Induction and Stabilization of Columnar Mesophases in Fluorinated Polycyclic Aromatic Hydrocarbons by Arene-Perfluoroarene Interactions

The straightforward synthesis of several Fluorinated Polycyclic Aromatic Hydrocarbons by the efficient, transition-metal-free, arene fluorine nucleophilic substitution reaction is described, and the full investigation of their liquid crystalline and optical properties reported. The key precursors for this study, i. e. 2,2'-dilithio-4,4',5,5'-tetraalkoxy-1,1'-biphenyl derivatives, were obtained in two steps from the highly selective Scholl oxidative homo-coupling of 3,4-dialkoxy-1-bromobenzene, followed by quantitative double-lithiation. In situ room temperature nucleophilic annulation with either perfluorobenzene or perfluoronaphthalene leads to 1,2,3,4-tetrafluoro-6,7,10,11-tetraalkxoytriphenylenes and 9,10,11,12,13,14-hexafluoro-2,3,6,7-tetraalkoxybenzo[f]tetraphenes, respectively, in good yields. Exploiting the same strategy, subsequent double annulations resulted in the formation of 9,18-difluoro-2,3,6,7,11,12,15,16-octa(alkoxy)tribenzo[f,k,m]tetraphenes and 9,10,19,20-tetrafluoro-2,3,6,7,12,13,16,17-octakis(hexyloxy)tetrabenzo[a,c,j,l]tetracenes, respectively. Despite the presence of only four alkoxy chains, the polar "Janus" mesogens display a columnar hexagonal mesophase over broad temperature ranges, with higher mesophase stability than the archetypical 2,3,6,7,10,11-hexa(alkoxy)triphenylenes and their hydrogenated counterparts. The improvement or induction of mesomorphism is attributed to efficient antiparallel face-to-face π-stacking driven by the establishment of non-covalent perfluoroarene-arene intermolecular interactions. The larger lipophilic discotic π-extended compounds also exhibit columnar mesomorphism, over similar temperature ranges and stability than their hydrogenated homologs. Finally, these fluorinated molecules form stringy gels in various solvents, and show interesting solvatochromic emission properties in solution as well as strong emission in thin films and gels.

Precise peripheral design enables propeller-like squaraine dye with highly sensitive and wide-range piezochromism

Piezochromic fluorescent (PCF) materials that feature high sensitivity and wide-range switching are attractive in intelligent optoelectronic applications but their fabrication remains a significant challenge. Here we present a propeller-like squaraine dye SQ-NMe₂ decorated with four peripheral dimethylamines acting as electron donors and spatial obstacles. This precise peripheral design is expected to loosen the molecular packing pattern and facilitate more substantial intramolecular charge transfer (ICT) switching caused by conformational planarization under mechanical stimuli. As such, the pristine SQ-NMe₂ microcrystal exhibits significant fluorescence changes from yellow (λ_em = 554 nm) to orange (λ_em = 590 nm) upon slight mechanical grinding and further to deep red (λ_em = 648 nm) upon heavy mechanical grinding. Single-crystal X-ray diffraction structural analysis of two SQ-NMe₂ polymorphs provides direct evidence to illustrate the design concept of such a piezochromic molecule. The piezochromic behavior of SQ-NMe₂ microcrystals is sensitive, high-contrast, and easily reversible, enabling cryptographic applications.

Self-assembled organic and hybrid materials derived from oligo-(p-phenyleneethynylenes)

