Unveiling Xanthine Presence in Rohu Fish Using Ag+-Doped MoS2 Nanosheets Through Electrochemical Analysis

Here, we envisage the development of the rapid, reliable, and facile electrochemical sensor for the primary detection of xanthine (Xn) which is significant for the food quality measurement, based on the silver-doped molybdenum disulfide (Ag@MoS2) nanosheets. The structural and compositional properties of the prepared samples were tested through X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photon spectroscopy (XPS). The two-dimensional (2D) MoS2 nanosheets provide the large surface area for the sensing applications and the silver ions help in the enhanced electrochemical response. The fabricated enzymatic biosensor exhibits magnificent cyclic stability with a limit of detection of 27 nM. Also, the sensor was tested for rapid, reproducible, specific, and regenerable up to 10 cycles and has a shelf life of 2 weeks. The outcomes of this study suggest that the proposed matrix could be employed for the fabrication of devices for early detection of xanthine.

Biomedical applications of graphene-based nanomaterials: recent progress, challenges, and prospects in highly sensitive biosensors

Graphene-based nanomaterials (graphene, graphene oxide, reduced graphene oxide, graphene quantum dots, graphene-based nanocomposites, etc.) are emerging as an extremely important class of nanomaterials primarily because of their unique and advantageous physical, chemical, biological, and optoelectronic aspects. These features have resulted in uses across diverse areas of scientific research. Among all other applications, they are found to be particularly useful in designing highly sensitive biosensors. Numerous studies have established their efficacy in sensing pathogens and other biomolecules allowing for the rapid diagnosis of various diseases. Considering the growing importance and popularity of graphene-based materials for biosensing applications, this review aims to provide the readers with a summary of the recent progress in the concerned domain and highlights the challenges associated with the synthesis and application of these multifunctional materials.

Plasmonic Refractive Index Sensor Enhanced with Chitosan/Au Bilayer Thin Film for Dopamine Detection

Surface plasmonic sensors have received considerable attention, found extensive applications, and outperformed conventional optical sensors. In this work, biopolymer chitosan (CS) was used to prepare the bilayer structure (CS/Au) of a plasmonic refractive index sensor for dopamine (DA) detection. The sensing characteristics of the developed plasmonic sensor were evaluated. Increasing DA concentrations significantly shifted the SPR dips. The sensor exhibited stability and a refractive index sensitivity of 8.850°/RIU in the linear range 0.1 nM to 1 µM with a detection limit of 0.007 nM and affinity constant of 1.383 × 108 M-1. The refractive index and thickness of the CS/Au structure were measured simultaneously by fitting the obtained experimental findings to theoretical data based on Fresnel equations. The fitting yielded the refractive index values n (1.5350 ± 0.0001) and k (0.0150 ± 0.0001) for the CS layer contacting 0.1 nM of DA, and the thickness, d was (15.00 ± 0.01) nm. Then, both n and d values increased by increasing DA concentrations. In addition, the changes in the FTIR spectrum and the variations in sensor surface roughness and structure obtained by AFM analysis confirmed DA adsorption on the sensing layer. Based on these observations, CS/Au bilayer has enhanced the performance of this plasmonic sensor, which showed promising importance as a simple, low-cost, and reliable platform for DA sensing.

Direct and Sensitive Detection of Dopamine Using Carbon Quantum Dots Based Refractive Index Surface Plasmon Resonance Sensor

Abnormality of dopamine (DA), a vital neurotransmitter in the brain’s neuronal pathways, causes several neurological diseases. Rapid and sensitive sensors for DA detection are required for early diagnosis of such disorders. Herein, a carbon quantum dot (CQD)-based refractive index surface plasmon resonance (SPR) sensor was designed. The sensor performance was evaluated for various concentrations of DA. Increasing DA levels yielded blue-shifted SPR dips. The experimental findings revealed an excellent sensitivity response of 0.138°/pM in a linear range from 0.001 to 100 pM and a high binding affinity of 6.234 TM⁻¹. The effects of varied concentrations of DA on the optical characteristics of CQD thin film were further proved theoretically. Increased DA levels decreased the thickness and real part of the refractive index of CQD film, according to fitting results. Furthermore, the observed reduction in surface roughness using AFM demonstrated that DA was bound to the sensor layer. This, in turn, explained the blue shift in SPR reflectance curves. This optical sensor offers great potential as a trustworthy solution for direct measurement due to its simple construction, high sensitivity, and other sensing features.

Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

Graphene-based nanocomposites with inorganic (metal and metal oxide) nanoparticles leads to materials with high catalytic activity for a variety of chemical transformations. Graphene and its derivatives such as graphene oxide, highly reduced graphene oxide, or nitrogen-doped graphene are excellent support materials due to their high surface area, their extended π-system, and variable functionalities for effective chemical interactions to fabricate nanocomposites. The ability to fine-tune the surface composition for desired functionalities enhances the versatility of graphene-based nanocomposites in catalysis. This review summarizes the preparation of graphene/inorganic NPs based nanocomposites and their use in catalytic applications. We discuss the large-scale synthesis of graphene-based nanomaterials. We have also highlighted the interfacial electronic communication between graphene/inorganic nanoparticles and other factors resulting in increased catalytic efficiencies.

Femtomolar detection of dopamine using surface plasmon resonance sensor based on chitosan/graphene quantum dots thin film

Due to the crucial role of dopamine (DA) in health and peripheral nervous systems, it is particularly important to develop an efficient and accurate sensor to monitor and determine DA concentrations for diagnostic purposes and diseases prevention. Up to now, using surface plasmon resonance (SPR) sensors in DA determination is very limited and its application still at the primary stage. In this work, a simple and ultra-sensitive SPR sensor was constructed for DA detection by preparation of chitosan- graphene quantum dots (CS-GQDs) thin film as the sensing layer. Other SPR measurements were conducted using different sensing layers; GQDs, CS for comparison. The proposed thin films were prepared by spin coating technique. The developed CS-GQDs thin film-based SPR sensor was successfully tested in DA concentration range from 0 fM to 1 pM. The designed SPR sensor showed outstanding performance in detecting DA sensitively (S = 0.011°/fM, R² = 0.8174) with low detection limit of 1.0 fM has been achieved for the first time. The increased angular shift of SPR dip, narrow full width half maximum of the SPR curves, excellent signal-to-noise ratio and figure of merit, and a binding affinity constant (K_A) of 2.962 PM^-1 demonstrated the potential of this sensor to detect DA with high accuracy. Overall, it was concluded that the proposed sensor would serve as a valuable tool in clinical diagnostic for the serious neurological disorders. This in turns has a significant socio-economic impact.

Analyzing cadmium-phytochelatin2 complexes in plant using terahertz and circular dichroism information

Phytochelatins are plants' small metal-binding peptides which chelate internal heavy metals to form nontoxic complexes. Detecting the complexes in plants would simplify identification of cultivars with both high tolerance and enrichment capabilities for heavy metals which represent phytoextraction performance. Thus, a terahertz spectroscopy combined with density functional theory, chemometrics and circular dichroism was used for characterization of phytochelatin2 (PC₂), Cd-PC₂ mixture standards, and pak choi (Brassica chinensis) leaves as a plant model. Results showed PC₂ chelates Cd²⁺ in a 2:1 ratio to form Cd(PC₂)₂ complex; Cd connected to thoils of PC₂ and changed β-turn and random coil of PC₂ peptide chain to β-Sheet which presented as terahertz vibrations of PC₂ around 1.03 and 1.71 THz being suppressed; the best models for detecting the complex in pak choi were obtained by partial least squares regression modeling combined with successive projections algorithm selection; the models used PC₂ as a natural probe for visualizing and quantifying chelated Cd in pak choi leaf and achieved a limit of detection up to 1.151 ppm. This study suggested that terahertz information of the heavy metal-PCs complexes is qualified for representing a simpler alternative to classical index for evaluating phytoextraction performance of plant; it provided a general protocol for structure analysis and detection of heavy metal-PCs complexes in plant by terahertz absorbance.

