Constructing a novel humidity sensor using acrylic acid/bagasse cellulose porous hydrogel combining graphene oxide and citral for antibacterial and intelligent fruit preservation

A novel hydrogel humidity sensor was developed using acrylic acid/bagasse cellulose (AA/BC) porous hydrogel triggered by cold plasma (CP) combining graphene oxide (GO) and embedding citral for antibacterial and intelligent fruit preservation. Results showed that both GO and citral were loaded in AA/BC and had strong hydrogen bond interaction with hydrogel. Acrylic acid/bagasse cellulose/graphene oxide (AA/BC/GO) showed the highest humidity response when the compound concentration of GO was 1.0 mg/mL and the test frequency was 1 kHz, and exhibited high electrical conductivity (-2.6 mS/cm). In addition, in continuous and cyclic relative humidity (RH) tests, the response time of AA/BC/GO from 33.70 % RH to 75.30 % RH was about 177.4 s and the recovery time was about 150.6 s, with excellent sensitivity and durability. The sensors also revealed remarkable antibacterial properties against Escherichia coli and Staphylococcus aureus, among which acrylic acid/bagasse cellulose/graphene oxide-citral (AA/BC/GO-C) was the most prominent, and could extend the shelf life of mangoes for about 8 days. By intuitively judging the appearances and total color difference (TCD) of the hydrogel sensors, it could play the role of intelligent preservation by connecting their water absorption and the release of citral. Therefore, this work provided innovative strategies for the application of hydrogel sensors in food preservation.

Cellulose Dissolution, Modification, and the Derived Hydrogel: A Review

The cellulose-based hydrogel has occupied a pivotal position in almost all walks of life. However, the native cellulose can not be directly used for preparing hydrogel due to the complex non-covalent interactions. Some literature has discussed the dissolution and modification of cellulose but has yet to address the influence of the pretreatment on the as-prepared hydrogels. Firstly, the "touching" of cellulose by derived and non-derived solvents was introduced, namely, the dissolution of cellulose. Secondly, the "conversion" of functional groups on the cellulose surface by special routes, which is the modification of cellulose. The above-mentioned two parts were intended to explain the changes in physicochemical properties of cellulose by these routes and their influences on the subsequent hydrogel preparation. Finally, the "reinforcement" of cellulose-based hydrogels by physical and chemical techniques was summarized, viz., improving the mechanical properties of cellulose-based hydrogels and the changes in the multi-level structure of the interior of cellulose-based hydrogels.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Novel Double Cross-Linked Acrylic Acid/Bagasse Cellulose Porous Hydrogel for Controlled Release of Citral and Bacteriostatic Effects

In this study, double cross-linked acrylic acid/bagasse cellulose (AA/BC) porous hydrogels were first prepared using cold plasma (CP) technology instead of chemical initiators. The structure and properties of porous hydrogels, as well as the controlled release and bacteriostatic application as functional carriers, were investigated. Results showed that a novel double cross-linked hydrogel had been successfully synthesized by utilizing ^•OH and H⁺ produced during plasma discharge. The acrylic acid (AA) monomers were successfully grafted onto the main chains of bagasse cellulose (BC), forming a porous three-dimensional network structure. The AA/BC porous hydrogels showed excellent swelling levels and intelligent responses. The release of citral in hydrogel inclusion compounds embedded with citral was controlled by adjusting the pH, and the slow release period was about 2 days. The inclusion compounds presented strong bacteriostatic effects against Escherichia coli and Staphylococcus aureus, extending the shelf life of fruits for about 4 days. Therefore, it can be concluded that CP technology is considered to be an efficient and environmental-friendly initiation technology for preparing hydrogels. The potential application of hydrogel inclusion compounds in the food field is expanded.

Cellulose/nanocellulose superabsorbent hydrogels as a sustainable platform for materials applications: A mini-review and perspective

Superabsorbent hydrogels (SAH) are crosslinked three-dimensional networks distinguished by their super capacity to stabilize a large quantity of water without dissolving. Such behavior enables them to engage in various applications. Cellulose and its derived nanocellulose can become SAHs as an appealing, versatile, and sustainable platform because of abundance, biodegradability, and renewability compared to petroleum-based materials. In this review, a synthetic strategy that reflects starting cellulosic resources to their associated synthons, crosslinking types, and synthetic controlling factors was highlighted. Representative examples of cellulose and nanocellulose SAH and an in-depth discussion of structure-absorption relationships were listed. Finally, various applications of cellulose and nanocellulose SAH, challenges and existing problems, and proposed future research pathways were listed.

