ROMP-based Glycopolymers with High Affinity for Mannose-Binding Lectins

Well-defined, highly reactive poly(norbornenyl azlactone)s of controlled length (number-average degree of polymerization D P n ¯ = 10 to 1,000) were made by ring-opening metathesis polymerization (ROMP) of pure exo-norbornenyl azlactone. These were converted into glycopolymers using a facile postpolymerization modification (PPM) strategy based on click aminolysis of azlactone side groups by amino-functionalized glycosides. Pegylated mannoside, heptyl-mannoside, and pegylated glucoside were used in the PPM. Binding inhibition of the resulting glycopolymers was evaluated against a lectin panel (Bc2L-A, FimH, langerin, DC-SIGN, ConA). Inhibition profiles depended on the sugars and the degrees of polymerization. Glycopolymers from pegylated-mannoside-functionalized polynorbornene, with D P n ¯ = 100, showed strong binding inhibition, with subnanomolar range inhibitory concentrations (IC50s). Polymers surpassed the inhibitory potential of their monovalent analogues by four to five orders of magnitude thanks to a multivalent (synergistic) effect. Sugar-functionalized poly(norbornenyl azlactone)s are therefore promising tools to study multivalent carbohydrate-lectin interactions and for applications against lectin-promoted bacterial/viral binding to host cells.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Controlled Alternating Metathesis Copolymerization of Terminal Alkynes

Terminal alkynes display high reactivity toward Ru-carbene metathesis catalysts. However, the formation of a less reactive bulky carbene hinders their homopolymerization. Simultaneously, the higher reactivity of alkynes does not allow efficient cross propagation with sterically less-hindered cycloalkene monomers, resulting in inefficient copolymerization. Nonetheless, terminal alkynes undergo rapid cross-metathesis with vinyl ethers. Therefore, an efficient cross propagation can be achieved with terminal alkynes and cyclic enol ether monomers. Here, we show that terminal alkyne derivatives can be copolymerized in an alternating fashion with 2,3-dihydrofuran using Grubbs' third generation catalyst (G3). A linear relationship of the number-average molecular weight versus monomer to initiator ratio and block copolymer synthesis confirmed a controlled copolymerization. The SEC and NMR analyses of the synthesized copolymers confirmed the excellent control over molecular weight and exclusive alternating nature of the copolymer. The regioselective chain transfer of G3 to vinyl ether and the high reactivity of the Fischer-type Ru carbene toward terminal alkynes was also exploited for polymer conjugation. Finally, the presence of an acid labile backbone functionality in the synthesized alternating copolymers allowed complete degradation of the copolymer within a short time interval which was confirmed by SEC analyses.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Combining Hydroxyl-Yne and Thiol-Ene Click Reactions to Facilely Access Sequence-Defined Macromolecules for High-Density Data Storage

Through mimicking the synthesis of hereditary-information-containing nucleic acids, scientists are committed to synthesizing sequence-defined macromolecules. Herein, a protecting-group-free, metal-free, and atom-economical chemistry combining hydroxyl-yne and thiol-ene click reactions was developed to efficiently synthesize sequence-defined oligo(monothioacetals) (overall yield of 54% for an 11-step synthesis) from readily available starting compounds and monomers under ambient conditions. The sequences of linear oligo(monothioacetals) could be easily decoded via a tandem ESI-MS/MS technique, making them new kinds of digital macromolecules with a high data storage density (0.013 bit/Da). Moreover, star oligo(monothioacetals) could also be facilely generated through divergent and convergent strategies and their combination. An unprecedented sequence-defined miktoarm star oligo(monothioacetal) was obtained, which could serve as a new nonlinear digital macromolecule to achieve 2D information matrix encoding and hold great potential to be applied for information encryption, anticouterfeiting, secret communication, etc. Thus, this work provides a powerful stepwise iterative approach to facilely access sequence-defined linear and topological oligo(monothioacetals) for high-density data storage.

