A simple and efficient synthesis of 5-hydroxymethylfurfural from carbohydrates using acidic ionic liquid grafted on silica gel

The catalytic application of 3-(4-sulfobutyl)-1H-imidazole-3-ium chloride immobilized on activated silica gel (SiO2-Imi-SO3H) for the production of 5-hydroxymethylfurfural is described here for the first time. This material was synthesized using a three-step method involving the grafting of chloropropyl groups onto activated silica gel, the substitution of zwitterions, and the acidification of zwitterions to form silica-supported ionic liquid. The successful immobilization of the IL on silica gel was confirmed through energy-dispersive X-ray (EDX) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and elemental mapping. SiO2-Imi-SO3H-2 demonstrated good catalytic activity and recycling ability in fructose dehydration to 5-HMF. Several conditions for reaction were investigated, and an excellent 5-HMF yield (94.1%) was obtained after 4 h at 160 °C in dimethyl sulfoxide (DMSO) from fructose. Furthermore, a mechanism was proposed, the catalyst's reusability was investigated, and the catalyst was applied for the conversion of glucose to 5-HMF with other metal salts.

High Conversion of Concentrated Sugars to 5-Hydroxymethylfurfural over a Metal-free Carbon Catalyst: Role of Glucose-Fructose Dimers

To reduce the production cost of chemicals from renewable resources, the feedstock loading must be high and the catalyst must be of low cost and efficient. In this study, at a very short reaction time of 10 min at 125 °C, concentrated sugar solutions (20 wt %, 101 wt % on solvent) were converted to 5-hydroxymethylfurfural (HMF) over a cotton gin trash (CGT)-derived sulfonated carbon catalyst in a 1-butyl-3-methyl-imidazolium chloride ([BMIM]Cl) and 2-methyltetrahydrofuran (MeTHF) biphasic system. We report, for the first time, that the presence of glucose either as a covalently bonded monomer in sucrose or in a mixture with fructose achieved yields of HMF up to 62 mol % compared to a value of only 39 mol % obtained with fructose on its own. In the concentrated reaction medium, glucose, fructose, and sucrose molecules produce difructose anhydrides, dimers/reversion products, and sucrose isomers. The glucose-fructose dimers formed in sucrose and glucose/fructose reaction systems play a critical role in the transformation of the sugars to a higher-than-expected HMF yield. Thus, a strategy of using cellulosic glucose, where it is partially converted to fructose content and the high sugar concentration sugar mixture is then converted to HMF, should be exploited for future biorefineries.

Life Cycle Assessment of Production of Hydrochar via Hydrothermal Carbonization of Date Palm Fronds Biomass

This study presents novel life cycle assessment (LCA) findings on hydrochar production from Saudi-Arabia-based date palm fronds biomass waste using hydrothermal carbonization (HTC). The LCA procedure incorporated normalization, weighting, and improvement assessment. The system boundary encompassed water consumption and energy requirements within a lab setting representing a gate-to-gate process. The OpenLCA 1.11.0 software with the European Life Cycle Database 3.2 (ELCD 3.2) was utilized for the study and we employed the ReCiPe Midpoint (H) 2016 and Environmental Footprint 3.0 (EF 3.0) impact assessment methods. The results indicated that fossil fuel usage represented the most significant impact category with the HTC and drying processes identified as major contributors. It was also observed that the HTC process exerted far greater detrimental impacts on the environment than the biomass grinding process. The overwhelming impact of fossil fuel resources could be mitigated by optimizing the batches of biomass or hydrochar samples in each operation, which could alleviate fossil fuel consumption by up to 94%. The findings emphasize the need for targeted interventions to mitigate the environmental burden and contribute to sustainable hydrochar production.

Synthesis of Carbon Microspheres from Inedible Crystallized Date Palm Molasses: Influence of Temperature and Reaction Time

In this work, carbon microspheres (CMs) were prepared by hydrothermal carbonization (HTC) of inedible crystallized date palm molasses. The effects of temperature and reaction time on the prepared materials were studied. Experiments were carried out at different temperatures (180, 200, 230 and 250 °C) with reaction times ranging from 2 to 10 h. It was found that temperature had the greatest influence on the mass yield of the CMs. No solid products were observed at a temperature of 180 °C and a reaction time less than 2 h. The highest yield was found to be 40.4% at 250 °C and a reaction time of 6 h. The results show that the CMs produced were approximately 5-9 μm in diameter. The results also show that the largest diameter of the CMs (8.9 μm) was obtained at a temperature of 250 °C and a reaction time of 6 h. Nonetheless, if the reaction time was extended beyond 6 h at 250 °C, the CMs fused and their shapes were deformed (non-spherical shapes). The synthesized materials were characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), Branuer-Emmett-Teller (BET) and thermogravimetric analysis (TGA). BET surface areas for the four samples were found to be less than 1 m²/g. The methylene blue adsorption studies indicated that the equilibrium adsorption capacity was reached after 15 min, with a maximum adsorption capacity of 12 mg/g. The recycling of date palm molasses (a known processed waste) to generate a useable carbon microsphere represents a beneficial step in the application of sustainable processing industries in the Middle East.

