Water bridges as the trigger in an amino functionalized Zn-MOF for highly selective and sensitive fluorescent sensing of water

Water is a fundamental element for life. The highly selective and sensitive sensing of water is always attractive for mankind in activities such as physiological processes study and extraterrestrial life exploration. Fluorescent MOFs with precise channels and functional groups might specifically recognize water molecules with hydrogen-bond interaction or coordination effects and work as water sensors. As a proof of concept, herein, an amino functionalized Zn-MOF (named as complex 1) with pores that just right for water molecules to form hydrogen bond bridges is revealed for highly selective and sensitive fluorescent sensing of water. The single-crystal X-ray diffraction analysis indicates that the 3D framework of complex 1 is functionalized with free amino groups in the channels. Hydrogen bonds formed in the channel along b-axis as water bridges to connect two adjacent NH2bdc ligands and result in the restriction of intramolecular motions (RIM) which could responsible for the selective turn-on fluorescence response to water. Complex 1 exhibits high sensitive to trace amount of water in organic solvents and could be used for water detection in a wide range water contents. Take advantages of complex 1, portable sensors (complex 1@PMMA) were prepared and used in the highly sensitive water sensing.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Two-Stage Three-Dimensional Luminescent Sensing Strategy for Precisely Detecting a Wide Range of Water Content in Tetrahydrofuran

The development of efficient sensors for detecting water content in organic solvents is highly desirable for various cases in the chemical industry. Relevant sensors based on luminescent materials are promising due to their superior sensitivity and visualization. However, reported luminescent probes are either aggregation-caused quenching-type molecules, which present an emission quenching effect in high water content, or aggregation induced emission-type luminogens, which exhibit weak emission in organic solvents. This factor narrows the targeted water-content sensing range. Herein, we developed a series of indoline-based donor-acceptor-donor luminogens involving twist intramolecular charge transfer and an aggregation-induced emission effect, which exhibited a unique "on-off-on" emission behavior in tetrahydrofuran with the continuous increase of water content from 0% to 99%. Simultaneously, the emission wavelength underwent a process of first red-shift and then blue-shift. Three-dimensional working curves based upon the log value of wavelength and emission intensity ratio versus water content in tetrahydrofuran were established with two-stage characteristics, aiming to visually detect a wide range of water content in organic solvents. Such a sensing method offers extra sensitivity, convenience, and accuracy.

Tetraphenylethene–anthracene-based fluorescence emission sensor for detection of water with photo-induced electron transfer and aggregation-induced emission characteristics

As a fluorescent sensor for water over a wide range from low to high water content regions in organic solvents, we have designed and developed a PET (photo-induced electron transfer)/AIE...

Ppb-Level, Dual Channel Sensing of Cyanide and Bisulfate Ions in Aqueous Medium: Computational Rationalization of Ion-Dependent ICT Mechanism

In this report, three oxidized diindolylarylmethane (DIAM) based chromogenic probes (designated as 1, 2, and 3) have been developed for the simultaneous and dual-channel detection of cyanide (LOD: 6.2 ppb)...

Fluorescent polymer films based on photo-induced electron transfer for visualizing water

As fluorescent materials for visualization, detection, and quantification of a trace amount of water, we have designed and developed a PET (photo-induced electron transfer)-type fluorescent monomer SM-2 composed of methyl methacrylate-substituted anthracene fluorophore-(aminomethyl)-4-cyanophenylboronic acid pinacol ester (AminoMeCNPhenylBPin) and achieved preparation of a copolymer poly(SM-2-co-MMA) composed of SM-2 and methyl methacrylate (MMA). Both SM-2 and poly(SM-2-co-MMA) exhibited enhancement of the fluorescence emission with the increase in water content in various solvents (less polar, polar, protic, and aprotic solvents) due to the formation of the PET inactive (fluorescent) species SM-2a and poly(SM-2-co-MMA)a, respectively, by the interaction with water molecules. The detection limit (DL) of poly(SM-2-co-MMA) for water in the low water content region below 1.0 wt% in acetonitrile was 0.066 wt%, indicating that poly(SM-2-co-MMA) can act as a PET-type fluorescent polymeric sensor for a trace amount of water in solvents, although it was inferior to that (0.009 wt%) of SM-2. It was found that spin-coated poly(SM-2-co-MMA) films as well as 15 wt% SM-2-doped polymethyl methacrylate (PMMA) films produced a satisfactory reversible fluorescence off–on switching between the PET active state under a drying process and the PET inactive state upon exposure to moisture, which is demonstrated by the fact that the both the films are similar in hydrophilicity to each other from the measurement of the water contact angles on the polymer film surface. Herein we propose that PET-type fluorescent polymer films based on a fluorescence enhancement system are one of the most promising and convenient functional dye materials for visualizing moisture and water droplets.