A Fischer-Type Ruthenium Carbene Complex as a Metathesis Catalyst for the Synthesis of Enol Ethers

The Grubbs G-I or G-II catalyst gives the ruthenium ethoxy carbene complex, which catalyzes ring-opening cross metathesis (ROCM) of a strained cyclic alkene to give a diene where one of the two alkene moieties in the product contains an ethoxy substituent. No polymeric products are detected. Hydrocarbons such as parent norbornene or substituted cyclopropenes can proceed with the reaction smoothly. Tertiary amines, N-alkylimides, esters, and aryl or alkyl bromides remain intact under the reaction conditions. In addition to vinyl ethers, vinylic esters can also be used. The time required to reach a 50% yield of the ROCM product t₅₀ varies from 0.01 to 140 h depending on the strain and nucleophilicity of the double bond. Anchimeric participation of an electron-rich group would result in significant enhancement of the reactivity, and the t₅₀ could be as short as several minutes. A similar substrate without such a neighboring group shows a much slower rate. An exo-norborne derivative reacts much faster than the corresponding endo-isomer. Alkenes with poor nucleophilicity are less favored for the ROCM process, so is less strained cyclooctene.

Near-Infrared Fluorescent Micelles from Poly(norbornene) Brush Triblock Copolymers for Nanotheranostics

This contribution describes the design and synthesis of multifunctional micelles based on amphiphilic brush block copolymers (BBCPs) for imaging and selective drug delivery of natural anticancer compounds. Well-defined BBCPs were synthesized via one-pot multi-step sequential grafting-through ring-opening metathesis polymerization (ROMP) of norbornene-based macroinitiators. The norbornenes employed contain a poly(ethylene glycol) methyl ether chain, an alkyl bromide chain, and/or a near-infrared (NIR) fluorescent cyanine dye. After block copolymerization, post-polymerization transformations using bromide-azide substitution, followed by the strain-promoted azide-alkyne cycloaddition (SPAAC) allowed for the functionalization of the BBCPs with the piplartine (PPT) moiety, a natural product with well-documented cytotoxicity against cancer cell lines, via an ester linker between the drug and the polymer side chain. The amphiphilic BBCPs self-assembled in aqueous media into nano-sized spherical micelles with neutral surface charges, as confirmed by dynamic light scattering analysis and transmission electron microscopy. During self-assembly, paclitaxel (PTX) could be effectively encapsulated into the hydrophobic core to form stable PTX-loaded micelles with high loading capacities and encapsulation efficiencies. The NIR fluorescent dye-containing micelles exhibited remarkable photophysical properties, excellent colloidal stability under physiological conditions, and a pH-induced disassembly under slightly acidic conditions, allowing for the release of the drug in a controlled manner. The in vitro studies demonstrated that the micelles without the drug (blank micelles) are biocompatible at concentrations of up to 1 mg mL^-1 and present a high cellular internalization capacity toward MCF-7 cancer cells. The drug-functionalized micelles showed in vitro cytotoxicity comparable to free PPT and PTX against MCF-7 and PC3 cancer cells, confirming efficient drug release into the tumor environment upon cellular internalization. Furthermore, the drug-functionalized micelles exhibited higher selectivity than the pristine drugs and preferential cellular uptake in human cancer cell lines (MCF-7 and PC3) when compared to the normal breast cell line (MCF10A). This study provides an efficient strategy for the development of versatile polymeric nanosystems for drug delivery and image-guided diagnostics. Notably, the easy functionalization of BBCP side chains via SPAAC opens up the possibility for the preparation of a library of multifunctional systems containing other drugs or functionalities, such as target groups for recognition.

Ring-Opening Metathesis Polymerization of a Macrobicyclic Olefin Bearing a Sacrificial Silyloxide Bridge

Ring-opening metathesis polymerization (ROMP) has been regarded as a powerful tool for sequence-controlled polymerization. However, the traditional entropy-driven ROMP of macrocyclic olefins suffers from the lack of ring strain and poor regioselectivity, whereas the relay-ring-closing metathesis polymerization inevitably brings some unnecessary auxiliary structure into each monomeric unit. We developed a macrobicyclic olefin system bearing a sacrificial silyloxide bridge on the α,β'-positions of the double bond as a new class of sequence-defined monomer for regioselective ROMP. The monomeric sequence information is implanted in the macro-ring, while the small ring, a 3-substituted cyclooctene structure with substantial ring tension, can provide not only narrow polydispersity, but also high regio-/stereospecificity. Besides, the silyloxide bridge can be sacrificially cleaved by desilylation and deoxygenation reactions to provide clean-structured, non-auxiliaried polymers.

