Electronic Properties and Electrocatalytic Water Splitting Activity for Precious-Metal-Adsorbed Silicene with Nonmetal Doping

Since nonmetal (NM)-doped two-dimensional (2D) materials can effectively modulate their physical properties and chemical activities, they have received a lot of attention from researchers. Therefore, the stability, electronic properties, and electrocatalytic water splitting activity of precious-metal (PM)-adsorbed silicene doped with two NM atoms are investigated based on density functional theory (DFT) in this paper. The results show that NM doping can effectively improve the stability of PM-adsorbed silicene and exhibit rich electronic properties. Meanwhile, by comparing the free energies of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) intermediates of 15 more stable NM-doped systems, it can be concluded that the electrocatalytic water splitting activity of the NM-doped systems is more influenced by the temperature. Moreover, the Si-S2-Ir-doped system exhibits good HER performance when the temperature is 300 K, while the Si-N2-Pt-doped system shows excellent OER activity. Our theoretical study shows that NM doping can effectively promote the stability and electrocatalytic water splitting of PM-adsorbed silicene, which can help in the application of silicene in electrocatalytic water splitting.

Investigation of Interaction of Noble Metals (Cu, Ag, Au, Pt and Ir) with Nanosheets

Two-dimensional nanomaterials, such as graphene and hexagonal boron nitride nanosheets, have attracted tremendous interest in the research community and as a starting point for the development of nanotechnology. Using classical applied mathematical modeling, we derive explicit analytical expressions to determine the binding energies of noble metals, including copper, silver, gold, platinum and iridium (Cu, Ag, Au, Pt and Ir) atoms, on graphene and hexagonal boron nitride nanosheets. We adopt the 6-12 Lennard-Jones potential function, together with the continuous approach, to determine the preferred minimum energy position of an offset metal atom above the surface of the graphene and hexagonal boron nitride nanosheets. The main results of this study are analytical expressions of the interaction energies, which we then utilize to report the mechanism of adsorption of the metal atoms on graphene and hexagonal boron nitride surfaces. The results show that the minimum binding energy occured when Cu, Ag, Au, Pt and Ir were set at perpendicular distances in the region from 3.302 Å to 3.683 Å above the nanosheet surface, which correspond to adsorption energies in the region ranging from 0.842 to 2.978 (kcal/mol). Our results might assist in providing information on the interaction energies between the metal atoms and the two-dimensional nanomaterials.

Low-Temperature Synthesis of Single Palladium Atoms Supported on Defective Hexagonal Boron Nitride Nanosheet for Chemoselective Hydrogenation of Cinnamaldehyde

Metal-support interactions are of great importance in determining the support-activity in heterogeneous catalysis. Here we report a low-temperature synthetic strategy to create atomically dispersed palladium atoms anchored on defective hexagonal boron nitride (h-BN) nanosheet. Density functional theory (DFT) calculations suggest that the nitrogen-containing B vacancy can provide stable anchoring sites for palladium atoms. The presence of single palladium atoms was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. This catalyst showed exceptional efficiency in chemoselective hydrogenation of cinnamaldehyde, along with excellent recyclability, sintering-resistant ability, and scalability. We anticipate this synthetic approach for the synthesis of high-quality SACs based on h-BN support is amenable to large-scale production of bench-stable catalysts with maximum atom efficiency for industrial applications.

Syngas molecules as probes for defects in 2D hexagonal boron nitride: their adsorption and vibrations

Single-layer, defect-laden hexagonal boron nitride (dh-BN) is attracting a great deal of attention for its diverse applications: catalysis on the one hand, and single photon emission on the other. As possible probes for identifying some common defects in single-layer h-BN, we present results of ab initio calculations for the adsorption and vibrational characteristics of syngas molecules (H₂, CO, CO₂) on dh-BN containing one of four types of defects: nitrogen vacancy (V_N), boron vacancy (V_B), Stone-Wales defect (SW), and nitrogen substituted by boron (B_N). Through a comparative examination of adsorption features, charge transfer, electronic structure, and vibrational spectrum, we obtain a deep understanding of the interaction of these molecules with dh-BN and the role of the defect states. We find that while CO, CO₂ and atomic hydrogen chemisorb, molecular H₂ physisorbs on dh-BN with the four considered defect types. V_N and V_B show strong affinity for CO and CO₂ since the defect states induced by them lie close to the Fermi level. SW does not favor adsorption of these small molecules, as the process for each is endothermic. In the case of B_N, CO adsorbs strongly but CO₂ only weakly. Vibrational frequencies of notable modes localized at the adsorbed molecules are analyzed and suggested as measures for identification of the defect type. Through a simple comparison of adsorption characteristics of the molecules on these defects, we propose dh-BN with V_N to be a good catalyst candidate for CO₂ hydrogenation.