Photo-induced electron transfer (PET)-type fluorescent polymer films based on a fluorescence enhancement system have been prepared as one of the most promising and convenient functional dye materials for visualizing moisture and water droplets.

Trace-Level Humidity Sensing from Commercial Organic Solvents and Food Products by an AIE/ESIPT-Triggered Piezochromic Luminogen and ppb-Level "OFF-ON-OFF" Sensing of Cu2+: A Combined Experimental and Theoretical Outcome

Selective and sensitive moisture sensors have attracted immense attention due to their ability to monitor the humidity content in industrial solvents, food products, etc., for regulating industrial safety management. Herein, a hydroxy naphthaldehyde-based piezochromic luminogen, namely, 1-{[(2-hydroxyphenyl)imino]methyl}naphthalen-2-ol (NAP-1), has been synthesized and its photophysical and molecular sensing properties have been investigated by means of various spectroscopic tools. Owing to the synergistic effect of both aggregation-induced emission (AIE) and excited-state intramolecular proton transfer (ESIPT) along with the restriction of C=N isomerization, the probe shows bright yellowish-green-colored keto emission with high quantum yield after the interaction with a trace amount of water. This makes NAP-1 a potential sensor for monitoring water content in the industrial solvents with very low detection limits of 0.033, 0.032, 0.034, and 0.033% (v/v) from tetrahydrofuran (THF), acetone, dimethyl sulfoxide (DMSO), and methanol, respectively. The probe could be used in the food industry to detect trace moisture in the raw food samples. The reversible switching behavior of NAP-1 makes it suitable for designing an INHIBIT logic gate with an additional application in inkless writing. In addition, an Internet of Things-(IoT) based prototype device has been proposed for on-site monitoring of the moisture content by a smartphone via Bluetooth or Wi-Fi. The aggregated probe also has the ability to recognize Cu²⁺ from a purely aqueous medium via the chelation-enhanced quenching (CHEQ) mechanism, leading to ∼84% fluorescence quenching with a Stern-Volmer quenching constant of 1.46 × 10⁴ M^-1 and with an appreciably low detection threshold of 57.2 ppb, far below than recommended by the World Health Organization (WHO) and the United States Environmental Protection Agency (U.S. EPA). The spectroscopic and theoretical calculations (density functional theory (DFT), time-dependent DFT (TD-DFT), and natural bond orbital (NBO) analysis) further empower the understanding of the mechanistic course of the interaction of the host-guest recognition event.

Polymer films doped with fluorescent sensor for moisture and water droplet based on photo-induced electron transfer

Anthracene-(aminomethyl)phenylboronic acid pinacol ester (AminoMePhenylBPin) OF-2 acts as a PET (photo-induced electron transfer)-type fluorescent sensor for determination of a trace amount of water: the addition of water to organic solvents containing OF-2 causes a drastic and linear enhancement of fluorescence emission as a function of water content, which is attributed to the suppression of PET. Indeed, detection limits (DLs) for OF-2 were as low as 0.01–0.008 wt% of water in solvents, that is, the PET method makes it possible to visualize, detect, and determine a trace amount of water. Thus, in this work, in order to develop fluorescent polymeric materials for visualization and detection of water, we have achieved the preparation of various types of polymer films (polystyrene (PS), poly(4-vinylphenol) (PVP), polyvinyl alcohol (PVA), and polyethylene glycol (PEG)) which were doped with OF-2, and investigated the optical sensing properties of the OF-2-doped polymer films for water. As-prepared OF-2-doped polymer films initially exhibited green excimer emission in the PET active state, but blue monomer emission in the PET inactive state upon exposure to moisture or by water droplet. Moreover, it was found that the OF-2-doped polymer films show the reversible fluorescence properties in the dry–wet process. Herein we propose that polymer films doped with PET-type fluorescent sensors for water based on a fluorescence enhancement (turn-on) system are one of the most promising and convenient functional materials for visualizing moisture and water droplets.

