Poly(norepinephrine)-Mediated Universal Surface Modification for Patterning Human Pluripotent Stem Cell Culture and Differentiation

Maintaining undifferentiated states of human pluripotent stem cells (hPSCs) is key to accomplishing successful hPSC research. Specific culture conditions, including hPSC-compatible substrates, are required for the hPSC culture. Over the past two decades, substrates supporting hPSC self-renewal have evolved from undefined and xenogeneic protein components to chemically defined and xenogeneic-free materials. However, these synthetic substrates are often costly and complex to use, leading many laboratories to continue using simpler undefined extracellular matrix (ECM) protein mixtures. In this study, we present a method using poly(norepinephrine) (pNE) for surface modification to enhance the immobilization of ECM proteins on various substrates, including polydimethylsiloxane (PDMS) and ultralow attachment (ULA) hydrogels, thereby supporting hPSC culture and maintenance of pluripotency. The pNE-mediated surface modification enables spatial patterning of ECM proteins on nonadhesive ULA surfaces, facilitating tunable macroscopic cell patterning. This approach improves hPSC attachment and growth and allows for cell patterning to study the effects of anisotropic environments on the hPSC fate. Our findings demonstrate the versatility and simplicity of pNE-mediated surface modification for improving hPSC culture and spatially controlled differentiation into endothelial cells and cardiomyocytes on previously nonamenable substrates, providing a valuable tool for tissue engineering and regenerative medicine applications.

Effect of Glycosaminoglycans on Cryptosporidium Oocyst Attachment and Excystation

Cryptosporidium causes severe gastrointestinal disease resulting from the ingestion of oocysts, followed by oocyst excystation in the small intestine and the release of infective sporozoites. An understudied strategy for Cryptosporidium inactivation is purposeful oocyst excystation, as sporozoites do not survive long in the environment. This study showed that C. parvum oocyst excystation was induced by direct contact with various glycosaminoglycans (GAGs), including heparin (Hep), chondroitin sulfate A (CSA), and hyaluronan (HA), assembled on polydopamine (PD)-functionalized surfaces. PD surfaces elicited 97.9 ± 3.6% oocyst attachment, with some of the attached oocysts partially (7.3 ± 1.3%) or fully (4.0 ± 0.6%) excysted after 4 days. The PD-GAG surfaces (GAG concentration = 2 mg/mL) elicited similarly high attachment (>97%) and higher oocyst excystation efficiencies after 4 days. The PD-Hep surfaces elicited the highest number of attached excysted oocysts (11.8 ± 0.63% partially excysted; 11.9 ± 0.49% fully excysted), and the PD-HA surfaces elicited the lowest (8.8 ± 2.1% partially excysted; 7.8 ± 1.2% fully excysted). Surface characterization revealed that the addition of GAGs to the PD surface changed both the surface roughness as well as the surface wettability. Treatment of oocysts with an enzyme that degraded the surface glycocalyx markedly reduced excystation (to <2%) of the oocysts attached to the PD and PD-GAG surfaces. These findings suggest that GAGs provide an important local signal for the excystation of C. parvum oocysts and that certain surface-expressed oocyst receptors are necessary for efficient excystation. These oocyst-receptor relationships may be useful in the design of functionalized surfaces for the purposeful inactivation of oocysts in the environment or in water treatment systems. IMPORTANCE Polydopamine surfaces functionalized with glycosaminoglycans were shown to facilitate the attachment and excystation of Cryptosporidium parvum oocysts. Our findings suggest that a surface-expressed receptor on the oocyst wall plays a key role in excystation, with glycosaminoglycans serving as ligands that trigger the initiation of the process. Future technologies and treatment strategies designed to promote premature excystation of oocysts will minimize the ingestion of sporozoites that initiate infection. Therefore, the results from this study have important implications for the protection of public health from waterborne cryptosporidiosis and may serve as a foundation for engineered surfaces designed to remove oocysts from surface waters or inactivate oocysts in water treatment systems.