Co-hydrothermal carbonization of swine manure and cellulose: Influence of mutual interaction of intermediates on properties of the products

Co-hydrothermal carbonization (HTC) of livestock manure and biomass might improve the fuel properties of the hydrochar due to the high reactivity of the biomass-derived intermediates with the abundant oxygen-containing functionalities. However, the complicated compositions make it difficult to explicit the specific roles of the individual components of biomass played in the co-HTC process. In this study, cellulose was used for co-HTC with swine manure to investigate the influence on the properties of the hydrochar. The yield of hydrochar obtained from co-HTC reduced gradually with the cellulose proportion increased, and the solid yield was lower than the theoretical value. This was because the cellulose-derived intermediates favored the stability of the fragments from hydrolysis of swine manure. The increased temperature resulted in the reduction of the hydrochar yield whereas the prolonged time enhanced the formation of solid product. The interaction of the co-HTC intermediates facilitated the formation of O-containing species, thus making the solid more oxygen- and hydrogen-rich with a higher volatility. In addition, the co-HTC affected the evolution of functionalities like -OH and CO during the thermal treatment of the hydrochar and altered its morphology by stuffing the pores from swine manure-derived solid with the microspheres from HTC of cellulose. The interaction of the varied intermediates also impacted the formation of amines, ketones, carboxylic acids, esters, aromatics and the polymeric products in distinct ways.

Recent Advances in Transition Metal Dichalcogenide Cathode Materials for Aqueous Rechargeable Multivalent Metal-Ion Batteries

The generation of renewable energy is a promising solution to counter the rapid increase in energy consumption. Nevertheless, the availability of renewable resources (e.g., wind, solar, and tidal) is non-continuous and temporary in nature, posing new demands for the production of next-generation large-scale energy storage devices. Because of their low cost, highly abundant raw materials, high safety, and environmental friendliness, aqueous rechargeable multivalent metal-ion batteries (AMMIBs) have recently garnered immense attention. However, several challenges hamper the development of AMMIBs, including their narrow electrochemical stability, poor ion diffusion kinetics, and electrode instability. Transition metal dichalcogenides (TMDs) have been extensively investigated for applications in energy storage devices because of their distinct chemical and physical properties. The wide interlayer distance of layered TMDs is an appealing property for ion diffusion and intercalation. This review focuses on the most recent advances in TMDs as cathode materials for aqueous rechargeable batteries based on multivalent charge carriers (Zn2+, Mg2+, and Al3+). Through this review, the key aspects of TMD materials for high-performance AMMIBs are highlighted. Furthermore, additional suggestions and strategies for the development of improved TMDs are discussed to inspire new research directions.

Catalytic Conversion of Biomass to Furanic Derivatives with Deep Eutectic Solvents

Biomass is the only renewable organic carbon resource in nature, and the transformation of abundant biomass into various chemicals has received immense spotlight. As a novel generation of designer solvents, deep eutectic solvents (DESs) have been widely used in biorefinery due to their excellent properties including low cost, easy preparation, and biodegradability. Although there have been some reports summarizing the performance of DESs for the transformation of biomass into various chemicals, few Reviews illuminate the relationship between the functional structure of DESs and catalytic conversion of biomass. Hence, this Minireview comprehensively summarizes the effects of the types of functional groups in DESs on catalytic conversion of biomass into furanic derivatives, such as carboxylic acid-based hydrogen-bond donors (HBDs), carbohydrate-based HBDs, polyalcohol-based HBDs, amine/amide-based HBDs, spatial structure of HBDs, and various hydrogen-bond acceptors (HBAs). It also further summarizes the effects of adding different additives into the DESs on the synthesis of high value-added chemicals, including water, liquid inorganic acids, Lewis acids, heteropoly acids, and typical solid acids. Moreover, current challenges and prospects for the application of DESs in biomass conversion are provided.