Oligo-(p-Phenyleneethynylenes) (OPEs) have garnered widespread interest over the past three decades due to their excellent opto-electronic properties. However, the chief focus has been on the use of mainly small molecules or polymeric systems for the study of their structural diversity in opto-electronic applications. Recently, researchers have started delving deeper into their utility in material applications. Purely organic materials such as supramolecular polymers, self-assembled nanostructures, nanostructured organogels and single-crystalline materials derived from OPEs have already been developed and researched. Chirality has also been introduced into these systems. Additionally, these have shown physical properties such as polymorphism, liquid crystallinity, melt formation, mechanochromism, etc. All these materials have also shown excellent luminescence properties with high quantum yield and some have even shown energy harvesting properties. There have also been sporadic reports on OPE linker based hybrid systems such as metallogels and metal-organic framework (MOF) structures where structural analysis reveals the origin of tunable emission in these materials. Furthermore, by innovative structural design, unexplored properties of OPEs such as water repellency, bioimaging, drug delivery, photocatalysis, energy transfer, nanomorphology control, photoconductivity, and colour tunability could be achieved. This feature article will, therefore, encompass a detailed discussion on the development of this field as well as the analysis of the properties realized in OPE derived self-assembled supramolecular materials. The main focus will be on the following classes of materials: soft supramolecular materials, crystalline supramolecular π-systems, nanoscale metal-organic frameworks (NMOFs) and bulk metal-organic frameworks (MOFs) and how their application horizon has been expanded by integrating OPEs into their structures.

Arene-Perfluoroarene Interactions in Solution

A systematic study of arene-perfluoroarene interactions in solution is presented. Using a combination of NMR titration experiments, X-ray crystallography, and computational analysis, we analyze the effects of fluorination, substituents, ring size, and solvation on the arene-perfluoroarene interaction. We find that fluorination, extension of the π systems, and enhancement of solvent polarity greatly stabilize the stacking energy up to 3 orders of magnitude (K_a = <1 to 6000 M^-1), with the highest K_a achieved for the interaction of water-soluble variants of perfluoronaphthalene and anthracene in buffered D₂O (pD = 12). Combining computational and experimental results, we conclude that this impressive binding energy is a result of enthalpically favorable electrostatic and dispersion interactions as well as the entropically driven hydrophobic effect. The enhanced understanding of arene-perfluoroarene interactions in aqueous solution sets the stage for the implementation of this abiotic intermolecular interaction in biology and medicine.

Turning on solid-state phosphorescence of platinum acetylides with aromatic stacking

Neat solids that phosphoresce under ambient conditions are rare due to aggregation-caused quenching. This communication describes a platinum acetylide (PtPE) that phosphoresces as a solid due to programmed aromatic stacking interactions of pendant groups that prevent intermolecular aggregation.

Host-Enhanced Phenyl-Perfluorophenyl Polar-π Interactions

Phenyl-perfluorophenyl polar-π interactions have been revisited for the design and fabrication of functional supramolecular systems. The relatively weak associative interactions (ΔG ≈ -1.0 kcal/mol) have limited their use in aqueous self-assembly to date. Herein, we propose a strategy to strengthen phenyl-perfluorophenyl polar-π interactions by encapsulation within a synthetic host, thus increasing the binding affinity to ΔG= -15.5 kcal/mol upon formation of heteroternary complexes through social self-sorting. These heteroternary complexes were used as dynamic, yet strong, cross-linkers in the fabrication of supramolecular gels, which exhibited excellent viscoelasticity, stretchability, self-recovery, self-healing, and energy dissipation. This work unveils a general approach to exploit host-enhanced polar-π interactions in the design of robust aqueous supramolecular systems.

Synthesis and investigation of the photophysical, electrochemical and theoretical properties of phenazine–amine based cyan blue-red fluorescent materials for organic electronics

We report a study of the effect of modulating the donor system fused with a central phenazine core to understand the tuning of the optoelectrochemical properties in the designed phenazine–amine derivatives.

Directed Polymorphism and Mechanofluorochromism of Conjugated Materials through Weak Non-Covalent Control

Understanding and manipulating crystal polymorphism can provide novel strategies for materials discovery in organic optoelectronics. In this paper, a series of seven ester-terminated three-ring phenylene ethynylenes (PEs) exhibit structure-dependent polymorphism wherein alkyl chain length modulates the propensity to form violet or green fluorescent solid phases, as well as tunable thermal and mechanofluorochromic (MFC) transitions. These compounds harness "soft" non-covalent control to achieve polymorphism: the electronic substituent effect of the ester groups weakens the fluoroarene-arene (ArF-ArH) interactions that typically direct crystal packing of this class of compounds, increasing competitiveness of other interactions. Small structural modifications tip this balance and shift the prevalence of violet- or green-emitting polymorphs. Compounds with short alkyl chain lengths show both violet and various green fluorescent polymorphs, while the violet fluorescent form dominates with alkyl lengths longer than butyl. Further, thermally induced green-to-violet fluorescent crystal-to-crystal transitions occur for single crystals of CO2-1 and CO2-3. Finally, the PEs show reversible violet-to-green mechanofluorochromism (MFC), with temperature required for reversion of this MFC decreasing with alkyl chain length. We therefore present this design of directional but weak interactions as a strategy to access polymorphs and tunable stimuli-responsive behavior in solids.