Polymer films doped with a photo-induced electron transfer (PET)-type fluorescent sensor exhibit green excimer emission in the PET active state, but blue monomer emission in the PET inactive state upon exposure to moisture.

A sensitive and selective BINOL based ratiometric fluorescence sensor for the detection of cyanide ions

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻). The optical study revealed that BBCN exhibited unique spectral changes only with cyanide ions in the presence of other competing ions. Besides, an apparent fluorescent colour change from green to blue was observed. A clear linear relationship was observed between the fluorescence ratiometric ratio of BBCN and the concentration of CN⁻ with a reasonably low detection limit (LOD) of 189 nM (507 ppb). The optical response was due to the nucleophilic addition of CN⁻ to the dicyanovinyl group of the sensor, which compromises the probe's intramolecular charge transfer. This mechanism was well confirmed by Job's plot, ¹H-NMR and ESI-MS studies. BBCN showed immediate spectral response towards (1 second) CN⁻ and detection could be realized in a broad pH window. Furthermore, the practical utility of BBCN was studied by test paper-based analysis and the detection of CN⁻ in various water resources.

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻).

Rational Design of an ICT-Based Chemodosimeter with Aggregation-Induced Emission for Colorimetric and Ratiometric Fluorescent Detection of Cyanide in a Wide pH Range

An alkoxy-substituted 1,3-indanedione-based chemodosimeter 1 with an aggregation-induced emission (AIE) characteristic was rationally designed and synthesized for the ultrasensitive and selective sensing of cyanide in a wide pH range of 3.0-12.0. The nucleophilic addition of cyanide to the β-conjugated carbon of the 1,3-indanedione group obstructs intramolecular charge transfer (ICT) and causes a significant change in the absorption and fluorescence spectra, enabling colorimetric and ratiometric fluorescent detection of cyanide in a 90% aqueous solution. The cyanide-sensing mechanism is supported by single-crystal X-ray diffraction analysis, time-dependent density functional theory (TD-DFT) calculations, and 1H NMR titration experiments. Sensor 1 exhibits strong yellow fluorescence in the solid state due to the AIE effect, and the paper probes containing 1 can be conveniently used to sense cyanide by the naked eye. Furthermore, chemodosimeter 1 was successfully used for sensing cyanide in real environmental water samples.

Fluorescence sensors for detection of water based on tetraphenylethene–anthracene possessing both solvatofluorochromic properties and aggregation-induced emission (AIE) characteristics

TPE-(An-CHO)4 has been developed as an SFC (solvatofluorochromism)/AIEE (aggregation-induced emission enhancement)-based fluorescence sensor for detection of water over a wide range from low to high water content regions in solvents.

An inquisitive fluorescence method for the real-time detection of trace moisture in polar aprotic solvents with the application of water rancidity in foodstuffs

A simple fluorometric approach to quantify atmospheric moisture incorporation in polar aprotic solvents with application for moisture sensitive oil-based foods is reported.

Application of reduced graphene oxide-based actuators for real-time chemical sensing of liquid and vapour phase contaminants

The possibility of employing responsive materials for the in situ detection of chemical contaminants in the liquid phase is demonstrated here.

Naked eye detection of moisture in organic solvents and development of alginate polymer beads and test cassettes as a portable kit

New dabsyl-thiophene based receptor DABT and its mercury complex DABT-Hg is reported as a colorimetric sensor for rapid and sensitive detection of trace amount of water in aprotic solvents. Based on intramolecular charge transfer in the excited state, the receptor dabsyl-thiophene (yellow color) binds with the mercury ions (magenta color) to stimulate a colorimetric response. The mercury complex is used as a moisture sensor in THF, acetone, and acetonitrile due to its instability in moisture containing organic solvents. The probe exhibits higher sensitivity towards water in THF (LOD = 0.0041% w/w), acetone (LOD = 0.0144% w/w) and acetonitrile (LOD = 0.1008% w/w). The dissociation of mercury from probe DABT-Hg in the presence of water is accountable for the colorimetric response as proven by the ¹H NMR and ESI-MS studies. DABT-Hg is the first mercury based complex for the detection of moisture in organic solvents. Test paper strip and PVA thin film doped with the probe were successfully used to detect moisture content in organic solvents. DABT-Hg incorporated alginate beads are prepared to determine the water content in triethylamine and ethylene glycol. Portable test cassettes are developed for the on-site detection of distilled and undistilled wet solvents in the chemical laboratory through naked-eye detection.