Nanoparticle-based colorimetric sensors to detect neurodegenerative disease biomarkers

Neurodegenerative disorders (NDDs) are progressive, incurable health conditions that primarily affect brain cells, and result in loss of brain mass and impaired function. Current sensing technologies for NDD detection are limited by high cost, long sample preparation, and/or require skilled personnel. To overcome these limitations, optical sensors, specifically colorimetric sensors, have garnered increasing attention towards the development of a cost-effective, simple, and rapid alternative approach. In this review, we evaluate colorimetric sensing strategies of NDD biomarkers (e.g. proteins, neurotransmitters, bio-thiols, and sulfide), address the limitations and challenges of optical sensor technologies, and provide our outlook on the future of this field.

A microfluidic paper-based colorimetric device for the visual detection of uric acid in human urine samples

The monitoring of uric acid (UA) as a clinically relevant toxic biomolecule is of particular importance for the diagnosis of various syndromes and for the monitoring of patients undergoing chemotherapy or radiation therapy. Owing to its speed, low consumption of materials, high sensitivity, convenience, and the easy detection of color changes, colorimetric methods have attracted a lot of attention compared to other methods. The use of nanoparticles has been suggested for the non-enzymatic POC detection of biological molecules such as UA. Here, a sensitive, quantitative, and rapid diagnostic method for UA using silver nanoparticles (AgNPs) is reported. The main purpose of this work is to introduce a suitable tool for future studies based on various types of AgNPs for the on-site detection of clinical samples and biomarkers using portable devices. In the present study, a novel μPCD made to measure UA was used in human urine samples. AgNPs with their peroxidase-like activity led to the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and a bluish-green color upon the decomposition of hydrogen peroxide to ˙OH. UA also reduced the oxidized TMB. The proposed method showed linear responses from 500 to 10 000 μM (using silver citrate nanoparticles (Ag-Cit)), 50 to 10 000 μM (using Ag NPrs and Au@AgNPs), and 1 to 10 000 μM (using Ag NWs). The lower limits of quantification of the proposed method for the detection of UA using Ag-Cit, Ag nanoprisms, Au@Ag core-shell nanoparticles, and Ag nanowires were 500, 50, 50, and 1 μM, respectively. As a result, the proposed assay system could potentially be utilized to detect UA in human urine samples.

A green electrolysis of silver-decorated MoS2 nanocomposite with an enhanced antibacterial effect and low cytotoxicity

To tackle the devastating microbial infections for the public health, a continuous search for effective and safe nanobiocides based on their prominent nanoscale effects has been extensively explored during past decades. In this study, a green electrolysis method was employed to synthesize silver-doped molybdenum sulfide (Ag@MoS₂) composite materials. The obtained nanocomposites exhibited a sheet-like structure with a large specific surface area, which contributed to the efficient loading and refined distribution of silver nanoparticles. G^- E. coli and G ⁺ S. aureus were used as model bacteria for the antibacterial test, which revealed enhanced antibacterial activity of produced nanocomposites with an identified destructive effect on preformed biofilms. It was found that within 72 hour incubation, 20 μg mL^-1 Ag@MoS₂ was sufficient to inhibit the growth of E. coli and S. aureus without visible colony formation, pointing to a desirable long-term antibacterial activity. Further a mechanistic antibiosis study of Ag@MoS₂ indicated the involvement of a generation of reactive oxygen species. Notably, owing to the well-distributed silver nanoparticles on the nontoxic MoS₂ nanosheet, the cytotoxicity evaluation results revealed that produced nanocomposites exhibited negligible toxicity to mammalian cells, and thereby held promising potential for biomedical applications.

The interaction of graphene oxide-silver nanoparticles with trypsin: Insights from adsorption behaviors, conformational structure and enzymatic activity investigations

In this work, we synthesized graphene oxide-silver nanoparticles (GO-AgNPs) hybrids by one-pot method. Since there are relatively few reports on whether GO-AgNPs bind and change the structure and function of trypsin, A variety of methods were employed to systematically characterize the molecular interaction between GO-AgNPs and trypsin. Results exhibited that GO-AgNPs bound with trypsin to form a ground state complex. GO-AgNPs had higher adsorption capacity for trypsin compared with single GO. Langmuir-Blodgett assembly method was used to confirm that AgNPs did not interfere with the adsorption of trypsin by GO. The secondary structure and the microenvironment of amino acid residues of trypsin were altered after interacting with GO-AgNPs. In addition, GO-AgNPs can enhance the activity of trypsin and promote the hydrolysis of bovine serum protein (BSA) by trypsin. These findings provide important support for the application of GO-based nanocomposites in the efficient immobilization of enzymes.