Small Changes With Big Consequences: Swapping Two Atoms In Side Chains Changes Phenylene-Ethynylene Packing And Fluorescence

Engineering the properties of conjugated materials in the solid state is an unsolved, ongoing challenge important to fundamental understanding of how non-covalent interactions dictate packing and key properties, as well as the development of technologies based in organic optoelectronics. The most common design paradigm of such materials divide them into a "main chain" with extended conjugation, the chemical structure of which determines optoelectronic properties, and "side chains" not conjugated to the backbone, which provide solubility when they are long alkyl chains. This paper describes comparisons between phenylene-ethynylene molecules in which slight changes to the structure of "side chains"-swapping hydrogen and fluorine atomic position on an aromatic ring-results in unexpectedly large changes in the solid-state optical properties. In a pair of anisyl-terminated three-ring phenylene-ethynylenes, switching the side chain arenes of benzyl esters from 2,4,6-trifluoro to 2,3,6-trifluoro results in a shift in fluorescence emission spectra of over 100 nm, as well as the opposite direction of force-induced shifting of emission. Through a combination X-ray crystal structures, electronic structure calculations, and comparisons with other derivatives, we describe how the 2,4,6-trifluorinated side chains yield cofacial fluoroarene-arene stacking interactions that twist the PE backbone out of conjugation, while the 2,3,6-trifluoro side chains do not stack, instead yielding more coplanar PE backbones that form intermolecular aggregates. Overall, this work demonstrates how slight modifications to parts of conjugated materials normally considered ancillary to optoelectronic properties can determine their solid-state properties, epitomizing the challenge of rational design but at the same time offering opportunities for materials discovery and improved understanding of non-covalent interactions.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

Reversible mechanofluorochromism of aniline-terminated phenylene ethynylenes

Seven three-ring phenylene-ethynylene (PE) structural analogs, differing only in the lengths of alkyl chains on terminal aniline substituents, show 50-62 nm bathochromic shifts in emission maxima in response to mechanical force (mechanofluorochromism, MC). These shifts are fully reversible with heat or solvent fuming. Shearing of these solids yields a transition from green-emitting crystalline phases to orange-emitting amorphous phases as established by differential scanning calorimetry and X-ray diffraction. Molecules with shorter alkyl chain lengths required higher temperatures to recover the hypsochromically shifted crystalline phases after grinding, while the recovery with chain lengths longer than butyl occurred at room temperature. In addition to this structure-dependent thermochromism, these compounds retain their MC properties in polymer hosts to various extents. The crystalline phases of these materials have PE chromophores that are twisted due to non-covalent perfluoroarene-arene (ArF-ArH) interactions involving perfluorophenyl pendants and the terminal rings of the PE chromophore, resulting in interrupted conjugation and an absence of chromophore aggregation. The MC behavior of an analog without the perfluoroarene rings is severely attenuated. This work demonstrates the general utility of twisted PEs as stimuli-responsive moieties and reveals clear structure-property relationships regarding the effects of alkyl chain length on these materials.

