Uniqueness of Nanoscale Confinement for Fast Water Transport: Effect of Nanotube Diameter and Hydrophobicity

Inspired by the enhanced water permeability of carbon nanotubes (CNTs), molecular dynamics simulations were performed to investigate the transport behavior through nanotubes made of boron nitride (BNNT), silicon carbide (SiC), and silicon nitride (SiN) alongside carbon nanotubes (which have different hydrophobic attributes) considering their implication for reverse osmosis (RO) membranes under different practical environments. According to our findings, not only do CNTs but also other kinds of nanotubes exhibit transition anomalies with increasing diameter. Utilizing the robust two-phase thermodynamic (2PT) methods, the current examinations shed light on thermodynamic origin of favorable water filling of these nanotubes. The results show that regardless of the nanotube material, the filling of water inside small nanopores (d < 10 Å) as well as within pores of diameter larger than 15 Å will always be favored by the entropy of filling. However, the entropic preference for filling nanotubes with a diameter of 10-15 Å depends on the constituent material. In particular, the enhancement in total entropy of confined water was mainly due to the increased rotational freedom of confined water molecules. The thermodynamic origin of water transport was correlated with the structural and fluidic behavior of water inside these nanotubes. The observed data for density, flow, structure correlation functions, water-water coordination, tetrahedral order parameter, hydrogen bonds, and density of states functions quantitatively support the observed entropy behavior. Of critical importance is that the present study demonstrates the effectiveness of RO filtration using nanotubes of boron nitride rather than carbon. Furthermore, it was found that one should avoid the use of silicon nanotubes unless filtration needs to be performed under harsh environments where nanotube of other materials cannot survive. Specifically, the results show that both the structural and dynamic properties of water confined in BNNTs are similar to those of CNT's, and for SiNT it is similar as SiC. Our results show that besides the nanotube material, the chirality index of the nanotube also plays a significant role in determining the structure, dynamics and thermodynamics of confined water molecules.

State-of-the-art predictive modeling of heavy metal ions removal from the water environment using nanotubes

In this research, molecular dynamics (MD) simulation is used to investigate the efficiency of carbon nanotubes (CNT) and boron nitride nanotubes (BNNT) in removing lead ions from contaminated waters. Then the effect of functionalizing nanotubes with -COO- and COOH- functional groups and the nanotubes' absorption performance of two different concentrations of lead ions are studied. To better evaluate adsorption process, the set of descriptors, such as interaction energies, radial distribution function, etc., are calculated. The MD results show that the absorption performance is significantly improved by modifying the surface of CNT and BNNT with functional groups. In addition, the adsorption capacity increases in higher concentrations of Pb ions at BNNTCOO- and CNTCOOH systems. The interaction energy of BNNTCOO- with a concentration of 50 lead ions is - 2879.28 kJ/mol, which is about 106 kJ/mol more negative than BNNTCOO- at a concentration of 20 lead ions. Also, it is observed that the functionalization of both nanotubes with -COO- increases their absorption capacity. The obtained results from this study provide significant information about the mechanisms of lead adsorption on the surface of nanotubes.

Effects of Electrostatic Interactions on Kapitza Resistance in Hexagonal Boron Nitride-Water Interfaces

Electrostatic interactions in nanoscale systems can influence the heat transfer mechanism and interfacial properties. This study uses molecular dynamics simulations to investigate the impact of various electrostatic interactions on the Kapitza resistance (R_k) on a hexagonal boron nitride-water system. The Kapitza resistance at hexagonal boron nitride nanotube (hBNNT)-water interface reduces with an increase in diameter of the nanotube due to more aggregation of water molecules per unit surface area. An increase in the partial charges on boron and nitride caused the reduction in R_k. With the increase in partial charge, a better hydrogen bonding between hBNNT and water was observed, whereas the structure and order of the water molecules remain the same. Nevertheless, the addition of NaCl salt into water does not have any influence on interfacial thermal transport. R_k remains unchanged with electrolyte concentration because the cumulative Coulombic interaction between the ions and the hBNNT is significantly less when compared with water molecules. Furthermore, the effect of electric field strength on interfacial heat transfer is also investigated by providing uniform positive and negative surface charges on the outermost hBN layers. R_k is nearly independent of the practical range of applied electric fields and decreases with an increasing electric field for extreme field strengths until the electrofreezing phenomenon occurs. The ordering of water molecules toward the charged surface leads to an increase in the layering effect, causing the reduction in R_k in the presence of an electric field.