Deciphering the Dynamics of Organic Nanoaggregates with AIEE Effect and Excited States: Lipophilic Benzothiadiazole Derivatives as Selective Cell Imaging Probes

An aggregation-induced emission enhancement (AIEE) effect in fluorescent lipophilic 2,1,3-benzothiadiazole (BTD) derivatives and their organic nanoaggregates were studied. A set of techniques such as single-crystal X-ray, dynamic light scattering (DLS), electron paramagnetic resonance (EPR), UV-vis, fluorescence, and density functional theory (DFT) calculations have been used to decipher the formation/break (kinetics), properties, and dynamics of the organic nanoaggregates of three BTD small organic molecules. An in-depth study of the excited-state also revealed the preferential relaxation emissive pathways for the BTD derivatives and the dynamics associated with it. The results described herein, for the first time, explain the formation of fluorescent BTD nanoaggregate derivatives and allow for the understanding of their dynamics in solution as well as the ruling forces of both aggregation and break processes along with the involved equilibrium. One of the developed dyes could be used at a nanomolar concentration to selectively stain lipid droplets emitting an intense and bright fluorescence at the red channel. The other two BTDs could also stain lipid droplets at very low concentrations and were visualized preferentially at the blue channel.

Development of optical sensor for water in acetonitrile based on propeller-structured BODIPY-type pyridine-boron trifluoride complex

A propeller-structured 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex, ST-3-BF₃, which has three units of 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile at the 3-, 5-, and 8-positions on the BODIPY skeleton, was designed and developed as an intramolecular charge transfer (ICT)-type optical sensor for the detection of a trace amount of water in acetonitrile. The characterization of ST-3-BF₃ was successfully determined by FTIR, ¹H and ¹¹B NMR measurements, high-resolution mass spectrometry (HRMS) analysis, thermogravimetry-differential thermal analysis (TG-DTA), photoabsorption and fluorescence spectral measurements, and density functional theory (DFT) calculations. ST-3-BF₃ showed a broad photoabsorption band in the range of 600 to 800 nm, which is assigned to the S₀ → S₁ transition of the BODIPY skeleton with the expanded π-conjugated system over the 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile units at the 3-, 5-, and 8-positions onto the BODIPY core. In addition, a photoabsorption band was also observed in the range of 300 to 550 nm, which can be assigned to the ICT band between the 2-(pyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile units at 3-, 5-, and 8-positions and the BODIPY core. ST-3-BF₃ exhibited a characteristic fluorescence band originating from the BODIPY skeleton at around 730 nm. It was found that by addition of a trace amount of water to the acetonitrile solution of ST-3-BF₃, the photoabsorption band at around 415 nm and the fluorescence band at around 730 nm increased linearly as a function of the water content below only 0.2 wt%, which could be ascribed to the change in the ICT characteristics due to the dissociation of ST-3-BF₃ into ST-3 by water molecules. Thus, this work demonstrated that the 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex can act as a highly-sensitive optical sensor for the detection of a trace amount of water in acetonitrile.

Propeller-structured 3,5,8-trithienyl-BODIPY-type pyridine–boron trifluoride complex, ST-3-BF₃, has been developed as an intramolecular charge transfer (ICT)-type optical sensor for the detection of a trace amount of water in acetonitrile.