Ligation-Enhanced π-Hole···π Interactions Involving Isocyanides: Effect of π-Hole···π Noncovalent Bonding on Conformational Stabilization of Acyclic Diaminocarbene Ligands

The reaction of cis-[PdCl₂(CNXyl)₂] (Xyl = 2,6-Me₂C₆H₃) with the aminoazoles [1 H-imidazol-2-amine (1), 4 H-1,2,4-triazol-3-amine (2), 1 H-tetrazol-5-amine (3), 1 H-benzimidazol-2-amine (4), 1-alkyl-1 H-benzimidazol-2-amines, where alkyl = Me (5), Et (6)] in a 2:1 ratio in the presence of a base in CHCl₃ at RT proceeds regioselectively and leads to the binuclear diaminocarbene complexes [(ClPdCNXyl)₂{μ-C(N-azolyl)N(Xyl)C═NXyl}] (7-12; 73-91%). Compounds 7-12 were characterized by C, H, N elemental analyses, high-resolution ESI⁺-MS, Fourier transform infrared spectroscopy, 1D (¹H, ¹³C) and 2D (¹H,¹H-COSY, ¹H,¹H-NOESY, ¹H,¹³C-HSQC, ¹H,¹³C-HMBC) NMR spectroscopies, and X-ray diffraction (XRDn). Inspection of the XRDn data and results of the Hirshfeld surface analysis suggest the presence in all six structures of intramolecular π-hole_isocyanide···π_arene interactions between the electrophilic C atom of the isocyanide moiety and the neighboring arene ring. These interactions also result in distortion of the Pd-C≡N-Xyl fragment from the linearity. Results of density functional theory calculations [M06/MWB28 (Pd) and 6-31G* (other atoms) level of theory] for model structures of 7-9 followed by the topological analysis of the electron density distribution within the framework of Bader's theory (QTAIM method) reveal the presence of these weak interactions also in a CHCl₃ solution, and their calculated strength is 1.9-2.2 kcal/mol. The natural bond orbital analysis of 7-9 revealed that π(C-C)Xyl → π*(C-N)isocyanide charge transfer (CT) takes place along with the intramolecular π-hole_isocyanide···π_arene interactions. The observed π(C-C)_Xyl → π*(C-N)_isocyanide CT is due to ligation of the isocyanide to the metal center, whereas in the cases of the uncomplexed p-CNC₆H₄NC and CNXyl species, the effects of CT are negligible. Available CCDC data were processed from the perspective of isocyanide-involving π-hole···π interactions, disclosed the role of metal coordination in the π-hole donor ability of isocyanides, and verified the π-hole_isocyanide···π_arene interaction effect on the stabilization of the in-conformation in metal-bound acyclic diaminocarbenes.

Developing the structure-property relationship to design solid state multi-stimuli responsive materials and their potential applications in different fields

Establishing the structure–property relationship for multi-stimuli responsive mechanochromic materials based on charge transfer luminogens.

Prediction of multi-stimuli responsive behavior in newly developed luminogens is an appealing yet challenging puzzle, since no concrete design strategy has been developed so far. In this article, we demonstrate a potent strategy to gain a deep understanding of the structure–property relationship to design multi-stimuli responsive mechanochromic materials. To achieve our goal, a variety of new isoindolinone core based charge transfer luminogens exhibiting aggregation-induced emission (AIE) have been prepared through C–H bond activation using a cost-effective ruthenium (Ru) metal catalyzed one-pot synthetic strategy. We have shown that slight tuning of the donor moiety is found to be highly effective in controlling molecular packing and metastable energy states in solid states, and thus, optical properties and multi-stimuli responsive behaviors. The flexibility and twisting of donor moieties afford a loosely bound ‘herringbone’ packing, enabling reversible transformation under multiple mechanical stimuli. The cyclized derivative of the donor exhibits a completely different packing mode (i.e., cross packing), and subsequently, does not give rise to mechanochromism. The Hirshfeld surface analysis from a single crystal infers that non-covalent interactions (specifically C–H···π and π···π) are extremely important to yield mechanochromism under external force. Correlating all solid-state behavior with the molecular structure, we conclude that the synergistic effect between the twisting and conformational flexibility of donor moieties along with numerous non-covalent interactions gives rise to multi-stimuli responsive behaviors. Finally, the newly designed molecules are found to be highly emissive in solution and potentially applicable in fluorescence thermometer construction, lighting up cells, acid–base sensors and rewritable devices.

Synthesis of tunable, red fluorescent aggregation-enhanced emissive organic fluorophores: stimuli-responsive high contrast off–on fluorescence switching

Molecular conformation controlled tunable and stimuli-responsive off–on fluorescence switching.