Water molecules in CNT-Si3N4 membrane: Properties and the separation effect for water-alcohol solution

Water confined in carbon nanotubes (CNTs) has been intensively studied because of its unique properties and potential for various applications and is often embedded in silicon nitride (Si₃N₄) membranes. However, the understanding of the influence of Si₃N₄ on the properties of water in CNTs lacks clarity. In this study, we performed molecular dynamics simulations to investigate the effect of the Si₃N₄ membrane on water molecules inside CNTs. The internal electric field generated in the CNTs by the point charges of the Si₃N₄ membrane changes the structure and dynamical properties of water in the nanotubes, causing it to attain a disordered structure. The Si₃N₄ membrane decreases the diffusivity of water in the CNTs; this is because the Coulomb potential energy (i.e., electrostatic interaction) of water decreases owing to the presence of Si₃N₄, whereas the Lennard-Jones potential energy (i.e., van der Waals interaction) does not change significantly. Furthermore, electrostatic interactions make the water structure more stable in the CNTs. As a result, the Si₃N₄ membrane enhances the separation effect of the water-methanol mixture with CNTs in the presence of an external electric field. Furthermore, the threshold of the external electric field strength to induce water-methanol separation with CNTs is reduced owing to the presence of a silicon nitride membrane.

Insights into water permeability and Hg2+ removal using two-dimensional nanoporous boron nitride

Industrial wastewater containing Hg²⁺, when discharged into nature, will pose a serious threat to ecological security.

Environmentally friendly chitosan/PEI-grafted magnetic gelatin for the highly effective removal of heavy metals from drinking water

The development of environmentally friendly sorbents with a high adsorption capacity is an essential problem in the removal of heavy metals from drinking water. In this study, magnetic gelatin was prepared using transglutaminase as a cross-linker, which could only catalyze an acyl-transfer reaction between lysine and glutamine residues of the gelatin and not affect other amino groups. Therefore, it was beneficial for the further modification based on the amino groups, and did not affect the spatial structure of gelatin, which can effectively prevent the embedding of active sites in the polymer matrix. After modification with the chitosan/polyethylenimine copolymers, the numbers of amino groups was greatly increased, and the magnetic composites exhibited a high adsorption capacity, excellent water compatibility and simple magnetic separation. The adsorption capacities of lead and cadmium were 341 mg g⁻¹ and 321 mg g⁻¹, respectively, which could be used for the removal of metal ions in drinking water.

Hexagonal boron nitride and water interaction parameters

The study of hexagonal boron nitride (hBN) in microfluidic and nanofluidic applications at the atomic level requires accurate force field parameters to describe the water-hBN interaction. In this work, we begin with benchmark quality first principles quantum Monte Carlo calculations on the interaction energy between water and hBN, which are used to validate random phase approximation (RPA) calculations. We then proceed with RPA to derive force field parameters, which are used to simulate water contact angle on bulk hBN, attaining a value within the experimental uncertainties. This paper demonstrates that end-to-end multiscale modeling, starting at detailed many-body quantum mechanics and ending with macroscopic properties, with the approximations controlled along the way, is feasible for these systems.

Separation of carbon dioxide and nitrogen gases through modified boron nitride nanosheets as a membrane: insights from molecular dynamics simulations

The progress of gas propagating through the pores of BNNSs was simulated using MD simulations. During a simulation time of 50 ns at 298 K, there is no CO₂ propagating through, meaning a high selectivity of pore 4 for CO₂/N₂ separation.