Quantum dynamics studies of isotope effects in the Mg+(3p) + HD → MgH+/MgD+ + D/H insertion reaction

The time-dependent wave packet quantum dynamics studies for the Mg+(3p) + HD → MgH+/MgD+ + D/H diabatic reaction are carried out for the first time on recently developed diabatic YHWCH potential energy surfaces [Phys. Chem. Chem. Phys., 2018, 20, 6638-6647]. The results of reaction probabilities and total integral cross sections show a dramatic preference to the formation of MgD+ over MgH+ owing to the insertion reaction mechanism in the title reaction. The MgD+/MgH+ branching ratio witnesses a monotonic decrease from 10.58 to 3.88 at collision energy range of 0.01 to 0.20  eV, and at the collision energy of 0.114  eV, it is close to the experimental value of 5. The rovibrational state-resolved ICSs of the two channels show the products MgD+ have higher vibrational excitation and hotter rotational state distributions. The opacity function P(J) suggests that the MgH+ + D channel and MgD+ + H channel are dominated by high-b and low-b collisions, respectively. Both forward and backward scattering peaks are found in the differential cross section curves, whereas the angle distributions of products are not strictly forward-backward symmetric because of the short lifetime of the complex in the reaction.

Dynamics study on the non-adiabatic Na(3p) + HD → NaH/NaD + D/H reaction: insertion-abstraction mechanism

Time-dependent wave packet calculations are carried out for two reaction channels of the non-adiabatic Na(3p) + HD → NaH/NaD + D/H reaction. The potential well on the excited state potential energy surface makes the reaction preferable to proceed through the insertion reaction path. The dominance of the NaD + H reaction channel and product rotational state distributions are found to be in agreement with the characteristics of typical adiabatic insertion reactions. However, significant forward scattering peaks in the differential cross sections (DCS) are found to be inconsistent with the forward-backward symmetric scattering characteristic of typical adiabatic insertion reactions, which indicate that the Na(3p) + HD reaction is dominated by a direct reaction mechanism. The comparison between adiabatic and non-adiabatic calculated DCSs reveals that the non-adiabatic couplings in the reaction could reduce the lifetime of the intermediate complex. Finally, the insertion-abstraction mechanism is put forward for the non-adiabatic Na(3p) + HD reaction.

A neural network potential energy surface for the NaH2 system and dynamics studies on the H(2S) + NaH(X1Σ+) → Na(2S) + H2(X1Σg+) reaction

In order to study the dynamics of the reaction H(²S) + NaH(X¹Σ⁺) → Na(²S) + H₂(X¹Σ_g⁺), a new potential energy surface (PES) for the ground state of the NaH₂ system is constructed based on 35 730 ab initio energy points. Using basis sets of quadruple zeta quality, multireference configuration interaction calculations with Davidson correction were carried out to obtain the ab initio energy points. The neural network method is used to fit the PES, and the root mean square error is very small (0.00639 eV). The bond lengths, dissociation energies, zero-point energies and spectroscopic constants of H₂(X¹Σ_g⁺) and NaH(X¹Σ⁺) obtained on the new NaH₂ PES are in good agreement with the experiment data. On the new PES, the reactant coordinate-based time-dependent wave packet method is applied to study the reaction dynamics of H(²S) + NaH(X¹Σ⁺) → Na(²S) + H₂(X¹Σ_g⁺), and the reaction probabilities, integral cross-sections (ICSs) and differential cross-sections (DCSs) are obtained. There is no threshold in the reaction due to the absence of an energy barrier on the minimum energy path. When the collision energy increases, the ICSs decrease from a high value at low collision energy. The DCS results show that the angular distribution of the product molecules tends to the forward direction. Compared with the LiH₂ system, the NaH₂ system has a larger mass and the PES has a larger well at the H-NaH configuration, which leads to a higher ICS value in the H(²S) + NaH(X¹Σ⁺) → Na(²S) + H₂(X¹Σ_g⁺) reaction. Because the H(²S) + NaH(X¹Σ⁺) → Na(²S) + H₂(X¹Σ_g⁺) reaction releases more energy, the product molecules can be excited to a higher vibrational state.

Influence of rovibrational excitation on the non-diabatic state-to-state dynamics for the Li(2p) + H2 → LiH + H reaction

The non-adiabatic state-to-state dynamics of the Li(2p) + H2 → LiH + H reaction has been studied using the time-dependent wave packet method, based on a set of diabatic potential energy surfaces recently developed by our group. Integral cross sections (ICSs) can be increase more than an order of magnitude by the vibrational excitation of H2, whereas the ICSs are barely affected by the rotational excitation of H2. Moreover, ICSs of the title reaction with vibrationally excited H2 decrease rapidly with increasing collision energy, which is a typical feature of non-threshold reaction. This phenomenon implies that the title reaction can transformed from an endothermic to an exothermic reaction by vibrational excitation of H2. With the increase of the collision energy, the sideways and backward scattered tendencies of LiH for the Li(2p) + H2(v = 0, j = 0, 1) → LiH + H reactions are enhanced slightly, while the backward scattering tendency of LiH for the Li(2p) + H2(v = 1, j = 0) → LiH + H reaction becomes remarkably weakened. For the reaction with vibrationally excited H2 molecule, both direct and indirect reaction mechanism exist simultaneously.