Sustainable Solvothermal Conversion of Waste Biomass to Functional Carbon Material: Extending Its Utility as a Biocompatible Cosolvent for Lysozyme

Functional carbon material synthesis from waste biomass by a sustainable method is of prime importance and has wide variety of applications. Herein, functional carbon materials with structural variability are synthesized using a well-known solvothermal method. The leftover pulp waste biomass (PB) of citrus limetta is converted to functional carbon by treatment with a mixture of choline bitartrate (ChBt) and FeCl₃ (1:2 mol ratio) as a solvent. The biomass to solvent ratio is varied as 1:1, 0.8:1, and 0.4:1 during solvothermal treatment to obtain PB-1, PB-2, and PB-3 as functional carbon materials, respectively. On characterization, PB carbon materials were found to be rich in oxygen-containing functional groups possessing different morphologies. Furthermore, results suggested the role of solvent as a soft template and catalyst during the synthesis of carbon materials. The feasibility of synthesized carbon materials as a biocompatible cosolvent for lysozyme was evaluated. In the case of PB-2 material (synthesized using 0.8:1 biomass to solvent ratio), results show an enhancement of lysozyme activity by 150%. Besides, spectroscopic and calorimetric data confirm the preservation of thermal and structural stability of lysozyme in the PB-2 solution. Thus, this study stipulates PB-2 as an excellent cosolvent for protein studies. With this work, we aim to delve into an entirely new arena of applications of biomass in the field of biotechnology.

Ruthenium oxide nanoparticles immobilized over Citrus limetta waste derived carbon material for electrochemical detection of hexestrol

Hexestrol is a non-steroidal estrogen which causes carcinogenic effects in animals. It is therefore important to develop sensitive and selective test methods for its early detection. Herein, we report the development of an electrochemical sensor to detect hexestrol in ultralow concentrations. In order to devise a simple and cost-effective hexestrol sensing electrode, attention is paid to the development of biomass-derived porous carbon (PCB) with large surface area and suitable porosity to immobilize ruthenium oxide nanoparticles (RuO₂ NPs, 3-4 nm). The leftover Citrus limetta pulp is chosen as waste biomass since it has N and O based chemical species. Structural, morphological and compositional analysis of PCB and RuO₂@PCB revealed well-dispersed RuO₂ NPs over the PCB surface. High loading (5.27 at%) of Ru content is achieved due to the large surface area of PCB. Cyclic voltammetry, chronoamperometry and differential pulse voltammetry results suggest that the RuO₂@PCB/ITO electrode is capable of detecting hexestrol concentration (in the range of 1 × 10^-7-2 × 10^-5 M). The practical application of hexestrol detection in milk samples demonstrates the recovery from 96.28 to 101%.

Simplifying the synthesis of carbon inverse opals

Carbon inverse opals (IOs) were prepared via a facile synthesis approach using a sucrose-based precursor and polystyrene (PS) spheres as a sacrificial template. During IO preparation, polymer spheres are typically removed by dispersion in organic solvents, such as toluene or tetrahydrofuran. In this study, carbon IOs are prepared with and without removal of PS spheres by toluene to determine the influence of template removal prior to high-temperature treatment on the morphology and chemistry of the resulting carbons. Properties of samples are compared through a systematic investigation by electron microscopy, Fourier-transform infrared spectroscopy and Raman spectroscopy. We demonstrate that a commonly used processing step—polymer sphere template chemical removal—does not make any significant difference to the IO morphology. A correlation of Raman spectroscopy with SEM imaging and TGA analysis indicates that carbon IOs prepared without the solvent-treatment step are more ordered than samples prepared with this processing step. The key finding of this report is the simplified IO synthesis procedure, which can be adapted to the preparation of IOs of other materials besides carbon.

A simplified synthesis method to prepare carbon inverse opals is presented, which is applicable to other inverse opal materials.

Bifunctional carbon Ni/NiO nanofiber catalyst based on 5-sulfosalicylic acid for conversion of C5/C6 carbohydrates into ethyl levulinate

A method was developed for preparing bifunctional carbon Ni/NiO nanofiber catalysts that promote efficient one-pot conversion of C5/C6 carbohydrates into levulinate esters in alcohol solvents.

Dehydration of fructose, sucrose and inulin to 5-hydroxymethylfurfural over yeast-derived carbonaceous microspheres at low temperatures

This work prepared carbonaceous microspheres by hydrothermal carbonization of yeast cells followed by sulfonation with concentrated sulphuric acid (98%) at room temperature. The obtained carbonaceous product (CM-SO₃H) had a high acid density (1.80 mmol g⁻¹). We evaluated CM-SO₃H as a solid catalyst for the dehydration of fructose-based carbohydrates to 5-hydroxymethylfurfural (5-HMF) in the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). The effects of the catalyst and substrate loadings as well as the reaction temperature and time on the yield of 5-HMF were investigated. Under the optimum conditions, a 5-HMF yield of up to 83.5% was obtained from fructose with a reaction temperature of 80 °C for 30 min. Furthermore, 44.8% and 59.2% 5-HMF yields were obtained from sucrose (80 °C for 30 min) and inulin (80 °C for 60 min), respectively. CM-SO₃H and [BMIM][Cl] showed high stability and could be recycled between five and eight times without significant loss of catalytic activity. More importantly, the catalytic system could be applied to high substrate concentrations. CM-SO₃H combined with [BMIM][Cl] is a promising system for transforming fructose-based carbohydrates into 5-HMF.