Selective dopamine detection by SPR sensor signal amplification using gold nanoparticles

In this study, selective and sensitive detection of neurotransmitter dopamine from both aqueous solution and biological samples was performed by surface plasmon resonance sensor based on molecular imprinting technique.

Key parameters to enhance the antibacterial effect of graphene oxide in solution

Graphene oxide (GO) has lately become an interesting biomaterial due to its stunning properties and versatility, its claimed antimicrobial activity holds promise for potential health applications. Nonetheless, multiple reports investigating GO antibacterial activity lack rigor and uniformity on several aspects which are crucial when evaluating this effect. In this work, we highlight and address these parameters: morphology of the materials, exposure time, exposure methodology and concentration. We investigate the effect of GO and GO-based metallic composites observing these parameters on two pathogenic bacteria. Our nanomaterials have been characterized by means of SEM, EDX, DLS, FTIR and Raman spectroscopies. Escherichia coli and Salmonella Typhimurium suspended in saline solutions (no growth medium) have been exposed to GO (lateral size = 100 nm), silver nanoparticles, ceria nanoparticles, GO/silver and GO/ceria aqueous solutions for 0, 5, 15, 30, 60 and 90 minutes, before plating. Our experiments indicate that no prior exposure of the materials to bacteria (0 min) results in poor inactivation rates independently of concentration, while increasing times of interaction enhance inactivation. Moreover, our experiments show concentration-dependent results showing higher activity for concentrations of 100 μg mL⁻¹; and prove that 30 minutes of exposure are sufficient to deploy the antimicrobial effects of these materials. GO possesses the lowest inactivation rate, and the presence of silver and ceria nanoparticles in the GO surface boosts its antimicrobial effect. Thus, the enhancement of the antibacterial activity of graphene oxide relies on 30 minutes of interaction in water, concentration of 100 μg mL⁻¹, and its decoration by silver/ceria nanoparticles.

We investigate the effects of material morphology, exposure time, exposure methodology and concentration of graphene oxide (GO) and GO-based materials on two pathogenic bacteria.

Fabrication of graphene oxide and sliver nanoparticle hybrids for fluorescence quenching of DNA labeled by methylene blue

Since graphene oxide‑silver nanoparticles (GO-AgNPs) have special affinities to DNA, it become increasingly important in fields of biological analysis in which GO-AgNPs nanocomposites universally functioned as a quencher. In this paper, GO-AgNPs nanocomposites with different GO to AgNPs ratios were synthesized as a fluorescence quencher to interact with DNA labeled by methylene blue (MB). The results showed that the fluorescence intensity of DNA-MB system decreased with the increasing of GO-AgNPs nanocomposites concentration. The quenching phenomenon of DNA-MB by AgNPs and GO was not a simple additive effect but a synergistic effect. The quenching efficiency of synthesized GO-AgNPs nanocomposites with different ratios (1:1, 1:3, 1:5, 1:10) increased with the decrease of GO/Ag ratio. Thermodynamic analysis was employed to investigate the interaction of GO-AgNPs and DNA-MB, it can be concluded that the intermolecular force between GO-AgNPs and DNA-MB was hydrogen bonding. Our works will provide important theoretical and experimental bases for fluorescence sensing of DNA.