Albumin Microspheres as "Trans-Ferry-Beads" for Easy Cell Passaging in Cell Culture Technology

Protein hydrogels represent ideal materials for advanced cell culture applications, including 3D-cultivation of even fastidious cells. Key properties of fully functional and, at the same time, economically successful cell culture materials are excellent biocompatibility and advanced fabrication processes allowing their easy production even on a large scale based on affordable compounds. Chemical crosslinking of bovine serum albumin (BSA) with N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (EDC) in a water-in-oil emulsion with isoparaffinic oil as the continuous phase and sorbitan monooleate as surfactant generates micro-meter-scale spherical particles. They allow a significant simplification of an indispensable and laborious step in traditional cell culture workflows. This cell passaging (or splitting) to fresh culture vessels/flasks conventionally requires harsh trypsinization, which can be omitted by using the “trans-ferry-beads” presented here. When added to different pre-cultivated adherent cell lines, the beads are efficiently boarded by cells as passengers and can be easily transferred afterward for the embarkment of novel flasks. After this procedure, cells are perfectly viable and show normal growth behavior. Thus, the trans-ferry-beads not only may become extremely affordable as a final product but also may generally replace trypsinization in conventional cell culture, thereby opening new routes for the establishment of optimized and resource-efficient workflows in biological and medical cell culture laboratories.

Oxanorbornenes: promising new single addition monomers for the metathesis polymerization

Higher ring-opening metathesis propagation rates of exo-norbornene derivatives over endo derivatives are well established in the literature. Here, we report for the first time that endo-isomers of oxanorbornene derivatives show higher reactivity towards ring-opening metathesis with Grubbs' 3rd generation catalyst (G3) than the corresponding exo-isomers. A very high selectivity for the reaction of G3 with endo over the exo-isomers could be shown. Furthermore, single molecular addition of the endo-isomers with G3 was observed. On the other hand, pure exo-monomers could successfully be homopolymerized. Mixtures of exo- and endo- monomers, however, prevented the homopolymerization of the exo-monomer. Such mixtures could successfully be copolymerized with cycloalkenes, resulting in alternating copolymers. An oxanorbornadiene derivative could be shown to undergo single addition reactions, exploited in the preparation of mono-end functional ROMP polymers. These could be selectively derivatized via endgroup selective thiol-ene click reactions. A thiol and alcohol end functional ROMP polymer was synthesized, and the efficient end functionalization was confirmed by 1H NMR spectroscopy and MALDI-ToF spectrometry.

Ring-Opening Metathesis Polymerization of Norbornene-Based Monomers Obtained via the Passerini Three Component Reaction

Ring-opening metathesis polymerization is a robust method to synthesize a variety of polymers by using ring-strained molecules as monomers, e.g., norbornenes. However, the synthesis of monomers with multiple functional groups remains a challenge, albeit peptide functional norbornenes have previously been used. Here, the Passerini three component reaction is exploited to synthesize norbornenes with two variable functional groups varying in bulkiness and distance from the polymerizable alkene. The results indicate that the functional groups do not affect the kinetics of the polymerization, whereas the length of the linker has a minor effect. Furthermore, a diblock-type copolymer is synthesized in a one-pot fashion, also indicating good control of the polymerization process. The thermal properties of all polymers are evaluated, highlighting the effect of monomer composition. This synthetic approach can be transferred to a variety of compounds, thus promising highly diverse polymers with complex compositions and architectures.

'Sacrificial' supramolecular assembly and pressure-induced polymerization: toward sequence-defined functionalized nanothreads

Limited supramolecular strategies have been utilized to synthesize sequence-defined polymers, despite the prominence of noncovalent interactions in materials design. Herein, we illustrate the utility of ‘sacrificial’ aryl-perfluoroaryl supramolecular synthons to synthesize sp³-hybridized nanothreads from sp²-enriched reactants. Our strategy features A–B reactant pairs in the form of a phenol:pentafluorophenol co-crystal that is preorganized for an electronically-biased and sequence-defined polymerization. The polymerization, initiated at 12 GPa, affords an alternating copolymer featuring exogenous –OH functionalities. The external substitution is confirmed through IR spectroscopy. Importantly, the inclusion of the functional unit provides the first experimental glimpse at reaction mechanism: keto–enol tautomerization that can only occur during cycloaddition is observed through IR spectroscopy. Our approach realizes the first example of a functionalized nanothread and attains sequence definition through sacrificial supramolecular preorganization and presents a further approach for de novo design of complex nanothreads.