Graphene-supported single-atom catalysts and applications in electrocatalysis

Supported metal nanostructures are the most extensively studied heterogeneous catalysts, benefiting from easy separation, regeneration and affordable cost. The size of the supported metal species is one of the decisive factors in determining the activity of heterogeneous catalysts. Particularly, the unsaturated coordination environment of metal atoms preferably act as the active centers, minimizing these metal species can significantly boost the specific activity of every single metal atom. Single-atom catalysts/catalysis (SACs), containing isolated metals atomically dispersed on or coordinated with the surface of a support material, represent the ultimate utilization of supported metals and maximize metal usage efficiency. Graphene, a two-dimensional star material, exhibiting extraordinary physical and chemical properties, has been approved as an excellent platform for constructing SACs. When atomically dispersed metal atoms are strongly anchored on the graphene surface, featuring ultra-high surface area and excellent electronic properties, SACs offer a great potential to significantly innovate the conventional heterogeneous catalysis, especially in the field of electrocatalysis. In this review, a detailed discussion of graphene-supported SACs, including preparation approaches, characterization techniques and applications on typical electrocatalytic reactions is provided. The advantages and unique features of graphene-supported SACs as efficient electrocatalysts and the upcoming challenges for improving their performance and further practical applications are also highlighted.

Theoretical study of two-dimensional bis(iminothiolato)metal monolayers as promising electrocatalysts for carbon dioxide reduction

MnIT is a good CO₂RR catalyst for HCOOH production and CO poisoning is prohibited.

First-Principles Investigations of Single Metal Atoms (Sc, Ti, V, Cr, Mn, and Ni) Embedded in Hexagonal Boron Nitride Nanosheets for the Catalysis of CO Oxidation

We evaluated isolated transition metal atoms (Sc, Ti, V, Cr, Mn, and Ni) embedded in hexagonal-BN as novel single atom catalysts for CO oxidation. We predicted that embedded Ni atoms should have superior performance for this task. Ti, V, and Mn bind CO2 too strongly and so the reaction will not proceed smoothly. We studied the detailed reaction processes for Sc, Cr, and Ni. The Langmuir–Hinshelwood (LH), Eley–Rideal (ER), and the new termolecular Eley–Rideal (TER) processes for CO oxidation were investigated. Sc was not effective. Cr primarily used the ER process, although the barrier was relatively large at 1.30 eV. Ni was the best of the group, with a 0.44 eV barrier for LH, and a 0.47 eV barrier for TER. Therefore, we predicted that the LH and TER processes could operate at relatively low temperatures between 300 and 500 K.

Theoretical investigation of oxidation of NO (NO + ½ O2 → NO2) on surfaces of nickel-doped nanocages (Ni-C60 and Ni-B30N30)

In present study, the NO oxidation on Ni-carbon nanocage and Ni-boron nitride nanocage surfaces was investigated. The Ni-C₆₀ and Ni-B₃₀N₃₀ catalysts can oxidize the NO molecule by Langmuir-Hinshelwood (LH) and Eley-Rideal (ER) mechanisms. In this study, the NO molecule was joined to Ni atom of the Ni-surface-O₂* and Ni-surface-O* to generate the intermediates with low barrier energies. It can be concluded that the cis-Ni-surface-ONOO* complex in the ER pathway is more stable than four-elements-ring complex in LH pathway ca 0.06 and 0.08 eV, respectively. In the LH pathway, the studied catalysts were deactivated by irreversible absorption of NO₂ molecules in Ni atoms of Ni-C₆₀ and Ni-B₃₀N₃₀. In contrast, in the ER pathway two NO₂ molecules were released in the normal temperature. In this study, the abilities of the Ni-C₆₀ and Ni-B₃₀N₃₀ to oxidation of NO molecule was demonstrated. Finally, the systematic scheme to design of metal-doped nano-catalysts to oxidation of toxic gases was proposed.

Single Pt atom supported on penta-graphene as an efficient catalyst for CO oxidation

We performed a systematic study of CO oxidation on a single Pt atom supported on penta-graphene (Pt/PG) by utilizing spin-polarized first-principles calculations. The results manifested that Pt/PG, as a single-atom catalyst, exhibited excellent catalytic activity toward CO oxidation and provided a novel strategy for the design of single-atom catalysts based on penta-graphene.