The Principle of Nanomaterials Based Surface Plasmon Resonance Biosensors and Its Potential for Dopamine Detection

For a healthy life, the human biological system should work in order. Scheduled lifestyle and lack of nutrients usually lead to fluctuations in the biological entities levels such as neurotransmitters (NTs), proteins, and hormones, which in turns put the human health in risk. Dopamine (DA) is an extremely important catecholamine NT distributed in the central nervous system. Its level in the body controls the function of human metabolism, central nervous, renal, hormonal, and cardiovascular systems. It is closely related to the major domains of human cognition, feeling, and human desires, as well as learning. Several neurological disorders such as schizophrenia and Parkinson’s disease are related to the extreme abnormalities in DA levels. Therefore, the development of an accurate, effective, and highly sensitive method for rapid determination of DA concentrations is desired. Up to now, different methods have been reported for DA detection such as electrochemical strategies, high-performance liquid chromatography, colorimetry, and capillary electrophoresis mass spectrometry. However, most of them have some limitations. Surface plasmon resonance (SPR) spectroscopy was widely used in biosensing. However, its use to detect NTs is still growing and has fascinated impressive attention of the scientific community. The focus in this concise review paper will be on the principle of SPR sensors and its operation mechanism, the factors that affect the sensor performance. The efficiency of SPR biosensors to detect several clinically related analytes will be mentioned. DA functions in the human body will be explained. Additionally, this review will cover the incorporation of nanomaterials into SPR biosensors and its potential for DA sensing with mention to its advantages and disadvantages.

Facile synthesis of rGO-MoS2-Ag nanocomposites with long-term antimicrobial activities

The abuse of antibiotics has led to the emergence of numerous super resistant bacteria, which pose a serious threat to public health. Developing nanomaterials with novel modes of bactericidal activity offers the promise of fighting pathogens without the risk of causing drug resistances. Here, we used reduced graphene oxide (rGO), bulk molybdenum disulfide (MoS₂) and silver nitrate (AgNO₃) to synthesize a ternary nanocomposite, rGO-MoS₂-Ag, via a simple one-pot method. The resulting rGO-MoS₂-Ag presented as crumpled and sheet-like structures decorated with Ag nanoparticles. The minimum inhibitory concentration and minimum bactericidal concentration of rGO-MoS₂-Ag against Escherichia coli were 50 and 100 μg ml^-1, while Staphylococcus aureus reacted only to twice higher concentrations of 100 and 200 μg ml^-1, respectively. Notably, rGO-MoS₂-Ag exhibited better antibacterial activity towards E. coli and S. aureus than rGO, MoS₂, or rGO-MoS₂. This result can be attributed to the excellent performance of rGO-MoS₂-Ag in destroying the bacterial cell membrane and inducing the generation of reactive oxygen species. The Ag⁺ ion release of rGO-MoS₂-Ag was delayed, endowing the nanocomposite with long-term antibacterial capabilities and better biosafety. Our results indicate that the as-prepared rGO-MoS₂-Ag has promising potential for application in biomedicine and public health.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Reduced graphene oxide-wrapped silver nanoparticles for applications in ultrasensitive colorimetric detection of Cr(vi) ions and the carbaryl pesticide

The Ag@rGO nanohybrid can be used as a colorimetric sensing platform for ultrasensitive detection of Cr(vi) ions and the carbaryl pesticide.

Graphene-based nanocomposites for sensitivity enhancement of surface plasmon resonance sensor for biological and chemical sensing: A review

Surface plasmon resonance (SPR) offers exceptional advantages such as label-free, in-situ and real-time measurement ability that facilitates the study of molecular or chemical binding events. Besides, SPR lacks in the detection of various binding events, particularly involving low molecular weight molecules. This drawback ultimately resulted in the development of several sensitivity enhancement methodologies and their application in the various area. Among graphene materials, graphene-based nanocomposites stands out owing to its significant properties such as strong adsorption of molecules, signal amplification by optical, high carrier mobility, electronic bridging, ease of fabrication and therefore, have established as an important sensitivity enhancement substrate for SPR. Also, graphene-based nanocomposites could amplify the signal generated by plasmon material and increase the sensitivity of molecular detection up to femto to atto molar level. This review focuses on the current important developments made in the potential research avenue of SPR and fiber optics based SPR for chemical and biological sensing. Latest trends and challenges in engineering and applications of graphene-based nanocomposites enhanced sensors for detecting minute and low concentration biological and chemical analytes are reviewed comprehensively. This review may aid in futuristic designing approaches and application of grapheneous sensor platforms for sensitive plasmonic nano-sensors.

