Review on upgrading organic waste to value-added carbon materials for energy and environmental applications

Value-added materials such as biochar and activated carbon that are produced using thermo-chemical conversion of organic waste have gained an emerging interest for the application in the fields of energy and environment because of their low cost and unique physico-chemical properties. Organic waste-derived materials have multifunctional abilities in the field of environment for capturing greenhouse gases and remediation of contaminated soil and water as well as in the field of energy storage and conversion. This review critically evaluates and discusses the current thermo-chemical approaches for upgrading organic waste to value-added carbon materials, performance enhancement of these materials via activation and/or surface modification, and recent research findings related to energy and environmental applications. Moreover, this review provides detailed guidelines for preparing high-performance organic waste-derived materials and insights for their potential applications. Key challenges associated with the sustainable management of organic waste for ecological and socio-economic benefits and potential solutions are also discussed.

Morphology Evolution and Control of Mo-polydopamine Coordination Complex from 2D Single Nanopetal to Hierarchical Microflowers

Controllable synthesis of functional materials is of widespread interest for particle engineering. Such a method has not been widely promoted due to the lack of recognition of the fundamental principle, especially for organic-inorganic hybrid materials. Here, as an entrance, the controllable synthesis of Mo-polydopamine coordination flowers is realized through a facile foaming method, and a 2D nanopetal as the building monomer of the flower is synthesized. Depending on the morphology evolution of Mo-dopamine complex under different conditions, and the surface iterative topology growth of the Mo-polydopamine petal, the reasons of why the Mo-polydopamine complex self-assembles into a flower structure can be attributed to the synergistic effect of multicore symbiosis and structural self-protective growth behaviors. Benefiting from the strong structure stability of the Mo-polydopamine nanopetal, a hybrid structure of MoO₂ quantum dot in situ anchoring in the N-doped 2D carbon framework is prepared by direct pyrolysis, which shows a highly reversible performance in application for lithium-ion secondary batteries (LIBs). This work enhances the possibility for the controllable synthesis of organic-inorganic hybrid materials by adjusting the multicore intergrowth and inhibiting the interfacial assembly.

Biomass-derived nanostructured carbons and their composites as anode materials for lithium ion batteries

This review focuses on the derivation of nanostructured carbons and their composite materials from biomass materials for lithium ion battery anodes.

Melamine-assisted one-pot synthesis of hierarchical nitrogen-doped carbon@MoS₂ nanowalled core-shell microspheres and their enhanced Li-storage performances

A facile and scalable one-pot approach has been developed to synthesize carbon@MoS2 core-shell microspheres by a hydrothermal method, which involves the fast formation of melamine-resorcinol-formaldehyde polymeric microspheres in situ, followed by direct growth of the MoS2 nanowalls on them. The results give unequivocal proof that melamine could be the key to forming the core-shell microspherical morphology, and the contents of MoS2 shells can be easily tuned by initial ratios of the precursors. After a simple heat treatment, the obtained carbon@MoS2 microspheres simultaneously integrate the nitrogen-doped carbon cores and the hierarchical shells which consist of few-layered MoS2 nanowalls with an expanded interlayer spacing. Their unique architectures are favourable for high electronic/ionic conductivity and accommodate volume strain during the electrochemical reaction of the MoS2 anodes in lithium-ion batteries. Thus, a very high reversibility capacity of 771 mA h g(-1) at 100 mA g(-1) after 100 cycles, and a rate capacity of 598 mA h g(-1) at 2000 mA g(-1) could be achieved for the carbon@MoS2 core-shell microspheres with the optimal composition. Furthermore, a thin carbon coating on the carbon@MoS2 microspheres could further increase the reversible capacity to 856 mA h g(-1) after 100 cycles at 100 mA g(-1). These encouraging results suggest that such a facile and efficient protocol can provide a new pathway to produce hierarchical core-shell microspheres which integrate the structural, morphological and compositional design rationales for advanced lithium-ion batteries.

Nanostructured Mo-based electrode materials for electrochemical energy storage

This review focuses on the recent progress in nanostructured Mo-based electrode materials for rechargeable lithium/sodium-ion batteries, Mg batteries, and supercapacitors.