A functional lignin-based nanofiller for flame-retardant blend

Lignin-based flame retardants represent great promising next-generation flame retardants due to their sustainability, unique aromatic structure, and high charring capability. However, their applications are still limited by the compatibility, processability, and efficiency of flame retardancy. Here, a green functional lignin-based nanofiller (lignin-diethylenetriamine/red phosphorus nanoparticles, Lignin-N-P NPs) was prepared by the chemical modification and co-precipitation. After blending with the commercial acrylonitrile butadiene styrene copolymers (ABS), the physical, chemical, and flame retardant properties of the blends reveal that Lignin-N-P NPs/ABS blend has acceptable processability, mechanical properties, and significantly improved thermal stability and fire performance. Its values of peak heat release rate and total heat released per unit area were significantly dropped 67.8% and 77.5%, respectively. This study will initiate a new design for not only flame retardants but also lignin-based materials.

Are Biogenic and Pyrogenic Mesoporous SiO2 Nanoparticles Safe for Normal Cells?

Silicon dioxide, in the form of nanoparticles, possesses unique physicochemical properties (size, shape, and a large surface to volume ratio). Therefore, it is one of the most promising materials used in biomedicine. In this paper, we compare the biological effects of both mesoporous silica nanoparticles extracted from Urtica dioica L. and pyrogenic material. Both SEM and TEM investigations confirmed the size range of tested nanoparticles was between 6 and 20 nanometers and their amorphous structure. The cytotoxic activity of the compounds and intracellular ROS were determined in relation to cells HMEC-1 and erythrocytes. The cytotoxic effects of SiO₂ NPs were determined after exposure to different concentrations and three periods of incubation. The same effects for endothelial cells were tested under the same range of concentrations but after 2 and 24 h of exposure to erythrocytes. The cell viability was measured using spectrophotometric and fluorimetric assays, and the impact of the nanoparticles on the level of intracellular ROS. The obtained results indicated that bioSiO₂ NPs, present higher toxicity than pyrogenic NPs and have a higher influence on ROS production. Mesoporous silica nanoparticles show good hemocompatibility but after a 24 h incubation of erythrocytes with silica, the increase in hemolysis process, the decrease in osmotic resistance of red blood cells, and shape of erythrocytes changed were observed.

Green assembly of high-density and small-sized silver nanoparticles on lignosulfonate-phenolic resin spheres: Focusing on multifunction of lignosulfonate

In this work, sodium lignosulfonate (SL) was introduced in the hydrothermal preparation of phenol-formaldehyde (PF) resin sphere that was subsequently used as a green reducer and support for synthesis of Ag nanoparticles (Ag NPs). The results showed that the addition amount of SL had a remarkable effect on the size of the SL incorporated PF (SLPF) spheres and the smallest particle size was obtained when 20% of SL (based on phenol mass) was added. The addition of SL increased the surface area and negative charge of SLPF spheres, which enhanced the Ag NPs loading amount accordingly. Moreover, SL also prevented Ag NPs from aggregating effectively, resulting in the high-density loading of small size Ag NPs on the SLPF spheres. Therefore, the as-prepared Ag@SLPF composites exhibited significantly enhanced catalytic activities in the 4-nitrophenol reduction than that of SL-free Ag@PF. Besides, the Ag@SLPF catalyst demonstrated superior recyclability owing to strong anchoring between the Ag NPs and the support. Consequently, the work demonstrates the incorporation of SL enables the green formation of high-density and tunable Ag NPs on the SLPF support and then endows the composite catalyst with enhanced catalytic performance, which presents a promising value-added application of lignosulfonate for functional catalyst preparation.

Morphological and Structural Properties of Amino-Functionalized Fumed Nanosilica and Its Comparison with Nanoparticles Obtained by Modified Stöber Method

In industry, silica nanoparticles (NPs) are obtained by the fuming and the precipitation method. Fumed silica NPs are commonly used in the preparation of nanocomposites because they have an extremely low bulk density (160-190 kg/m3), large surface area (50-600 m2/g), and nonporous surface, which promotes strong physical contact between the NPs and the organic phase. Fumed silica has fewer silanol groups (Si-OH) on its surface than the silica prepared by the Stöber method. However, the number of -OH groups on the fumed silica surface can be increased by pretreating them with sodium hydroxide (NaOH) before further surface modification. In this study, the effectiveness of the NaOH pretreatment was evaluated on commercial fumed silica NPs with a surface area of 200 m2/g. The number of surface -OH groups was estimated by potentiometric titration. The pretreated fumed NPs, and the precipitated NPs (prepared by the Stöber method) were modified with 3-aminopropyltriethoxysilane (APTES) to obtain A200S and nSiO2-APTES, respectively. The NPs were characterized using electron dispersive scanning (EDS), scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), BET (Brunauer-Emmett-Teller) analysis, and ζ-potential. XRD confirmed the presence of the organo-functional group on the surface of both NPs. After the amino-functionalization, the ζ-potential values of the nSiO2 and A200 changed from -35.5 mV and -14.4 mV to +26.2 mV and +11.76 mV, respectively. Consequently, we have successfully synthesized functionalized NPs with interesting, specific surface area and porosity (pore volume and size), which can be attractive materials for chemical and energy industries.