A global potential energy surface and dynamics study of the Au+ + H2 → H + Au+H reaction

A global potential energy surface (PES) of the ground state of the Au⁺H₂ system was constructed using a neural network method with permutation invariant polynomials.

A new potential energy surface of LiHCl system and dynamic studies for the Li(2S) + HCl(X1Σ+) → LiCl(X1Σ+) + H(2S) reaction

A new global potential energy surface (PES) is constructed for the ground state of LiHCl system based on high-quality ab initio energy points calculated using multi-reference configuration interaction calculations with the Davidson correction. The AVQZ and WCVQZ basis sets are employed for H and Li atoms, respectively. To compensate the relativistic effects of heavy element, the AWCVQZ-DK basis set is employed for Cl atom. The neural network method is used for fitting the PES, and the root mean square error is small (1.36 × 10^-2 eV). The spectroscopic constants of the diatoms obtained from the new PES agree well with experimental data. The geometric characteristics of the transition state and the complex are examined and compared with the previous theoretical values. To study the reaction dynamics of the Li(²S) + HCl(X¹Σ⁺) → LiCl(X¹Σ⁺) + H(²S) reaction, quantum reactive scattering dynamics calculations using collection reactant-coordinate-based wave packet method are conducted based on the new PES. The results of the reaction probabilities indicate that a small barrier exists along the reaction path as observed from the PES. The integral cross section curves reveal that the product molecule LiCl is easily excited. In addition, the reaction is dominated by forward scattering, and similar pattern is observed from Becker's experiment.

Global diabatic potential energy surfaces and quantum dynamical studies for the Li(2p) + H2(X(1)Σ(+)g) → LiH(X(1)Σ(+)) + H reaction

The global diabatic potential energy surfaces which are correlated with the ground state 1A' and the excited state 2A' of the Li(2p) + H2 reaction are presented in this study. The multi-reference configuration interaction method and large basis sets (aug-cc-pVQZ for H atom and cc-pwCVQZ for Li atom) were employed in the ab initio single-point energy calculations. The diabatic potential energies were generated by the diabatization scheme based on transition dipole moment operators. The neural network method was utilized to fit the matrix elements of the diabatic energy surfaces, and the root mean square errors were extremely small (3.69 meV for , 5.34 meV for and 5.06 meV for ). The topographical features of the diabatic potential energy surfaces were characterized and the surfaces were found to be sufficiently smooth for the dynamical calculation. The crossing seam of the conical intersections between the and surfaces were pinpointed. Based on this new analytical diabatic potential energy surfaces, time-dependent wave packet calculation were conducted to investigate the mechanism of the title reaction. At low collision energies, the product LiH molecule tends to forward scattering, while at high collision energies, the forward and backward scatterings exist simultaneously.

A new potential energy surface for the H2S system and dynamics study on the S((1)D) + H2(X(1)Σg(+)) reaction

We constructed a new global potential energy surface (PES) for the electronic ground state ((1)A') of H2S based on 21,300 accurate ab initio energy points over a large configuration space. The ab initio energies are obtained from multireference configuration interaction calculations with a Davidson correction using basis sets of quadruple zeta quality. The neural network method is applied to fit the PES, and the root mean square error of fitting is small (1.68 meV). Time-dependent wave packet studies for the S((1)D) + H2(X(1)Σg(+)) → H((2)S) + SH(X(2)Π) reaction on the new PES are conducted to study the reaction dynamics. The calculated integral cross sections decrease with increasing collision energy and remain fairly constant within the high collision energy range. Both forward and backward scatterings can be observed as expected for a barrierless reaction with a deep well on the PES. The calculated integral cross sections and differential cross sections are in good agreement with the experimental results.

A new potential energy surface for the ground electronic state of the LiH2 system, and dynamics studies on the H((2)S) + LiH(X(1)Σ(+)) → Li((2)S) + H2(X(1)Σg(+)) reaction

A new global potential energy surface (PES) is obtained for the ground electronic state of the LiH2 system based on high-level energies. The energy points are calculated at the multireference configuration interaction level with aug-cc-pVXZ (X = Q, 5) basis sets, and these energies are extrapolated to the complete basis set limit. The neural network method and hierarchical construction scheme are applied in the fitting process and the root mean square error of the fitting result is very small (0.004 eV). The dissociation energies and equilibrium distances for LiH(X(1)Σ(+)) and H2(X(1)Σg(+)) obtained from the new PES are in good agreement with the experimental data. On the new PES, time-dependent wave packet studies for the H((2)S) + LiH(X(1)Σ(+)) → Li((2)S) + H2(X(1)Σg(+)) reaction have been carried out. In this reaction, no threshold is found due to the absence of an energy barrier on the minimum energy path. The calculated integral cross sections are high at low collision energy and will decrease with the increase of the collision energy. The product molecule H2 tends to be forward scattering due to direct reactive collisions, which becomes more evident at higher collision energies.