A high-performance fluorescent probe for dopamine detection based on g-C3N4 nanofibers

A novel fluorescent sensor based on g-C₃N₄ nanofibers for the sensitive detection of dopamine (DA) has been proposed. We synthesized g-C₃N₄ nanofibers by directly hydrolyzing bulk g-C₃N₄ in the alkaline atmosphere (3 M NaOH). The obtained ultrathin g-C₃N₄ nanofibers were verified by characterizations of Transmission electronic microscope (TEM), X-ray diffractometer (XRD), Fourier transformation-infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). It was found that the fluorescence intensity of g-C₃N₄ nanofibers was obviously quenched by DA. Fluorescence resonance energy transfer (FRET) between DA and g-C₃N₄ nanofibers led to the fluorescence reduction of g-C₃N₄ nanofibers. The fluorescent probe based on g-C₃N₄ nanofibers exhibits linear responses to the concentration of DA in the range from 0 to 4 μM and 4 to 20 μM, the limit of detection is 17 nM. The fluorescent probe shows excellent stability, good selectivity with its application in serums.

In Situ Synthesis of Silver Nanospheres, Nanocubes, and Nanowires over Boron-Doped Graphene Sheets for Surface-Enhanced Raman Scattering Application and Enzyme-Free Detection of Hydrogen Peroxide

An effective in situ synthesis strategy is demonstrated for the preparation of silver nanostructures (nanospheres (NSs), nanocubes (NCs), and nanowires (NWs)) on the surface of boron-doped graphene (BG). Further, these functional nanomaterials are employed for the surface-enhanced Raman scattering (SERS) and non-enzymatic electrochemical detection of H₂O₂. The results confirm the superior performance of BG-Ag nanostructures as SERS platform. Among various geometries of silver nanoparticles studied in this work, we find that the AgNCs over BG (BG-AgNC) present outstanding SERS performance for detecting 4-mercaptobenzoic acid, with a limit of detection of 1.0 × 10^-13 M. Furthermore, BG-AgNC exhibits excellent capability to detect melamine as low as 1.0 × 10^-9 M. Electrochemical results confirm that the BG-AgNW-based platform exhibits a superior biosensing performance toward H₂O₂ detection. The enhanced performance is due to the presence of graphene, which improves the conductivity and provides more active sites. The synthesis of doped graphene with metallic nanoparticles described in this work is expected to be a key strategy for the development of an efficient SERS and electrochemical sensor that offers simplicity, cost-effectiveness, long-term stability, and better reproducibility.

Advancement of Ag-Graphene Based Nanocomposites: An Overview of Synthesis and Its Applications

Graphene has been employed as an excellent support for metal nanomaterials because of its unique structural and physicochemical properties. Silver nanoparticles (AgNPs) with exceptional properties have received considerable attention in various fields; however, particle aggregation limits its application. Therefore, the combination of AgNPs and graphene based nanocomposites (Ag-graphene based nanocomposites) has been widely explored to improve their properties and applications. Excitingly, enhanced antimicrobial, catalytic, and surface enhanced Raman scattering properties are obtained after their combination. In order to have a comprehensive knowledge of these nanocomposites, this Review highlights the chemical and biological synthesis of Ag-graphene nanocomposites. In particular, their applications as antimicrobial agents, catalysts, and sensors in biomedicine, agricultural protection, and environmental remediation and detection are covered. Meanwhile, the factors that influence the synthesis and applications are also briefly discussed. Furthermore, several important issues on the challenges and new directions are also provided for further development of these nanocomposites.

Calixarene Assisted Rapid Synthesis of Silver-Graphene Nanocomposites with Enhanced Antibacterial Activity

Demonstrated herein is a single rapid approach employed for synthesis of Ag-graphene nanocomposites, with excellent antibacterial properties and low cytotoxicity, by utilizing a continuous hydrothermal flow synthesis (CHFS) process in combination with p-hexasulfonic acid calix[6]arene (SCX6) as an effective particle stabilizer. The nanocomposites showed high activity against E. coli (Gram-negative) and S. aureus (Gram-positive) bacteria. The materials were characterized using a range of techniques including transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV-vis spectrophotometry, FT-IR, and X-ray powder diffraction (XRD). This rapid, single step synthetic approach not only provides a facile means of enabling and controlling graphene reduction (under alkaline conditions) but also offers an optimal route for homogeneously producing and depositing highly crystalline Ag nanostructures into reduced graphene oxide substrate.