This work prepared carbonaceous microspheres by hydrothermal carbonization of yeast cells followed by sulfonation with concentrated sulphuric acid (98%) at room temperature.

Mesoporous silica-carbon composites fabricated by a universal strategy of hydrothermal carbonization: controllable synthesis and applications

Mesoporous silica-carbon composite materials, with homogeneous and thickness-controllable carbon coating, were synthesized by using a universal strategy of hydrothermal carbonization, and the carbon layer could be coated on the surface of ordered and disordered mesoporous silica. The electrostatic interaction between amino-modified silica and hydrothermal carbon was regarded as the main driving force for the formation of homogeneous carbon coverage on the silica surface. The obtained composites showed high graphitization degree, and controlled morphology (shape and particle size) and pore size by adjusting the species of carriers and hydrothermal conditions. The application results demonstrated that a thin carbon layer possessed high adsorption capacities for dyes, and the composite could be rapidly recovered by sedimentation (10 min) after adsorption with 30 μm spherical silica gel as the carrier. Besides, baseline chromatographic separation of oligosaccharide isomers could be achieved on the silica-carbon column. These results indicated that the silica-carbon composites should be promising functional materials for the large-molecule-involving processes such as adsorption and chromatographic separation.

One-step fabrication of carbonaceous solid acid derived from lignosulfonate for the synthesis of biobased furan derivatives

An eco-friendly and low-cost lignosulfonate-based acidic carbonaceous catalyst (LS-SO₃H) was effectively fabricated using the sulfite pulping by-product of sodium lignosulfonate as a precursor by facile one-step simultaneous carbonization and sulfonation, and employed for the synthesis of promising biofuel furan derivatives from biorenewable feedstocks. The catalyst preparation conditions significantly affected the preparation and properties of LS-SO₃H. A relatively high catalyst preparation yield (40.4%) with strong –SO₃H density (1.33 mmol g⁻¹) were achieved when the lignosulfonate was treated in concentrated H₂SO₄ solution at 120 °C for 6 h. The preparation yield of LS-SO₃H was nearly twice as much as that of one-step prepared catalyst using alkaline lignin (another technical lignin from pulping) as a precursor. The as-prepared LS-SO₃H had similar textural characteristics to the frequently-used two-step prepared carbonaceous catalyst involving pyrolysis carbonization and sulfonation. LS-SO₃H was found to show good catalytic activity for the synthesis of 5-ethoxymethylfurfural (EMF) in ethanol medium, affording around 86%, 57% and 47% yields from 5-hydroxymethylfurfural (HMF), fructose and inulin, respectively. Also, a high HMF yield of 83% could be obtained from fructose when DMSO was replaced as reaction medium. The used LS-SO₃H was readily recovered by filtration, and remained active in recycle runs.

An easy-prepared and bio-supported lignosulfonate-based acidic carbonaceous catalyst was developed for the synthesis of promising furan biofuels from biorenewable feedstocks.

Microwave-Assisted Conversion of Fructose to 5-Hydroxymethylfurfural Using Sulfonated Porous Carbon Derived from Biomass

In this study, a series of sulfonated carbon solid acid catalysts was prepared by a template method using fructose as the carbon source and zinc chloride as the catalyst and template. The reaction involving fructose dehydration to 5-hydroxymethylfurfural (5-HMF) was investigated using these catalysts with microwave assistance in dimethyl sulfoxide. The influence of different catalysts, catalyst amount, microwave power, fructose content, and reaction temperature, as well as the reusability of the catalyst, were investigated. The prepared catalysts were characterised by X-ray diffraction, FT-IR spectroscopy, scanning electron microscopy, nitrogen adsorption–desorption measurement, and temperature-programmed desorption of ammonia gas, and the total numbers of surface acid sites of these carbon-based solid acid catalysts were analysed by chemical adsorption–desorption of ammonia along with the standard curve for ammonia. The results revealed that the C2-SO3H catalyst exhibited the best activity. A 5-HMF yield of 87 % and fructose conversion of 99 % were achieved at 170°C in DMSO after 3 min. The microwave-assisted synthetic strategy was advantageous compared with the traditional method because this approach could shorten the total reaction time.

Effective saccharification of holocellulose over multifunctional sulfonated char with fused ring structures under microwave irradiation

The SC catalysts, bearing multifunctional groups in graphene-like fused ring structure, exhibit remarkable catalytic performance on saccharification of holocellulose.

One-pot synthesis of sulfonated graphene oxide for efficient conversion of fructose into HMF

Sulfonated graphene oxide prepared through a one-pot method shows excellent catalytic performance for the dehydration of fructose into 5-hydroxymethylfurfural.