Polydopamine-assisted grafting of chitosan on porous poly (L-lactic acid) electrospun membranes for adsorption of heavy metal ions

In this study, a versatile method for the manufacturing of chitosan-grafted porous poly (L-lactic acid) (P-PLLA) nanofibrous membrane by using polydopamine (PDA) as an intermediate layer has been developed. P-PLLA fibres were electrospun and collected as nano/micro fibrous membranes. Highly porous fibres could serve as a substrate for chitosan to adsorb heavy metal ions. Moreover, PDA was used to modify P-PLLA surface to increase the coating uniformity and stability of chitosan. Due to the very high surface area of P-PLLA membranes and abundant amine groups of both PDA and chitosan, the fabricated membranes were utilized as adsorbent for removal of copper (Cu²⁺) ions from the wastewater. The adsorption capability of Cu²⁺ ions was examined with respect to the PDA polymerization times, pH, initial metal ion concentration and time. Finally, the equilibrium adsorption data of chitosan-grafted membranes fitted well with the Langmuir isotherm with the maximum adsorption capacity of 270.27 mg/g.

Polyisobutylene-Based Thermoplastic Elastomers for Manufacturing Polymeric Heart Valve Leaflets: In Vitro and In Vivo Results

Superior polymers represent a promising alternative to mechanical and biological materials commonly used for manufacturing artificial heart valves. The study is aimed at assessing poly(styrene-block-isobutylene-block-styrene) (SIBS) properties and comparing them with polytetrafluoroethylene (Gore-texTM, a reference sample). Surface topography of both materials was evaluated with scanning electron microscopy and atomic force microscopy. The mechanical properties were measured under uniaxial tension. The water contact angle was estimated to evaluate hydrophilicity/hydrophobicity of the study samples. Materials’ hemocompatibility was evaluated using cell lines (Ea.hy 926), donor blood, and in vivo. SIBS possess a regular surface relief. It is hydrophobic and has lower strength as compared to Gore-texTM (3.51 MPa vs. 13.2/23.8 MPa). SIBS and Gore-texTM have similar hemocompatibility (hemolysis, adhesion, and platelet aggregation). The subcutaneous rat implantation reports that SIBS has a lower tendency towards calcification (0.39 mg/g) compared with Gore-texTM (1.29 mg/g). SIBS is a highly hemocompatible material with a promising potential for manufacturing heart valve leaflets, but its mechanical properties require further improvements. The possible options include the reinforcement with nanofillers and introductions of new chains in its structure.

Simple Coatings to Render Polystyrene Protein Resistant

Non-specific protein adsorption is detrimental to the performance of many biomedical devices. Polystyrene is a commonly used material in devices and thin films. Simple reliable surface modification of polystyrene to render it protein resistant is desired in particular for device fabrication and orthogonal functionalisation schemes. This report details modifications carried out on a polystyrene surface to prevent protein adsorption. The trialed surfaces included Pluronic F127 and PLL-g-PEG, adsorbed on polystyrene, using a polydopamine-assisted approach. Quartz crystal microbalance with dissipation (QCM-D) results showed only short-term anti-fouling success of the polystyrene surface modified with F127, and the subsequent failure of the polydopamine intermediary layer in improving its stability. In stark contrast, QCM-D analysis proved the success of the polydopamine assisted PLL-g-PEG coating in preventing bovine serum albumin adsorption. This modified surface is equally as protein-rejecting after 24 h in buffer, and thus a promising simple coating for long term protein rejection of polystyrene.

Bacterial adaptability of enzyme and pH dual-responsive surface for infection resistance

A major challenge in antibacterial surface preparation is the elaborated implement of controlled antibacterial agent delivery on demand. We present a bacterial hyaluronidase (HAase) and pH dual-responsive antimicrobial surface, with excellent biocompatibility under physiological conditions and releasing vancomycin (Van) once bacteria invade.

Functional Coupling of Human Microphysiology Systems: Intestine, Liver, Kidney Proximal Tubule, Blood-Brain Barrier and Skeletal Muscle