Fluorescent biosensors enabled by graphene and graphene oxide

During the past few years, graphene and graphene oxide (GO) have attracted numerous attentions for the potential applications in various fields from energy technology, biosensing to biomedical diagnosis and therapy due to their various functionalization, high volume surface ratio, unique physical and electrical properties. Among which, graphene and graphene oxide based fluorescent biosensors enabled by their fluorescence-quenching properties have attracted great interests. The fluorescence of fluorophore or dye labeled on probes (such as molecular beacon, aptamer, DNAzymes and so on) was quenched after adsorbed on to the surface of graphene. While in the present of the targets, due to the strong interactions between probes and targets, the probes were detached from the surface of graphene, generating dramatic fluorescence, which could be used as signals for detection of the targets. This strategy was simple and economy, together with great programmable abilities of probes; we could realize detection of different kinds of species. In this review, we first briefly introduced the history of graphene and graphene oxide, and then summarized the fluorescent biosensors enabled by graphene and GO, with a detailed account of the design mechanism and comparison with other nanomaterials (e.g. carbon nanotubes and gold nanoparticles). Following that, different sensing platforms for detection of DNAs, ions, biomolecules and pathogens or cells as well as the cytotoxicity issue of graphene and GO based in vivo biosensing were further discussed. We hope that this review would do some help to researchers who are interested in graphene related biosening research work.

A Simplified and Turn-on Fluorescence Chemosensor Based on Coumarin Derivative for Detection of Aluminium(III) Ion in Pure Aqueous Solution

A novel chemosensor L based on coumarin Schiff-base was synthesized and investigated. Sensor L showed remarkable selectivity for Al(3+) in Tris-HCl aqueous buffer solution (pH 7.2), and the selectivity was not affected by the presence of a large excess of other competitive ions. The sensor responded rapidly to Al(3+) in aqueous solutions with a 2:1 stoichiometry. Meanwhile, it indicated significant improvement of quantum efficiency and ideal fluorescent lifetime.

Two Schiff-base fluorescent sensors for selective sensing of aluminum (III): Experimental and computational studies

Two Schiff-base fluorescent sensors have been synthesized, which both can act as fluorescent probes for Al(3+), upon addition of Al(3+), they exhibit a large fluorescence enhancement which might be attributed to the formation of 1:1 ligand-Al complexes which inhibit photoinduced electron transfer (PET) progress, and that the proposed binding modes of the sensors and Al(3+) are identified by theoretical calculations.

A novel sensitive and selective electrochemical sensor based on molecularly imprinted polymer on a nanoporous gold leaf modified electrode for warfarin sodium determination

A novel electrochemical sensor was facilely fabricated by coupling nanoporous gold leaf (NPGL) with molecularly imprinted polymer (MIP), and afforded ultrasensitive and selective determination of warfarin sodium (WFS).

Polypyrrole-coated flower-like Pd nanoparticles (Pd NPs@PPy) with enhanced stability and heat conversion efficiency for cancer photothermal therapy

Novel kind of polypyrrole-coated flower-like Pd nanoparticles (Pd NPs@PPy) was synthesized to show a photothermal conversion efficiency (η) of 96.0% at 808 nm.

Application of three-dimensional reduced graphene oxide-gold composite modified electrode for direct electrochemistry and electrocatalysis of myoglobin

In this paper a three-dimensional (3D) reduced graphene oxide (RGO) and gold (Au) composite was synthesized by electrodeposition and used for the electrode modification with carbon ionic liquid electrode (CILE) as the substrate electrode. Myoglobin (Mb) was further immobilized on the surface of 3D RGO-Au/CILE to obtain an electrochemical sensing platform. Direct electrochemistry of Mb on the modified electrode was investigated with a pair of well-defined redox waves appeared on cyclic voltammogram, indicating the realization of direct electron transfer of Mb with the modified electrode. The results can be ascribed to the presence of highly conductive 3D RGO-Au composite on the electrode surface that accelerate the electron transfer rate between the electroactive center of Mb and the electrode. The Mb modified electrode showed excellent electrocatalytic activity to the reduction of trichloroacetic acid in the concentration range from 0.2 to 36.0 mmol/L with the detection limit of 0.06 mmol/L (3σ).