Supramolecular Assembly-Driven Color-Tuning and White-Light Emission Based on Crown-Ether-Functionalized Dihydrophenazine

The development of color-tunable white-light-emitting systems is significant for artificial smart materials. Recently, a set of conformational dependent fluorophores N,N'-diaryl-dihydrodibenzo[a,c]phenazines (DPACs) have been developed with unique photoluminescence mechanism vibration-induced emission (VIE). DPACs can emit intrinsical blue emission at a bent excited state and abnormal orange-red emission at a planar excited state, which are due to the varied π-conjugation via excited-state configuration transformation along the N-N' axis from bent to planar form. Herein, a novel VIE-active compound DPAC-[B15C5]₂ is designed and synthesized with two wings of benzo-15-crown-5. The excited-state vibration of the DPAC moiety can be modulated by tuning the supramolecular assembly and disassembly via chelation competition of K⁺ between 15-crown-5 and 18-crown-6, and hence, a wide-color-tuning emission is achieved from blue to orange-red including white. Dynamic light scattering and transmission electron microscopy experiments were conducted to exhibit the supramolecular assembling process. Additionally, the moisture detection in organic solvents is realized since the water could dissociate the supramolecular assembly.

A highly sensitive “ON–OFF” optical sensor for the selective detection of cyanide ions in 100% aqueous solutions based on hydrogen bonding and water assisted aggregation induced emission

Nanoparticles N,N′-(pyridine-2,6-diyl)bis(2-(2,4-dichlorophenoxy)acetamide) (1) exhibited an “on–off” emission response toward cyanide (CN⁻) ions in 100% aqueous solutions based on AIE features.

Recent Advances in Aggregation-Induced Emission Chemosensors for Anion Sensing

The discovery of the aggregation-induced emission (AIE) phenomenon in the early 2000s not only has overcome persistent challenges caused by traditional aggregation-caused quenching (ACQ), but also has brought about new opportunities for the development of useful functional molecules. Through the years, AIE luminogens (AIEgens) have been widely studied for applications in the areas of biomedical and biological sensing, chemosensing, optoelectronics, and stimuli responsive materials. Particularly in the application of chemosensing, a myriad of novel AIE-based sensors has been developed to detect different neutral molecular, cationic and anionic species, with a rapid detection time, high sensitivity and high selectivity by monitoring fluorescence changes. This review thus summarises the recent development of AIE-based chemosensors for the detection of anionic species, including halides and halide-containing anions, cyanides, and sulphur-, phosphorus- and nitrogen- containing anions, as well as a few other anionic species, such as citrate, lactate and anionic surfactants.

Colorimetric and ratiometric fluorescence sensing of water based on 9-methyl pyrido[3,4-b]indole-boron trifluoride complex

In this work, 9-methyl pyrido[3,4-b]indole-boron trifluoride complex, 9-MP-BF3, was designed and developed as a colorimetric and ratiometric fluorescent sensor for the detection of water in the low- and high-water-content regions in solvents. In the low-water-content region, a new photoabsorption band at around 360 nm and a fluorescence band at around 370 nm gradually appeared due to the dissociation of 9-MP-BF3 into 9-methyl pyrido[3,4-b]indole (9-MP) by water molecules with a simultaneous decrease in the photoabsorption band at around 390 nm and the fluorescence band at around 460 nm originating from 9-MP-BF3. In the moderate-water-content region, the photoabsorption band at around 360 nm and the fluorescence band at around 370 nm gradually shifted to a longer wavelength region with an increase in the fluorescence intensity, which could be ascribed to the formation of a hydrogen-bonded complex (9-MP-H2O) with water molecules. Furthermore, in the high-water-content region, two photoabsorption bands at around 305 nm and 390 nm and one fluorescence band at around 460 nm gradually reappeared with simultaneous decrease in the photoabsorption band at around 290 nm and the fluorescence band at around 370 nm, which was attributed to the formation of a hydrogen-bonded proton transfer complex (9-MP-H+) with water molecules. Thus, this work revealed the mechanism of a colorimetric and ratiometric fluorescent sensor based on pyrido[3,4-b]indole-boron trifluoride complex for the detection of water over a wide range from low water content to high water content in solvents.