Synthesis of azulene-substituted benzofurans and isocoumarins via intramolecular cyclization of 1-ethynylazulenes, and their structural and optical properties

The preparation of azulene-substituted benzofurans and isocoumarins was established by two types of intramolecular cyclization reaction of 1-ethynylazulenes.

Planarizable Push-Pull Probes: Overtwisted Flipper Mechanophores

Planarizable push-pull fluorescent probes, also referred to as flipper probes, have been introduced as conceptually innovative mechanophores that report on forces in their local environment in lipid bilayer membranes. The best flipper probes respond to a change from liquid disordered to solid ordered membranes with a red shift in excitation of 50-90 nm. A simultaneous increase in fluorescence lifetime and negligible background fluorescence from the aqueous phase qualifies these fluorescent probes for meaningful imaging in live cells. Here, we report that the replacement of methyl with isobutyl substituents along the scaffold of a dithienothiophene dimer strongly reduces fluorescence intensity but increases solvatochromism slightly. These trends imply that the large substituents in "leucine flippers" hinder the planarization in the first excited state to result in twisted intramolecular charge transfer (TICT). As a result of this overtwisting, the leucine flippers form interesting fluorescent micelles in water but fail to respond to changes in membrane order. These dramatic changes in function provide one of the most impressive illustrations for the hypersensitivity of fluorescent membrane probes toward small changes in their structure.

An unprecedented amplification of near-infrared emission in a Bodipy derived π-system by stress or gelation

A meso-substituted Bodipy derived π-gelator exhibits amplified near-infrared (NIR) emission upon shearing of its film from n-decane or drying of its gel from DMSO.

We report an unprecedented strategy to generate and amplify near-infrared (NIR) emission in an organic chromophore by mechanical stress or gelation pathways. A greenish-yellow emitting film of π-extended Bodipy-1, obtained from n-decane, became orange-red upon mechanical shearing, with a 15-fold enhancement in NIR emission at 738 nm. Alternatively, a DMSO gel of Bodipy-1 exhibited a 7-fold enhancement in NIR emission at 748 nm with a change in emission color from yellow to orange-red upon drying. The reason for the amplified NIR emission in both cases is established from the difference in chromophore packing, by single crystal analysis of a model compound (Bodipy-2), which also exhibited a near identical emission spectrum with red to NIR emission (742 nm). Comparison of the emission features and WAXS and FT-IR data of the sheared n-decane film and the DMSO xerogel with the single crystal data supports a head-to-tail slipped arrangement driven by the N–H···F–B bonding in the sheared or xerogel states, which facilitates strong exciton coupling and the resultant NIR emission.

Substituent Effects That Control Conjugated Oligomer Conformation through Non-covalent Interactions

Although understanding the conformations and arrangements of conjugated materials as solids is key to their prospective applications, predictive power over these structural factors remains elusive. In this work, substituent effects tune non-covalent interactions between side-chain fluorinated benzyl esters and main-chain terminal arenes, in turn controlling the conformations and interchromophore aggregation of three-ring phenylene-ethynylenes (PEs). Cofacial fluoroarene-arene (ArF-ArH) interactions cause twisting in the PE backbone, interrupting intramolecular conjugation as well as blocking chromophore aggregation, both of which prevent the typically observed bathochromic shift observed upon transitioning PEs from solution to solid. This work highlights two structural factors that determine whether the ArF-ArH interactions, and the resulting twisted, unaggregated chromophores, occur in these solids: (i) the electron-releasing characteristic of substituents on ArH, with more electron-releasing character favoring ArF-ArH interactions, and (ii) the fluorination pattern of the ArF ring, with 2,3,4,5,6-pentafluorophenyl favoring ArF-ArH interactions over 2,4,6-trifluorophenyl. These trends indicate that considerations of electrostatic complementarity, whether through a polar-π or substituent-substituent mechanism, can serve as an effective design principle in controlling the interaction strengths, and therefore the optoelectronic properties, of these molecules as solids.

