Mn3O4 nano-octahedrons embedded in nitrogen-doped graphene oxide as potent anode material for lithium-ion batteries

Mn3O4 nano-octahedrons embedded in N-doped graphene oxide (MNGO) nanosheets were synthesized using a simple, energy-efficient, and rapid microwave-digested hydrothermal route in a single step. The structural and morphological aspects of synthesized materials were evaluated by XRD, IR, Raman, FE-SEM, and HR-TEM techniques. Then, the composite MNGO was tested for its Li-ion storage properties and compared with reduced graphene oxide (rGO) and Mn3O4 materials. The MNGO composite exhibited superior reversible specific capacity, excellent cyclic stability, and outstanding structural integrity throughout the electrochemical studies. The MNGO composite showed a reversible capacity of 898 mA h g-1 after 100 cycles at 100 mA g-1 and Coulombic efficiency of 97.8%. Even at a higher current density of 500 mA g-1, it exhibits a higher specific capacity of 532 mA h g-1 (~1.5 times higher than commercial graphite anode). These results demonstrate that Mn3O4 nano-octahedrons embedded on N-doped GO are a highly durable and potent anode material for LIBs.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11581-023-05035-6.

Highly efficient surface sequestration of Pb2+ and Cr3+ from water using a Mn3O4 anchored reduced graphene oxide: Selective removal of Pb2+ from real water

Owing to the ubiquitous existence of detrimental heavy metals in the environment, simple adsorption-oriented approaches are becoming increasingly appealing for the effective removal of Pb²⁺ and Cr³⁺ from water bodies. These techniques use nanocomposites (NC) of reduced graphene oxide (rGO) and Mn₃O₄ (rGO-Mn₃O₄), they employ a hydrothermal technique featuring NaBH₄ and NaOH solutions. Here, spectroscopic and microscopic instrumental techniques were used to evaluate the morphological and physicochemical characteristics of prepared reduced graphene oxide manganese oxide (rGO-Mn₃O₄), revealing that it possessed a well-defined porous structure with a specific surface area of 126 m² g^-1. The prepared rGO-Mn₃O₄ had significant adsorption efficiencies for Pb²⁺ and Cr³⁺, achieving maximum sequestration capacities of 130.28 and 138.51 mg g^-1 for Pb²⁺ and Cr³⁺, respectively, according to the Langmuir model. These adsorption capacities are comparable to or greater than those of previously reported graphene-based materials. The Langmuir isotherm and pseudo-second-order models adequately represented the experimental results. Thermodynamic analysis revealed that adsorption occurred through spontaneous endothermic reactions. Recycling studies showed that the developed r-GO-Mn₃O₄ had excellent recyclability, with <70% removal at the 5th cycle; its feasibility was evaluated using industrial wastewater, suggesting that Pb²⁺ was selectively removed from Pb²⁺ and Cr³⁺ contaminated water. The instrumental analysis and surface phenomena studies presented here revealed that the adsorptive removal processes of both heavy metals involved π electron donor-acceptor interactions, ion exchange, and electrostatic interactions, along with surface complexation. Overall, the developed rGO-Mn₃O₄ has the potential to be a high-value adsorbent for removing heavy metals.

Visible Light-Driven Photoelectrocatalytic Water Splitting Using Z-Scheme Ag-Decorated MoS2/RGO/NiWO4 Heterostructure

Herein, we have successfully constructed a solid-state Z-scheme photosystem with enhanced light absorption capacity by combining the optoelectrical properties of AgNPs with those of the MoS2/RGO/NiWO4 (Ag-MRGON) heterostructure. The Ag-MRGON Z-scheme system demonstrates improved photo-electrochemical (PEC) water-splitting performance in terms of applied bias photon-to-current conversion efficiency (ABPE), which is 0.52%, and 17.3- and 4.3-times better than those of pristine MoS2 and MoS2/NiWO4 photoanodes, respectively. The application of AgNPs as an optical property enhancer and RGO as an electron mediator improved the photocurrent density of Ag-MRGON to 3.5 mA/cm2 and suppressed the charge recombination to attain the photostability of ∼2 h. Moreover, the photocurrent onset potential of the Ag-MRGON heterojunction (i.e., 0.61 VRHE) is cathodically shifted compared to those of NiWO4 (0.83 VRHE), MoS2 (0.80 VRHE), and MoS2/NiWO4 heterojunction (0.73 VRHE). The improved PEC water-splitting performance in terms of ABPE, photocurrent density, and onset potential is attributed to the facilitated charge transfer through the RGO mediator, the plasmonic effect of AgNPs, and the proper energy band alignments with the thermodynamic potentials of hydrogen and oxygen evolution.

