Soft-Template-Based Manufacturing of Gold Nanostructures for Energy and Sensing Applications

Implantable and wearable bioelectronic systems can enable tailored therapies for the effective management of long-term diseases, thus minimising the risk of associated complications. In this context, glucose fuel cells hold great promise as in- or on-body energy harvesters for ultra-low-power bioelectronics and as self-powered glucose sensors. We report here the generation of gold nanostructures through a gold electrodeposition method in a soft template for the abiotic electrocatalysis of glucose in glucose fuel cells. Two different types of soft template were used: a lipid cubic phase-based soft template composed of Phytantriol and Brij®-56, and an emulsion-based soft template composed of hexane and sodium dodecyl sulphate (SDS). The resulting gold structures were first characterised by SAXS, SEM and TEM to elucidate their structure, and then their electrocatalytic activity towards glucose was compared in both a three-electrode set-up and in a fuel cell set-up. The Phytantriol/Brij®-56 template led to a nanofeather-like Au structure, while the hexane/SDS template led to a nanocoral-like Au structure. These templated electrodes exhibited similar electrochemical active surface areas (0.446 cm2 with a roughness factor (RF) of 14.2 for Phytantriol/Brij®-56 templated nanostructures and 0.421 cm2 with an RF of 13.4 for hexane/SDS templated nanostructures), and a sensitivity towards glucose of over 7 μA mM-1 cm-2. When tested as the anode of an abiotic glucose fuel cell (in a phosphate-buffered solution with a glucose concentration of 6 mM), a maximum power density of 7 μW cm-2 was reached; however the current density in the case of the fuel cell with the Phytantriol/Brij®-56 templated anode was approximately two times higher, reaching the value of 70 μA cm-2. Overall, this study demonstrates two simple, cost-effective and efficient strategies to manipulate the morphology of gold nanostructures, and thus their catalytic property, paving the way for the successful manufacturing of functional abiotic glucose fuel cells.

Comparison of Vibrational Spectroscopic Techniques for Quantification of Water in Natural Deep Eutectic Solvents

Vibrational spectroscopic techniques, i.e., attenuated total reflectance infrared (ATR-IR), near infrared spectroscopy (NIRS) and Raman spectroscopy (RS), coupled with Partial Least Squares Regression (PLSR), were evaluated as cost-effective label-free and reagent-free tools to monitor water content in Levulinic Acid/L-Proline (LALP) (2:1, mol/mol) Natural Deep Eutectic Solvent (NADES). ATR-IR delivered the best outcome of Root Mean Squared Error (RMSE) of Cross-Validation (CV) = 0.27% added water concentration, RMSE of Prediction (P) = 0.27% added water concentration and mean % relative error = 2.59%. Two NIRS instruments (benchtop and handheld) were also compared during the study, respectively yielding RMSECV = 0.35% added water concentration, RMSEP = 0.56% added water concentration and mean % relative error = 5.13% added water concentration, and RMECV = 0.36% added water concentration, RMSEP = 0.68% added water concentration and mean % relative error = 6.23%. RS analysis performed in quartz cuvettes enabled accurate water quantification with RMECV = 0.43% added water concentration, RMSEP = 0.67% added water concentration and mean % relative error = 6.75%. While the vibrational spectroscopic techniques studied have shown high performance in relation to reliable determination of water concentration, their accuracy is most likely related to their sensitivity to detect the LALP compounds in the NADES. For instance, whereas ATR-IR spectra display strong features from water, Levulinic Acid and L-Proline that contribute to the PLSR predictive models constructed, NIRS and RS spectra are respectively dominated by either water or LALP compounds, representing partial molecular information and moderate accuracy compared to ATR-IR. However, while ATR-IR instruments are common in chemistry and physics laboratories, making the technique readily transferable to water quantification in NADES, Raman spectroscopy offers promising potential for future development for in situ, sample withdrawal-free analysis for high throughput and online monitoring.