Organ interactions resulting from drug, metabolite or xenobiotic transport between organs are key components of human metabolism that impact therapeutic action and toxic side effects. Preclinical animal testing often fails to predict adverse outcomes arising from sequential, multi-organ metabolism of drugs and xenobiotics. Human microphysiological systems (MPS) can model these interactions and are predicted to dramatically improve the efficiency of the drug development process. In this study, five human MPS models were evaluated for functional coupling, defined as the determination of organ interactions via an in vivo-like sequential, organ-to-organ transfer of media. MPS models representing the major absorption, metabolism and clearance organs (the jejunum, liver and kidney) were evaluated, along with skeletal muscle and neurovascular models. Three compounds were evaluated for organ-specific processing: terfenadine for pharmacokinetics (PK) and toxicity; trimethylamine (TMA) as a potentially toxic microbiome metabolite; and vitamin D3. We show that the organ-specific processing of these compounds was consistent with clinical data, and discovered that trimethylamine-N-oxide (TMAO) crosses the blood-brain barrier. These studies demonstrate the potential of human MPS for multi-organ toxicity and absorption, distribution, metabolism and excretion (ADME), provide guidance for physically coupling MPS, and offer an approach to coupling MPS with distinct media and perfusion requirements.

Dual-functional anticoagulant and antibacterial blend coatings based on gemini quaternary ammonium salt waterborne polyurethane and heparin

A simple design of the dual-functional anticoagulant and antibacterial blend coatings with controlled release of heparin.

Infection-resistant styrenic thermoplastic elastomers that can switch from bactericidal capability to anti-adhesion

Infection-resistant styrenic thermoplastic elastomers that can switch from bactericidal capability to anti-adhesion are facilely chloromethylated, followed by quaternization with methyl 3-(dimethylamino) propionate.

Nanotechnology for the Prevention and Treatment of Cataract

PURPOSE

The purpose of this article was to review recent advances in the applications of nanotechnology in cataract treatment and prevention strategies.

DESIGN

A literature review on the use of nanotechnology for the prevention and treatment of cataract was done.

METHODS

Research articles about nanotechnology-based treatments and prevention technologies for cataract were searched on Web of Science, and the most recent advances were reported.

RESULTS

Nonsteroid anti-inflammatory drugs, natural antioxidants, biologic and chemical chaperones, and chaperones such as molecules have found great application in preventing and treating cataracts. Current scientific research on new treatment strategies, which focuses on the biochemical basis of the disease, will likely result in new anticataract agents. However, none of the drug formulations will be approved for use unless efficient delivery is promised. Nanoparticle engineering together with biomimetic strategies enable the development of next-generation, more efficient, less complex, and personalized treatments.

CONCLUSIONS

The only currently available treatment for cataracts, surgical replacement of the opacified lens, is not an easily accessible option in developing countries. New treatment strategies based on topical drugs would enable treatment to reach massive populations facing the threat of blindness and more effectively deal with the postsurgical complications. Nanotechnology plays a key role in improving drug delivery systems with enhanced controlled release, targeted delivery, and bioavailability to overcome diffusion limitations in the eye.

Synthesis of poly(poly(ethylene glycol) methacrylate)-polyisobutylene ABA block copolymers by the combination of quasiliving carbocationic and atom transfer radical polymerizations

Systematic investigations are carried out on the synthesis of a series of new, unique ABA-type triblock copolymers consisting of the hydrophobic and chemically inert polyisobutylene (PIB) inner and the hydrophilic comb-shaped poly(poly(ethylene glycol) methacrylate) (PPEGMA) polymacromonomer as an outer block. Telechelic PIB macroinitiators with narrow molecular weight distributions (MWD) are synthesized by quasiliving carbocationic polymerization of isobutylene with a bifunctional initiator followed by quantitative chain end derivatizations. Atom transfer radical polymerization (ATRP) of PEGMAs with various molecular weights is investigated by using these macroinitiators. It is found that CuBr is an inefficient ATRP catalyst, while CuCl leads to high, nearly complete conversions of the PEGMA macromonomers. Gel permeation chromatography (GPC) analyses reveal slow initiation of PEGMA at relatively high PIB/PEGMA ratios or with PEGMAs of higher molecular weights due to steric hindrance between the macroinitiator and macromonomer. The occurrence of slow initiation, and not permanent termination, is proven by highly efficient ATRP of a low-molecular-weight monomer, methyl methacrylate, with the block copolymers as macroinitiators. Successful synthesis of PPEGMA-PIB-PPEGMA ABA block copolymers is obtained by using either low-molecular-weight PEGMA or relatively low macroinitiator/macromonomer ratios. Differential scanning calorimetry (DSC) indicates phase separation and significant suppression of the crystallinity of the pendant poly(ethylene glycol) (PEG) chains in these new block copolymers.