Crystallization-induced reversible fluorescence switching of alkyl chain length dependent thermally stable supercooled organic fluorescent liquids

Triphenylamine fluorophore-produced alkyl chain length dependent stable fluorescent liquids and their crystallization-induced reversible fluorescence switching.

Piezochromism and hydrochromism through electron transfer: new stories for viologen materials

A pyridinium-carboxylate compound undergoes reversible color change under pressure owing to the formation of radicals via electron transfer; dehydration and hydration can also trigger electron transfer.

While viologen derivatives have long been known for electrochromism and photochromism, here we demonstrated that a viologen-carboxylate zwitterionic molecule in the crystalline state exhibits piezochromic and hydrochromic behaviors. The yellow crystal undergoes a reversible color change to red under high pressure, to green after decompression, and finally back to yellow upon standing at ambient pressure. Ultraviolet-visible spectroscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance X-ray diffraction and DFT calculations suggested that the piezochromism is due to the formation of radicals via pressure-induced electron transfer from carboxylate to pyridinium, without a crystallographic phase transition. It was proposed that electron transfer is induced by pressure-forced reduction of intermolecular donor–acceptor contacts. The electron transfer can also be induced by dehydration, which gives a stable green anhydrous radical phase. The color change is reversible upon reabsorption of water, which triggers reverse electron transfer. The compound not only demonstrates new chromic phenomena for viologen compounds, but also represents the first example of organic mechanochromism and hydrochromism associated with radical formation via electron transfer.

Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials

The possibility to change the molecular assembled structures of organic and organometallic materials through mechanical stimulation is emerging as a general and powerful concept for the design of functional materials. In particular, the photophysical properties such as photoluminescence color, quantum yield, and emission lifetime of organic and organometallic fluorophores can significantly depend on the molecular packing, enabling the development of molecular materials with mechanoresponsive luminescence characteristics. Indeed, an increasing number of studies have shown in recent years that mechanical force can be utilized to change the molecular arrangement, and thereby the optical response, of luminescent molecular assemblies of π-conjugated organic or organometallic molecules. Here, the development of such mechanoresponsive luminescent (MRL) molecular assemblies consisting of organic or organometallic molecules is reviewed and emerging trends in this research field are summarized. After a brief introduction of mechanoresponsive luminescence observed in molecular assemblies, the concept of "luminescent molecular domino" is introduced, before molecular materials that show turn-on/off of photoluminescence in response to mechanical stimulation are reviewed. Mechanically stimulated multicolor changes and water-soluble MRL materials are also highlighted and approaches that combine the concept of MRL molecular assemblies with other materials types are presented in the last part of this progress report.

Pyrene boronic acid cyclic ester: a new fast self-recovering mechanoluminescent material at room temperature

Pyrene boronic acid cyclic ester with a 5-membered ring possesses reversible mechano-luminescence behaviour with a fast self-recovering ability at room temperature.

Unique piezochromic fluorescence behavior of organic crystal of carbazole-substituted CNDSB

CzCNDSB crystal possesses an inside pore and orderly arrayed channel, which can sense external pressure from 1.0 atm to as high as 9.21 GPa reversibly and reproducibly, accompanied by visible color changes.

Mechanosensitive membrane probes

This article assembles pertinent insights behind the concept of planarizable push-pull probes. As a response to the planarization of their polarized ground state, a red shift of their excitation maximum is expected to report on either the disorder, the tension, or the potential of biomembranes. The combination of chromophore planarization and polarization contributes to various, usually more complex processes in nature. Examples include the color change of crabs or lobsters during cooking or the chemistry of vision, particularly color vision. The summary of lessons from nature is followed by an overview of mechanosensitive organic materials. Although often twisted and sometimes also polarized, their change of color under pressure usually originates from changes in their crystal packing. Intriguing exceptions include the planarization of several elegantly twisted phenylethynyl oligomers and polymers. Also mechanosensitive probes in plastics usually respond to stretching by disassembly. True ground-state planarization in response to molecular recognition is best exemplified with the binding of thoughtfully twisted cationic polythiophenes to single- and double-stranded oligonucleotides. Molecular rotors, en vogue as viscosity sensors in cells, operate by deplanarization of the first excited state. Pertinent recent examples are described, focusing on λ-ratiometry and intracellular targeting. Complementary to planarization of the ground state with twisted push-pull probes, molecular rotors report on environmental changes with quenching or shifts in emission rather than absorption. The labeling of mechanosensitive channels is discussed as a bioengineering approach to bypass the challenge to create molecular mechanosensitivity and use biological systems instead to sense membrane tension. With planarizable push-pull probes, this challenge is met not with twistome screening, but with "fluorescent flippers," a new concept to insert large and bright monomers into oligomeric probes to really feel the environment and also shine when twisted out of conjugation.