Supramolecular synthons are exploited to synthesize –OH functionalized sp³-rich sequence-defined nanothreads using pressure-induced polymerization of a phenol:pentafluorophenol co-crystal.

Electronically Governed ROMP: Expanding Sequence Control for Donor–Acceptor Conjugated Polymers

Controlling the primary sequence of synthetic polymers remains a grand challenge in chemistry. A variety of methods that exert control over monomer sequence have been realized wherein differential reactivity, pre-organization, and stimuli-response have been key factors in programming sequence. Whereas much has been established in nonconjugated systems, π-extended frameworks remain systems wherein subtle structural changes influence bulk properties. The recent introduction of electronically biased ring-opening metathesis polymerization (ROMP) extends the repertoire of feasible approaches to prescribe donor–acceptor sequences in conjugated polymers, by enabling a system to achieve both low dispersity and controlled polymer sequences. Herein, we discuss recent advances in obtaining well-defined (i.e., low dispersity) polymers featuring donor–acceptor sequence control, and present our design of an electronically ambiguous (4-methoxy-1-(2-ethylhexyloxy) and benzothiadiazole-(donor–acceptor-)based [2.2]paracyclophanediene monomer that undergoes electronically dictated ROMP. The resultant donor–acceptor polymers were well-defined (Đ = 1.2, Mn > 20 k) and exhibited lower energy excitation and emission in comparison to ‘sequence-ill-defined’ polymers. Electronically driven ROMP expands on prior synthetic methods to attain sequence control, while providing a promising platform for further interrogation of polymer sequence and resultant properties.

1 Introduction to Sequence Control

2 Sequence Control in Polymers

3 Multistep-Synthesis-Driven Sequence Control

4 Catalyst-Dictated Sequence Control

5 Electronically Governed Sequence Control

6 Conclusions

100th Anniversary of Macromolecular Science Viewpoint: Opportunities in the Physics of Sequence-Defined Polymers

Polymer science has been driven by ever-increasing molecular complexity, as polymer synthesis expands an already-vast palette of chemical and architectural parameter space. Copolymers represent a key example, where simple homopolymers have given rise to random, alternating, gradient, and block copolymers. Polymer physics has provided the insight needed to explore this monomer sequence parameter space. The future of polymer science, however, must contend with further increases in monomer precision, as this class of macromolecules moves ever closer to the sequence-monodisperse polymers that are the workhorses of biology. The advent of sequence-defined polymers gives rise to opportunities for material design, with increasing levels of chemical information being incorporated into long-chain molecules; however, this also raises questions that polymer physics must address. What properties uniquely emerge from sequence-definition? Is this circumstance-dependent? How do we define and think about sequence dispersity? How do we think about a hierarchy of sequence effects? Are more sophisticated characterization methods, as well as theoretical and computational tools, needed to understand this class of macromolecules? The answers to these questions touch on many difficult scientific challenges, setting the stage for a rich future for sequence-defined polymers in polymer physics.

Phenanthroline-Based Polyarylate Porous Membranes with Rapid Water Transport for Metal Cation Separation

The selective separation of ions in terms of extremely similar size and properties remains an important challenge in water purification. We innovated a kind of porous nanofilm via interfacial polymerization using rigid heterocyclic ligands to achieve high valent cation selectivity and rapid water/ion transport. The interconnected microporosity and uniformly distributed cation-affinitive sites of the ultrathin membranes enabled water permeation (7.5 L m^-2 h^-1 bar^-1), ion permeance of Na⁺ (1.5 mol m^-2 h^-1 bar^-1), and Mg²⁺/Na⁺ permselectivity (2.1) during nanofiltration. The forward osmosis exhibited a prominent water flux of 95 LMH at 1 M NaCl draw solution, which expanded various applications. The polyarylate membranes comprising 4,7-diphenyl-1,10-phenanthroline showed a higher water permeation and ion selectivity than the planar monomers, e.g., resorcinol. A distinct fluorescence responsiveness existed between membranes and cations for the interaction characterization. Host-guest nuclear magnetic resonance (NMR) spectroscopy and solid-state nuclear magnetic resonance spectroscopy characterized the preferential affinitive of divalent/high-valent cations in the interconnected microporous powders; an ultraviolet spectrophotometer characterized the light responsiveness of the porous nanofilms. Such an active membrane has potential applications in selective separation and adsorption of cations, photocatalytic materials, photosensors, and other fields.

