High Cycle-Life Twistocaloric Cooling of Poly-p-Phenylene Benzodioxole Fibers

It is an urgent need to develop efficient solid state cooling technologies and materials with high cycle life. Poly-p-phenylene benzodioxole (PBO) is a high performance fiber with excellent mechanical properties. In this work, for the first time, elasto- and twistocaloric cooling of PBO fibers by stretching and twisting of the PBO fiber bundles is reported. The cooling temperature reaches -0.4 and -1.3 K, for fiber stretching and twisting, respectively. A self-coiled PBO fiber achieves maximum cooling of -3.7 K upon stretching by 35% strain, with an exceptionally high cycle life of 200 000 times. During the twisting of the PBO fibers, reversible changes in the intensity of the diffraction peaks in X-ray diffraction patterns are observed. A strain-sensitive color change application is realized by coating a self-coiled PBO fiber with liquid crystallite dyes. This work provides new perspectives for PBO fibers as a high cycle-life solid-state refrigeration material.

Enhancement of hydrophobicity and UV aging resistance of Poly (p-phenylene benzobisoxazole) fibers modified by fluorosilane and UV absorber

Poly (p-phenylene benzobisoxazole) (PBO) fibers were functionalized by 3-Glycidoxypropyltrimethoxysilane (KH-560) and then coated with 1 H, 1 H, 2 H, 2H-Perfluorodecyltrimethoxysilane (HFTES) and UV absorber (UV-328) to improve hydrophobicity and UV aging resistance. The chemical compositions of PBO fibers before and after modification were analyzed by XPS and surface morphologies were observed by SEM. The hydrophobicity of PBO fibers was evaluated by the measurement of contact angle for water and the UV aging resistance was evaluated by the tensile strength retention ratio of PBO fibers. The results showed that KH-560 was successfully introduced onto the PBO fiber surface. The contact angle for water was increased by 128% from 51.7° to 127°, suggesting a huge improvement of hydrophobicity. The UV aging resistance of PBO fibers was also greatly improved. After 400 h UV exposure, the tensile strength retention ratio was increased to 53%, which was much higher than that of 21.4% for pristine PBO fibers. And the results of variable coating times demonstrated that the optimal UV aging resistance was obtained by coating three times.

Reactive Molecular Simulation of the Damage Mitigation Efficacy of POSS-, Graphene-, and Carbon Nanotube-Loaded Polyimide Coatings Exposed to Atomic Oxygen Bombardment

Reactive molecular dynamics simulation was employed to compare the damage mitigation efficacy of pristine and polyimide (PI)-grafted polyoctahedral silsesquioxane (POSS), graphene (Gr), and carbon nanotubes (CNTs) in a PI matrix exposed to atomic oxygen (AO) bombardment. The concentration of POSS and the orientation of Gr and CNT nanoparticles were further investigated. Overall, the mass loss, erosion yield, surface damage, AO penetration depth, and temperature evolution are lower for the PI systems with randomly oriented CNTs and Gr or PI-grafted POSS compared to those of the pristine POSS or aligned CNT and Gr systems at the same nanoparticle concentration. On the basis of experimental early degradation data (before the onset of nanoparticle damage), the amount of exposed PI, which has the highest erosion yield of all material components, on the material surface is the most important parameter affecting the erosion yield of the hybrid material. Our data indicate that the PI systems with randomly oriented Gr and CNT nanoparticles have the lowest amount of exposed PI on the material surface; therefore, a lower erosion yield is obtained for these systems compared to that of the PI systems with aligned Gr and CNT nanoparticles. However, the PI/grafted-POSS system has a significantly lower erosion yield than that of the PI systems with aligned Gr and CNT nanoparticles, again due to a lower amount of exposed PI on the surface. When comparing the PI systems loaded with PI-grafted POSS versus pristine POSS at low and high nanoparticle concentrations, our data indicate that grafting the POSS and increasing the POSS concentration lower the erosion yield by a factor of about 4 and 1.5, respectively. The former is attributed to a better dispersion of PI-grafted POSS versus that of the pristine POSS in the PI matrix, as determined by the radial distribution function.

Scaly bionic structures constructed on a polyester fabric with anti-fouling and anti-bacterial properties for highly efficient oil–water separation

Scaly structure bionic structured on the fabric with superhydrophilicity and underwater superoleophobicity. The modified fabric showed excellent separation efficiency for various oil–water mixtures which could solve oil–water separation issue.