretchable electronic devices, including artificial skins, stretchable displays, sensors, and actuators, because they cannot retain high conductivity under substantial stretching and bending deformation. Here we suggest a new approach for fabricating highly stretchable and transparent electrodes with good stability in environments where they would be stretched repeatedly. We designed polyurethane-urea (PUU), a urethane-based polymer, to enhance the adhesion between Ag nanowires (AgNWs) and poly(dimethylsiloxane) (PDMS). The adhesion could be further improved when irradiated by intense pulsed light (IPL). After delicate optimization of the layered AgNW/PUU/PDMS structure, we fabricated a stretchable transparent electrode that could withstand 100 cycles of 50% stretching-releasing, with exceptionally high stability and reversibility. This newly developed electrode is therefore expected to be directly applicable to a wide range of high-performance, low-cost, stretchable electronic devices.

A Mechanically Strong, Highly Stable, Thermoplastic, and Self-Healable Supramolecular Polymer Hydrogel

Polymerization of glycinamide-conjugated monomer alone in concentrated aqueous solution enables facile formation of a mechanically strong and a highly stable supramolecular polymer (SP) hydrogel because of the cooperatively hydrogen-bonded crosslinking and strengthening effect from dual amide motifs. This SP hydrogel exhibits thermoplastic processability, injectability, and self-reparability because of the dynamic destruction and reconstruction of hydrogen bonds in response to temperature change.

Supramolecular gels with high strength by tuning of calix[4]arene-derived networks

Supramolecular gels comprised of low-molecular-weight gelators are generally regarded as mechanically weak and unable to support formation of free-standing structures, hence, their practical use with applied loads has been limited. Here, we reveal a technique for in situ generation of high tensile strength supramolecular hydrogels derived from low-molecular-weight gelators. By controlling the concentration of hydrochloric acid during hydrazone formation between calix-[4]arene-based gelator precursors, we tune the mechanical and ductile properties of the resulting gel. Organogels formed without hydrochloric acid exhibit impressive tensile strengths, higher than 40 MPa, which is the strongest among self-assembled gels. Hydrogels, prepared by solvent exchange of organogels in water, show 7,000- to 10,000-fold enhanced mechanical properties because of further hydrazone formation. This method of molding also allows the gels to retain shape after processing, and furthermore, we find organogels when prepared as gel electrolytes for lithium battery applications to have good ionic conductivity.

The physical properties of gel materials makes them attractive options in various applications, but supramolecular gels typically lack mechanical strength. Here, the authors present a calix[4]arene-based supramoleculer gel tuned to possess high tensile strength.

Ultraductile, notch and stab resistant supramolecular hydrogels via host–guest interactions

We present a rational design based on a new host–guest strategy for fabrication of supramolecular hydrogels with a good combination of ultraductility, notch and stab resistance as well as self-healing behavior.

Strain hardening and highly resilient hydrogels crosslinked by chain-extended reactive pseudo-polyrotaxane

Hydrogels with obvious strain hardening and high resilience properties in both stretching and compressing processes are constructed by simple free-radical copolymerization of acrylamide and reactive pseudo-polyrotaxane.