Mechanistic and Kinetic Studies of the Ring Opening Metathesis Polymerization of Norbornenyl Monomers by a Grubbs Third Generation Catalyst

The mechanism of ring-opening metathesis polymerization (ROMP) for a set of functionalized norbornenyl monomers initiated by a Grubbs third generation precatalyst [(H₂IMes)(pyr)₂(Cl)₂Ru═CHPh] was investigated. Through a series of ¹²C/¹³C and ¹H/²H kinetic isotope effect studies, the rate-determining step for the polymerization was determined to be the formation of the metallacyclobutane ring. This experimental result was further validated through DFT calculations showing that the highest energy transition state is metallacyclobutane formation. The effect of monomer stereochemistry (exo vs endo) of two types of ester substituted monomers was also investigated. Kinetic and spectroscopic evidence supporting the formation of a six-membered chelate through coordination of the proximal polymer ester to the Ru center is presented. This chelation and its impact on the rate of polymerization are shown to vary based on the monomer employed and its stereochemistry. The combination of this knowledge led to the derivation of a generic rate law describing the rate of polymerization of norbornene monomers initiated by a Grubbs third generation catalyst.

Selective ring-opening metathesis polymerization (ROMP) of cyclobutenes. Unsymmetrical ladderphane containing polycyclobutene and polynorbornene strands

At 0 °C in THF in the presence of Grubbs first generation catalyst, cyclobutene derivatives undergo ROMP readily, whereas norbornene derivatives remain intact. When the substrate contains both cyclobutene and norbornene moieties, the conditions using THF as the solvent at 0 °C offer a useful protocol for the selective ROMP of cyclobutene to give norbornene-appended polycyclobutene. Unsymmetrical ladderphane having polycyclobutene and polynorbornene as two strands is obtained by further ROMP of the norbornene appended polycyclobutene in the presence of Grubbs first generation catalyst in DCM at ambient temperature. Methanolysis of this unsymmetrical ladderphane gives polycyclobutene methyl ester and insoluble polynorbornene-amide-alcohol. The latter is converted into the corresponding soluble acetate. Both polymers are well characterized by spectroscopic means. No norbornene moiety is found to be incorporated into polycyclobutene strand at all. The double bonds in the polycyclobutene strand are mainly in cis configuration (ca 70%), whereas the E/Z ratio for polynorbornene strand is 8:1.

Time-dependent FTIR microscopy for mechanism investigations and kinetic measurements in interfacial polymerisation: a microporous polymer film study

The real-time characterisation of interfacial polymerization is demonstrated by using FTIR-mapping spectroscopy with microscopy to deduce the reaction kinetics.

One-Shot Synthesis and Melt Self-Assembly of Bottlebrush Copolymers with a Gradient Compositional Profile

Morphological control plays a central role in soft materials design. Herein, we report the synthesis of a gradient bottlebrush architecture and its role in directing molecular packing in the solid state. Bottlebrush copolymers with gradient interfaces were prepared via one-shot ring-opening metathesis polymerization of exo- and endo-norbornene-capped macromonomers. Kinetic studies revealed a gradient compositional profile separating the two blocks along the backbone. Side-chain symmetric gradient bottlebrush copolymers exhibited a strong tendency to assemble into cylindrical microstructures, in contrast to their block copolymer analogs with sharp interfaces. Such exquisite architectural control of the interfacial composition affords a delicate handle to direct macromolecular assembly.

Synthesis of copolymers with an exact alternating sequence using the cationic polymerization of pre-sequenced monomers

Alternating copolymers of styrene/methyl vinyl ether and styrene/vinyl alcohol were synthesized. The effect of an alternating sequence on the fluorescence emissions of the products was investigated.

Sequence-definition from controlled polymerization: the next generation of materials

An overview is given on the state-of-the-art in synthesis of sequence-controlled and sequence-defined oligomers and polymers.