Monitoring the water content in NADES extracts from spirulina biomass by means of ATR-IR spectroscopy

Attenuated total reflectance-infrared spectroscopy (ATR-IR) coupled with partial least squares regression (PLSR) was evaluated as a rapid, label free and cost-effective tool to quantify water content in extracts obtained from spirulina wet biomass using a glucose glycerol natural deep eutectic solvent (NADES). NADESs are green, renewable and biodegradable solvents with unique properties outcompeting existing organic solvents, for instance, for plant or biomass extraction. The properties of NADESs depend critically on their water concentration, and therefore, it is essential to develop methods to monitor it, to ensure optimal extraction efficiency and experimental repeatability to achieve a better standardization of extraction protocols. First, Karl Fischer titration was performed on a set of 20 NADES extracts in order to obtain reference water concentrations. Secondly, ATR-IR spectra were collected and subjected to datamining to construct PLSR predictive models. An R² value of 0.9996, a mean root mean square error of cross validation of 0.136% w/w and a root mean square error of prediction of 0.130% w/w highlight the feasibility and reliability to perform quantitative analysis using ATR-IR. Moreover, the mean relative error percentage achieved, ∼0.5%, confirms the high accuracy of water concentration determination in NADES extracts. This work demonstrates that powerful alternatives are available to provide more environmentally responsible analytical protocols. ATR-IR spectroscopy applied to NADES extracts does not require any sample preparation, reagents or solvents and has minimal requirements for single use consumables. The technique is consistent with current concerns to develop greener chemistry, especially in the field of extraction of natural compounds from plants which currently represents a major focus of interest in both research and industry.

Ionic Liquids and Deep Eutectics as a Transformative Platform for the Synthesis of Nanomaterials

Ionic liquids (ILs) are becoming a revolutionary synthesis medium for inorganic nanomaterials, permitting more efficient, safer and environmentally benign preparation of high quality products. A smart combination of ILs and...

In Situ Water Quantification in Natural Deep Eutectic Solvents Using Portable Raman Spectroscopy

Raman spectroscopy is a label-free, non-destructive, non-invasive analytical tool that provides insight into the molecular composition of samples with minimum or no sample preparation. The increased availability of commercial portable Raman devices presents a potentially easy and convenient analytical solution for day-to-day analysis in laboratories and production lines. However, their performance for highly specific and sensitive analysis applications has not been extensively evaluated. This study performs a direct comparison of such a commercially available, portable Raman system, with a research grade Raman microscope system for the analysis of water content of Natural Deep Eutectic Solvents (NADES). NADES are renewable, biodegradable and easily tunable “green” solvents, outcompeting existing organic solvents for applications in extraction from biomass, biocatalysis, and nanoparticle synthesis. Water content in NADES is, however, a critical parameter, affecting their properties, optimal use and extraction efficiency. In the present study, portable Raman spectroscopy coupled with Partial Least Squares Regression (PLSR) is investigated for rapid determination of water content in NADES samples in situ, i.e., directly in glassware. Three NADES systems, namely Betaine Glycerol (BG), Choline Chloride Glycerol (CCG) and Glucose Glycerol (GG), containing a range of water concentrations between 0% (w/w) and 28.5% (w/w), were studied. The results are directly compared with previously published studies of the same systems, using a research grade Raman microscope. PLSR results demonstrate the reliability of the analysis, surrendering R² values above 0.99. Root Mean Square Errors Prediction (RMSEP) of 0.6805%, 0.9859% and 1.2907% w/w were found for respectively unknown CCG, BG and GG samples using the portable device compared to 0.4715%, 0.3437% and 0.7409% w/w previously obtained by analysis in quartz cuvettes with a Raman confocal microscope. Despite the relatively higher values of RMSEP observed, the comparison of the percentage of relative errors in the predicted concentration highlights that, overall, the portable device delivers accuracy below 5%. Ultimately, it has been demonstrated that portable Raman spectroscopy enables accurate quantification of water in NADES directly through glass vials without the requirement for sample withdrawal. Such compact instruments provide solvent and consumable free analysis for rapid analysis directly in laboratories and for non-expert users. Portable Raman is a promising approach for high throughput monitoring of water content in NADES that can support the development of new analytical protocols in the field of green chemistry in research and development laboratories but also in the industry as a routine quality control tool.

Comparison of Raman and attenuated total reflectance (ATR) infrared spectroscopy for water quantification in natural deep eutectic solvent

