Mechanistic Insights into Photodegradation of Organic Dyes Using Heterostructure Photocatalysts

Due to its low cost, environmentally friendly process, and lack of secondary contamination, the photodegradation of dyes is regarded as a promising technology for industrial wastewater treatment. This technology demonstrates the light-enhanced generation of charge carriers and reactive radicals that non-selectively degrade various organic dyes into water, CO2, and other organic compounds via direct photodegradation or a sensitization-mediated degradation process. The overall efficiency of the photocatalysis system is closely dependent upon operational parameters that govern the adsorption and photodegradation of dye molecules, including the initial dye concentration, pH of the solution, temperature of the reaction medium, and light intensity. Additionally, the charge-carrier properties of the photocatalyst strongly affect the generation of reactive species in the heterogeneous photodegradation and thereby dictate the photodegradation efficiency. Herein, this comprehensive review discusses the pseudo kinetics and mechanisms of the photodegradation reactions. The operational factors affecting the photodegradation of either cationic or anionic dye molecules, as well as the charge-carrier properties of the photocatalyst, are also fully explored. By further analyzing past works to clarify key active species for photodegradation reactions and optimal conditions, this review provides helpful guidelines that can be applied to foster the development of efficient photodegradation systems.

Ultrasound assisted dispersion of Bi2Sn2O7-C3N4 nanophotocatalyst over various amount of zeolite Y for enhanced solar-light photocatalytic degradation of tetracycline in aqueous solution

Bi₂Sn₂O₇-C₃N₄/Y nanophotocatalyst with various ratios of zeolite and high activity under simulated solar light irradiation were successfully synthesized using ultrasound-assisted dispersion method. The effect of different amounts of zeolite (10, 20 and 30 wt%) on the photocatalytic degradation of antibiotic tetracycline was investigated. The as-prepared nanophotocatalysts were characterized by XRD, FESEM, EDX, BET, FTIR, DRS and pH_pzc techniques. The degradation results demonstrated that, Bi₂Sn₂O₇-C₃N₄/Y(10) nanophotocatalyst with a degradation efficiency of about 80.4% is an optimum sample. This result can be attributed to the zeolite as a support that prevented the accumulation of Bi₂Sn₂O₇-C₃N₄ active phase and increased access to active sites. Furthermore, it enhanced the adsorption capacity of tetracycline on the photocatalyst surface; that it is beneficial for tetracycline photocatalytic oxidation. Also the results of the DRS analysis indicated that the sharp absorption edge for optimum sample Bi₂Sn₂O₇-C₃N₄/Y at about 480 nm and was active in the visible light range. Eventually, different operational parameters such as photocatalyst loading, concentrations of pollutant and pH solution were investigated. In addition, the degradation mechanism was suggested for TC removal.

SnO₂(β-Bi₂O₃)/Bi₂Sn₂O₇ nanohybrids doped with Pt and Pd nanoparticles: applications in visible light photocatalysis, electrical conductivity and dye-sensitized solar cells

Bi2O3-SnO2 nanocomposites formed at a nominal molar ratio of 3 : 1 and loaded with Pd/Pt nanoparticles synthesized by a sol gel-hydrothermal method with the aid of a template were thoroughly characterized by X-ray diffraction, TEM-EDX, N2 sorptiometry, diffuse reflectance UV-Vis, FTIR, photoluminescence and electrical conductivity. It has been shown that Pd and Pt stimulate the existence of β-Bi2O3 and SnO2, respectively together with the key component Bi2Sn2O7. The photocatalytic results indicate that Pd/β-Bi2O3-Bi2Sn2O7 revealed a remarkable performance for the degradation of methylene blue (MB) dye as compared to the Pt/SnO2-Bi2Sn2O7 and Bi2O3-SnO2 samples in both the UV and visible regions. The enhanced photocatalytic activity of the Pd/β-Bi2O3-Bi2Sn2O7 nanocomposite is primarily attributed to the broad contact between the β-Bi2O3 and Bi2Sn2O7 phases, which indicates high mesoporosity and heterojunction structures resulting in separation efficacy between photo-induced electron-hole pairs. Specifically, the photosensitive β-Bi2O3 is easily excited and released electrons to be accepted by Bi2Sn2O7 and Pd that might be deposited in the interlayer between β-Bi2O3 and Bi2Sn2O7. The degradation mechanism of MB over Pd/β-Bi2O3-Bi2Sn2O7 in the visible region showed that the dye degradation proceeds through evolution of ˙O2(-) and ˙OH radicals as evaluated using photoluminescence and free radical trapping experiments. An insight into the electrical properties including the dielectric constant and impedance of the materials indicates that Pd/β-Bi2O3-Bi2Sn2O7 has the highest conductivity based on increasing the ionic transport and defects at the β-Bi2O3/Bi2Sn2O7 heterojunction. This material displayed an improved photocurrent response of a higher power conversion efficiency, exceeding that of Pt/SnO2-Bi2Sn2O7 and SnBi3 by 50% and 250%, respectively, in dye-sensitized solar cells. Picosecond-resolved photoluminescence (PL) and polarization gated PL anisotropy measurements were combined to clarify the process of FRET from the excited Pd/β-Bi2O3-Bi2Sn2O7 to SD N719. This indicates that the latter structure can be proposed as a multifunctional candidate for use in dye-sensitized solar cells, as an electrical material and as an efficient photocatalyst based on its versatile structure.

Structural band-gap tuning in g-C3N4

Experimental and theoretical results uncover an almost perfectly linear relationship between the band gap and structural aspects of g-C₃N₄, allowing the tuning of the frequency at which g-C₃N₄ absorbs light.