A simple colorimetric sensor for the detection of moisture in organic solvents and building materials: applications in rewritable paper and fingerprint imaging

A simple off-the-shelf dye molecule, 1,4-dihydroxy-9,10-anthraquinone or quinizarin (1), has been investigated for the effective detection of moisture in organic solvents and building materials. Anion-induced deprotonation of 1 to 1.F followed by re-protonation with water is the working principle of the sensor system. Changes in colour, UV-Vis spectra and emission intensity indicate the moisture detection of 1.F in various organic solvents. The probe 1.F is more effective at the detection of water in acetonitrile and THF with a LOD of 0.0011 and 0.0026 wt%. Probe 1.F is reversible, reusable, highly selective, and sensitive and has a fast response time both in solution phase and in test papers. Probe 1.F is also applied for the detection of unknown moisture content in raw building materials such as cement, fly ash, foundry sand, and limestone. 1.F incorporated cellulose-based papers are applicable for inkless writing and stamping in the read-erase manner. Furthermore, these papers are also suitable for fingerprint imaging and sweat pore mapping by the simple colour change method.

Fluorescent sensor for water based on photo-induced electron transfer and Förster resonance energy transfer: anthracene-(aminomethyl)phenylboronic acid ester-BODIPY structure

An anthracene-(aminomethyl)phenylboronic acid ester-BODIPY (DJ-1) was designed and developed as a fluorescent sensor based on photo-induced electron transfer (PET) and Förster resonance energy transfer (FRET) for the detection of a trace amount of water in solvents, where the anthracene skeleton and BODIPY skeleton are the donor fluorophore and the acceptor fluorophore in the FRET process, respectively. It was found that the addition of water to organic solvents containing DJ-1 causes both the suppression of PET in the anthracene-(aminomethyl)phenylboronic acid ester as the PET-type fluorescent sensor skeleton and the energy transfer from the anthracene skeleton to the BODIPY skeleton through a FRET process, thus resulting in the enhancement of the fluorescence band originating from the BODIPY skeleton. This work demonstrates that the PET/FRET-based fluorescent dye composed of the donor fluorophore possessing PET characteristics and the acceptor fluorophore in the FRET process can act as a fluorescent sensor with a large SS for the detection of a trace amount of water in solvents.

An anthracene-(aminomethyl)phenylboronic acid ester-BODIPY (DJ-1) structure was developed as a fluorescent sensor based on photo-induced electron transfer (PET) and Förster resonance energy transfer (FRET) for detection of water in solvents.

Development of an intramolecular charge transfer-type colorimetric and fluorescence sensor for water by fusion with a juloidine structure and complexation with boron trifluoride

An intramolecular charge transfer-type optical sensor fused with a juloidine structure and complexed with boron trifluoride can detect and determine water over a wide concentration range.

Pyrazolo-fused 4-azafluorenones as key reagents for the synthesis of fluorescent dicyanovinylidene-substituted derivatives

A green method for the three-component synthesis of an indeno[1,2-b]pyrazolo[4,3-e]pyridines library under microwave irradiation and their use in the preparation of novel fluorescent dicyanovinylidene-substituted derivatives is provided.

Facile synthesis of carbon nanodots with surface state-modulated fluorescence for highly sensitive and real-time detection of water in organic solvents

In our study, the carbon nanodots (CDs) were synthesized by one-step solvothermal method using resorcinol as the only presusor. The obtained CDs contained abundant unsaturated oxygen-containing groups resulting from the surface oxidation. A novel, simple, and real-time fluorescent assay for the detection of water in various organic solvents was thus established by reducing the surface oxidation states. Excellent reversibility can be readily achieved by the external stimulus water and N,N'-dicyclohexylcarbodiimide (DCC). The water-induced sensitive (limit of detection = 0.006%, v/v, in ethanol) and ultrafast (<1 s) response in emission properties was capable of water determination in spirit samples in both solution and solid-state paper test strips.

A novel colorimetric and fluorescence turn-on pH sensor with a notably large Stokes shift for its application

A novel naked-eye colorimetric and fluorescent turn-on pH sensor based on a naphthalenone scaffold was rationally designed and facilely synthesized.

Tetraphenylethene– and diphenyldibenzofulvene–anthracene-based fluorescence sensors possessing photo-induced electron transfer and aggregation-induced emission enhancement characteristics for detection of water

RS-1 and RS-2 have been developed as PET/AIEE hybrid fluorescence sensors for detection of water in the low and high water content regions in solvents.

Self-reversible mechanochromism and aggregation induced emission in neutral triarylmethanes and their application in water sensing

Neutral triarylmethanes exhibit intramolecular exciplex formation, self-reversible mechanochromism, and aggregation induced/viscosity-dependent emission and sense water in organic solvents.