Development of Acidic Imidazolium Ionic Liquids for Activation of Kraft Lignin by Controlled Oxidation: Comprehensive Evaluation and Practical Utility

A novel, eco-friendly method for the activation of lignin by controlled oxidation was studied. The results obtained for six acidic imidazolium ionic liquids containing the hydrogen sulfate anion were compared. The key goal of this research was to increase the content of carbonyl groups in the lignin structure because these may play the main role in the transport of protons and electrons in active materials for electrochemical applications. By means of a variety of analytical techniques (FTIR, ¹³ C CP/MAS NMR, and X-ray photoelectron spectroscopy; selected reactions to determine the presence of carbonyl groups; SEM; zeta-potential analysis; thermogravimetric analysis/differential thermogravimetric analysis; and porous structure analysis), it was determined that the product obtained after treatment with 3-cyclohexyloxymethy-1-methylimidazolium hydrogen sulfate had favorable properties, in terms of the target application. Electrochemical tests proved that the obtained materials could be used as anodes in lithium batteries. The results show that the activation of lignin with ionic liquids can increase its capacity and maintain stability.

Synthesis of dextrin-stabilized colloidal silver nanoparticles and their application as modifiers of cement mortar

Various commercial dextrins were used as reducing and stabilizing agents for a novel one-step synthesis of silver nanoparticles from ammonia complexes of silver ions. As a result, stable colloids of silver were formed during the reaction with the particle size being the function of the dextrin type. The obtained colloids were characterized by UV-vis spectrophotometry, size distribution (using Non-Invasive Backscatter optics) and transmission electron microscopy (TEM). The achieved results clearly indicate the possibility of low-cost production of large quantities of colloidal silver nanoparticles using materials derived from renewable sources. The resulting silver colloids can be used for different purposes, e.g. as bactericidal agents. Combination of the aforementioned properties of nanosilver particles with plasticizing properties of dextrin enables to obtain cement mortars with increased workability and enhanced compressive strength. Moreover, the obtained material is also characterized by increased immunity to adverse impact of microorganisms.

Hydrothermal synthesis of Ag@MSiO2@Ag three core-shell nanoparticles and their sensitive and stable SERS properties

An Ag@MSiO2@Ag three core-shell architecture was synthesized by a facial hydrothermal method. The features of the sample were characterized by SEM, TEM, and AFM images, EDS analyses and absorption spectra. This novel nanostructure exhibited excellent SERS properties due to the formation of hot spots around the inner and outer Ag NPs, which were identified by theoretical calculations. A detection limit of the analyte molecule was obtained as low as 10(-11) M by using this SERS nanostructure. Moreover, the homogeneity of SERS signals from the three core-shell nanostructure was checked by Raman mapping. Our studies show that the unique Ag@MSiO2@Ag three core-shell nanostructure has significant potential to realize a SERS substrate with both sensitivity and stability, which are important in SERS-based immunoassay.

Influence of Processing Conditions on the Thermal Stability and Mechanical Properties of PP/Silica-Lignin Composites

Functional silica-lignin dual fillers were obtained via mechanical grinding of the components (Syloid 244 silica and kraft lignin). Of particular importance here is the fact that lignin is a natural polymer and particularly that it is a waste by-product of paper production, whose recycling is highly desirable. The product underwent comprehensive dispersive-morphological and thermal analysis. SiO2-lignin hybrid fillers were also used in polypropylene-based composites, extruded via corotating a twin screw machine with different screw speeds. The thermogravimetric data obtained for the extrudates confirmed that the application of the lignin into PP produces a significant char residue. Addition of silica to lignin via this new hybrid formulation has a positive effect on the thermal stability of PP/silica-lignin composites, which can be seen even when observing the temperature for the maximum rate of weight reduction. Tensile test results show that the addition of silica by means of dual filler incorporation improves the mechanical parameters in comparison with pure PP and PP/lignin composite.

Silver nanoparticle-coated “cyborg” microorganisms: rapid assembly of polymer-stabilised nanoparticles on microbial cells

Silver nanoparticles-coated “cyborg” cells.