Natural deep eutectic solvents (NADES) are ionic solutions, of great interest for extraction from biomass, biocatalysis, and nanoparticle synthesis. They are easily synthesised and eco-friendly, have low volatility and high dissolution power, and are biodegradable. However, water content in NADES is a critical parameter, affecting their optimal use and extraction efficiency. Vibrational spectroscopic techniques are rapid, label-free, non-destructive, non-invasive, and cost-effective analytical tools that can probe the molecular composition of samples. A direct comparison between a previous study using attenuated total reflectance infrared (ATR-IR) spectroscopy for water quantification in NADES and the same investigation performed with Raman spectroscopy is presently reported. Three NADES systems, namely betaine-glycerol (BG), choline chloride-glycerol (CCG), and glucose-glycerol (GG), containing a range of water concentrations between 0% (w/w) and 40% (w/w), have been analysed with Raman spectroscopy coupled to partial least squares regression multivariate analysis. The values of root mean square error of cross-validation (RMSECV) obtained from analysis performed on the pre-processed spectra over the full spectral range (150-3750 cm^-1) are respectively 0.2966% (w/w), 0.4703% (w/w), and 0.2351% (w/w) for BG, GG, and CCG. While the direct comparison to previous ATR-IR results shows essentially similar outcomes for BG, the RMSECV is 33.14% lower and 65.84% lower for CG and CCG. Furthermore, mean relative errors obtained with Raman spectroscopy, and calculated from a set of samples used as independent samples, were 1.452% (w/w), 1.175% (w/w), and 1.188% (w/w). Ultimately, Raman spectroscopy delivered performances for quantification of water in NADES with similar accuracy to ATR-IR. The present demonstration clearly highlights the potential of Raman spectroscopy to support the development of new analytical protocols in the field of green chemistry.

Experimental and Theoretical Studies on Sustainable Synthesis of Gold Sol Displaying Dichroic Effect

Gold nanoparticles depending on their shape and mixtures of multiple shapes can exhibit peculiar optical properties, including the dichroic effect typical of the Lycurgus cup, which has puzzled scientists for a long time. Such optical properties have been recently exploited in several fields such as paint technology, sensors, dichroic polarizers, display (LCD) devices, laser applications, solar cells and photothermal therapy among others. In this article, we have demonstrated a simple room temperature one-pot synthesis of gold sol displaying a dichroic effect using a slow reduction protocol involving only trisodium citrate as a reducing agent. We found that the dichroic gold sol can be easily formed at room temperature by reducing gold salt by trisodium citrate below a certain critical concentration. The sol displayed an orangish-brown color in scattered/reflected light and violet/blue/indigo/purple/red/pink in transmitted light, depending on the experimental conditions. With minor changes such as the introduction of a third molecule or replacing a small amount of water in the reaction mixture with ethanol, the color of the gold sol under transmitted light changed and a variety of shades of red, pink, cobalt blue, violet, magenta and purple were obtained. The main advantage of the proposed method lies in its simplicity, which involves the identification of the right ratio of the reactants, and simple mixing of reactants at room temperature with no other requirements. TEM micrographs displayed the formation of two main types of particles viz. single crystal gold nanoplates and polycrystalline faceted polyhedron nanoparticles. The mechanism of growth of the nanoplates and faceted polyhedron particles have been described by an enhanced diffusion limited aggregation numerical scheme, where it was assumed that both trisodium citrate and the gold ions in solution undergo a stochastic Brownian motion, and that the evolution of the entire system is regulated by a principle of energy minimization. The predictions of the model matched with the experiments with a good accuracy, indicating that the initial hypothesis is correct.

Synthesis of SnO2, Zn-doped SnO2 and Zn2SnO4 nanostructure-based hierarchical architectures by using deep eutectic precursors and their photocatalytic application

Synthesis of Zn containing SnO₂ nanostructure-based hierarchical architectures by using deep eutectic precursors and their application for methyl orange degradation.

Deep eutectic solvents for polysaccharides processing. A review

In the review a new class of green solvents - Deep Eutectic Solvents (DES) as media for polysaccharides treatment has been presented. They are an alternative for ionic liquids, non- or low toxic, biodegradable multipurpose agents obtained via simple and convenient way. Moreover, a large number of composition possibilities allow to tailor their properties. Because of selective solubilization of polysaccharides DES can be used for lignocellulosic biomass delignification, cellulose extraction as well as cellulose nanofibrillation or nanocrystalization. DES have been applied in extraction, separation or purification of some specific biopolymers like chitin, carrageenans and xylans, but also as components of polysaccharide based materials, e.g. plasticizers (mainly for starch, but also for cellulose derivatives, chitosan, agar and agarose), compatibilizers or modifiers. An interest in applying DES as green solvents increased rapidly within last years and it may be expected that their applications in polysaccharides treatment would be developed also on industrial scale.

