Hydrate Technologies for CO2 Capture and Sequestration: Status and Perspectives

CO2 capture and sequestration based on hydrate technology are considered supplementary approaches for reducing carbon emissions and mitigating the greenhouse effect. Direct CO2 hydrate formation and CH4 gas substitution in natural gas hydrates are two of the main methods used for the sequestration of CO2 in hydrates. In this Review, we introduce the crystal structures of CO2 hydrates and CO2-mixed gas hydrates and summarize the interactions between the CO2 molecules and clathrate hydrate/H2O frames. In particular, we focus on the role of diffraction techniques in analyzing hydrate structures. The kinetic and thermodynamic properties then are introduced from micro/macro perspectives. Furthermore, the replacement of natural gas with CO2/CO2-mixed gas is discussed comprehensively in terms of intermolecular interactions, influencing factors, and displacement efficiency. Based on the analysis of related costs, risks, and policies, the economics of CO2 capture and sequestration based on hydrate technology are explained. Moreover, the difficulties and challenges at this stage and the directions for future research are described. Finally, we investigate the status of recent research related to CO2 capture and sequestration based on hydrate technology, revealing its importance in carbon emission reduction.

Surface Drilling Parameters and Drilling Optimization Techniques: Are They Useful Tools in Gas Hydrate Detection?

This paper examines the application of surface drilling parameters and drilling optimization techniques, such as mechanical specific energy (MSE) and equivalent strength (EST), in detecting hydrate gas-bearing sediments during drilling operations. Gas hydrates are usually detected from 3D seismic imaging and later confirmed with Measurement-While-Drilling (MWD)/Logging-While-Drilling (LWD) data and collected core samples. Here, we describe an analysis of the time-based surface drilling parameters recorded from two wells drilled during the International Ocean Discovery Program (IODP) Expedition 372A offshore of New Zealand and the Indian National Gas Hydrate Program Expedition 02 (NGHP-02) offshore of India. The investigation revealed that drilling parameters, as well as MSE/EST methods, can and should be used to monitor and optimize the drilling process and to detect lithological/tectonic (fractures, fault zones, rock hardness, etc.) changes in the drilled substrata and signs of the dynamic changes in the downhole environment (tool vibration, washouts, pack-offs, etc.). However, surface drilling parameters with MSE models cannot explicitly determine the hydrate gas-bearing sediments. This qualitative analysis of whether the gas-bearing sediments consist of hydrates can only be accomplished with the use of the MWD/LWD suite, preferably located as close as possible to the bit.

Prevention of Potential Hazards Associated with Marine Gas Hydrate Exploitation: A Review

Marine gas hydrates (MGHs), which have great potential for exploitation and utilization, account for around 99% of all global natural gas hydrate resources under current prospecting technique. However, there are several potential hazards associated with their production and development. These are classified into four categories by this paper: marine geohazards, greenhouse gas emissions, marine ecological hazards, and marine engineering hazards. In order to prevent these risks from occurring, the concept of “lifecycle management of hazards prevention” during the development and production from MGHs is proposed and divided into three stages: preparation, production control, and post-production protection. Of these stages, economic evaluation of the resource is the foundation; gas production methods are the key; with monitoring, assessment, and early warning as the guarantee. A production test in the Shenhu area of the South China Sea shows that MGH exploration and development can be planned using the “three-steps” methodology: commercializing and developing research ideas in the short term, maintaining economic levels of production in the medium term, and forming a global forum to discuss effective MGH development in the long term. When increasing MGH development is combined with the lifecycle management of hazards prevention system, and technological innovations are combined with global cooperation to solve the risks associated with MGH development, then safe access to a new source of clean energy may be obtained.

A review of plasma-assisted catalytic conversion of gaseous carbon dioxide and methane into value-added platform chemicals and fuels

CO2 and CH4 contribute to greenhouse gas emissions, while the production of industrial base chemicals from natural gas resources is emerging as well. Such conversion processes, however, are energy-intensive and introducing a renewable and sustainable electric activation seems optimal, at least for intermediate-scale modular operation. The review thus analyses such valorisation by plasma reactor technologies and heterogeneous catalysis application, largely into higher hydrocarbon molecules, that is ethane, ethylene, acetylene, propane, etc., and organic oxygenated compounds, i.e. methanol, formaldehyde, formic acid and dimethyl ether. Focus is given to reaction pathway mechanisms, related to the partial oxidation steps of CH4 with O2, H2O and CO2, CO2 reduction with H2, CH4 or other paraffin species, and to a lesser extent, to mixtures' dry reforming to syngas. Dielectric barrier discharge, corona, spark and gliding arc sources are considered, combined with (noble) metal materials. Carbon (C), silica (SiO2) and alumina (Al2O3) as well as various catalytic supports are examined as precious critical raw materials (e.g. platinum, palladium and rhodium) or transition metal (e.g. manganese, iron, cobalt, nickel and copper) substrates. These are applied for turnover, such as that pertinent to reformer, (reverse) water-gas shift (WGS or RWGS) and CH3OH synthesis. Time-on-stream catalyst deactivation or reactivation is also overviewed from the viewpoint of individual transient moieties and their adsorption or desorption characteristics, as well as reactivity.

The effect of hydrate promoters on gas uptake

Gas hydrate technology is considered as a promising technology in the fields of gas storage and transportation, gas separation and purification, seawater desalination, and phase-change thermal energy storage. However, to date, the technology is still not commercially used mainly due to the low gas hydrate formation rate and the low gas uptake. In this study, the effect of hydrate promoters on gas uptake was systematically studied and analyzed based on hydrate-based CH₄ storage and CO₂ capture from CO₂/H₂ gas mixture experiments. Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) and gas chromatography (GC) were employed to analyze the microstructures and gas compositions. The results indicate that the effect of the hydrate promoter on the gas uptake depends on the physical and chemical properties of the promoter and gas. A strong polar ionic promoter is not helpful towards obtaining the ideal gas uptake because a dense hydrate layer is easily formed at the gas-liquid interface, which hinders gas diffusion from the gas phase to the bulk solution. For a weak polar or non-polar promoter, the gas uptake depends on the dissolution characteristics among the different substances in the system. The lower the mutual solubility among the substances co-existing in the system, the higher the independence among the substances in the system; this is so that each phase has an equal chance to occupy the hydrate cages without or with small interactions, finally leading to a relatively high gas uptake.

Exploring the effects of four important factors on oil–CO2 interfacial properties and miscibility in nanopores

In this paper, effects of temperature, initial oil and injection gas compositions, and feed gas–oil ratio on oil–CO₂ interfacial tensions, interfacial thicknesses, and minimum miscibility pressures (MMPs) in nanopores are specifically studied.

Confinement of hydrogen and hydroxyl radicals in water cages: a density functional theory study

Radicals can be confined in water cages and exhibit similar structures and properties to their corresponding free forms.

Investigation of kinetics of tetrabutylammonium chloride (TBAC) + CH4 semiclathrate hydrate formation

Different from structures of TBAC hydrate, (TBAC + CH₄) hydrates were formed with hexagonal or tetragonal structure under different w.