Current Trends in Biomedical Hydrogels: From Traditional Crosslinking to Plasma-Assisted Synthesis

The use of materials to restore or replace the functions of damaged body parts has been proven historically. Any material can be considered as a biomaterial as long as it performs its biological function and does not cause adverse effects to the host. With the increasing demands for biofunctionality, biomaterials nowadays may not only encompass inertness but also specialized utility towards the target biological application. A hydrogel is a biomaterial with a 3D network made of hydrophilic polymers. It is regarded as one of the earliest biomaterials developed for human use. The preparation of hydrogel is often attributed to the polymerization of monomers or crosslinking of hydrophilic polymers to achieve the desired ability to hold large amounts of aqueous solvents and biological fluids. The generation of hydrogels, however, is shifting towards developing hydrogels through the aid of enabling technologies. This review provides the evolution of hydrogels and the different approaches considered for hydrogel preparation. Further, this review presents the plasma process as an enabling technology for tailoring hydrogel properties. The mechanism of plasma-assisted treatment during hydrogel synthesis and the current use of the plasma-treated hydrogels are also discussed.

Simple One Pot Preparation of Chemical Hydrogels from Cellulose Dissolved in Cold LiOH/Urea

In this work, non-derivatized cellulose pulp was dissolved in a cold alkali solution (LiOH/urea) and chemically cross-linked with methylenebisacrylamide (MBA) to form a robust hydrogel with superior water absorption properties. Different cellulose concentrations (i.e., 2, 3 and 4 wt%) and MBA/glucose molar ratios (i.e., 0.26, 0.53 and 1.05) were tested. The cellulose hydrogel cured at 60 °C for 30 min, with a MBA/glucose molar ratio of 1.05, exhibited the highest water swelling capacity absorbing ca. 220 g H2O/g dry hydrogel. Moreover, the data suggest that the cross-linking occurs via a basic Michael addition mechanism. This innovative procedure based on the direct dissolution of unmodified cellulose in LiOH/urea followed by MBA cross-linking provides a simple and fast approach to prepare chemically cross-linked non-derivatized high-molecular-weight cellulose hydrogels with superior water uptake capacity.

All-electrochemical synthesis of a three-dimensional mesoporous polymeric g-C3N4/PANI/CdO nanocomposite and its application as a novel sensor for the simultaneous determination of epinephrine, paracetamol, mefenamic acid, and ciprofloxacin

mpg-C₃N₄/PANI/CdO nanocomposite was electrochemically synthesized and used for simultaneous determination of EPI, PAR, MFA, and CIP. Also, HOMO and LUMO eigenvalues of the EPI, PAR, MFA and CIP molecules have been evaluated using the DFT method.

Synthesis of a Novel and Salt Sensitive Superabsorbent Hydrogel Using Soybean Dregs by UV-Irradiation

A biomass based hydrogel soybean dregs-Poly(acrylic acid) (SD-PAA) was synthesized under UV radiation while using agricultural waste soybean dregs. Maximum absorption of SD-PAA is 3587 g·g⁻¹ in distilled water and 302.0 g·g⁻¹ in 150 mM NaCl aqueous solution. Moreover, the influence of granularity, salt solution, and ions in the solutions on water absorption is systematically studied. Sensitivity sequence of the hydrogel to cations was K⁺ < Na⁺ < NH₄⁺ < Al³⁺ < Fe³⁺ < Mg²⁺ < Ca²⁺, and that to anions was PO₄³⁻ > SO₄²⁻ > Cl⁻. Moreover, the experimental results showed that SD-PAA water retention capability remained 37% after centrifugating for 60 min and 0.2% being dried at 60 °C for 70 h. Meanwhile, the swelling data agree well with the pseudo-second-order kinetic model and Fickian diffusion mechanism.