Deep eutectic-water binary solvent associations investigated by vibrational spectroscopy and chemometrics

Investigation of the behaviour of deep eutectic solvents (DESs) as novel green solvents in the presence of other solvents is of great interest. In this study the behaviour of a common natural DES, namely choline chloride-glycerol deep eutectic solvent (GDES), was studied in the presence of water. A detailed study of the association of the two solvents was performed by integration of two vibrational spectroscopic methods (FTIR and Raman spectroscopy) followed by multivariate analysis. Moreover, a binary mixture of glycerol (Gly) as one of the liquid constituents of GDES and water was explored under the same conditions. A quintuplet and ternary systems were resolved for GDES-water and Gly-water probes, respectively, using multivariate analysis of global data (multi-technique and multi-experiment data arrangements). The results confirmed that in the presence of water the GDES showed different behaviour from its components. Therefore, a DES can be introduced as an independent solvent with its unique properties. Also, different H-bond interaction energies of GDES and its pure components in the presence of water were shown by theoretical calculations based on a density functional theory framework. To investigate the effects of water on the structure of GDES, molecular dynamics (MD) simulations of GDES-water liquid mixtures were performed at 0.9 mole fraction of water.

Potential applications of deep eutectic solvents in natural gas sweetening for CO2 capture

Novel solvents named deep eutectic solvents (DESs) have been intensively investigated in recent years. Their non-toxicity, biodegradability, low volatility, easy preparation and low cost make them promising green solvents for several industrial processes. This article provides a status review of the possible applications of DESs in natural gas (NG) sweetening by carbon dioxide (CO

Pd nanospheres decorated reduced graphene oxide with multi-functions: Highly efficient catalytic reduction and ultrasensitive sensing of hazardous 4-nitrophenol pollutant

We illustrate a facile approach for in situ synthesis of Pd-gum arabic/reduced graphene oxide (Pd-GA/RGO) using GA as the reducing agent, which favors the instantaneous reduction of both Pd ions and GO into Pd nanoparticles (NPs) and RGO. From the morphological analysis of Pd-GA/RGO, we observed highly dispersed spherical 5nm Pd NPs decorated over RGO. The as-synthesized Pd-GA/RGO composite was employed for the catalytic reduction and the electrochemical detection of 4-nitrophenol (4-NP), respectively. The catalytic reduction of 4-NP was highly pronounced for Pd-GA/RGO (5min) when compared to Pd NPs (140min) and Pd/RGO (36min). This enhanced catalytic activity was attributed to the synergistic effect of Pd NPs and the presence of various functional groups of GA. Significantly, the fabricated sensor offered a low detection limit (9fM) with a wider linear range (2-80 pM) and long-term stability. The simple construction technique, high sensitivity, and long-term stability with acceptable accuracy in wastewater samples were the main advantages of the developed sensor. The results indicated that the as-prepared Pd-GA/RGO exhibited better sensing ability than the other graphene-based modified electrodes. Therefore, the proposed sensor can be employed as a more convenient sensing platform for environmental and industrial pollutants.

Synthesis of Gold Nanoparticles Using the Interface of an Emulsion Droplet

A facile and rapid method for synthesizing single crystal gold spherical or platelet (nonspherical) particles is reported. The reaction takes place at the interface of two immiscible liquids where the reducing agent decamethylferrocene (DmFc) was initially added to hexane and gold chloride (AuCl₄^-) to an aqueous phase. The reaction is spontaneous at room temperature, leading to the creation of Au nanoparticles (AuNP). A flow focusing microfluidic chip was used to create emulsion droplets, allowing the same reaction to take place within a series of microreactors. The technique allows the number of droplets, their diameter, and even the concentration of reactants in both phases to be controlled. The size and shape of the AuNP are dependent upon the concentration of the reactants and the size of the droplets. By tuning the reaction parameters, the synthesized nanoparticles vary from nanometer to micrometer sized spheres or platelets. The surfactant used to stabilize the emulsion was also shown to influence the particle shape. Finally, the addition of other nanoparticles within the droplet allows for core@shell particles to be readily formed, and we believe this could be a versatile platform for the large scale production of core@shell particles.

Facile and shape-controlled electrochemical synthesis of gold nanocrystals by changing water contents in deep eutectic solvents and their electrocatalytic activity

Au NCs with different morphologies were synthesized in DESs by changing water contents, and used as electrocatalysts for ethanol electrooxidation.

Gold nanosheets synthesized with red marine alga Actinotrichia fragilis as efficient electrocatalysts toward formic acid oxidation

In this study, gold nanosheets were synthesized with red marine alga (Actinotrichia fragilis) collected from Persian Gulf and used as an electrocatalyst for oxidation of formic acid.