Facile synthesis of graphene oxide-silver nanocomposite and its modified electrode for enhanced electrochemical detection of nitrite ions

In this report, silver nanoparticles (Ag NPs) were successfully deposited on graphene oxide (GO) sheets to form GO-Ag nanocomposite using garlic extract and sunlight and the nanocomposite modified glassy carbon (GC) electrode was applied as an electrochemical sensor for the detection of nitrite ions. The formation of GO-Ag nanocomposite was confirmed by using UV-visible absorption spectroscopy, TEM, XRD and FTIR spectroscopy analyses. Further, TEM pictures showed a uniform distribution Ag on GO sheets with an average size of 19 nm. The nanocomposite modified electrode produced synergistic catalytic current in nitrite oxidation with a negative shift in overpotential. The limit of detection (LOD) values were found as 2.1 µM and 37 nM, respectively using linear sweep voltammetry (LSV) and amperometric i-t curve techniques. The proposed sensor was stable, reproducible, sensitive and selective toward the detection nitrite and could be applied for the detection of nitrite in real water sample.

A water-soluble pH fluorescence probe based on quaternary ammonium salt for bioanalytical applications

A novel fluorescence probe Rhodamine-Ethanediamine-Iodomethane (REI) was successfully prepared to serve as an efficient sensing platform for H(+) with fully reversibility mainly between the pH 4.2 and 7.2 in simple buffer solution. The introduction of quaternary ammonium salt with positive charge can not only manage to increase the solubility and sensitivity of probe REI, but also avoid the "alkalizing effect" due to charge-induced effect compared to the reference probe Rhodamine-Ethanediamine (RE). In particular, probe REI was well used for monitoring the weak acid pH fluctuations in lysosome of the live HeLa cells due to its excellent biological properties, including low cytotoxicity, high selectivity, good sensitivity and membrane permeability.

Green synthesis of multifunctional carbon dots from coriander leaves and their potential application as antioxidants, sensors and bioimaging agents

In the present study, a facile one-step hydrothermal treatment of coriander leaves for preparing carbon dots (CDs) has been reported. Optical and structural properties of the CDs have been extensively studied by UV-visible and fluorescence spectroscopic, microscopic (transmission electron microscopy, scanning electron microscopy) and X-ray diffraction techniques. Surface functionality and composition of the CDs have been illustrated by elemental analysis and Fourier transform infrared spectroscopy (FTIR). Quenching of the fluorescence of the CDs in the presence of metal ions is of prime significance, hence CDs have been used as a fluorescence probe for sensitive and selective detection of Fe(3+) ions. Eventually, biocompatibility and bioimaging aspects of CDs have been evaluated on lung normal (L-132) and cancer (A549) cell lines. Qualitative analysis of cellular uptake of CDs has been pursued through fluorescence microscopy, while quantitative analysis using a flow cytometer provided an insight into the concentration and cell-type dependent uptake of CDs. The article further investigates the antioxidant activity of CDs. Therefore, we have validated the practicality of CDs obtained from a herbal carbon source for versatile applications.

Masking agent-free and channel-switch-mode simultaneous sensing of Fe(3+) and Hg(2+) using dual-excitation graphene quantum dots

A novel channel-switch-mode strategy for simultaneous sensing of Fe(3+) and Hg(2+) is developed with dual-excitation single-emission graphene quantum dots (GQDs). By utilizing the dual-channel fluorescence response performance of GQDs, this strategy achieved a facile, low-cost, masking agent-free, quantitative and selective dual-ion assay even in mixed ion samples and practical water samples.

Optical sensor: a promising strategy for environmental and biomedical monitoring of ionic species

In this review, we cover the recent developments in fluorogenic and chromogenic sensors for Cu²⁺, Fe²⁺/Fe³⁺, Zn²⁺and Hg²⁺.