Manganese oxide synthesized from spent Zn-C battery for supercapacitor electrode application

Manganese oxide (Mn₃O₄) nanomaterials have promising potential to be used as supercapacitor electrode materials due to its high energy storage performance and environmental compatibility. Besides, every year huge volume of waste batteries including Zn-C battery ends up in landfill, which aggravates the burden of waste disposal in landfill and creates environmental and health threat. Thus, transformation of waste battery back into energy application, is of great significance for sustainable strategies. Compared with complex chemical routes which mostly apply toxic acids to recover materials from Zn-C battery, this study establishes the recovery of Mn₃O₄ particles via thermal route within 900 °C under controlled atmosphere. Synthesized Mn₃O₄ were confirmed by XRD, EDS, FTIR, XPS and Raman analysis and FESEM micrographs confirmed the coexistence of spherical and cubic Mn₃O₄ particles. Mn₃O₄ electrode derived from waste Zn-C battery demonstrate compatible electrochemical performance with standard materials and conventional synthesis techniques. Mn₃O₄ electrode exhibited highest capacitance value of 125 Fg⁻¹ at 5 mVs⁻¹ scan rate. The stability of the electrode showed good retention in discharge and charge capacity by about 80% after 2100 cycles. This study demonstrates that waste Zn-C battery can be further utilized for energy storage application, providing sustainable and economic benefits.

In situ mass change and gas analysis of 3D manganese oxide/graphene aerogel for supercapacitors

Manganese oxide nanoparticles decorated on 3D reduced graphene oxide aerogels (3D MnO_x/rGO_ae) for neutral electrochemical capacitors were successfully produced by a rapid microwave reduction process within 20 s.

Iodine-doped carbon fibers as an efficient metal-free catalyst to activate peroxymonosulfate for the removal of organic pollutants

Developing efficient and metal-free catalytic oxidation systems based on PMS activation has become an increasingly important and challenging objective in the environmental catalysis field.

2D/2D nano-hybrids of γ-MnO₂ on reduced graphene oxide for catalytic ozonation and coupling peroxymonosulfate activation

Two-dimensional reduced graphene oxide (2D rGO) was employed as both a shape-directing medium and support to fabricate 2D γ-MnO2/2D rGO nano-hybrids (MnO2/rGO) via a facile hydrothermal route. For the first time, the 2D/2D hybrid materials were used for catalytic ozonation of 4-nitrophenol. The catalytic efficiency of MnO2/rGO was much higher than either MnO2 or rGO only, and rGO was suggested to play the role for promoting electron transfers. Quenching tests using tert-butanol, p-benzoquinone, and sodium azide suggested that the major radicals responsible for 4-nitrophenol degradation and mineralization are O2(-) and (1)O2, but not ·OH. Reusability tests demonstrated a high stability of the materials in catalytic ozonation with minor Mn leaching below 0.5 ppm. Degradation mechanism, reaction kinetics, reusability and a synergistic effect between catalytic ozonation and coupling peroxymonosulfate (PMS) activation were also discussed.

Visible-light-induced photocatalysis and peroxymonosulfate activation over ZnFe2O4 fine nanoparticles for degradation of Orange II

The coupling effect of photocatalysis and PMS activation remarkably manifested in the eco-friendly ZnFe₂O₄/PMS/vis system for Orange II degradation.

A novel interfacial synthesis of MnO–NiO–reduced graphene oxide hybrid with enhanced pseudocapacitance performance

We demonstrate a synthesis of MnO–NiO–rGO hybrid via an improved interface method with DMF/water double solvent system without addition agents.

Manganese sesquioxide to trimanganese tetroxide hierarchical hollow nanostructures: effect of gadolinium on structural, thermal, optical and magnetic properties

Hollow Mn₂O₃ and Mn₃O₄ nanoparticles with different morphologies were obtained from a single precursor, MnC₂O₄.