Synthesis of Dicyanovinyl-Substituted 1-(2-Pyridyl)pyrazoles: Design of a Fluorescent Chemosensor for Selective Recognition of Cyanide

A fluorescence "turn-off" probe has been designed and successfully applied to detect cyanide (CN^-) based on a Michael-type nucleophilic addition reaction and intramolecular charge transfer (ICT) mechanism. For this research, a family of 3-aryl-4-(2,2-dicyanovinyl)-1-(2-pyridinyl)pyrazoles as donor-π-acceptor (D-π-A) systems have been synthesized in 58-66% overall yield, by a three-step synthesis sequence starting from p-substituted acetophenones. The substituted p-methoxyphenyl showed good fluorescence emission and large Stokes shifts in different solvents due to its greater ICT. Likewise, this probe evidenced high selectivity and sensitivity and fast recognition for CN^- with a detection limit of 6.8 μM. HRMS analysis, ¹H NMR titration experiments, and TD-DFT calculations were performed to confirm the mechanism of detection and fluorescence properties of the chemodosimeter of CN^-. Additionally, fluorescent test paper was conveniently used to detect cyanide in aqueous solution.

7-Dialkylaminocoumarin Oximates: Small Molecule Fluorescent "Turn-On" Chemosensors for Low-Level Water Content in Aprotic Organic Solvents

The water sensing properties of two efficient two-component fluorescent “turn-on” chemo-sensors based on the 7-dialkylaminocoumarin oxime acid-base equilibrium were investigated. Interestingly, although simple frontier orbital analysis predicts an intramolecular photoinduced electron transfer quenching pathway in conjugated oximates, TD-DFT (Time-dependent density functional theory) quantum chemical calculations support non-radiative dark S₁ excited state deactivation as a fluorescence quenching mechanism. Due to the acid-base sensing mechanism and sensitive “turn-on” fluorescent response, both studied coumarin aldoxime chemosensors exhibit rapid response to low-level water content in polar aprotic solvents, with detection limits comparable to chemodosimeters or chemosensors based on interpolymer π-stacking aggregation.

Reversible Colorimetric Sensor for Moisture Detection in Organic Solvents and Application in Inkless Writing

Colorimetric sensors based on Sudan-III (1) and Alizarin red S (2) have been developed for the detection of a trace amount of water in organic solvents such as THF, acetone, acetonitrile, and DMSO. The deprotonated (anionic) forms of 1 and 2 namely 1.F and 2.F are reprotonated by using a trace amount of water. Deprotonation of 1 and 2 was obtained by using fluoride anion. Test papers of 1.F and 2.F in organic solvents with and without moisture showed dramatic changes in color. Receptor 1.F exhibits high sensitivity for water in acetone and THF with the detection limit as low as 0.0042 and 0.0058 wt %. Remarkably, probes 1.F and 2.F are reversible in nature both in solution and in test strips. 1.F and 2.F are reversible and reusable for sensing moisture in the organic solvents with high selectivity, high sensitivity, and fast response. The reversible moisture sensor 1.F has also been used for application in inkless writing.

J-Type Heteroexciton Coupling Effect on an Asymmetric Donor-Acceptor-Donor-Type Fluorophore

The novel donor-acceptor-donor (D-A-D)-type fluorophore with an asymmetric structure is reported. The twisted-induced charge transfer (TICT) luminescence was observed. The degree of charge transfer and radiative rate constant in the luminescence increased simultaneously with increase in orientational polarizability of solvents. In contrast to the numerous CT fluorophore researches, this behavior has never been previously observed. This characteristic behavior reveals the existence of an effective exciton coupling between the CT states in the donor-acceptor-donor-type fluorophore for the first time.

Turn-on fluorescent sensor for the detection of cyanide based on a novel dicyanovinyl phenylacetylene

A novel phenylacetylene derivative (3) was successfully synthesized via Sonogashira coupling and a Knoevenagel reaction for cyanide ion detection.

Aggregation-induced emission (AIE) characteristic of water-soluble tetraphenylethene (TPE) bearing four sulfonate salts

Aggregation-induced emission (AIE) characteristic of water-soluble tetraphenylethene (WS-TPE), was investigated by the addition of organic solvent into WS-TPE aqueous solution.