Design, Synthesis, and Self-Assembly of Polymers with Tailored Graft Distributions

Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl comonomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants over 2 orders of magnitude (0.36 M^-1 s^-1 < k_homo < 82 M^-1 s^-1). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building on this foundation, complex architectures were achieved through copolymerizations of selected diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromonomer. The cross-propagation rate constants were obtained by nonlinear least-squares fitting of the instantaneous comonomer concentrations according to the Mayo-Lewis terminal model. In-depth kinetic analyses indicate a wide range of accessible macromonomer/diluent reactivity ratios (0.08 < r₁/r₂ < 20), corresponding to blocky, gradient, or random backbone sequences. We further demonstrated the versatility of this copolymerization approach by synthesizing AB graft diblock polymers with tapered, uniform, and inverse-tapered molecular "shapes." Small-angle X-ray scattering analysis of the self-assembled structures illustrates effects of the graft distribution on the domain spacing and backbone conformation. Collectively, the insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures. Controlled copolymerization therefore expands the parameter space for molecular and materials design.

Regioregular Alternating Polyampholytes Have Enhanced Biomimetic Ice Recrystallization Activity Compared to Random Copolymers and the Role of Side Chain versus Main Chain Hydrophobicity

Antifreeze proteins from polar fish species are potent ice recrystallization inhibitors (IRIs) effectively stopping all ice growth. Additives that have IRI activity have been shown to enhance cellular cryopreservation with potential to improve the distribution of donor cells and tissue. Polyampholytes, polymers with both anionic and cationic side chains, are a rapidly emerging class of polymer cryoprotectants, but their mode of action and the structural features essential for activity are not clear. Here regioregular polyampholytes are synthesized from maleic anhydride copolymers to enable stoichiometric installation of the charged groups, ensuring regioregularity, which is not possible using conventional random copolymerization. A modular synthetic strategy is employed to enable the backbone and side chain hydrophobicity to be varied, with side chain hydrophobicity found to have a profound effect on the IRI activity. The activity of the regioregular polymers was found to be superior to those derived from a standard random copolymerization with statistical incorporation of monomers, demonstrating that sequence composition is crucial to the activity of IRI active polyampholytes.

The limits of precision monomer placement in chain growth polymerization

Precise control over the location of monomers in a polymer chain has been described as the ‘Holy Grail' of polymer synthesis. Controlled chain growth polymerization techniques have brought this goal closer, allowing the preparation of multiblock copolymers with ordered sequences of functional monomers. Such structures have promising applications ranging from medicine to materials engineering. Here we show, however, that the statistical nature of chain growth polymerization places strong limits on the control that can be obtained. We demonstrate that monomer locations are distributed according to surprisingly simple laws related to the Poisson or beta distributions. The degree of control is quantified in terms of the yield of the desired structure and the standard deviation of the appropriate distribution, allowing comparison between different synthetic techniques. This analysis establishes experimental requirements for the design of polymeric chains with controlled sequence of functionalities, which balance precise control of structure with simplicity of synthesis.

Chemists increasingly seek to control monomer sequencing in aperiodic copolymers. Here, the authors show that the statistical nature of chain growth strongly limits the achievable control, and establish parameters for polymer design that balance precise control with simplicity of synthesis.

Modular Design of Poly(norbornenes) for Organelle-Specific Imaging in Tumor Cells

Through modular ROMP (ring-opening metathesis polymerization) directly from monomeric norbornenes of bioactive peptides, rhodamine B chromophore, and PEG solubilizer, we designed and synthesized a series of water-soluble poly(norbornenes) with organelle-specific imaging capability in tumor cells. For the selection of FxrFxK, TAT, and SV40 peptide sequences, these fluorescence probes exhibited different targeting specificity toward mitochondria, lysosome, and nucleolus, respectively, based on the same poly(norbornene) backbonds. More importantly, the ROMP strategy enables selective combination from various monomers and allows programmable biofunctionalization via peptide sequence permutations, which would greatly extend the biomedical applications such as imaging, diagnosis, and therapy for these synthetic polymers.

Switchable two-photon imaging of RGD-functionalized polynorbornenes with enhanced cellular uptake in living cells

Two-photon imaging polynorbornenes were fabricated directly from photochromic spiropyran, RGD peptides and hydrophilic PEG monomers via modular ROMP.