Taming interfacial electronic properties of platinum nanoparticles on vacancy-abundant boron nitride nanosheets for enhanced catalysis

Taming interfacial electronic effects on Pt nanoparticles modulated by their concomitants has emerged as an intriguing approach to optimize Pt catalytic performance. Here, we report Pt nanoparticles assembled on vacancy-abundant hexagonal boron nitride nanosheets and their use as a model catalyst to embrace an interfacial electronic effect on Pt induced by the nanosheets with N-vacancies and B-vacancies for superior CO oxidation catalysis. Experimental results indicate that strong interaction exists between Pt and the vacancies. Bader charge analysis shows that with Pt on B-vacancies, the nanosheets serve as a Lewis acid to accept electrons from Pt, and on the contrary, when Pt sits on N-vacancies, the nanosheets act as a Lewis base for donating electrons to Pt. The overall-electronic effect demonstrates an electron-rich feature of Pt after assembling on hexagonal boron nitride nanosheets. Such an interfacial electronic effect makes Pt favour the adsorption of O2, alleviating CO poisoning and promoting the catalysis.

Identification of activity trends for CO oxidation on supported transition-metal single-atom catalysts

Identification of activity trends for CO oxidation on transition-metal single-atom catalysts by using E_ad(CO) and E_ad(O₂) as descriptors.

Mechanistic study of NO oxidation on Cr–phthalocyanine: theoretical insight

A mechanistic investigation by DFT reveals that Cr–phthalocyanine is a promising catalyst for NO oxidation at low temperatures.

A promising single atom catalyst for CO oxidation: Ag on boron vacancies of h-BN sheets

Due to “CO-Promoted O₂ Activation”, the termolecular Eley–Rideal (TER) mechanism is the most relevant one for CO oxidation over the SAC, Ag₁/BN.

CO oxidation catalyzed by the single Co atom embedded hexagonal boron nitride nanosheet: a DFT-D study

A single metal atom stabilized on two dimensional materials (such as graphene and h-BN) exhibits extraordinary activity in the oxidation of CO.

A novel Pd3O9@α-Al2O3 catalyst under a hydroxylated effect: high activity in the CO oxidation reaction

Considering the importance of palladium-based and doped metal-oxide catalysts in CO oxidation, we design a new Pd3O9@α-Al2O3 catalyst and simulate its efficiency under a hydroxylated effect. The structure, electronic structure and oxidation activity of the hydroxylated Pd3O9@α-Al2O3(0001) surface are investigated by density functional theory. Under the O-rich growth conditions, Pd preferentially replaces Al. The lowest formation energy of the Pd-doped α-Al2O3(0001) surface is 0.21 eV under conditions wherein the coverage of the Pd-doped α-Al2O3 is 0.75 on a pre-hydroxylated surface and the water coverage is 0.25, which leads to formation of a Pd3O9 cluster embedded in the Al2O3(0001) surface. The reaction mechanisms of CO oxidization have been elucidated first by CO adsorption and migration, second by O(v) formation with the first CO2 release, then by the first foreign O2 filling and CO co-adsorption, and finally by the second CO2 desorption and restoration of the hydroxylated Pd3O9@α-Al2O3(0001) surface. The rate-determining step is the formation of the first CO2 in the whole catalytic cycle. The results also indicate that the energy barrier for CO oxidization is obviously reduced compared to that of the undoped surface, which implies that the introduction of Pd can efficiently improve the oxidation reactivity of the α-Al2O3(0001) surface. Compared to the synthesized Ir1/FeO(x) (1.41 eV) and Pt1/FeO(x) (0.79 eV) catalysts, the reaction activation barrier of CO oxidation is lowered by 0.65 eV and 0.03 eV, respectively. Therefore, the Pd3O9@α-Al2O3 catalyst shows superior catalytic activity in CO oxidation. The present results enrich the understanding of the catalytic oxidation of CO by palladium-based catalysts and provide a clue for fabricating palladium-based catalysts with low cost and high activity.

Unique Reactivity of Transition Metal Atoms Embedded in Graphene to CO, NO, O₂ and O Adsorption: A First-Principles Investigation

Taking the adsorption of CO, NO, O₂ and O as probes, we investigated the electronic structure of transition metal atoms (TM, TM = Fe, Co, Ni, Cu and Zn) embedded in graphene by first-principles-based calculations. We showed that these TM atoms can be effectively stabilized on monovacancy defects on graphene by forming plausible interactions with the C atoms associated with dangling bonds. These interactions not only give rise to high energy barriers for the diffusion and aggregation of the embedded TM atoms to withstand the interference of reaction environments, but also shift the energy levels of TM-d states and regulate the reactivity of the embedded TM atoms. The adsorption of CO, NO, O₂ and O correlates well with the weight averaged energy level of TM-d states, showing the crucial role of interfacial TM-C interactions on manipulating the reactivity of embedded TM atoms. These findings pave the way for the developments of effective monodispersed atomic TM composites with high stability and desired performance for gas sensing and catalytic applications.

Pd1/BN as a promising single atom catalyst of CO oxidation: a dispersion-corrected density functional theory study

Single metal atom catalysts exhibit extraordinary activity in a large number of reactions, and some two-dimensional materials (such as graphene and h-BN) are found to be prominent supports to stabilize single metal atoms.