Design and Synthesis of Mixed Oligomers with Thiophenes, Dithienothiophene S,S-Dioxides, Thieno[3,4]pyrazines and 2,1,3-Benzothiadiazoles: Flipper Screening for Mechanosensitive Systems

Monomers with large surface area and high quantum yield, that is fluorescent flippers, have been engineered into twisted push–pull oligomers to create membrane probes with high mechanosensitivity and long fluorescence lifetime. Here, the synthesis and characterization of thieno[3,4]pyrazines and 2,1,3-benzothiadiazoles are described in comparison with the original dithienothiophene S,S-dioxides. Dithienothiophene S,S-dioxide flippers are confirmed as the best reported so far, and poor results with single flipper probes support that two flippers are needed for the probe to really “swim”, that is, for high mechanosensitivity.

Fluorescent flippers for mechanosensitive membrane probes

In this report, “fluorescent flippers” are introduced to create planarizable push–pull probes with the mechanosensitivity and fluorescence lifetime needed for practical use in biology. Twisted push–pull scaffolds with large and bright dithienothiophenes and their S,S-dioxides as the first “fluorescent flippers” are shown to report on the lateral organization of lipid bilayers with quantum yields above 80% and lifetimes above 4 ns. Their planarization in liquid-ordered (L_o) and solid-ordered (S_o) membranes results in red shifts in excitation of up to +80 nm that can be transcribed into red shifts in emission of up to +140 nm by Förster resonance energy transfer (FRET). These unique properties are compatible with multidomain imaging in giant unilamellar vesicles (GUVs) and cells by confocal laser scanning or fluorescence lifetime imaging microscopy. Controls indicate that strong push–pull macrodipoles are important, operational probes do not relocate in response to lateral membrane reorganization, and two flippers are indeed needed to “really swim,” i.e., achieve high mechanosensitivity.

Reversible piezochromism in a molecular wine-rack

Coupling of a ‘wine-rack’ lattice motif with molecular flexibility leads to a large piezochromic response in an organic material.

Piezochromic luminescence behaviors of two new benzothiazole–enamido boron difluoride complexes: intra- and inter-molecular effects induced by hydrostatic compression

The different piezochromic luminescence behaviors of two new boron difluoride complexes were investigated.

9,10-Bis(N-alkylindole-3-yl-vinyl-2)anthracenes as a new series of alkyl length-dependent piezofluorochromic aggregation-induced emission homologues

AIE active 9,10-bis(N-alkylindole-3-yl-vinyl-2)anthracene homologues (IACn) could be facilely prepared and exhibit alkyl length-dependent piezofluorochromic properties whose spectral shifts increase with the decrease of N-alkyl chain lengths.

A fluorescent, photochromic and thermochromic trifunctional material based on a layered metal–viologen complex

A 2D layered viologen-based zinc complex exhibits the rare discolored function of reversible photochromism and thermochromism. Interestingly, its fluorescence can be switched by visible light irradiation and heating in air.

Stimuli responsive reversible high contrast off–on fluorescence switching of simple aryl-ether amine based aggregation-induced enhanced emission materials

Aryl-ether amine based simple Schiff base molecules showed rare stimuli responsive off–on fluorescence switching with high contrast.

Response of strongly fluorescent carbazole-based benzoxazole derivatives to external force and acidic vapors

The nanofibers have enhanced emission and exhibited an isothermal reversible mechanochromism. Furthermore, acetic acid vapor may selectively act as stabilizer and developer to retain the information imparted by mechanical force.